MCU Send assignment is not reflected in automatic channel management

I have discovered a problem where the MCU Send assignment, is not reflected in automatic channel management.
Can someone try this for me please, with a session that has for 'Automatic Management of Channel strips' enabled...
Press and hold 'Send' -- then push v-pot 7 for the function 'Send, destination and level' for the v-pots.
If you assign an Aux that has not been used, it will not be created automatically.
Cheers,
Matt

Automatic Shared Memory Management Enabled
Total SGA Size (MB) 3840
SGA Component Current Allocation (MB)Check the value of your MEMORY_MAX_TARGET and MEMORY_TARGET setting in 11g these two parameter enable auto shared memory management.
the values of SGA_TARGET and PGA_AGGREGATE_TARGET act as minimum values for the sizes of the SGA or instance PGA if set to non-zero.
SHOW PARAMETER TARGET
http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/memory003.htm#BGBJAHEJ

Similar Messages

Updating Flash Player Does Not Reflect In Add-Ons Manager or Plug-In Check

The add-ons Manager shows I have Flashplayer version 11.3.300.265. The Plug-ins Check shows there is an update, and I downloaded and installed Flash Player version 11.3.300.268. Six times! Each time, the installation shows as successful on the Adobe site, but FF14 does not reflect the new version, and the Plug-in check continues to insist that the version is out of date.
I had no problems whatsoever updating to the latest Flashplayer version in IE (8). But FF is once again giving me trouble with this.
In addition, the add-ons manager shows a version of Flash 9.0.45.0, last updated Feb 20, 2007. There's a big red warning that it's out of date. This is in addition to Shockwave Flash (the correct one) and Shockwave for Director (which is current). It's been like this for awhile, and I disabled the antique version of Flash and it does not affect FF or Flashplayer performance.
I tried deleting my plug-ins database, but I just get all the same info when it is rebuilt. Any suggestions or solutions would be appreciated.

Such old version are usually located in the plugins folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\).
You can enable the plugin and verify the path on the about:plugins page.
You can set the plugin.expose_full_path pref to true on the about:config page to see the full path of plugins on the about:plugins page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
*http://kb.mozillazine.org/about:plugins
*http://kb.mozillazine.org/about:config
It is best not to leave that pref set to true as it exposes that full path to web servers, so reset that pref to false after you are done with the about:plugins page.
See "Manually uninstalling a plugin":
*https://support.mozilla.org/kb/Troubleshooting+plugins

TAX CODE not reflecting in automatic purchase order

Dear MM/SD Gurus,
We are in process of Transportation. Flow of business scenario is mentioned below.
Sales order-> Delivery->Shipment->Shipment cost.
After creation of shipment cost document, as configuration system is generating automatic purchase order for
freight vendor and also post service entry sheet.
But in purchase order genereted in back ground , there is no tax code in invoice tab though we had maintained
master info record for Vendor,Material group,Plant,Purchasing org level.
PO is genereted in D (Item Category) and K (Account assignment category) withouth any master data.
So we maintained Info record on base of material group.
Thanks & Regards
Rajan

Hi
check your Po and see info record number is there or not and check your tax code in that info record again
Regards
kailas Ugale

SAP SD Material Determination not reflected in assigned sales document type

Hi Experts,
I have implemented customized material determination, with requirement to change the UoM of the entered material, from GJ to MJ. I have assigned the procedure to 3 document types:
1. sales order type
2. credit memo request
3. debit memo request
However, this setup is only reflected in the 1st sales document assigned with the procedure. It is not reflected in the credit or debit memo request.
I have turned on the material determination analysis in sales order. Per my checking during credit memo request creation, the analysis indicated that the condition is found successfully. But the UoM did not change in the document.
Please assist.
Thank you.
HJMY
Edited by: HJMY on Sep 20, 2011 1:24 PM

Hi Ravi,
Thx for your reply.
But I am creating credit/debit memo request without reference to billing.
When I create credit/debit memo request, the material determination is triggered.
Per my test today for credit memo request, I found that the material determination is triggered.
However, the substition UoM is not reflected in the credit memo request document.
The result is reflected only in sales order.
Please help.
Edited by: HJMY on Sep 21, 2011 3:28 AM

