MCPro4.1 -cannot upgrade past IOSX 10.5.8 and now cannot transfer from itunes to my 4s which is upgraded to IOS7. What can I do?

I have a MacBook Pro 4.1.
I have been unable to upgrade the software beyond OSX 10.5.8.
I have an iphone 4S and have previously been able to transfer tracks from itunes to the phone but now - though I can download music to the laptop, I cannot transfer them to the phone as I get an error message saying I need Itunes 11.1 which I have downloaded but I cannot run apparently because of the old operating system. Is there any way 'round this - without going back to the old OS on the phone?

To get to the next stage, Mac OS X 10.6, you will need to BUY a 10.6 DVD from the Apple Online Store and have them ship it to you. Once you have Installed, Update to 10.6.8, and a much newer version of iTunes will become available as an Update.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Similar Messages

  • Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

    I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

    Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
    I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

  • On a MS Vista platform I just "upgraded" to Firefox 10.0.2 and now cannot connect. My wireless devices go throught the same DSL line and work. fine. 9.0.1 (previous version) worked fine. Suggestions?

    I just "upgradd" to Firefox 10.0.2 and now cannot access the internet. This is an MS Vista platform. Wireless devices, through the same DSL line, are still fine, suggestions?

    Did you try to view this article? [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Problems connecting after Firefox Update]
    You should also try using Firefox in [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode]
    Thanks,
    Borian

  • TS1398 i upgraded my 4S to 6.0 and now cannot access my netgear router at home.  I turned security off buw will still access.

    I upgraded to 6 but now cannot access my Nergear router at home.  I have deleted security and reset networks, but no luck.

    still doesn't work
    upgtaded to 6.01, still doesn't work
    changed from WEP to no security, still won't connect
    changed to WPA today, still doesn't connect at home

  • Just Upgraded to Firefox 8.0.1 and now cannot use Firefox preview in Dreamweaver CS5.5...any one else have this issue? I have seen this before in previous version of Firefox but got fixed.

    Not able to use firefox browser preview in Dreamweaver CS5.5 after upgrade to version 8.0.1. Now can preview only in Safari.

    Don't know if there is an option make the download window stay up, but you can bring it back with Ctrl+J then right-click on the download to open the folder it was downloaded to.
    * keyboard shortcuts -- http://dmcritchie.mvps.org/firefox/keyboard.htm
    Where files get downloaded to is in your '''about:config''' settings.
    * [http://kb.mozillazine.org/About:config About:config - MozillaZine Knowledge Base]
    * [http://kb.mozillazine.org/About:config_entries About:config entries - MozillaZine Knowledge Base]
    check out variables beginning browser.download.

  • I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

    I have an iphone 4 and an HP Pavillion with windows 7.  I always have been able to connect my iphone to my laptop and open
    the DCIM folder and see the picture icons so I can pick the ones I want to download.  After upgrading to iOS8 I cannot see the icons after a
    few seconds of connecting the phone to the computer.  They all turn into the windows icon.
    I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred.  I don't want all the pictures I take on my computer.

    http://support.apple.com/kb/HT1808

  • Hi All. I reluctantly upgraded to IOS 7 last night and now cannot access my home WIFI, all other non Apple devices are fine. I have reset, it will not allow me to 'forget this network', doesnt show the option. I have turned on and off

    Hi All, I reluctantly upgraded to IOS 7.1.1 on my IPAD last night , reluctant as every upgrade which promises fixes which dont impact me causes problems that do , which I fix via this community. Today I can no longer access my WIFI at home, my non Apple devices all work fine.I have tried all the online suggestions I can find for this, reset facgtory settings, it will not allow me to 'forget this network', I try to reconnect and it asks for my password which I know is correct and it says it cannot access my network. It can access an unsecured one I believe, but that is not ideal. Any fresh suggestions would be really welcome, please. Many thanks

    Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

  • I accepted iOS 8.3 upgrade last night on our iPad and now cannot turn it on - get as far as a black screen with the picture of the charger and itunes logo - help please!

    I accepted the latest 8.3 iOS upgrade last night which resulted in my not being able to turn on the iPad.
    Following the troubleshooting guidelines I can get as far as the black screen by forcing a restart (holding both buttons) all I can see is the diagrammatic picture of the charger and the iTunes red logo. I cannot move on from here and the instructions indicated that a message should show offering the iOS upgrade - but this is not happening for me!
    If anyone can help it would be hugely appreciated - many thanks.
    I think we have an iPad 2 (approx. 2 years old)
    Tracey

    Thank you for using the Apple Support Communities
    It sounds like your iPad is in recovery mode after an error in the update process that may have occurred. The solution to this would be to plug it into a computer running the latest version of iTunes and press the restore button. This will ease the iPad and reinstall iOS. Hopefully you setup an iCloud or iTunes backup for the device.

