MD04 for PR
When my user goes to MD04 for material A, they see a list with DepReq, POitem, PurRqs
The DepReq is auto generated from our forecast / mrp upload.
So when Planner has convert a planned order to firm planned order, user will need to check whether there is any shortage of Raw material. But based on their current view, they cannot different whether which DepReq is from which Firm Planned Order
Any solutions?
Hi Shantha,
From the "Element Details", we are able to see the "Planned Order" number. But it didnt indicate that whether it is a firm or not firm Planned Order.
Even if Planner were to inform them the firmed Planned Order number, Purchaser will have to check line by line to see which DepReq correspondence with the Firmed Planned Order.
Similar Messages
-
Conversion of Planned Order to Purchase Requisition thro MD04 for Quota Arr
While converting Planned Order to Purchase Requisition thro' MD04 for a Quota Arrangement material, on the screen in the Reference section Purchase org automatically does not default while for a non Quota Arrangement material it defaults. Need P.Org to automatically default.
Any suggestions
ThanksDoes anybody has no answer?
I have done some researches and i have found that i have to work on the transaction MD14. I have also tested the next enhancement project
LMDR2001
LMDZU001
but they are not called during the execution of the transaction even if those enhancements are activated.
Lello -
MD04 - How to create a requirement in MD04 for a scheduling agreement
Hi,
Pls advice How to create a requirement in MD04 for a scheduling agreement. pls mention the steps and t codes.
thanks in advance.Hi Prajit,
Sales people will create sales scheduling greements through VA31 T-Code (normally for finished products).In that they define forecast schedules as well as JIT schedules.After creation, these will be appeared in MD04 screen as requirement for that finish material.
In MRP run,system will create procurement elements (planned orders for example) for these requirements.
Regards,
Raja. -
MD04 for account assignment E and item cat L
Hi
I have created PR for perticular material X by running MRP. PR is created with account assignment catagory E and item catagory L. now i converted this PR into PO. my problem is PO is not visible in MD04 for x material. only PR is visible.
what is the problemHi,
Please can you explaing the scenarion you arew orking on? I didn't observe the combination of Sales oder with Subcontracting??.
For creating PO,it is not supporting PR document with account assignment E and Item categorty L.For this you may need to change config settings.(If try to change config settings...first you have think are changes really align with the business)
Thanks,
Sateesh. -
What is the relevence of MD04 for SD and what r the things we hav to look
what is the relevence of MD04 for SD and what r the things we hav to look
Hi Venkata,
MD04 will show a collection of the incoming and outgoing stock changes.
And for SD, it will display the content in table VBBE and VBBS (single requirement and total requirement).
The content was updated when the schedule line category is configured as relevant for requirement transfer.
And I often use MD04 together with CO09 to estimate/check a ATP checking result.
Hope this could do help!
Hongyan -
Purchase order not able to see in MD04 for MPN Material
Hi,
I have maintaned Scheduling agreement as well as demand management for my finished product
Purchase Requisition is generated for raw material. when i convert to Purchase order, i have to change the material code to MPN number. say PR was for material code ABC, in PO i have changed to ABC1.
But when I come back to MD04, I cant see the Purchase order at all!
If I go back to the purchase order and change the material code back to ABC, now i can see the Purchase order.
Please let me know if any customising is required.
Please guide.
Regards.Hi,
I saw with ABC1. I can see there but it is with exection message 20 i.e cancel process.
It should show the Purchase order in ABC only. -
Hello,
Is there transaction (or report) similar to MD04 that shows available stock for all materials on plant ?
By available stock I mean physical stock (MB52) reduced for open quantities on sales orders and deliveries.
Thanks, R.J.Hi,
Try for Tcode MB53 which will give u an overview for the Plant availability.
regards -
Multiple BOM Explosion in MD04 for the same material
Dear PP Gurus,
Scenario is make to order. BOM is created for production usage (1) & sales usage (5) for a Header material. Routing also exists for the same.
Once i run MRP at plant level or material level after creating sales order , BOM is expoded multiple times i.e. 3- 4 times but proposals ( planned orders) are created as per requirements.But BOM explosion when we click on show overview tree is happening multiple times which should not happen.
Our client business is not getting hampered by this but still he doesnt want explosion multiple times and to be precise it should not happen.
Can anyone pls. throw some light on this .
Thanks in advance . Answers will be rewarded for sure.
regards,
Nagraj VasmateHello Nagraj,
In MD04, On overview tree, it explodes all possible BOM for the header material.
System will explode all valid BOM's with usage 5 and 1 for that specific material.
Reg
Samson -
HI friends,
My requirement is to have the MD04 screen/data of more than one plant together in one screen for comparision for the planner.
