MD04- data being udpated

Hello Gurus,
I change(planning delivery time) in material master data(MRP 2 view) using MM02 and run MRP using MD03.
Now i check MD04,data is being changed here in MD04.
same process(changing planning delivery time) is done using ME32l, now i do MD03 and when checkd in MD04 data is not being updated,
This shoudl not happen , because same case in working fine in another system.
please guide me how to chcek , b'coz i have checked for BADi's, user exits, validation and substituion to check for any custom code that is effecting this. But could not find anything else.
Please advice how to check on same.
Rgs,
Jayant.

Similar Messages

Dialog programming, data being washed out in TAB Control

Hi,
     i am working on dialog programming , in which i am using Table Control for user input (data is not coming from database table) . everything is going well till assignment of data to internal table but when
control goes to PBO by any means like pressing ENTER etc. then data being washed out.
PROCESS BEFORE OUTPUT.
MODULE TC_CONTROL.
LOOP AT it_data
         INTO wa_data
         WITH CONTROL tc_control
         CURSOR tc_control-current_line.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT IT_DATA.
    CHAIN.
      FIELD WA_DATA-FREPS_N.
      FIELD wa_data-TOEPS_N.
      FIELD wa_data-PRCH_A.
      FIELD wa_data-SRVC_AMT .
      FIELD wa_data-ACCNT_C.
      FIELD wa_data-AMT_D.
      FIELD wa_data-NARR_X.
      FIELD wa_data-CRPRD_N.
      MODULE tc_control_modify ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
*Abap program
MODULE TC_CONTROL OUTPUT.
DESCRIBE TABLE it_data LINES tc_control-lines.
ENDMODULE.                 " TC_CONTROL OUTPUT
CONTROLS: TC_CONTROL TYPE TABLEVIEW USING SCREEN 1000,
          TC_CONTROL1 TYPE TABLEVIEW USING SCREEN 1000.
DATA:     G_TC_CONTROLS_LINES LIKE SY-LOOPC,
          G_TC_CONTROLS_LINES1 LIKE SY-LOOPC.
*&      Module tc_control_get_lines OUTPUT
      text
MODULE tc_control_get_lines OUTPUT.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to wa_data.
ENDMODULE.                 " tc_control_get_lines OUTPUT
MODULE tc_control_modify INPUT.
move-corresponding wa_data to it_data.
MODIFY it_data
    FROM wa_data
    INDEX tc_control-current_line.
append it_data.
clear it_data.
ENDMODULE.                 " tc_control_modify INPUT
Please suggest me any clue.
Thanks in advance
vijay dwivedi

Hi ,
I have understood the problem.
In your ABAP code replace all the occurrrences of wa_data with the structurename.
Use the TABLES keyword to declare the structure .That structure will be same as
reference table of the table control .
Here the structure is SPFLI.
Check the bellow code , it will resolve the issue.
ABAP code - -
program zsdn.
tables spfli. " Declare the structure
data : it_data like table of spfli with header line,
*wa_data TYPE spfli, " commented
w_i type i.
*CONTROLS TC_CONTROL TYPE TABLEVIEW USING SCREEN 100.
controls: tc_control type tableview using screen 1000,
tc_control1 type tableview using screen 1000.
data: g_tc_controls_lines like sy-loopc,
g_tc_controls_lines1 like sy-loopc.
module tc_control output.
describe table it_data lines tc_control-lines.
endmodule. " TC_CONTROL OUTPUT
module tc_control_get_lines output.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to spfli.
endmodule. " tc_control_get_lines OUTPUT
module tc_control_modify input.
move-corresponding spfli to it_data.
modify it_data
from spfli
index tc_control-current_line.
append it_data.
clear it_data.
endmodule. " tc_control_modify INPUT
module status_0100 output.
set pf-status 'STAT'.
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'EXIT' or 'CANCEL'.
      leave to screen 0.
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*&      Module POPLATE_TABLE OUTPUT
*       text
module poplate_table output.
if it_data is initial.
    select * from spfli into table it_data.
endif.
endmodule.                 " POPLATE_TABLE OUTPUT
Screen code (Scr no 1000) - -
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE poplate_table.
MODULE tc_control.
LOOP AT it_data WITH CONTROL tc_control CURSOR w_i.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0100.
LOOP AT it_data.
    MODULE tc_control_modify ON CHAIN-REQUEST.
*    ENDCHAIN.
ENDLOOP.
Regards
Pinaki