BPM 11g Role Assignment not Reflected on BPM Workspace

Hi,
I'm having trouble with role maping in JDeveloper for my BPM 11g project, where the server groups mapped against a particular applcation role is not reflected in BPM workspace.
I'm mapping application roles with server groups in the Organization section of my BPM project in JDeveloper, but when I open the Administration section of the BPM workspace, I see that the appropriate section is blank where there should be the server group assigned.
I have confirmed that the server groups are in place, and have users associated with them. I even tried ti with the Administrators groups of WebLogic, with the same results.
However, when I deployed this same project on an Oracle On Demand server, the JDeveloper role maapping was successfully deployed along with my process. Could anyone please provide some insight in this matter?
I'm working on JDeveloper and SOA 11.1.1.5
Thanks,
Debojit

HI,
In 11g you have the concept of Global Links. You can refer to http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_ext_apps.htm#BACCACGI fro example of how this can be acheived
I think there are also some samples on java.net for Oracle BPM Suite however this appears to be down at the time of posting so I can not validate this.
Hope this helps
Regards Dave

Send email when ownership is assigned' is not working

Send email when ownership is assigned'
is not working
even though this option is disabled designer workflow task creation sends an email to the user when task is assigned to the user.
We have october CU updates 2013.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
Per my knowledge, if the task is created from a workflow, then you may use the task actions in the workflow.
And some task actions will send an email to the user who the task is assigned to, so the email is sent from the workflow and it is not sent from the option “Send email when ownership is assigned”.
If you are using 2013 workflow, the send email action cannot be prevented from the workflow.
If you are using 2010 workflow, you can go into the task process to delete the Send an Email action.
https://support.office.com/en-nz/article/Use-the-task-process-editor-for-approval-workflows-8680b4a4-36b1-441c-b070-e515976078aa#__toc264538566
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

DataGrid not reflecting changes after INSERT into Table. Delete from Table does.

Wow, it's been a while.
Hope you guys can help.
This is my DataGrid:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
<DataGrid.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="BorderThickness" Value="0"/>
</Style>
</DataGrid.CellStyle>
<DataGrid.Columns>
<DataGridTextColumn x:Name="NodeColumn" Binding="{Binding node}" Header="VS Number" Width="*"/>
<DataGridTextColumn x:Name="SerialColumn" Binding="{Binding serial}" Header="Serial Number" Width="*"/>
<DataGridTextColumn x:Name="NameColumn" Binding="{Binding name}" Header="Asset Name" Width="*"/>
<DataGridTextColumn x:Name="TypeColumn" Binding="{Binding type}" Header="Asset Type" Width="*"/>
<DataGridTextColumn x:Name="_dateColumn" Binding="{Binding date}" Header="Date Allocated" Width="*"/>
<DataGridTextColumn x:Name="PoColumn" Binding="{Binding po}" Header="Purchase Order" Width="*"/>
</DataGrid.Columns>
</DataGrid>
This is where I add a new Row to the Table:
Private Sub Button_Click_1(sender As Object, e As RoutedEventArgs)
Dim cbblocation As ComboBox = Me.FindName("LocationComboBox")
Dim row As DataRowView = DirectCast(cbblocation.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
Dim cbbtype As ComboBox = Me.FindName("comboBoxType")
Dim cbbtext2 As String = cbbtype.Text
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.AddNewAsset(cbbtext, txbSerial.Text, txbName.Text, cbbtext2, Date.Today, txbPO.Text)
node = cbbtext
Dim mp As New MainPage
mp.RefreshGrid(node)
Me.Close()
End Sub
The RefreshGrid method:
Public Sub RefreshGrid(node As String)
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.FillByNode(RETAILISOAMDDataSet.tableAssets, node)
Dim TableAssetsViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("TableAssetsViewSource"), System.Windows.Data.CollectionViewSource)
Dim be As BindingExpression = BindingOperations.GetBindingExpression(TableAssetsViewSource, CollectionViewSource.SourceProperty)
be.UpdateTarget()
End Sub
And this is what I use to delete a row from the table (and without doing anything special, the DataGrid auto-updates with the changes):
Private Sub Button_Click_4(sender As Object, e As RoutedEventArgs)
If TableAssetsDataGrid.SelectedIndex = -1 Then
MsgBox("You have selected nothing to Delete!", MsgBoxStyle.OkOnly, "Nothing Selected")
Else
Dim dgv As DataGridTextColumn = Me.FindName("NodeColumn")
Dim row As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText As String = row.Item("node")
Dim dgv2 As DataGridTextColumn = Me.FindName("SerialColumn")
Dim row2 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText2 As String = row.Item("serial")
Dim dgv3 As DataGridTextColumn = Me.FindName("NameColumn")
Dim row3 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText3 As String = row.Item("name")
Dim dgv4 As DataGridTextColumn = Me.FindName("TypeColumn")
Dim row4 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText4 As String = row.Item("type")
Dim dgv5 As DataGridTextColumn = Me.FindName("_dateColumn")
Dim row5 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText5 As String = row.Item("date")
Dim dgv6 As DataGridTextColumn = Me.FindName("POColumn")
Dim row6 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText6 As String = row.Item("po")
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.RemoveAsset(dgvText, dgvText2, dgvText3, dgvText4, dgvText5, dgvText6)
Dim cbb As ComboBox = Me.FindName("cbbLocation")
Dim row7 As DataRowView = DirectCast(cbb.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
RefreshGrid(cbbtext)
End If
End Sub
--------- End of Edit
It is bound to a Dataset which gets it's data from a SQL Database.
Loading the Data and Filtering the data based on certain conditions work 100%. The problem I am having is as follows:
I have a form on the Page that takes input and inserts a row into the Database. When this happens, the DataGrid won't automatically reflect the changes (even if I recall the Fill Method of the Dataset). No matter what I do, I have to refresh the entire page
and THEN Fill the Dataset to see any changes.
This is what strikes me as odd...
When I do a delete row operation on the Database (Custom Method on the Dataset with conditions), and just Fill the Dataset again (without doing anything special), the row deletes and the changes is reflected IMMEDIATELY.
What am I doing wrong here? Why would Delete Row reflect the changes on the DataGrid but no Insert Row?
Thanks in Advance.
(P.S. I am very rusty with my developing skills, I haven't done this in YEARS)

