Md04 Nit showing sub BOM ?

Hi Gurus,
i have created a MTO material With Two Levels Of BOM i ahve created a sales order and created aproduction order Through CO08..
i have not maintained stock for any material,.. when i checked in md04 stock requirement is showing only for first level bom components... for second level bom stock requiremet is not showing.. is this standard behaviour or any errors in proces.....
Thanks&regards,
Venkat.

HI Anil,
stock is not available for any Item. actually my doubt is sytem has to show the stock requirement once a production order has raised for the BOM.
hear system is only showing requirements only for first level components.. it is not showing stock requiremets for second level bom components.... as all the settings is currect and this is done under plant 1000 ...
ThanksRegards,
Venkat.

Similar Messages

  • MD04 still showing outstanding PR.

    Hi all,
    MD04 still showing outstanding PR although i already open the PO and also done for the goods receipt but the it still list out the PR. And when i double click on the PR, it give a message said that "the purchase requisition has been completely ordered."
    pls advise on how to remove it,
    thanks.

    Hi,
    Please go to t code ME52N go to item details and quantities/dates tab and tick the button closed.It will not show in MD04
    Thanks
    suresh

  • MD04 still showing closed PO items

    Dear All -
    MD04 still showing the closed PO items. I tried running the report SDRQCR21. But it didnot correct the MD04 listing. And it also shows the PO items which are quite old ( more than 3 years old closed items).
    Need your ideas to remove the closed PO items from MD04.
    Thanks,
    Siva

    You mentioned "Good issue" so I suppose your PO is a STO (stock transport order).
    In this case, check that the ordered quantity, GI quantity and GR quantity match.
    They probably don't as you wouldn't otherwise get the error message stating the GI and GR are not the same.

  • Spry menu does not show sub menu on iPhone

    Hi there,
    Spry menu bar from CS6 does not show sub menu on iPhone. Please help.
    Thanks,
    Tee
    <TA

    I was debating Sudarshan's
    if your Spry menu is triggered on 'hover', it will not work on an iPhone as touch-screen phones cant do 'hover'.
    any menu with NO hover (mouseover) effect or trigger will work on touchscreen devices. Pick a menu plug-in that doesn't have any associations to 'hover' factor.
    as most touch-enabled menus will still contain hover rules or mouseover javascript handles. Even most JQuery menus will contain :hover rules.
    There is no disagreement about that with you, Al.

  • Displaying BOM With Sub Boms

    I want to display the bill of material within its component's sub boms as well in one page as a view of hiearchy..How to do so?
    Can anyone explain?

    Hi,
    Check whether T code CS11 helps you.
    Nikhil

  • Show Sub-Folders in Finder

    Is there a way to have Finder show sub-folders as well as folders when I perform a Save As in Pages?

    MUCH apologies!
    This problem is NOT in Pages but in iPhoto.
    When File, Export is chosen, only certain folders are shown (recent) and there's no way to navigate to any other locations.
    Very sorry for my mis-leading question...
    Scott

  • Material Description not Showing in BOMs

    Hi ,
        Material Description not Showing in BOMs but we maintained the description in Materal Master.

    Ltawada,
    Then it must be a SAP-Program error. Look for OSS notes for this problem, shall let you know the number If I find.
    Regards,
    Prasobh

  • Face app on my nokia 720 is nit showing..same upda...

    When I log onto my app face book on nokia 720, its nit showing me all friends update , eg when I log onto the face book web lage it shows diff first update and the app need feed is different..please advise if I need to change aiwn settings

    Hi IvanTsintsev,
    Thanks for your post and welcome to Nokia Discussions!
    Please perform a hard reset and software update with Nokia Suite to resolve this issue. 
    Connect your phone to Nokia Suite and make a back up via Tools > Back up. Don't tick the Settings box. 
    Disconnect your phone from Nokia Suite and enter *#7370# and default security code 12345, unless you've changed this code yourself. When the phone has rebooted, reconnect to Nokia Suite and click on the green arrow icon where you can update the phone's software. If no update is available, please reinstall the current software. This option will be displayed in blue. 
    When the phone has been updated, restore the back up via Tools > Restore and this should fix the issue. If you're still can't use maps, try uninstalling and reinstalling the maps through Nokia Suite.
    Let me know how you get on!
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • How do you get your Iphone to show sub folders in the mail program?

