Mcp proximity top side

When run the AST show this error under Sensors in red: MCP Proximity Top Side: 71
Anyone knows what this means?

Sorry to hear that... :-)
Is this a new process?
If no, Is there a separate location in FDM used for JE's?
Typically, a topside adjustment would be done in HFM. You can feed it from FDM, but it's more work than usually makes sense.
Chris

Similar Messages

  • In the time line, cutaways and titles are supposed to be linked on the top side of movie clips in the time line window.  I don't know what I did, but now they are linked to the bottom side.  How do I get them up to the top where they belong?

    I'm working on a movie in FCP and using cutaways and titles in many places in the timeline.  While working on a movie 2 days ago, and I don't know what I did, all the cutaways and titles are now linked to the movie clips from below rather than above.  When I "grab" them and drag them up to the top-side, as soon as I "release", they go back down.  Along the menu bar, I've check the "view", "modify", "clips", etc., looking for any thing that might refer to appearance of the time line.  What must I do to get the cutaways and titles back on top where they belong?  The audio clips remained properly-linked to the time line and play properly.  The cutaways and titles can be seen but do not play. 

    The cutaways and titles should be linked above the timeline clips, not below

  • Text in Line Items for BCS top side entry

    Do any of you experts out there know of a way to enter text in bcs line items for top side entries?
    Thanks
    Tim

    Dear Charles,
    I understand that you are asking for line item texts in BCS. This can be acheived by an enhanecemnt in the code and I have done it before. this code is there in an OSS note and you can apply this note by using transaction SNOTE. (Can u pls check the oss and u can fix it asap. If u dont find  the same let me know. I was checking this in my laptop and I ahve to go for a meeting now). I confirm that u can fix this in 5 minutes with that note.
    You will see the line item texts in the screen after that.
    Pls let me know if it helped.
    Thanks & Rgds
    Samir Neji

  • Top side entry in FDM?

    Hello,
    Your expertise in this matter would be really appreciated. I have been asked to create a topside journal entry in FDM for Cost of Sales.
    Now, every other source that I look into top side entries made only in HFM, but the financial reporting team has advised that we use these entries in FDM. could you please advise as to how and whether this is possible and what is the process/ logic or rules that define it?
    Thanks,
    Andy.

    Sorry to hear that... :-)
    Is this a new process?
    If no, Is there a separate location in FDM used for JE's?
    Typically, a topside adjustment would be done in HFM. You can feed it from FDM, but it's more work than usually makes sense.
    Chris

  • Exporting Top Side Entries

    We have a current business need to export our top side entries and load them to Essbase. (I understand it is not best practice, but this is a step for our future state of best practices.) Does anyone know how to do this? We are on 9.3.3 and will be upgrading to Fusion in the near future.
    Thank you in advance.

    I'm not sure what best practice would be, but considering it's not even possible to extract all JV line item detail to Excel in 9.3.3 from the front end, there probably/unfortunately isn't one. We query the production tables directly via an ODBC connection and have a script to run it twice/day during close. The query outputs the detail to Excel file(s) on our SharePoint site. I'm sure you could set it up to create a text file instead to feed Essbase (or maybe even load Essbase directly).

  • Top side of x axis

    Using 6i Reports I was able to put some labels on the top side of the x axis . ( Top side means - Consider a rectangle as the plot area of the graph .. then the upper side of the rectangle) . I have converted everything to reports 9i and using its Graph . I don't see any feature to put the labels on the top .
    Please give some suggestion to achieve this .

    Hi B1260,
    what about this example?
    You didn't show an example of what you really want! Do those x-values are just growing, but not evenly spaced numbers? Or any other kind of numbering?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    Unbenannt 3_LV80.vi ‏13 KB

  • When I open LinkedIn, there is on the top side a bar. How can I remove that?

    Thhe bar appears evrytime just at the top of my account. Then is not to see what's written on that top.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Count record total on Top side

    Hi Gurus,
    i have a issue in my BIP report. I have to display total records info on Top place. for example
    Category - It is a Group
    Subcategory --it is also group
    Total: 3 -----------------------------------> i have to display SNO records here (here it contains 3 records, so it has to display 3)
    SNO status
    1 4
    2 2
    3 1
    subcategory -- Group here
    Total: 4--------------------------------> because it contains 4 records it has to display 4
    SNO Status
    1 2
    2 3
    3
    4
    when i put Total bottom place it is working fine. Please help me.
    Thanks,
    vas

    Can you send me the xml file and RTF to [email protected]?
    Thanks,
    Bipuser

  • Top Side Entries - Best Practice to push back to GL

    Hello,
    I'm trying to determine the best practice to get the adjustments made in FM back to the GL. The GL requires more dimensionality than FM captures. How have you done this in the past?
    Thanks!

    After each close period, we extract all JV line item detail directly from the HFM database and put it into Excel. We then have a macro which parses the file and emails each of our accounting region contacts their detail. The regional contact will then be accountable for ensuring each legal entity accountant in their region gets the information pushed back into the appropriate source system. At a corporate consolidations level, we don't attempt to provide too much guidance on the other dimensions which don't impact our HFM financials.

  • Perspetive Grid: how do I draw a cube showing only the TOP side and the FRONT side using perspective grid?

    My problem is that 1-, 2-, and 3-point perspectives do not semm to provide the perspective I need. and suggestions?

    There's no attachment.
    You need to upload your sketch via the forum web interface.

