MCU and Gateway
Hi all.
I have a Videoconferencing system with a 3515 MCU and a 3527 Gateway. The issue is that i cannot make conferences from H320 endpoints to MCU services through the gateway.
I am able to make point to point conferences betwteen h320 and h323 endpoints but not multiconferences.
Can anyone help me?
If I understand your question properly, you are trying to invite an ISDN only connected endpoint by using the IP "invite" dialsting on an H.323 into a multipoint conference on the Polycom. If I'm misreading this, please correct. If this is the case, this is not possible to do. ISDN connected endpoints via a GW need to be dialed using the prefix and full e.164 dial string.
Similar Messages
-
RDS and Gateway issues: Cannot get remoteapps to run without opening port 3389 on firewall
I am testing the setup of a small RDweb server to host QuickBooks for some remote sales users (4 users). For the most part, I have everything installed on one virtual server (using 2012r2 "Quick Start" session host deployment with the additional
Licensing and Gateway server roles added to the same server).
Everything works excellent with one exception. External clients cannot launch published apps without having port 3389 open on the firewall, even with the gateway role installed and the 'Deployment Properties' set to use the gateway. They can properly connect
to the RDweb site and view the published apps. The only way it works is open the firewall port (at which time I can disable the gateway or leave it configured and it works either way). Internally, everything works accordingly. I have followed the steps outlined
on many sites and have combed though the forum here to no avail.
Error received (summarized but is a well documented error):
remote desktop can't connect to the remote computer: 1- Your user account is not listed (it actually is) or 2- You might have specified the remote computer in NetBios format . . etc.
This is an existing SBS 2011 environment with additional virtual servers setup to host QuickBooks as outlined below:
Current setup:
Used Quick Start to install Remote Desktop Services in hosted sessions mode
Installed the additional roles for Licensing and Gateway server on same server
Configured wild card public certificates on all four services (Connection Broker(2), Web Access and Gateway)
Configured internal DNS to properly lookup our external FQDN of this server (ex. quickbooks.contoso.com points to quickbooks.contoso.local
One thing I noticed (just now) when I launch a published app and the firewall has port 3389 closed, a dialog box pops up directly after launching the app that warns about running a RemoteApp program and mentions the Remote Computer and the Gateway Server
as both the same (which it is); however, I would have assumed one would have listed the internal server's name while, instead, both are listed as the external FQDN. Either way, internal DNS should still allow it to properly route . . no? I don't know . . I'm
sure I am just missing something in a routing configurations somewhere. The gateway service is not properly looking up the RDweb service and then seeming not routing the encapsulated RDP session through HTTPS. . .. is my guess . .
I was reading about the "set published name" commandlet; however, I am not experiencing a certificate name mismatch; however, the certificate name does show up as *.contoso.com versus the actual name. I may just be grasping as straws now . . :)Ok, while I was in the server and looking over the BPA scans: "The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name." This may be due to it showing up as *.companyname.com
versus quickbooks.companyname.com. Anyhow. .. on to the list of actions above:
Changed RD RAP from "Select Active Directory" group to "Allow any network resource" and tested with port 3389 closed on firewall:
Worked. Initially it did not as I had used a custom shortcut created from earlier; however, after logging into the RDweb site again, the application loaded fine now (after the RD RAP change)
No error message appeared; however, I did notice that for a split second, the word Error did appear in the browser's tab title, but only very shortly. The app launch does take a bit longer too now (about 10-15 seconds, up from about 4 seconds with the port
open). This, I could care less about so long as we are properly forwarding the traffic through the gateway.
As for log entries, I had spend quite a bit of time in there and only had minor issues with loading user profile setting taking too long and policy settings preventing the redirection of USB devices. Looking again, no issues still. Just a bunch of informational
entries where I would connect before (and disconnect) but only with the port on the firewall open; otherwise, there was not an entry corrolating to when I would receive an error before. Now though, I am connecting after the RD RAP change and logs are showing
connections even with the port closed. These are in "operational", the "admin" log only shows the update to the RD RAP configuration.
