MCU Ad Hoc Conference Auto-Disconnect

Dear all,
Is it possible to disconnect all remaning participants from a multiway-created ad hoc conference after person, who create, leave the conference?
Scenario is a person create a multiway conference between 3 conference rooms and after a while leave conference.
I need to auto disconnect other 2 participants.
Is it possible?
Used MCU : 5310 - version 4.4(3.67)
Best Regards,
Mesut

Mesut,
The only way you could do this is by associating the conference creator as the chairperson and the additional participants as guests. Distinguishing between Chairperson and Guests in multiway is not possible.
If you add Conductor this may be possible in the next version with the use of different PINs for chairperson and guests.
Adam

Similar Messages

  • Restricting Ad-Hoc Conferences on 4501 MCU

    Does any one know how to restrict Ad-Hoc conferences on MCU 4501 running 4.3(2.18).  I don't want just anyone to have the ability to create an Ad-Hoc conference from the Auto Attendant on the MCU.

    I don't believe so. Fundamentally there is not much difference between scheduling a conference and then joining it, as opposed to doing an ad-hoc conference on a conversation. Ad-hoc conferences have an 8 hour expiry so you can match that in your
    ConferenceScheduleInformation, along with your other settings, and then join it immediately after scheduling it.

  • Ad-Hoc conference using TC GUI

    I have several TC 7.3 endpoints that are registered to CUCM 10.5 and are able to initiate ad-hoc conferences, using Conductor, by pressing the "Add" button on the Touch 10.  My question is, is it possible to do this though the endpoint GUI?  Adding a second call in the GUI doesn't seem to do the same thing. I'm assuming because CUCM needs the "Add" button pressed to initiate the ad-hoc escalation to conductor.  Thanks  Mike

    Hi Java,
    Thanks for information!
    I have the CUCM 7.1.3, only with the MCU and CUCM can enable this functionality?
    Regards.
    John.
    De: javalenc
    Enviada em: sábado, 31 de março de 2012 01:18
    Para: João Fernando Faria Rosa
    Assunto: - Re: Customizing Ad Hoc Conference
    Home
    Re: Customizing Ad Hoc Conference
    created by javalenc in Other Collaboration, Voice, and Video Subjects - View the full discussion

  • Customizing Ad Hoc Conference

    Hi,
    I wonder how is possible using an ad hoc videoconference showing in my ip phones and softphones all participants simultaneously in reduced size. I've seen this feature enabled, but I wonder how to enable, wanted to know if I need any additional application.
    Thank you!
    John.

    Hi Java,
    Thanks for information!
    I have the CUCM 7.1.3, only with the MCU and CUCM can enable this functionality?
    Regards.
    John.
    De: javalenc
    Enviada em: sábado, 31 de março de 2012 01:18
    Para: João Fernando Faria Rosa
    Assunto: - Re: Customizing Ad Hoc Conference
    Home
    Re: Customizing Ad Hoc Conference
    created by javalenc in Other Collaboration, Voice, and Video Subjects - View the full discussion

  • HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

  • Ad hoc Conference restrictions

    I have an India CUCM Cluster that needs to have restrictions on ad hoc conference calls that are being made between three participants (1-India PSTN caller, 2-Internal India Cluster phone and 3-Internal North American Cluster). India law doesn't permit this type of a call to happen.  
    What is the best way to restrict the India PSTN to be connected to the North American Cluster?
    Thanks,
    Jim

    Hi Jim,
    This problem was solved by cisco back in cucm7, the docs can be found here.

  • Wifi Auto disconnect after 5-10 of sleep.

    Here's my technical data:
    Iphone 4s
    iOS 8
    I connect to wifi and lock my phone, after 5-10 minutes of sleeping the wifi auto disconnect.
    To test this, I tried sending a LINE message and as expected, I didn't receive the message.
    Is this a problem with the OS or is it normal for wifi to disconnect automatically?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    * No data is lost due to a reset

  • Wrt610n v2 auto-disconnect with DHCP?

