MCSI report with two dimension

Hello
In MCSI, it is possible to get sales report according to a group of criterias and to drill down according to an other group of criterias. However it would be also convenient to to get a sales report with two dimensions instead of drilling down in order to analyze with Excel Pivot Table. Is there a way to create a specific structure or something to get it done?
Thanks
sb

Great thanks!
However the two dimension that can be used do come from the first drill down criterias list. However it seems not possible to select a dimension from the second lists with the matrix function. Is there a way to stil get it from the second list as well ?
thanks
sb
Edited by: STANISLAS BRESIN on May 23, 2011 10:38 AM

Similar Messages

Report with multiple dimensions in Row and Column with EvEXP

Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
Kenya

Thank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column　because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya

Report with two Command is empty if one of the two commands returns no data

Hi all,
I have a report with two Commands not linked together.
If ONLY one of the two Commands returns no data, the full report is empty (although the other Command returns data).
I'm using Crystal Report 2008 and the CRJ 12.2.205
Have an idea?

Hi Ted,
how can I solve the problem, please? It is important.
If I can help yourself, the problem is appeared in many reports since I updated the library (the old library version 11.8.4.1094 works fine with all). I'm waiting for your answer, please.
Thank you very much.

Summary Report with 4 Dimensions and 5 Facts

Hello OBIEE Czars:
I have a problem.
I am trying to make a summary report with 4 Dimensions and 5 Facts.
Out of that only 2 Dimensions are Confirmed.
Now when I try to bring in all the facts, I get view display error.
I searched forum for similar issues.
So I have tried following so far.
1) Add other dimensions as source and set level to Total for those dims.
- After doing this, I dont get view display error, but I get blank rows for couple of facts.
2) I am already aggregating all the measures.
Please help me out.
This forum has been very helpful so far.
Thanks.
~Vinay

Hi
This method seems fine until you run a request that includes a filter on an unconformed dimension.
The SQL itself should be quite straightforward (see below) but the BI Server instance does not seem to be joining this data correctly after posting the 2 separate queries to the database.
SELECT
x.dim1, x.dim2
x.fact1_agg_measure
y.fact2_agg_measure
FROM
SELECT
dim1, dim2
SUM(fact1.measure) fact1_agg_measure
FROM
dim1,
dim2, --UNCONFORMED+
fact1
WHERE
.... .... join fact1 to dimensions as normal
AND dim2 = 'BUSINESS_IDENTFIER'
GROUP BY
dim1, dim2
) x,
SELECT
dim1
SUM(fact2.measure) fact2_agg_measure
FROM
dim1,
fact2
WHERE
.... .... join fact2 to dimensions as normal
GROUP BY
dim1
) y
WHERE
x.dim1 = y.dim1
The result set returned in Answers is firstly a correctly aggregated record plus ALL rows from the second query above ??
Just wondering if anyone else has come across this issue?
cheers
Tony

Report With Two Heading

Hi,
How to create Report With Two Heading
[http://apex.oracle.com/pls/apex/f?p=267:31:]
thanks

See: Re: Two level row header

Report with two layout

Hi,
I have a report with two different layouts that prints one after the other. I would like display the column hading for each layout for all the pages that records.
To say in detail if a first layout prints fo 10 pages the corresponding columns names should be displayed in all the 10 pages. And if the second layout for 2 pages then the 2 layout headers should be displayed.
Kindly let me know how to achieve this.

To say in detail if a first layout prints fo 10 pages the corresponding columns names should be displayed in all the 10 pages.
set the property to print on all pages
And if the second layout for 2 pages then the 2 layout headers should be displayed.
i didnot understand this

BOXIR2 FP4.6 -WebI report with merged dimensions: Incorrect data

Issue: BOXIR2 FP 4.6 -WebI report with merged dimensions: Max value of an object from second query is displayed in the report even when the formula is based on the object from the first Query.
Data displays properly on BOXIR2 SP2.
Steps to reproduce.
1.Use u2018Island Resort Marketingu2019 Universe to create a WebI report.
2. Create a Query with objects u2018Reservation Dateu2019 and u2018Future guestsu2019 and apply a query filter where the u2018Reservation Dateu2019 is between 1/1/2001 and 31/1/2001 an Run the query.
3. Add a second Query with the same objects i.e. u2018Reservation Dateu2019 and u2018Future guestsu2019 and apply a query filter where the u2018Reservation Dateu2019 is between 1/1/2001 and 31/12/2001.
4. Create a report variable MaxDate using the syntax "=Max([Query 1].[Reservation Date]) In Report"
5. Use the objects u2018Reservation Date Query 2u2019, u2018Future guests Query 2u2019 and u2018MaxDateu2019 variable to create a table in the report.
You will find the Maxdate column displays Max date values of u2018Reservation Date Query 2u2019 instead of u2018Reservation Date Query 1u2019.
Could you please advice me on this issue.