Yes, the LAN's DNS server does relay the lookup information for my public FQDN as the local LAN address. No need for a local host record.
I have now added a new rule in our firewall to allow and forward UDP port 3391 traffic to the internal server hosting remote services
Thank you very much for your assistance on this matter. The RD RAP rule was default built during the creation of this services. Why is the resource not cross-referencing AD security groups? I could have sworn I created a group for that . . . -
Dhcp: default gateway not added if ip and gateway in different subnets
Hi! Help needed with Arch's DHCP client. (dhcpcd)
Assume that ISP leased ip 78.37.180.62/24 and gateway 78.37.0.1
On my home router when you plug cable, routing table is like this:
Destination Gateway Genmask Flags Metric Ref Use Iface
78.37.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
78.37.180.0 0.0.0.0 255.255.255.0 U 202 0 0 eth0
0.0.0.0 78.37.0.1 0.0.0.0 UG 202 0 0 eth0
But on Arch it's much tinyer:
78.37.180.0 * 255.255.255.0 U 202 0 0 eth0
And no internet for me.
I've read that before adding a gateway you need to add a route to that gateway or you get an error: SIOCADDRT: No such process.
I believe this very error is what Arch's dhcp cliet gets when it tries to add the gateway.
Funny thing is if you manually add the route to the gateway, the gateway is auto-added in 5-10 sec.
# route add 78.37.0.1/32 dev eth0
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
78.37.0.1 * 255.255.255.255 UH 0 0 0 eth0
78.37.180.0 * 255.255.255.0 U 202 0 0 eth0
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
78.37.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
78.37.180.0 0.0.0.0 255.255.255.0 U 202 0 0 eth0
0.0.0.0 78.37.0.1 0.0.0.0 UG 202 0 0 eth0
Where to dig? Are the routes added by some script that can be modified?
Last edited by leniviy (2009-05-23 20:22:52)also, until correct route is added, someone keeps logging to daemon.log:
May 23 21:27:22 IL dhcpcd: eth0: add_route: No such process
May 23 22:33:05 IL dhcpcd: eth0: send_raw_packet: Network is down
May 23 22:34:54 IL dhcpcd: eth0: add_route: No such process
May 23 22:35:09 IL dhcpcd: eth0: add_route: No such process
May 23 22:35:24 IL dhcpcd: eth0: add_route: No such process
May 23 22:35:39 IL dhcpcd: eth0: add_route: No such process
May 23 22:35:54 IL dhcpcd: eth0: add_route: No such process
May 23 22:36:09 IL dhcpcd: eth0: add_route: No such process
May 23 22:36:24 IL dhcpcd: eth0: add_route: No such process -
Gateway Host and Gateway Service
Hi,
How do I find the gateway host and gateway service when I am creating a RFC Destination. I am new R3 so please be as detailed as possibleHi, well i have a similar problem. I am trying to run the Template Installer after installing NetWeaver2004s.
During the PIPostInstallProcess i am receiving following error while trying to import Execute SWF_XI_BPM_AUTO_CUSTOMIZE:
Element 'SWF_XI_BPM_AUTO_CUSTOMIZE':Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=sapru02 SYSNR=00 GWHOST=sapru02 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Mon May 14 14:54:27 2007
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic_mt.c
LINE 10713
COUNTER 1
Element 'SAPDEMO.DX1.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!SWF_XI_BPM_AUTO_CUSTOMIZE!AbapConfigurationWriter.FAILED!
Well the Host and the Gateway is right, i checked in SMGW. So what might be my problem?!
thx in advance, Jens -
Can we have oracle database and gateway for SLQServer on same machine
Can we install oracle database and Gateway for sQLServer on same machine>?
If yes, How does the listener files in gateway home (EG: C:\product\11.2.0\NETWORK\ADMIN) and oracle home (EG: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN) look like?