  • Is there any way to create a shadow in both sides of a box?

    Hi,
    is there any way to create a shadow in both sides (opposite) of a box? I just can create the shadow in one side..
    If not, is that possible in CS6?
    CS5.
    Regards

    You can definitely show an inner shadow on just one side of a rectangle.  You just need to turn the blur down to 0 to prevent it from leaking to the nearby sides.  Then set the angle to an exact multiple of 90, like 270 to put the shadow on the top side of the rect.
    This file has some examples: http://johndunning.com/fireworks/scratch/Shadowed%20Elements.png
    If you're trying to simulate a rectangle with different border colors or widths, this auto shape can make that easy: http://johndunning.com/fireworks/about/MultiBorderRect

  • Get rid of the white space at the top and bottom of the report when Printing as PDF document

    Hello All,
    I have a wider tablix report which is 29 inches wide. I have given the paper size as custom and width as 29 and height as 11 in report properties.I have deployed it and saved it as PDF document. When I print preview the report I am using the paper size as
    tabloid (17 by 11) and selected the orientation as Landscape. I am getting the full report without any stripping but I am getting some extra space at the top and bottom when I print the report. Can anyone help me how to get rid of this space? . I checked the
    margins for the report and it was 0in. Please help.
    Thank You

    Hi There
    In Reporting Services (SSRS 2008), there are white spaces preserved in the report body by default. When the white space extends the body size beyond the width of the report, blank pages will be generated. To avoid the issue, you can set the “ConsumeContainerWhiteSpace”
    property of the report to “True”.
    Please try to adjust your margins (top + side) and hopefully this problem will get resolved
    Body Width <= Page Width - (Left Margin + Right Margin)
    Horizontal usable area:
    X = Page.Width - (Left Margin + Right Margin + Column Spacing)
    Vertical usable area:
    Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
    Body Width <= Page Width - (Left Margin + Right Margin)
    Horizontal usable area:
    X = Page.Width - (Left Margin + Right Margin + Column Spacing)
    Vertical usable area:
    Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
    If you have any questions please ask.
    Many Thanks
    Syed Qazafi Anjum
    Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

  • Changing dimensions of each side individually

    Hi everybody,
    I'm new to the forum but not new to photoshop. I've come across the following problem while using photoshop. I've got a rectangle with given dimensions. Say my original rectangle is 15x30 cm.
    Now I want the the top side to have dimensions 10 cm
    The bottom side dimensions 9cm
    The left side dimensions 25 cm
    and the right side dimensions 26 cm.
    I don't want to calculate all the angles (and use the skew tool) but just want to insert these numbers accordingly and change the original rectangle.
    Does anyone know how to do this?
    Thanks!
    Adnan

    You might try using guides and the ruler.
    First put guides at the corners of the object, put the zero point origin at the left side of the object, put guides at the measurements you want and then use transform>distort to move the corners.
    Make sure you have Snap-to enabled so everything snaps into place.
    before:
    l
    after:

  • Top frame not reloading on each submit of JS Page

    I have weblogic portal, in which initial page or index page is made of three frames top, side and center. Whenever user performs any action, side and center frames reload properly but top frame never after initial load.
    Any idea ? why top frame is not refreshing after initial load? and how to fix this problem?

    This seems to be more like an html issue than a portal one. Are you giving the target correctly when you click a link e
    etc?
    Also dont use frames with weblogic portal unless you know what your doing(where each frame points to a portal page).
    And dont use frames if you can avoid it.
    regards
    deepak

  • IE Browser zoom level problem (Avoid missing Left/Top portion)

    When the user set the zoom level in Internet explorer to 125 or 150, there are some missing portions (left and top) of my flash object.
    Is there any way to avoid this ??? or at least forcing the display of the Left and top side
    For some reason I have lost almost all the day on this with no luck so far
    Thanks

    Many hours later and the only fix I can do is to "hack" the scaleX/Y to force zoom to 1:0  ...this way to content is not affected by the browser zoom level.
    Any better solution to prevent my flash to be incomplete (left/top) when the user use the browser zoom feature??

Maybe you are looking for

  • Oracle ADF Essentials can used in Production as free licenced

    Hi All, I have few questions wrt to Oracle ADF Essentials Freeware. Recently Oracle release a pressnote that Oracle ADF Essentials is a free ware. So it can also use in production mode? I want use this in creating Monitor page for SOA in my project.

  • Loading a program through terminal

    Hi im not exactly sure what command to use in xterm when i want to load a certain program. how do i go about finding what command to use, to load the program i want? so far ive figured out that typing in the name of most programs in xterm will then l

  • New Server: How do we aim ALL users email accounts to use the new addresses

    We have a new server which we are using for mail (incl. smtp), we need to be able to make it so when a user logs in and loads mail (just like they would have done before) it finds their new email account as seamlessly as possible. In a windows enviro

  • Sourcing/CLM 7 /IE 8: E-Sourcing cannot display this page.

    Good Afternoon, We are experiencing the following issue when logging out of Sourcing/CLM: 1) Log out 2) Try to log back in and recieve the following page: E-Sourcing cannot display this page. Click the browser back button to the previous page. I can

  • Why are my photos below and not to the right?

    I have a layout problem and it's driving me nuts. The code I have for a page is a hodgepodge of sorts and I cannot, for the life of me, figure out how to get two pictures to be on the right hand side. This is what I want it to look like: But all I ca