Site Web Analytics - no usage data being generated

Hello all:
I have a SharePoint Foundation 2013 farm with 2 WFE - 1 Search Server and 1 DB server. Search Service Application has been configured and functioning properly. Usage and health Data Service Application has been created and started. Usage
data collection is enabled and the "Analytics Usage" check box is checked. Usage Data Import and Usage Data Processing timer jobs are scheduled and run successfully.
But, I still get the following error when I go to the Site Web Analytics "A web analytics report is not available for this site. Usage processing may be disabled on this server or the
usage data for this site has not been processed yet."
After doing some research, some folks have suggested the following which has to do with manually enabling the receivers via powershell - which I have done but still no report and same error.
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
Other Internet searches indicate that Web Analytics Reports is no longer available in SharePoint Foundation 2013:
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://sharepoint.stackexchange.com/questions/63099/where-is-the-web-analytics-service-in-sharepoint-2013
There is also a TechNet question which indicate that "Microsoft Support confirmed me there's a bug in SharePoint Foundation 2013 in the Database that's going to be fixed in the June or August CU"
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5372109c-8a6e-4d31-aa34-13b6cbde52cf/sharepoint-foundation-2013-web-analytics?forum=sharepointgeneral
But, there is no resolution if this bug has been addressed or not.
Therefore, I would really like to know what the deal is with this issue. At the moment, I do not see any usage data being generated on any of the SharePoint Foundation servers in the farm.
Please advise.
Thank you,
Rumi

Hi Rumi,
Find a same issue internaly which says that the links Site Web Analytics is no longer valid in SharePoint 2013 Foundation due to the changes in analytics service application architecture, so you may need the SharPoint enterprise edition for using
this feature.
Symptom
- Recently, we upgraded to SharePoint Foundation 2013 from WSS 3.0. In SharePoint Foundation 2013 sites, we see the option to click on Site Web Analytics reports but when we click on it, we get an error.
- Clicking on Site Web Analytics reports from Site Settings \ Site Actions produces the error: “A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data for this site has not been processed yet.”
- We have ensured we have logging enabled (multiple categories)
- Example Site: http://sharepoint2/sites/IT/Projects/SAP/_layouts/15/usageDetails.aspx
Cause
By Design
1) The links in Site Settings from a site collection are no longer valid in SharePoint 2013 (due to change in Analytics Service application architecture changes...part of Search Service now)
2) SharePoint Foundation 2013 does not support Usage Reporting Analytics
Resolution
o Purchase a license for SharePoint Server 2013 Enterprise, and build out a farm for it (the Foundation SKU cannot be upgraded in-place to Server).
o Once built up, you could copy your databases over and attach them to the Server farm and do your cutover.
o Going forward from there, you would be able to have access to the Usage reports.
Also as you have found that msdn blog with the explenation that it is not available in SPF 2013.
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://technet.microsoft.com/en-us/library/jj819267.aspx#bkmk_FeaturesOnPremise
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Daniel Yang
TechNet Community Support

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

HT1212 My ipod is disabled and the message requests to try again in 223004 minutes. I think it might have something to do with the date being set wrong before it went into disabled mode. Can you assist in enabling.

My ipod is disabled and the message requests to try again in 223004 minutes. I think it might have something to do with the date being set wrong before it went into disabled mode. Can you assist in enabling.

You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

How to delimited text file data being downloaded in Application server

Hi All,
How to delimited or having a tab between each fields in the data being downloaded to Application server. Please provide an example of code or how i should make changes to my below coding. Thanks.
eg. the out file in application server.
Field1#Field2#Field3
what I currently get was as below:-
Field1Field2Field3
My coding:
FORM download_outfile.
DATA : xfer(400).
IF rb_locl EQ 'X'.
    DESCRIBE TABLE itab LINES sy-tfill.
    IF sy-tfill GT 0.
      CALL FUNCTION 'WS_DOWNLOAD'
           EXPORTING
                filename            = p_file
                filetype            = 'DAT'
           TABLES
                data_tab            = itab
           EXCEPTIONS
                file_open_error     = 1
                file_write_error    = 2
                invalid_filesize    = 3
                invalid_table_width = 4
                invalid_type        = 5
                no_batch            = 6
                unknown_error       = 7
                OTHERS              = 8.
      IF sy-subrc EQ 0.
        WRITE : / 'download done.
      ELSE.
        WRITE : / '4)Error occured'.
      ENDIF.
    ENDIF.
ELSE.
    OPEN DATASET p_file FOR OUTPUT IN TEXT MODE.
    DATA : l_subrc LIKE sy-subrc.
    LOOP AT itab.
      MOVE itab TO xfer.
      TRANSFER xfer TO p_file.
      IF sy-subrc NE 0.
        l_subrc = sy-subrc.
      ENDIF.
    ENDLOOP.
    IF l_subrc EQ 0.
      WRITE :/ 'download done.
    ELSE.
      WRITE :/ 'error occurred.
    ENDIF.
    CLOSE DATASET p_file.
ENDIF.
ENDFORM