Hi Hiteshwar,
MaxDate variable returns a maximum of Reservation date from Query 1 i.e. 1/15/01 which is correct. If you put that variable separately it will display that date correctly but you are grouping it along with objects from the query2 thatu2019s why it is displaying correct value for Query 2 where it finds 1/15/01, but for other values WEBI canu2019t group this value as it refers its formula which contains Query 1 reservation date.
Hence we canu2019t say it is displaying values from Query 2 it is taking values from Query1 itself for 1/15/2001 and for remaining values it is taking non matching values from Query 2 with which it is grouping.
If you put that variable with objects from Query1 it wonu2019t display 1/15/01 but all values reservation date from query 1 contains because it is grouping based on reservation date though it is single max value.
Even when you write "=Max(Query 2.Reservation Date) formula and use it with objects from query 1 though it contains so many values it matches (Groups) only the values from reservation date from Query 1.and displays only those values i.e. 1/1/2001 and 1/15/01.
MaxDate returns 1/15/01 as Maximum Date value from Query 1 but Query 2 contains value far more greater than 1/15/01 hense that will be more incorrect data if WEBI displays maxdate as 1/15/01 along with Query 2 objects.
Here we can avoid this behavior by Custom SQL but MaxDate is a report level variable hence we canu2019t edit SQL.
If your data contains some duplicate values WEBI will repeat MaxDate value like
Reservation date     Restaurant           Future_Guests    Total Guests
1/1/01                          ABC                         3                   3
1/15/01                       XYZ                          4                   8
1/16/01                       XYZ                          4                   8
By default, WEBI Groups Total Guests based on the Restaurant and Reservation Date, but if we want we can group those values based only on Restaurant which will duplicate Total Guest values for Restaurant XYZ. But you report contains only one dimension with all unique Values we canu2019t group those.
I hope this is clear.
Thanksu2026
Pratik

Report with two pages

hi all
I am designing a report which has two pages , i completed first page, i need to insert second page
how to design report with two pages
Thanks in advance
Krish

Hi,
Usually,any report automatically adjusts its page numbers as per the quantity of data that needs to be displayed.However, if your specific requirement is to show certain data on one page and the remaining on another then you can simply insert a group on a valid field.
Following is some information from the Crystal Reports Online Help menu:
New Page After:
- When the End of Section check box is selected, the program inserts a page break after the section.
- The Page Header and Page Footer appear on each page.
- Use New Page After in the Group footer section to print each group on a separate page.
May be, if this is not what you are looking for then please elaborate on the report design/data

Is it possible to create report with two databases in Web Analysis Studio

Hi,
I am new to Hyperion Web Analysis, Could anyone help me out, whether its possible to create report with two databases for eg: OLAP(ESSBASE) and relational.
Thanks & Regards,
Prashanthi.

Hi Mohit,
Thanks for the reply, could you throw out some scenario so that i can try it out.As I am just trying my hands wet on this would like to know in detail & even i have gone through WA user guide but dint get any clue. Please throw some light.
thanks
prasanthi

RE: Report Writer Report with two characteristics

Hi,
I have created a Report with two characteristics - Profit Center and Internal Order(Order) as columns(some columns have Profit Centers and others have Orders). When I run the report, I get the values correctly for Profit Center columns, but the Order columns are empty.
Why do the Order columns not show any values?
Thanks.
S.Vijay

I have given the Record Type and Version in General Data Selection and both are 0.

Matrix report with two across groups

Hi all,
I am facing a problem in making a multi line matrix report.
actually I need to make a matrix report with two "across groups", but unable to get desired result.
if any body has any idea, please share with me.
regards
Ata

No,
you must have only 1 query which extracts all your data:
A,q1,10
A,q2,20
A,q3,30
B,q1,40
B,q3,50
C,q2,60
C,q3,70
Open report builder and create a new report from wizard.
Select the first option accordingly with your requirements and go next.
Type a name for your report in the title field then select "Matrix" as layout and go next.
Select SQL Query and go next.
Type your query.
Select the data you want on the rows (i.e. A, B, C...) and click on the ">" button in the Matrix Row Fields section, then go next.
Select the data you want on the columns (i.e. q1, q2, q3...) and click on the ">" button in the Matrix Column Fields section, then go next.
Select the data you want on the cells(i.e. 10,20,30...) and click on the "Sum >" button in the Matrix Cell Fields section, then go next.
Add some totals, if you need them.
Go next and finish.
Now you have a report with the following layout:
         Q1           Q2            Q3       TOT
A        10           20            30        60
B        40                         50        90
C                     60            70       130
TOT      50           80           150       280Bye
Raffy

Report with two ALV grids and a header

Hi experts,
I have a report with two ALV grids in the same screen, each one in a separated container. The information displays it correctly. The report has been implemented by using OO Programming.
My real trouble is in the header. It must have a logo, a title with a specific font and other information.
I'll attach a capture of my need:
[Report with two ALV grids and a header|http://picasaweb.google.com/lh/photo/AcQD49QPmm-0L_jL2iMedA?feat=directlink]
Then, I want to set up the header you can see, with logo, a font with specific features. Obviously, the header you see has taken from another report. But is the same idea.
I've tried with a third container, using the CL_GUI_CONTAINER and CL_GUI_CONTAINER classes, but it doesn't work.
Any idea? Would welcome any help you can provide.
Thanks in advance,
Jorge Rojas