Where will we give dg4msql details in tnsnames and listner files?Here is the output of starting both the listeners. This is output when i appended listener1 settings in Oracle_home listener.ora file.
C:\Users\Administrator>lsnrctl start listener
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 03-DIC-2012 04:46
:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Avvio di tnslsnr: attendere...
TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Il file dei parametri di sistema Þ C:\app\Administrator\product\11.2.0\dbhome_1\
network\admin\listener.ora
Messaggi di log registrati in C:\app\Administrator\diag\tnslsnr\WIN-77CAQGHJSA2\
listener\alert\log.xml
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521
STATO del LISTENER
Alias listener
Versione TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Produ
ction
Data di inizio 03-DIC-2012 04:46:20
Tempo di attivitÓ 0 giorni 0 ore 0 min. 5 sec.
Livello trace off
Sicurezza ON: Local OS Authentication
SNMP OFF
File di parametri listenerC:\app\Administrator\product\11.2.0\dbhome_1\network\a
dmin\listener.ora
File di log listener C:\app\Administrator\diag\tnslsnr\WIN-77CAQGHJSA2\list
ener\alert\log.xml
Summary table degli endpoint di ascolto...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Summary table dei servizi...
Il servizio "test" ha 1 istanze.
L'istanza "test", stato UNKNOWN, ha 1 handler per questo servizio...
Il comando Þ stato eseguito
C:\Users\Administrator>lsnrctl start listener1
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 03-DIC-2012 04:46
:23
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Avvio di tnslsnr: attendere...
TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Il file dei parametri di sistema Þ C:\app\Administrator\product\11.2.0\dbhome_1\
network\admin\listener.ora
Messaggi di log registrati in D:\product\11.2.0\tg_2\diag\tnslsnr\WIN-77CAQGHJSA
2\listener1\alert\log.xml
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522
STATO del LISTENER
Alias listener1
Versione TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Produ
ction
Data di inizio 03-DIC-2012 04:46:29
Tempo di attivitÓ 0 giorni 0 ore 0 min. 5 sec.
Livello trace off
Sicurezza ON: Local OS Authentication
SNMP OFF
File di parametri listenerC:\app\Administrator\product\11.2.0\dbhome_1\network\a
dmin\listener.ora
File di log listener D:\product\11.2.0\tg_2\diag\tnslsnr\WIN-77CAQGHJSA2\li
stener1\alert\log.xml
Summary table degli endpoint di ascolto...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
Summary table dei servizi...
Il servizio "dg4msql" ha 1 istanze.
L'istanza "dg4msql", stato UNKNOWN, ha 1 handler per questo servizio...
Il comando Þ stato eseguito
C:\Users\Administrator>sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Lun Dic 3 04:46:34 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> conn system/Manager1@star
Connesso.
SQL> create public database link test2 connect to "sa" identified by "pwd"
using 'dg4msql';
Creato database link.
SQL> select count(*) from prefer@test2;
select count(*) from prefer@test2
ERRORE alla riga 1:
ORA-28545: errore diagnosticato da Net8 durante la connessione a un agente
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: precedente 2 lines da TEST2
Output of tnsping from oracle_home
C:\Users\Administrator>tnsping dg4msql
TNS Ping Utility for 64-bit Windows: Version 11.2.0.2.0 - Production on 03-DIC-2
012 05:01:28
Copyright (c) 1997, 2010, Oracle. All rights reserved.
File di parametri utilizzati:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
╚ stato utilizzato l'adattatore TNSNAMES per risolvere l'alias
Tentativo di contattare (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522)) (CONNECT_DATA = (SERVICE_NAME = dg4msql)) (HS=OK))
OK (0 msec)
tnsnames.ora file at D:\product\11.2.0\tg_2\NETWORK\ADMIN
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA = (SERVICE_NAME = dg4msql))
(HS=OK)
C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN
LISTENER_test=
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA = (SERVICE_NAME = dg4msql))
(HS=OK)
test=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = test)
) -
Gateway host and gateway service query
Hi Friends,
Happy new year all.