Hi,
Please check this sample codes.
OPEN DATASET P_DOWN FOR OUTPUT IN TEXT MODE. " P_DOWN is the file to download
IF SY-SUBRC = 0.
    CLEAR V_STRING.
*-- Download to the file
    LOOP AT IT_DOWN.
      CONCATENATE IT_DOWN-DISTTYPE
                  IT_DOWN-O_CITY
                  IT_DOWN-O_REGIO
                  IT_DOWN-O_PSTLZ
                  IT_DOWN-O_CTRY
                  IT_DOWN-D_CITY
                  IT_DOWN-D_REGIO
                  IT_DOWN-D_PSTLZ
                  IT_DOWN-D_CTRY
                  IT_DOWN-DISTANCE
             INTO V_STRING
             SEPARATED BY '09'.    " here 09 is the tab delimeter
      TRANSFER V_STRING TO P_DOWN.
      CLEAR V_STRING.
    ENDLOOP.
Regards,
Ferry Lianto

Error with calendar date being extracted : PSA - ODS - cubes correction

Hello to all,
I have an issue with incorrect calendar date being captured by BW.
Here is the analysis:
We have red request into the invoice cubes because of incorrect calendar date. It has been found that the process is done via PSA -> ODS -> Cubes
How will I do the correction? Kindly specify on whether or not to change the status of the red QM status in the cubes. Also with the data mart status of ODS and the request of ODS? What status(has to be changed)? what request has to be deleted? Thanks.

Hi,
What I did:
changed QM status to green of the Info Cubes
deleted the green status of requests in the Info Cubes
deleted the Data Mart status of ODS
deleted the request of ODS
edited manually the data into the PSA
started the update immediately
Then....
I will wait if the request will be updated in ODS?
Then
I will check if the delta job from ODS to cube will proceed right?
Please advise. Thanks.

How Secure is the data being backed up wirelessly?

What is the likelihood of someone being able to access data being wirelessly backed up to a TC?
Thanks.

It's pretty dependant on the kind of wireless encryption (if any) that you're using, the most secure being WPA2, with WPA/WPA2 a tiny bit less secure, and WEP about as secure as throwing copies of your house keys attached to photos of the expensive items in your house with your address on the back onto a crowded sidewalk. Okay, so it's not quite that insecure, but it's still pretty crappy.
Assuming you're using WPA2 or WPA/WPA2, your data should be getting pretty securely transmitted, though once it's on the Time Capsule it isn't encrypted, and if someone can physically access it, they can connect to it via Ethernet. If there's stuff you want to keep really secure, you should probably investigate encrypting it, possibly using encrypted disk images, but if your main worry is about it being intercepted in the air, providing you've got good wireless security and a decent password powering it, you should be fine.

Position of the days and dates being on the right side of the day in the week calendar.

I'm having a huge problem with the days and dates being on the right side of the day in the week calendar. Can I change that to the left upper side?
it makes the whole schedule off balance you see.

Thanks for stating that. So quickly. That *****. I also now see that more people have problems with this. Where can I complain?

MRP data MD04 Data Extractor (not MD05)

Hello,
Is there a SAP-delivered extractor for MD04 data? All the previous threads on this topic equate S194 extractor to MD04. The S194 based extractor delivers MD05 data not MD04. MD05 will generally equal MD04 if you do a fresh MRP run.

Hi,
2LIS_02_SCL does not deliver MD04 data. 2LIS_03_S194 is the closest with the limitation that it is only as good as the last MRP run.

Query data being picked from which data targets and dimension tables.