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

File sender adapter is not working

Hello All,
We are facing a problems with file sender adapter. Communication channel is not picking the files from the directory, but the status in RWB for that channel is 'Functioning'. We are not sure whether the channel is locked or any other problewm with adapter. (In Alternate option, we have created copy of that channel and when it is activated, it picked the file )
Can anyone help us how to identify whether channel is locked and any other solutions in this case.
Regards,
Sreenvias.

Hi Srinivas,
The file adapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender file adapters as well. I would recommend to do a check in al sender file communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for file adapter ( with name $XIAFFileAdapter) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your file based interfaces. Hence i would suggest to use Timeout parameter avialable in file sender adapter which termiates FTP session as you defined, This should solve your issue permanently.
The FTP server do have thier own time out settings but if you don't defne any particulat time out in PI, the FTP server forcefully disconnects the FTP sessions which created locks in PI.
Hope this solves your issue.
PS: The same bahaviour would expected for all sender JDBC adapter as well

Paymnet document not reflecting in REGUH and REGUP table

Hi Expert,
I have run f110 and payment is made to respective vendor,but the payment document is only reflecting in PAYR table and not reflecting in REGUH and REGUP,tables
can anybody explain me reason for such kind of situattion
Thanks in advance
Regards
Pankaj

hi,
Please check the logic implemented for down payment. Basically, the check printing will have two categories 1. Payment against invoice 2. Down Payments.
In the first case we normally use F-58 transaction, when you process the transaction cheque will automatically get updated and tables PAYR, REGUH and REGUP will be updated.
In case of down payment we use F-48 and then assign the chequq manually - during this process tables PAYR will be updated but not REGUH and REGUP. Hence we need to go BSEG table.
Please check the logic implemented for down payment scenario for "Amount
regards,
santhosh kaparthi

Changes in .RDF not reflected in template

Hi,
I am wondering if anyone else has had this issue. I made a change for a function in my .RDF file and moved it to our reports directory. The change is not reflected in the BI Publisher output. Is there something else I need to do to get the template to pick up the change as well. The problem seems to be that the XML output does not change and seems to only be running the old file. Is there somewhere else I need to move the file to or does anything have to be bounced to make changes effective? Any help is greatly appreciated.