Hi, Jorge.
Should the header be a"attached" to any of the ALV? Or it should be carried alone?
If first applies, you've given the solution yourself: put the info & logo in first ALV's header and invoke it from the proper method.
You could use CL_GUI_DOCKING_CONTAINER CLASS to divide screen in several containers and then, in the upper one, I would create another one docking container to divide the screen into two: the written info could be performed with an HTML viewer class and the logo with a CL_GUI_PICTURE element.
Cheers.

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

In Top 10 with two dimension i need to add others in my MDX query

Hi this is code working fine and return top 2 product in a state. i need to add other sales also how can we do
with set FIPS as [Geography].[State-Province].[State-Province]
set TCat as
Generate( {FIPS}, CrossJoin( {[Geography].[State-Province].CurrentMember},
TOPCount(
         ([Product].[Subcategory].[Subcategory]),
         2,
         [Measures].[Sales Amount]
SELECT { [Measures].[Sales Amount] } ON COLUMNS,
TCat ON ROWS
FROM [Adventure Works]
hi fond one code it is work for one dimension only, i need for two dimension
WITH
SET [TCat] AS
TopCount([Product].[Subcategory].[Subcategory],10,[Measures].[Sales Amount])
MEMBER [Product].[Subcategory].[Other] AS
Aggregate([Product].[Subcategory].[Subcategory] - TCat)
SELECT { [Measures].[Sales Amount] } ON COLUMNS,
TCat + [Other] ON ROWS
FROM [Adventure Works]

Hi,
We will have to generate a set of tuples that includes both dimensions:
WITH
SET [Top2] AS
Generate
{[Customer].[State-Province].[State-Province].MEMBERS}
[Customer].[State-Province].CurrentMember
,TopCount
(EXISTING
[Product].[Subcategory].[Subcategory].MEMBERS)
,2
,[Measures].[Internet Sales Amount]
MEMBER [Product].[Subcategory].[All].[top2Aggr] AS
Aggregate((EXISTING [Top2]))
MEMBER [Product].[Subcategory].[All].[all Subcat] AS
[Product].[Subcategory].[All]
MEMBER [Product].[Subcategory].[All].[others] AS
Aggregate
(EXISTING
[Customer].[State-Province].CurrentMember
,[Product].[Subcategory].[Subcategory].MEMBERS
[Top2])
SELECT
{[Measures].[Internet Sales Amount]} ON COLUMNS
[Customer].[State-Province].[State-Province].MEMBERS
[Product].[Subcategory].[top2Aggr]
,[Product].[Subcategory].[others]
,[Product].[Subcategory].[all Subcat]
} ON ROWS
FROM [Adventure Works];
If you plan to tweek this solution, you may want to align the dimensionality of the [all Subcat] member with the others members by changing its definition:
MEMBER [Product].[Subcategory].[All].[all Subcat] AS
aggregate(EXISTING
[Customer].[State-Province].CurrentMember
,[Product].[Subcategory].[All]
The former defintion also works in our case because it's a singleton set and it is put in a tuple when crossjoined with the axis 1 giving it the right dimensionality.
Philip,

ALV table with two dimensions and a link in each cell to a document

Hi,
I want to create an ALV output for a 2-dimension table. The table should look like:
--- | Col1 | Col2 | ...
L1 | Cell11 | Cell12 | ...
L2 | Cell21 | Cell22 | ...
Do you have any hints how I could implement such a two dimensional ALV with different links when clicking on Cell11, Cell12, Cell21, ....
Thanks for your help!
Caroline

if u use OO ALV,
1.on clicking CELL1, CELL2 etc, to get different links,
u can put hotspot for the fields in fieldcat
and u can handle method
button_click event of cl_gui_alv_grid.
      CLASS LCL_EVENT_RECEIVER DEFINITION
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
    METHODS HANDLE_CLICK_ROW_COL
    FOR EVENT CLICK_ROW_COL OF CL_GUI_ALV_GRID
    IMPORTING ROW_ID COL_ID.
ENDCLASS.                    "cl_event_receiver DEFINITION
      CLASS CL_EVENT_RECEIVER IMPLEMENTATION
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_BUTTON_CLICK.
    perform button_click using ROW_ID COL_ID.
ENDMETHOD .                    "handle_top_of_page
ENDCLASS .                    "cl_event_receiver
2.
FOR GETTING TWO DIMENSIONS, HANDLE PRINT_TOP_OF_PAGE
and using write statements, build a row at the top of grid.
or else
IN THE LAYOUT , U CAN PLACE BUTTONS JUST ABOVE THE CUSTOM CONTAINER

MCSI report with two dimension

Similar Messages

Maybe you are looking for