    I have my wrt610n v2 for several months. It work perfectly with my giga lan.
    Recently, I have brought an IP cam and I would like to see my baby with my iphone. I have followed the user guide and setup everything with wireless setup with my IP cam and router port forwarding as well as DDNS.
    However, it works only when my computer has switched on.
    I have tried to use the remote management function of the router with iphone to access the admin console during my workstation has switch off for a long while and i found that i am not able to access the admin page.
    Then I try to switch on the computer again and i found that the admin console page can be access again from my iphone.
    The behaviour is just like the router has been disconnected if there is no network connection detected for a long while.
    So i tried to give up the wireless connection of the IP cam and connect the IP cam directly to the router with lan cable. The behaviour is the same.
    I am using automatic Configuration - DHCP which does has the "Keep alive" setting.
    And I have already using the most updated firmware.

    Here is the result of the test as you requested:
    1) Try disconnecting the Ethernet cable between your main computer and router.
       Disconnect the Ethernet cable from the router and main computer and see if you can access the IP Cam.
    Ans: Not able the connect to the ip-cam from WWW.
    2) Do you have any other wired or wireless computer in the network?
    Ans: No
    3) You have Iphone. Connect Iphone to the wireless in your network and see if you can access Internet on Iphone. Now switch off the main computer and check if you can access the Internet on Iphone when connected to your wireless network.
    Ans: Originally I cannot connect to the ip-cam with my iphone without wifi connection. After I make wifi connection and access to the internet with my iphone, I can access the ip-cam again. In this test, my computer has remained turned off. But i think this situation is the same as that I have switched on my computer to requesting internet access from the Lan since my iphone is creating internet connection from the Lan.
    The end result told us that the router will auto-disconnect with internet DHCP for a certain idle period which without requesting internet connection from in the Lan.
    I don't think the ip-cam design is for the user to access it with local lan connection. If I want to access my ip-cam, I should not at my home and all the other computer equipments should be switched off with only my ip-cam and router has turned on.
    However, in this situation, the router will auto-disconnect because of there is no internet connection requesting from the Lan and therefore I am not able to access my router as well as my ip-cam from the WWW.
    If this is true, I don't think this router can be use for the situation if there is ip-cam at home. That really bad!
    Looking for solution for this case.

  • CCM 4.1 ad hoc conference drops first participant

    Hi All,
    Not sure if anyone can help here:
    My problem is in one of my locations, when a user does an ad-hoc conference using the softkey, and they join another party in to the conference, the first dialled number is being dropped...
    Has anyone come across this before? Any known fixes?
    Thanks

    Hi!
    It could be caused by a codec issue. Check what codecs are you using between regions. Remember that if you are using a SW CFB it only speaks G.711 so probably you will invoke a XCODER. If the first user does not have a XCODER on the MRGL on his DP the call might fail.
    Hope this helps.

  • How Can I Disable AD-HOC conference(Meet Now )

    Dear
    How Can I "Disable Ad-Hoc Conference" in our Organize and Disable Meet now conference in lync client by CS- policies  ?

    I don't believe there is a way to specifically disable "Meet Now" from the Lync client. Are you looking to disable all meetings, or just those through the Meet Now (ad-hoc) button.
    You could use Set-CsConferencingPolicy set the maximum meeting participants to "2" if you intend to disable conferencing altogether. It's probably not ideal.
    Is there a specific reason why you want to disable it?
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • MCU 4501 personalize Conference Room.

    Hi there,
    Is there any way to personalize a Conference Room, like when a participant conect to one room, instead of the default wallpaper, display a personalized one.
    The point is to have diferent wallpaper for each Conferecen Rooms.
    Software version 4.3(1.68) 
    Build 6.18(1.68)
    Thanks in advance

    It could be that your auto attendant is set to only show selected conferences under "Accessible scheduled conferences" in the specific auto attendant options under Conferences > Auto Attendants.
    Is it only select conferences, or all conferencing that aren't appearing?

  • Ipod 7th gen auto disconnects from ITunes

    Hi,
    I got a new IPod Shuffle for Christmas and every time I connect it to ITunes it auto-disconnects after about 30 seconds- does anyone know how to stop this happening?
    Many thanks
    Alex

    Thanks for the welcome and the help!
    I tried putting it in disk mode as you suggested and it's still disconnecting from iTunes right after it syncs.
    I was afraid that I would have to do a restore. I have over 13000 songs on my iPod, many that are no longer in my iTunes library. I used to delete my albums off my hard drive after I ripped them off of CD and transferred them to my iPod. I didn't have the hard drive space back then.
    This is my dilemma. I'm worried that maybe the iPod is damaged and I won't be able to add my music once I've done the restore. Right now it plays fine, I just can't add or delete any more music. Maybe it's time to buy a new one.
    Thanks again!