Hi Jason,
Check if there is a Load balancer in use...
If the address you give to users to access EBS (http://erp.company.com:8001/) looks different from the server you upload the files onto (e.g. server1.company.com), you have good reason to suspect may be a Load balancer in use. Load balancing in EBS context means e.g. that the work load is automatically balanced between two or more application servers. In this case you would need to upload the updated file to every server used (server1.company.com, server2.company.com, etc).
The load balancer gives assignments to the application servers according to some internal logic. You can query fnd_concurrent_requests to see which AS was assigned to carry out each request. If you have an obsolete version of the report on one AS, and new one on the other AS, whichever could be picked. Actually you may have the old one picked dozen times in a row. This could explain why the updates are not reflected when you run the concurrent program.
Best Regards, Matilda Smeds

E Recruitment -Candidate applied for job but not reflected candidate name

E Recruitment
Candidate applied for job but not reflected candidate name Recruiter Dashboard
Please any one suggests me what is problem?
Regards
Eshwar

Hello Sri,
the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
Kind Regards
Roman

Process order batch number not reflecting in corresponding inspection lot

Hi QM gurus,
I am working on inprocess inspection for production. I am creating process order during that time batch no is generated automatically by the system. Now process order is released during this time Inspection lot generated with inspection type 03. Now the problem is in the inspection lot, process order batch number is not reflecting. I have checked all the master data seetings. All seems to be fine. what could be the problem. any settings missed can anybody help me out.
Thanks
Vinameath

Hi Vinameath,
Go to the Master Recipe (C202) of this Process order/Material. Go to Recipe Header tab and click on the Quality Management Header button.
Now,go to the Partial Lot Assign field and maintain the value " 0 Partial Lots not supported " and save.
Then create a new process order and in all probabilities, the batch should appear on the in-process inspection lot.
Hope this helps you!
Regards,
Vinodh

Change in Quota at Exchange Server does not reflect in Outlook

I have changed the quota for a database on the exchange server from the default 2 GB to Unlimited and even restarted the information store service. The user is able to receive emails and send them as well. However in Outlook the message still persists that
users quota is 2 GB. Have restarted Outlook several times. Can anyone shed some light why this may be happenning. Also what is the default interval in which the information displayed by Outlok changes after a change at the exchange server?
Ron
Ron

Hi RonMen,
The change of mailbox quota will not reflect in outlook immediately, the update occur every 30 minutes by default.
Updates can be triggered either manually by the user or automatically.
The following user actions will request the server to update the properties :
1. Emptying Deleted Items
2. Emptying a Folder (via the button in the ribbon’s folder tab or right-click on folder)
3. Permanently deleting (shift-delete) an item
4. Closing the Archive / AutoArchive dialogs
There is a more detailed article for your reference:
Mailbox Quota in Outlook 2010 - general information and troubleshooting tips
http://blogs.technet.com/b/outlooking/archive/2013/09/19/mailbox-quota-in-outlook-2010-general-information-and-troubleshooting-tips.aspx
If you have any further questions, please let me know.
Best regards,
Eric

Free goods not reflecting in PO from Info Record

Hi,
My requirement is , when ever i order 100 qty from a vendor 10 qty should be delivered free of cost.
I am trying to maintain Info record for the same..
Now when i created PO for the same...I entered 100 qty..it is not reflecting 10 qty in another line in PO..
Where i am wrong?
Uts

HI,
Have maintained the values in
*Spro-Purchasing-Discount in kind-Define & assign discount in kind schema-Maintain free goods schema*
It will be available in standard SAP if not do the following configuration
Here
Usage -N
Application -M
create procedure NR0001
In control data
step-10
Cond Type-NR00
Then save.
Next
Define free good schema
Here assign ur schema grp of vendor
Then assign the procedure created previously (i-e) NR001 & THEN SAVE.
The above configuration is very important for the free goods scenario to work.
Then go to MM and in purchasing view and give the value 2.
Then in MBN1 create the condition record for the IR -0.
Then create the PO it will work definetly.
9884057038
murugan
Edited by: Murugan mgl on Jun 17, 2009 6:58 AM
Edited by: Murugan mgl on Jun 17, 2009 6:59 AM

UI Screen Configs not reflecting on the web

For doing screen configuration, when I click on the frame to configure, the system is picking up std key and not the custom key zpartman though zpartman key is there in the list. ( Note: Zpartman key is the one assigned to this role ). Therefore if I do config in zpartman key, it's not reflecting on the web. Please reply what could be the reason and the solution.
Thanks
TR

Hi TR
first access the standard and check the configuration info such as what is the configuration key , object and subobject .
Then access your custom configuration screen and check what it was looking for and what is it picked , change your custom configuration accordingly what it was looking for (by making changes to configuration key, object and sub object).
Check that you are accessing in the same client if not transport the request to other client using SCC1 transaction.
Thanks & Regards
Raj

MCU Send assignment is not reflected in automatic channel management

Similar Messages

Maybe you are looking for