MD04 MRP Data Element for Production Order add Order Status

Hi,
Currently in MD04 when you create a production order it gives the status in MRP Element Data as 000001138145/YP01/ and once I release this is shows the following status 000001138145/YP01/Re
I want to bring another status in how can you do this?
Thanks
Adeel Sarwar

Dear,
It is not possible in standard SAP to display the Lock production order as status 'Locked' are taking into consideration with regard to availability relevance in the MRP. MD04 display only those MRP element which are relevent for MRP calculation.
So better check this order in COOIS with LCK (Locked Status).
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Data elements for IDoc Segments to non-SAP system

Hi,
I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
Thanks in advance!!
Regards,
Sriram

Hi Sriram,
When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
Is it custom segments .
Regards,
Madhu.

Data element for mm.yyyy

Hello Experts,
Is there any data element for a field with the format mm.yyyy .
I need to place this field in the selection screen and i want to have an F4 help too.
It will be better if i am provided with the database table name too.
Please help. Useful answer will be rewarded.
Regards,
Vijayalakshmi

Hi ,
Data element for a field with the format mm.yyyy is FTI_MONTH_YEAR.
You can use this in selection screen as:
selection-screen begin of block b1 with frame.
parameters:p_date TYPE fti_month_year.
selection-screen end of block b1.
Regards,
Shanmugapriya
**Reward if u find helpful

Colective Settlement and "CLSD"Status for Production and Maintenance Orders

Hi dear experts,
Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
Thanks in advance,
Lígia Moreira

Hi,
You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
Regards,
Eli

Data Element for No.Containers(GR Quantity tab)- QANZGEB

Hi All,
We are planning to reduce the decimal length from 3 to 1 in Data Element for No.Containers(GR Quantity tab)- QANZGEB field , while doing GR in ECC 6.0 , So that if we receive 1000 containers , we can enter.
We want to Know , what will be the implication in the system, do you recommend or what is the other alternative and what step we need to take after the modification.
Thanks & Regards,

Hi,
did you finally try it ? I would need also...
thanks

Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

Hi Experts,
I am trying to Transport a request from DEV to QA,which consists Transaction Infosources, afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Data element for InfoObject AUFNR 0PM_ORDER could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
Data element for InfoObject TXTMD could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
please Could anyone give the Inputs to solve this , I'll be greatful to you.
Thanks & regards
SK

hello AJ,
Till now the problem is not solved , Please provide some inputs.
here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
Data element for InfoObject KOKRS 0CO_AREA could not be created
Activating Transfer Rules 0CO_OM_NTW_1_SA ...
23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
Formulas have been saved
PLEASE PROVIDE SOME INPUTS.........
Message was edited by:
S K

Mass update for production and planned order MRP controller

Hi Gurus,
It's anyway possible to mass update MRP controller for Production orders and Planned orders. If any please provide me step by step process.
Thanks,
B.Deethya.

I feel You have changed the MRP controller in Material master and want to incorporate same in production order & plan order.
For Planned order Run MRP with delete and recreate mode, system will create a new plan order with MRP controller in Material master
For production order, Mass change is not possible, create a simple BDC or LSMW, And change the MRP controller

Data element for new column

Hi All
I have to add one column in exisitng custom table. the new column is SRFLAG which will contain value Y or N.
Can any one suggest me what will be data element? I want to use existing data element?
please suggest existing table also in which it is used?