  • Vg224 don't auto disconnect with analog phone

    Dear all ,
    why vg224 don't auto disconnect with analog phone? is the busy frequency dismatch between vg224 and analog phone?
    can you have any suggest to me ?
    thks.

    HI rrjoas45,
    thks your answer, I try to add a command with supervisory . but I discovery it isn't effective . the port status follow:
    sh voice port 2/0
    Foreign Exchange Station 2/0 Slot is 2, Port is 0
    Type of VoicePort is FXS
    Operation State is DORMANT
    Administrative State is UP
    The Last Interface Down Failure Cause is Administrative Shutdown
    Description is not set
    Noise Regeneration is enabled
    Non Linear Processing is enabled
    Non Linear Mute is disabled
    Non Linear Threshold is -21 dB
    Music On Hold Threshold is Set to -38 dBm
    In Gain is Set to 0 dB
    Out Attenuation is Set to 0 dB
    Echo Cancellation is enabled
    Echo Cancellation NLP mute is disabled
    Echo Cancellation NLP threshold is -21 dB
    Echo Cancel Coverage is set to 64 ms
    Echo Cancel worst case ERL is set to 6 dB
    Playout-delay Mode is set to adaptive
    Playout-delay Nominal is set to 60 ms
    Playout-delay Maximum is set to 250 ms
    Playout-delay Minimum mode is set to default, value 40 ms
    Playout-delay Fax is set to 300 ms
    Connection Mode is normal
    Connection Number is not set
    Initial Time Out is set to 10 s
    Interdigit Time Out is set to 10 s
    Call Disconnect Time Out is set to 60 s
    Supervisory Disconnect Time Out is set to 750 ms
    Ringing Time Out is set to 180 s
    Wait Release Time Out is set to 30 s
    Companding Type is u-law
    Region Tone is set for CN
    Analog Info Follows:
    Currently processing none
    Maintenance Mode Set to None (not in mtc mode)
    Number of signaling protocol errors are 0
    Impedance is set to 600r Ohm
    Analog interface A-D gain offset = -3.0 dB
    Analog interface D-A gain offset = -3.0 dB
    FXS idle voltage set to high
    Ring DC offset set to 0 volt
    Station name None, Station number None
    Translation profile (Incoming):
    Translation profile (Outgoing):
    Voice card specific Info Follows:
    Signal Type is loopStart
    Ring Frequency is 25 Hz
    Hook Status is On Hook
    Ring Active Status is inactive
    Ring Ground Status is inactive
    Tip Ground Status is active
    Digit Duration Timing is set to 100 ms
    InterDigit Duration Timing is set to 100 ms
    Hookflash-in Timing is set to max=1000 ms, min=150 ms
    Hookflash-out Timing is set to 400 ms
    No disconnect acknowledge
    Ring Cadence is defined by CPTone Selection
    Ring Cadence are [10 40] * 100 msec
    Ringer Equivalence Number is set to 1
    thks.

  • Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

    as title
    My usb mouse auto disconnect and reconnect time and time,
    no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
    Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
    Mouse: Logitec G400/G1
    Display:Lenovo D2081WIDE
    machine:T430 2349 CTO

    system info:
    machine TYPE: THINKPAD T430 /2349CTO
    operating system :Lenovo OEM ultimate X64 SP1
    mouse type:Logitech G400 and Logitech G1
    time:from 2012-10 to now
    threat NO.1
    USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
     every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
    threat NO.2
    Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
    threat NO.3
    the battery auto losing capacity!!!!!!
    1% everyday about 0.2Wh
    since I bought to now,
    the Design capacity has losing from 57.XX Wh to 47.52Wh
    and full charge capacity is 48.68.
    the battery info:
    cycle count is 18
    Bar-Code number 1ZKFD27S1RF
    SerialNumber 1896
    First used date 2012-09
    FRU 45N1001
    Firmware 0003-0080-0100-0165

  • Conference Call Disconnects At Same Point Every Time

    Each time I make a conference call on my iPhone, it disconnects after no more than 15 minutes. It just hangs up. I'm not sure what happens. I don't have any other problems with it. Is anyone else having this problem when making a conference call?

    My husband has been experiencing the same problem. I wonder if there is a standard time-out because it always seems to be after 15 minutes.

Maybe you are looking for