Im working on <b>sap-siebel</b> integration,in rfc(sm59) destinations -TCP/IP connections ....
I need to give Program and gateway options in sap system.plz let me know where can i find the gateway host and program for this integration.
All inputs will get reward points.
Regards,
Lavanya.Hi Lavanya,
If you are planning to use the TCP/IP destination on the SAP system in Register mode, then a siebel application has to register at the sap gateway using the <b>Program ID</b> given in the TCP/IP destination on the SAP system.
In the TCP/IP destination the gateway options should contain the gateway host of the sap system and the gateway service. usually the gateway host is the message server itself and the gateway service is "sapgwXX", where XX is the <system_number>.
Thanks,
Renjith. -
How to find the Values of SAP Gateway Server Host and Gateway Service Valu
Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
PhanikumarHello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano. -
Weird DNS and GATEWAY IP Address
iPad 1 and iPad 2, join wireless network, pulls 192.168.1.199 for a DNS and GATEWAY address, force a STATIC (manual) of 192.168.1.1 works, revert back to DHCP, keeps 192.168.1.1 until offsite and attempt to reconnect.
Tried Renew Lease, still pulls 192.168.1.199, have to always force 1.1 and revert back to DHCP afterwards.
Router has static IP (Cablevision), 255.255.255.248 Subnet with OPEN-DNS (208.67.222.222 and 208.67.220.220) Even if I use Cablevision, Google, Verizon DNS, always pulls a 1.199 IP for GW and DNS.
Tried 3 different routers, still weird.
Any ideas?I�ve recently installed Solaris v10 X86 and have two
questions. The system is a Dell E521 with 4GB RAM
and 1GB SysKonnect NIC, and internet is provided via
a cable modem, that�s plugged into a Netgear router,
and the Solaris 10 box is plugged into the Netgear
router via a CAT5 ethernet cable.
1. I can connect to my router login page using the
following URL:
http://192.168.1.1/start.htm and I can also connect
to various web pages such as yahoo, if I first "ping
yahoo.com" (on another machine that�s internet
enabled) and then plug the web site�s ip address into
the Solaris/Mozilla browser. So it appears that I
haven�t been successful at pointing the Solaris x86
at a DNS server to resolve the DNS name.You can either copy nsswitch.dns to nsswitch.conf, or you can modify nsswitch.conf so that 'dns' is used for hostname lookups.
2. I've purchased a commercially available software
package and it requires a static ip address for this
Solaris x86 server. If the ip address changes, it�ll
stop working by design and require that I reacquire
the license file. When connecting through this
Netgear router, how do I lock this Solaris v10 x86
server into a specific ip address? (the ip address
floats presently when cycling my PC�s on/off)
presently, and assume the Solaris box will too,
usually through an ip range of 192.168.1.<1 through
5>One method is setting the router so that the server's MAC address is tied to a specific IP.
Otherwise you can edit /etc/hostname.<interface> and place a static address there, forgoing DHCP services from the router. You may want the address to appear outside the router's DHCP range.
Darren -
Gateway hostname and gateway service name for XI
Hi,
Where can i find the Gateway hostname and gateway service name for XI Integration server. I need this info to input for creating RFC for SAPSLDAPI.
Thanks in advance. SriSri,
You can find this info from t-code SMGW
Choose menu Goto->Parameters->Display and search for entries
gateway hostname and gateway service (usually sapgw00)
Reward if helpfull
Vijay Kothapalli -
What is the relation between transports and gateway? We had an issue with STMS today. The import queue wont show up and the process would hang forever. redistributing TMS also didnt work. but when we killed the gateway process(unix level) on some systems it worked.
I dont understand the relation though.
Can someone help.
Thanks
CyrusHi Cyrus,
A transport domain consists of all the SAP systems that
have certain same system configuration settings.
Now there exists a reference configuration on the
transport domain controller, which is one SAP system with
all the other systems in the domain taking copies of this
reference configuration. Each time change is made in this
reference configuration, it has to be distributed to all
the other SAP systems in the domain, in the form of transports.