Hi Guys,
I need help from you people.
My query is "If we execute any query, i want to know from which data targets and from which dimension tables data being read in the run time", is there any program or any table to find this data.
thanks in advacne.
Regards
Prasad

Hi Prasad,
We will get Data target information in query level in information TAB.
If you want get dimension tables information also you need use technical business content(bwstatistics) Cubes and need to customize the required information. I think standard statisics cubes is not provide dimention tables information. Need to customize that.
Hope it will help for you.
Thanks,
Chandra

What is data being Skewed in a TABLE COLUMN in Oracle

Hi All,
I am going through numerous articles in Oracle to understand Cardinality,selectivity,histograms and Data being skewed to understand the characterstics of Oracle Optimizer.I have a hard time understanding the concept of data being skewed for a column in a table in Oracle.I need your help in understanding it.
Thanks,
Rav.

>
With out understanding the proper meaning of Skewness I assumed that a col data is skewed if the NDV of the col is high.
Your previoius statement raised this question now
Is there a corelation between number of distinct values in the column and the Skewness of a column?
>
See this Oracle white paper on Understanding Optimizer Statistics
http://www.oracle.com/technetwork/database/focus-areas/bi-datawarehousing/twp-optimizer-stats-concepts-110711-1354477.pdf
The section on Table and Column Statistics on page 2 has information that will clear this up
>
For example, if a table has 100 records, and the table access evaluates an equality predicate on a column that has 10 distinct values, then the Optimizer, assuming uniform data distribution, estimates the cardinality to be the number of rows in the table divided by the number of distinct values for the column or 100/10 = 10.
Histograms tell the Optimizer about the distribution of data within a column. By default (without a histogram), the Optimizer assumes a uniform distribution of rows across the distinct values in a column. As described above, the Optimizer calculates the cardinality for an equality predicate by dividing the total number of rows in the table by the number of distinct values in the column used in the equality predicate. If the data distribution in that column is not uniform (i.e., a data skew) then the cardinality estimate will be incorrect. In order to accurately reflect a non-uniform data distribution, a histogram is required on the column. The presence of a histogram changes the formula used by the Optimizer to estimate the cardinality, and allows it to generate a more accurate execution plan.
>
Did you notice the phrase 'if the data distribution in that column is not uniform (i.e. a data skew)'?
The NDV doesn't matter. It is the relative magnitude of each distinct value that determines the skew.
SB's example of gender, male or female, is not skewed if the number of 'males' is approximately equal to the number of 'females'.
But if the number of one of them, 'male' for example, is substantially larger than the number of the other then the data is skewed.
Assume a table has 1 million rows. If only one row is 'male' it makes sense to use an index to find it. But it wouldn't make sense to use that index if you were looking for 'female' since all rows but one are 'female'.
But because the NDV is two and there are 1 million rows then without a histogram Oracle would assume a uniform distribution and the query 'WHERE GENDER = 'male' would use a full table scan instead of the index.

Get MD04 Data in BW

Hi everybody,
I try to get the MD04 Data in BW.
I found this documentation (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e05de889-0b30-2d10-4f9c-c4c2db5052ec?QuickLink=index&…) and it is really helpful.
The problem is that the load takes a long time (around 3h) and it might be a problem for a daily extraction.
So I am looking for a way to reduce significantly this load.
Is there a way to make your datasource delta enabled ? Or a Full Load with selection of dates ? Or another solution ?
Thank you very much for your help.
Regards,
Nicolas

open the API (MD_STOCK_REQUIREMENTS_LIST_API) in SE37... there are plenty of input variables
check SAP Market Place for possible performance issues of this API

Hi, I have a new laptop and would like to syncronise my iphone with iTunes (which I have installed again). But my old laptop has died so I could not transfer any media files, etc. Can I simply connect my iPhone to the laptop without any data being lost?

Hi, I have a new laptop and would like to syncronise my iphone with iTunes (which I have installed again). But my old laptop has died so I could not transfer any media files, etc. Can I simply connect my iPhone to the laptop without any data being lost?
Many thanks in advance!

you have a new phone and a new comp and you want to restore to your old data ?!
I can't think of anything but icloud, and what was purchased via itunes

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Hi, do you mean a real Dial-up Modem as in the old days?
As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
http://www.zoomtel.com/products/dial_up_external_usb.html
Or is the Modem on the other end Cable/DSL/FiberOptic?

MD04- data being udpated

Similar Messages

Maybe you are looking for