Will it be possible.
Please advise.
Thanks in advance.
AKShi
in MD04 u can not view data for more than one plant ..this is a std functionality
Vishal... -
Conversion of planned order in MD04 for md04 for 50 plg strategy
For a fert having two semi finished materials inturn having 2 raw materials each using planning without final assembly 50, the VP planned orders are converted when the materials are checked usually there is shortage of semi finished again when I tried to convert the planned orders for semifinished in the stock there is availability but in the prod order there are logs giving me the material shortage. Can anybody clearly explain keeping the materials and particularly the strategy 50 the problem was haunting me from 2 days.
Ava check - availability check is performed on the basis of planned independent requirements.
please go through the link below
simulate as per this and let us know where is the issue aftter creating sales order?
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
please come back after going through the link and example -
Multiple line items for the same POs in MD04
Hi,
There is Purchase Order created for a material with other 5 line items.
When checking MD04 for a material it is showing multiple records with the same Purchase Order and the corresponding item number in the Purchase Order correctly, but with different quantities in each line in MD04 randomly.
I am unable to understand the reason for this strange behaviour.
Thanks
Ramakanth
Edited by: Ramakanth Y. on Jan 20, 2009 4:04 PMNo.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com -
ME57 add icon for access to MD04
Dear.
I need to add a new icon in ME57 layout in order to access to MD04 for every purchase requisition material.
Do you know exit/enhancement for obtain this ?
Thanks.Hi
Seek the help of Abaper .
Regards
Anand -
MD04 is showing material for whih nothing is pending
hello Experts,
I have a Material in MD04 for which scheduling agreement was created for XXXXX vendor, now when I see in sceduling agreement for both the material it is showing zero qty pending (open target qty).
When there is no open target qty for both the material it should not get displayed in MD04.
Why is it so?
thanks for ans. in advanceHi,
I encounter this issue before & This is sap bug , please check in OSS.
There's some OSS note example.
SAP Note 19854 - Reservations with quantity 0 displayed in MD04
TQ. -
MD04 - Planning time fence for materials that are planned externally
Hi,
I have to develop a report in R/3 which will pick up values from MD04 (for a particular material/plant combination) and show the output in ALV grid of materials which are not planned in R/3 but APO.
It should also show the planning time fence.
For example, if i goto MD04 in R/3 and enter a material-plant combination which has MRP type X0 (external planning), it doesnt show me the planning time fence.
This value/row has to be picked up from APO.
Any idea how to go about it and what are the Function Modules I should use or is there any alternative for this ?
Regards,
Anand.Hello Anand,
Try looking at user exit in MD04 that can change the values in MD04. Then, check for material-plant type of the order. If it is X0, call RFC to APO function module to read the information you want.
I have develop before a report in R/3 that read the correct time of an order in APO to be displayed in R/3. -
MD04 - Msg 26 appears for sales order completed 4 years ago
Hello,
When I execute transaction MD04 for a specific material, there is an order that was completely processed over 4 years ago that still appears in the Stock/Requirements list under CStock. The exception message that appears for the line in MD04 is the following:
26 Excess stock in individual segment
The sales order listed in this section has been completely processed, and the purchase order has been completely processed for over 4 years. Additionally, the sales order qty and purchase order qty have never changed (i.e. there wasn't a requirement for 4 and the PO was created for 8).
Can anyone provide pointers for how I can remove this line from MD04 and also prevent this issue from happening in the future?It turns out that for the sales order, for some reason there was still stock under MMBE "Sales Order Stock" for the applicable materials. After removing the materials via MB1A, Sales Order Stock is eliminated and the item no longer appears in MD04.
Maybe you are looking for
-
Hello All, I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer. Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a
-
Preview Pane and broken link issues in CS2 for Mac. Please help!
I posted this a few days ago - but would love to have some insight on how we can resolve this issue When I am working on html documents, both old and new, I have lost all of the 'preview pane' buttons. I can still see and have access to the layout an
-
How to send order details to third party in JAX-WS webservice
Hi all, I want to send all the order details to third party after an order placed. I have already created a pipeline link after sendFulfillmentMessage in processOrder. orderId, profileId, submittedDate has been sent but how to send all the order deta
-
Like two weeks ago, Firefox was normal and kick ass as per usual. Then I realized that Firefox had changed - when you are doing stuff in a tab for a particular website that you're browsing, Firefox now does this hella annoying thing where it "maximiz
-
Change in material valuation- MAP
Hello, When I change the valuation of a material with price control MAP in the T. Code MR21, the system creates accounting, controlling and profit centre documents. But the system does not change the price in the material master in the current valuat