A SAP Gateway acts as a bridge between the SAP system and
external program/system, useful for data communication.
Hence we can conclude that for distribution of the
reference configuration from the controller to other SAP
systems, we need a SAP Gateway for communicating between
the systems. That should be the relation between gateway and transport.
For more info:
http://help.sap.com/saphelp_nw04s/helpdata/en/14/94fc3f8fc2c542e10000000a1550b0/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bb/9f13dc4b9b11d189750000e8322d00/frameset.htm
Hope it helps..
Regards
Srikishan -
Where ti find gateway host and gateway service of PO system?
Hi,
I am using a single-stack PO 7.4 system? I want to know how can I know the gateway host and gateway service of the system? basis team was not able to help so choosing this forum for this.
Regards,
VikasHi Vikas,
you can find the default setting in below blogs or documents
Sending and receiving IDOCs using a single stack SAP PO system
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5050119d-9c47-3110-eab0-d90ebd211e69?QuickLink=index&…
Configuration of inboundRA in the Java IDoc_AAE Adapter - Process Integration - SCN Wiki
Connect multiple SAP ECC clients from Java IDOC Sender Adapter by Resource Adapter Cloning
regards,
Harish -
Which Ports do MCU and Call Manager use for Video?
Hi, Does anyone know which ports the MCU and call Manager Use when using the 3511 MCU box with Call Manager 4.1.3. I am looking to open the appropriate ports on the firewall.
Regards
DominicDominic,
If your MCU ports are Callmanger controlled, they will use Skinny (SCCP) to communicate on TCP port 2000. Please see the following link.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801a62b9.shtml
Hope this helps. If so, please rate the post.
Brandon -
Cisco VCS/Codian MCU and Lync 2013 integration
Hi,
I would like to know if Lync 2013 is supported to work with:
- Cisco Tandberg VCS version x6.1
- Cisco Codian 4.1 (comp. 6.16)
Is it necessary to update both devices to be supported/homologated/qualified?
ThanksHi, Kent ... From what I'm seeing so far the challenges of integrating Cisco/Tandberg equipment and Lync 2013 are the same as what you may have already encountered with Lync 2010. Since the Cisco endpoints and MCU cannot register directly to Lync 2010
or 2013, you will need to leverage the VCS systems as your SIP gateway between them and Lync clients. In Lync 2010 there were limitations as to the interoperability of the H.263/264 codec used by Cisco gear and the RTV codec that Lync was restricted
to, and we often experienced frozen video feeds from Lync clients or an inability to connect to individual Cisco endpoints or conferences hosted by the Codian MCU. Even though Lync 2013 will use H.264 as a codec for the video stream, I anticipate there
will still be challenges interconnecting through the VCS as well as providing content between Lync and Cisco endpoints. However, I expect an increase in the video quality since Lync 2013 supports higher resolutions and also uses a non-proprietary codec.
I expect content to still be unreliable for the Lync participant, even when using a Codian MCU.
You will still need to setup your VCS with a separate Neighbor zone for the Lync 2013 server just as you did for Lync 2010. I wouldn't hold my breath for Cisco to update the VCS software to accomodate the specific needs of Lync 2013, but at least the
VCS will get the correct video codec and connect your call. I don't know about you but I had to put my Cisco units and MCU into a separate SIP domain from the Lync pool, and then create a static route for the Cisco SIP domain on the Lync 2010 front-end
server. I expect to do the same in Lync 2013.
Ideally, Microsoft and Cisco would agree that SIP is SIP, and whether an endpoint registers with VCS, UCM or Lync shouldn't be relevant. Alas, it'll be a long, long time before that is true, certainly not as long as Microsoft and Polycom have
such a tight bond. I plan on implementing Lync 2013 in the next few months and will gladly post any progress here. At this point my plan is to simply mirror the static route and configuration I have with Lync 2010. My VCS and Codian units
are running software versions just a little ahead of yours and work fine.