  • Upgraded to Xcode 3.1.3 and now cannot built to iPhone

    Hello,
    At first I was getting this error:
    a valid signing identify matching this profile could not be found in your keychain
    So I removed by Cert and Provisions and rebuilt them all following apple's instructions.
    Now I'm getting this error:
    Code Sign error: a valid provisioning profile matching the application's Identifier 'com.yourcompany.AppName could not be found
    Which I cannot find a solution for ...
    Here's more information -
    + I upgraded to 3.1.3 and Itunes 8.2
    + Everything has been working fine
    + Did a reboot - BAM, everything broke.
    I can only build in the simulator, I cannot build to the device when selecting 'Device 2.2.1 | Debug'.
    Total PITA apple.
    - sk

    I ran across this post that may be of help:
    jdandrea wrote:
    In Organizer, recall that I "Dragged-and-dropped my downloaded provisioning profile into the appropriate spot in the Organizer." The key word here is Appropriate.
    I only dragged-and-dropped it into the "Provisioning" section under my "iPod Touch" device summary. HOWEVER ... I did not drag-and-drop it into the "Provisioning Profiles" section under "iPhone Development". Until now.
    Build ... and ... TA-DAH!
    http://www.iphonedevsdk.com/forum/iphone-sdk-development-iphone-os-3-0/17999-pro file-doesn-t-match-application-identifier-2.html

  • Upgraded to OSX 10.6.8 and now cannot print to Xerox Phaser 6180DN

    Since upgrading to OS X 10.6.8 on 23rd June I have found that printer reports as "paused".
    If you click "resume" it apparently accepts the command but then comes back immediately as "paused".
    Any advice would be appreciated (though I suspect it is a glitch in 10.6.8.)
    (I have seen a similar report on the Xerox support website)

    Apple clobbered the PS drivers - the fix for this has been poseted - see:
         https://discussions.apple.com/message/15498216

  • I upgraded to Firefox 6.0.2 and now cannot download websites in the .mht format.

    Previous versions of Firefox allowed me to download web pages as .mht files.
    Firefox 6.0.2 will not.
    I now have to switch to Internet Explorer 9 when I want to download web pages in the .mht format.

    You should be able to find an addon that will allow you to save and open .mht files. For example:
    http://maf.mozdev.org/

  • A message "MSVCR80.dll" cannot be found appears on my screen when I try to open iTunes but I am unable to do so. What can I do?

    A message "MSVCR80.dll" cannot be located to open iTunes. This occurred after I attempted to download a new iTunes update. How do I fix this issue?

    First, uninstall all Apple products from your Control Panel.  There should be 4 itmes.   1.Apple Application support, 2.Apple Mobile Device Support, 3.Apple software Update, and 4. iTunes.
    Second, reboot the system.
    Third, go to www.apple.com/itunes/ and download iTunes.  Be sure to allow to install (.exe) as an administrator.
    That's it.  You should get back to your old iTunes (latest version) and it's library.
    Message was edited by: nkg0319

  • I upgraded Mac to 10.9.2 and now I am having itunes problems

    I plug my iphone 4s into mac via usb port, it charges but the iphone area on itunes is greyed out and keeps spinning. iphone never connects to itunes so I can't sync or change playlists etc...
    Any ideas? I assume it is software, as the day before the update everything worked fine.

    I can't search on my network server. My local search works just fine.
    I have only updatet my Maverick. It was a generel mac update.

  • I upgrade my Mac mini to lion and after it was installed , there was no output signal on my Mac mini , what can i do??

    What can i do ?? It seems that the only thing that doesnt work its the output

    I already fix it you just have yo turn on your mac and press and hold command + option + p+ r and just wait until the screen comes up and that it

  • I recently upgraded my phone to 5.0 and now I cannot access any of the ringtones I have purchased.  They are on the desktop but will not transfer to my phone.  Any suggestions?

    I recently upgraded my phone to 5.0 and now cannot access my ringtones theat were purchased.  They are in my itunes on the desktop but won't sync to my phone.  Any suggestions??

    OK. In iTunes on the computer, since you have the ringtones there, one simple method to try would be to drag them to the desktop, and then directly from the desktop to your phone in the Devices menu in iTunes.

Maybe you are looking for

  • Display a specific structure based on user input

    Hello All, I have a aging report in which one aging is based on Group currency and the other aging based on Document currency, user should be able to specify which bucket he wants to see as a input selection and the report should only display that ag

  • Sony Marine Audio trouble

    Hello, i have a Time clock problem with my CDX-GT650UI,everytime i power on/off the car the time(clock) reset itself , i checked the fuse behind and its ok.What can be the problem?

  • Double Bar Scrolling

    Hi friends, I have a report with more that 20 columns which is navigating from the theme page when i scroll it with a browser horizontal bar. Since i dont want the theme page to navigate when i scroll it with a browser horizontal bar. I have look int

  • Change structure for list editing of functional location

    What is the significance of change structure for list editing (t code il04) of functional location?

  • Yosemite made my Macbook air 2014 extremely slow!! Help?

    After I updated to Yosemite, everything has been extremely slow and lagging!! I am not good with computers and I don't have a back up drive or stuff like that .. Is there any way to fix this??