    Hallo
    I Have a lot of sub folders in the mail program, that I use to distribute my mails according to projects but they do not show on my Iphone? Is this function not possible?
    Thanks!
    Mikkel

    I didn't set anything - it just happened. I think it only works for IMAP accounts. If yours is IMAP, the only thing I can think of is to delete the account and set it up again

  • MD04 is showing closed PO

    Hi All,
    I need a strong help on subcontracting PO shows in MD04 of component.I have checked all the PO status and it is closed.when i have checked MD04 for components still the requirement exist.
    can any one provide me how to get rid of it, Or any OSS Notes?

    Hi,
    Try OSS notes 115899, 128061 and please check conneting notes as well.
    Regards,
    Csaba

  • BPM 11g Workspace Audit Trail not showing Sub process inner activities

    Hi all,
    I have been developing some BPM Process in JDev 11.1.1.5 and have deployed them in BPM Suite 11.1.1.5 over Windows Server 2003. I've found the following and would like to hear your opinion:
    1- The Process audit trail in BPM 11g Workspace shows the activities of the process but the Sub-Process call activity appears as just a single activity and you can not see the inner activities of the sub-process... making impossible to track the sub-process.
    2- In the EM Instance trail you can track the subprocess activities, but they appear wrong; diffrent names, diferente types (ex: interactive activity shown as service call)..etc..
    Are these known issues? is this the expected behaviour? Is it just some configuration I missed?
    Thanks for your time.

    For anyone with the same question, I got this from Oracle support about both questions:
    1- I checked with our Engineering team and regarding the expanding of the subprocess activity , it is planned to be released in 12g. So right now , it is a work in progress feature being addressed by our developers.
    2- Thanks a lot. I have reported a bug 12909848 to our Engineering team. You can track the status of the bug from the SR.

  • MD04 can show all the mrp area elements of a material ?

    Dear guru.
    MD04 show in the same view the elements of only one selected mrp area for a material.
    Do you know an exit or other in order to show in the same view the elements of all the mrp areas ?
    Thanks.

    That's the only BADI I can think of that can help you.  If it doesn't suit your need, then you need a new ABAP reporting.

  • In sales order does not not show sales bom component

    hi to all,
                it is possible if i create one sales order and i connect one sales bom to order and do not display component of sales bom in sales order so pls tell me procedure.pls tell me how to set print layout of sales order without sales bom component
    Regards
    vishal

    Hi,
    To do not show the component items in Sales Order, you should use Assembly type of BoM.
    Here I copied the differences between them which is from Online Help.
    The sales bill of materials and the assembly bill of materials represent a finished product which is assembled at the sales stage.
    The difference between the assembly bill of materials and the sales bill of materials is as follows:
    ·        Assembly bill of materials; the finished product appears in the sales order document.
    ·        Sales bill of materials; both the finished product and the components appear as separate items in the sales order document.
    Hope this helps you.
    regards,
    maggie an

  • Md04 not showing Overview tree

    In my case  MD04 is not showing the overview tree.
    First case
    For material x if i put Plant  and MRP area same then its not showing the overview tree.
    Second case
    When i put MRP area (as per configuration ) and plant in this case it is showing the overview tree.
    please suggest.

    Dear Amit,
    system is giving correct results,
    if your order will show the tree in which mrp area it is.
    now suppose you dont put any MRP area in the intial screen and put plant only. then system will consider that plant same as mrp area.
    now if you put the the MRP area and the respective plant.
    orders in that MRP area will be shown. and order is is only shown when there is pegged ordes to that order.
    in your case there may not be dependant orders.
    and you cant see the same orders in 2 cases you told.

  • MD04 is showing material for whih nothing is pending

    hello Experts,
    I have a Material in MD04 for which scheduling agreement was created for XXXXX vendor, now when I see in sceduling agreement for both the material it is showing zero qty pending (open target qty).
    When there is no open target qty for both the material it should not get displayed in MD04.
    Why is it so?
    thanks for ans. in advance

    Hi,
    I encounter this issue before & This is sap bug , please check in OSS.
    There's some OSS note example.
    SAP Note 19854 - Reservations with quantity 0 displayed in MD04
    TQ.

Maybe you are looking for