Good luck! -
Planning to upgrade our 3540 MCU and 3521 BRI GW
When I run the respective upgrade utilities and click 'customise' I get a list of software that can be upgraded on the units but not all of the available components are ticked. For example the 3521 BRI gateway allows me to upgrade the 'Gateway Application', 'Gateway Wakeup', 'Gateway WEB interface', 'Gateway IVR recordings' and 'ISDN BRI Driver'. All of them are ticked by default except for the last one the ISDN BRI driver. Similar thing applies to the 350 MCU but in that case 3 things are unticked. I cannot find any documentation or help files on what all these components are and which to install and I am wondering whether I should tick everything or go with the defaults only. Does anyone know what is the best course of action or what ones you have chosen? I'm going to go with the default settings if no-one knows.
Thanks
MattMatt, Here at the University of Wyoming we have had problems upgrading the 3540 series.
First, we just used the default settings. But most times the unit would lose its config and you would have to reload by unchecking everything except the mcuconfig box. But someone would have to be at the unit to setup the basic network settings again on the serial port.
The other problem was you cannot skip revisions. If you are on older code you have to upgrade in sequence. We could never get much help from TAC/Radvision except for blade replacements.
We finally upgraded to the 3545 series and it has been rock solid.
Never had any problems with the gateway upgrades. -
Dear Flexer-users,
I have uploaded my first flex builder project (version 4.6, testversion cause I'm a newbie) that communicates with an MYSQL database. The project is called MeinMuc and is just to checkout some basic database functions like add, update, delete etc.
1. Offline:
When I'm offline everything works fine. The project and the ZendFramework folder are both located in C:\wamp\www\
2. Online:
When I upload the project to my provider I keep the structure but it wont work.
Here is the link to MeinMuc.html:
http://kd7854_6480.webspace23.do.de/MeinMuc-debug/MeinMuc.html
And here is the link to my issue-file, amf_config.ini:
http://kd7854_6480.webspace23.do.de/MeinMuc-debug/amf_config.ini
When I open gateway.php (http://kd7854_6480.webspace23.do.de/MeinMuc-debug/gateway.php) I get some issues saying that the zend dir can not be found. But the path in amf_config.ini should be fine. I checked it by opening http://kd7854_6480.webspace23.do.de/ZendFramework/INSTALL.txt and this works.
Does anyone knows what I'm doing wrong? I tried and googled a lot already but without any success so far.
Thanks a lot and best regards, AndreasHello Rupesh,
You need to specify full url like this "http://localhost:90/" and need to start server before validating.
This check may be missed by you.
Thanks,
Vikram
Maybe you are looking for
-
File size of imovie hd - HUGE; why?
I loaded in about 40 minutes of HD video captured on the cannon hv20 and then cut most of it out, so I now have a movie of about 4 minutes. I have emptied the recycle bin (both in imovie and the general computer), but the imovie file is still about 3
-
No write permissions in my home directory
Hi, I'm having a weird issue with my Mac. I am unable to create new files or directories in my home directory. For instance: Bergy Bit> cd ~ Bergy Bit> cp temp.txt temp1.txt cp: temp1.txt: Permission denied I can override this with sudo, but it's a m
-
Failed to load numeric attribute
Good morning. First excuse me for my english... In our database we need a numeric attribute, such Price List. When I load data in my ASO database with Integration Services (from a SQL Server 2005 source) I see the following message: "Failed to add at
-
Unable to replace Harddisk for Macbook
Hi I am trying to replace my macbook hardisk. here are the steps I followed, but no success 1. reomved battery 2. removed L shaped RAM door 3. pulled harddisk 4. remove the old harddisk from the base 5. plug new harddisk on the base, and push into th
-
Oldest time machine backups are inaccessible
Hi everyone, I'm running 10.6.1 and have had no problems with Time Machine until recently. My Time Machine has an Oldest Backup of July 28, 2009. It's Latest Backup was done today just an hour before this posting. My problem is, I can access all of m