Hi Dude,
I will tell u a way to find the answer on your own.
Go to SE11,choose DATA TYPE radio and press F4.
Press Search for Data elements.
Enter a relevant short desc., with asterisk.
For eg., yesno*
Then enter the Data Type as 'char' and Length as 1 and press continue.
A list appears containing the relevant DEs.From there choose
the required one.
Change your search options and try till you get the required one.
To find the Table enter the name of the DE in the Data Type field and choose the where-used list icon.
<REMOVED BY MODERATOR>
Regards,
Lakshmanan
Edited by: Alvaro Tejada Galindo on Feb 14, 2008 11:26 AM

Assistance with Data Merge for product sell sheets

Last year I started creating product sell sheets for our sales team. The sell sheet is built containg these elements: A product photo, a data table displaying product numbers, descriptions etc.. Underneath the photo and table is a text box. I have created a lot of these sell sheets for a variety of product categories. The prices are updated fairly often, maybe once every month or two. I created all of these using excel and Illustrator. Other than photoshop, Adobe products were forign to me and never looked into what indesign was capable of until now.
I am wondering if the data merge feature would be a good fit for what I am doing. I would be more than happy to share my project files. I am asking for a little bit of hand holding here to expedite this process. Anyone out there willing to take a look and help me out??
Project Files:
PDF Sell Sheet created in Illustrator (would like to have the same look and feel but have the data automated in Indesign)
Excel Data (Looking to reformat the way the data is displayed so that it would work well with Data Merge)

I don' think data merge will lend itself well to that sort of layout. It's just not sophisticated enough. For datamerge, all the data for each module has to be in one row on your excel sheet. Example: The setup on top will yield the example below. The image has a placeholder in the far left.
For your example, I think your best bet is to set up table styles. (table styles won't hold column widths, but there is a script that you can use for that: it's referenced in this thread. If you make good use of paragraph styles and table styles, it will still go much more quickly in InDesign.
http://forums.adobe.com/message/4929669

S_ALR_87012168 - Due Date Analysis for Open Items - Add Characteristics?

Hello,
I am trying to add a characteristic to the output of this report. I am trying to add the Reference field from BKPF to the list of available characteristics to choose from. It is available in the dynamic selections list so the field should be available in the program, I am just not sure how to get it onto the char. list.
S_ALR_87012168 - Due Date Analysis for Open Items - SAP delivered Report Painter report.
Any help would be greatly appreciated!

Try:
Go to -> Line items
You can change the display variant there to include the reference.
Rob

Data element for Month and Year

Hello All,
Is there any data element which will have only Month and Year.
I have to introduce this field in a table. It should have convesion exits also.
Ex: If i give 092009, it sould come like 09.2009
Thank you.
Best Regards,
Sasidhar Reddy Matli.

Kindly Try this code for Month and year as input and having standard F4 help..
INCLUDE RMCS0F0M.
TYPES : BEGIN OF TY_SELECT,
MONTH TYPE FTI_MONTH_YEAR,
END OF TY_SELECT.
DATA : WA_SELECT TYPE TY_SELECT.
SELECTION-SCREEN : BEGIN OF BLOCK SANDEEP WITH FRAME.
SELECT-OPTIONS : S_MONTH FOR WA_SELECT-MONTH OBLIGATORY NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN : END OF BLOCK SANDEEP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MONTH-LOW.
PERFORM MONAT_F4.
SANDEEP JAIN

Standard data sources for Delivery and Purchase order quantity.

Hi gurus ,
Are there any standard data sources available for Delivery and Purchase Order quantity in Purchasing area .
Thanks in advance .

Hi,
If you are looking for SD Scenario: Check this : https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Happy Tony

Data element for time in 12 hour format HH:MM

Hi friends,
Is there any data element which is for HH:MM format 12 hour format?
i see uzeit, but its HH:MM:SS. i dont want this.
i want HH:MM.
Niraja

Rohan,
I am trying to create a new Domain with data type Tims. Basically when i change the no. character to 4.. its not taking
by default its making it as 6. How to make this to 4.
i can give Numc, but i needed in HH:MM format. with : in between.
can u help me out.
Niraja

Business catalyst API integration for products, customers, and orders?

can a BC site be used with a API program for feeding products, customers, blog posts, etc?
Thanks,
Michael

BC has SOAP API for Products and the CRM, no API out yet fully for blogs.

MD04 MRP Data Element for Production Order add Order Status

Similar Messages

Maybe you are looking for