MD04 requirememt qty for component

Hi dudes,
I'd like to know your thoughts on this one.
First I have this component which is non backflushable.
Then I create a process order with 1000 qty. Then I check MD04 and it requires 1000 qty for the date that I set. Then I do the 261mvt with 200qty for this component, when I check MD04, the requirement qty is now 800. Then I do the reversal 262 with 100 qty. Then i check again the MD04 and it says that the requirement qty is still 800.
I thought it wouild be back at 900 since I reversed the 100 qty.
Is this normal?
Thanks.
Ellen

Ellen,
You ,must have performed an Unplanned Reversal. I.e not with referance to previous Material document(MBST-Cancellation) or Reservation.
That's in the intial screen of MB1A, after entering Movement type from the Menu click Goods Issue->Cancel with Referance->To Reservation, in the pop-up screen input the order number for selection, then process the next steps for cancellation.
Regards,
Prasobh
Edited by: Prasobh Karunakaran on Apr 16, 2009 2:49 PM - Additional details added

Similar Messages

  • Batch determination for component  in co11n

    Hi Gurus
    This is my Scenarios
    Component A - Batch - 120 - Qty 2.00 MT
    Component A - Batch - 121 - Qty 4.00 MT
    Suppose if there is a requirement of 3.0 MT for component A in Production order , when i do Batch determination ( w/o dialog box ) the system proposed Batch 121.
    But since Batch 120 is produced before 121 , i need the system to propose Batch split as follows
    Batch - 120 - 2.00 MT
    Batch - 121 - 1.00 MT
    Is it possible without Dialog batch determination
    Regards,
    Prasanna

    Hi,
    Yes, u can split Batch  manually  without Batch determination.
    Goto Component Overview -> Select the Component ->Edit ->insert->batch split (CO02)
    Now u can enter Batch and qty manually.
    Pradeep
    Edited by: Pradeep Kumar on May 23, 2008 9:24 AM

  • Is ther a FM to get the open order qty for a particular material &salesorg?

    Hi experts,
                    I have requirement to find the open order qty for a given sales org (plant will be even better ) and material in my report. I do not want to use the standard tables as i need to fetch all records without any time restriction.So it is takin a lot of time.
    I know i can find it in va05 but i want to know if ther is  some standard function module which can serve this purpose.
    Kindly help.
    regards
    Ashwin

    Thanks for the reply,
    Can you kindly elaborate what i need to pass to the function module ?
    What do I have to pass in the tables LVBMTV and LSELTAB ?
    In which field will i get the open quantity for the material and salesorg ?
    Kindly help,
    Regards
    Ashwin

  • Open Qty for Contracts in Purchasing

    Hi,
    Is there a standard config for Open Target Quantities for Contracts, as there is for standard POs (there is Open Qty - 0BO_QTY - within the 0PUR_DS03 transformation), but I need to show an Open Target Qty for Contracts.
    The value exists within RM06A, field name OFZMG but it is not part of the standard Purchasing extractors, whereas the Target Qty is.
    Any advise appreciated.
    Thanks,
    Scott

    Hi Daniel,
    Thanks for the reply.
    Yeah, I know how to enhance the standard extractors but the logistics extractors are different where the standard LIS extractors actually contain a whole load of additional fields that you can ehnance via LBWE.
    If I enhance these with the append structure and some code, then it could cause issues with enhancing via the standard LBWE in the future.
    Thanks,
    Scott

  • CLOSING STOCK QTY FOR THE DATE

    Hi
    Can any body tell, In which table i can find the closing stock qty for the particular date and for the particular material without including intransit stock qty.
    Regards
    Mani.

    Dear Santhosh,
    Yes, we tried to take the last MBLNR(Value) of the date from MKPF and Try to use the LBKUM Field from MSEG table. But the LBKUM value is with intransit stock.
    So , we failed in that logic to bring the warehouse stock for the date.
    Any other suggestions pls.
    Regards
    Mani.

  • WDRuntimeException : Failed to create delegate for component

    Hi Friends,
    I encountered the following error while deploying the application to local DC. Actually, i'm trying to create a new view 'HCFileUploadView' in the existing application.
    An error has occurred:
    "Failed to process the request."
    Please contact your system administrator.
    Hide details
    Web Dynpro client:
    HTML Client
    Web Dynpro client capabilities:
    User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
    Web Dynpro runtime:
    Vendor: SAP, Build ID: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:49:12[UTC], changelist=329752, host=PWDFM026)
    Web Dynpro code generators of DC local/CRRSRatingWDP:
    SapDictionaryGenerationCore: 6.4011.00.0000.20050127161623.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:34:47[UTC], changelist=324383, host=PWDFM026.wdf.sap.corp)
    SapMetamodelWebDynpro: 6.4011.00.0000.20050121170001.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:38:14[UTC], changelist=322883, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCore: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:49[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
    SapWebDynproGenerationCTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
    SapGenerationFrameworkCore: 6.4011.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:00[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
    SapIdeWebDynproCheckLayer: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:02[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
    SapMetamodelDictionary: 6.4011.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:32:12[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCommon: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:59[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationCore: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:32[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
    SapDictionaryGenerationTemplates: (unknown)
    Web Dynpro code generators of DC sap.com/tcwddispwda:
    No information available
    Web Dynpro code generators of DC sap.com/tcwdcorecomp:
    No information available
    J2EE Engine:
    No information available
    Java VM:
    Java HotSpot(TM) Server VM, version: 1.4.2_06-b03, vendor: Sun Microsystems Inc.
    Operating system:
    Windows XP, version: 5.1, architecture: x86
    Error stacktrace:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for component com.mbb.crrs.web.webdynpro.component.DefaultRatingController. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
         at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:38)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:349)
         at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:599)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
         at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
         at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:74)
         ... 26 more
    Caused by: java.lang.ExceptionInInitializerError
         at com.mbb.crrs.web.webdynpro.component.wdp.InternalDefaultRatingController.<init>(InternalDefaultRatingController.java:192)
         ... 31 more
    Caused by: com.mbb.crrs.common.exceptions.ApplicationConfigurationException: Cannot load System Properties.
         at com.mbb.crrs.common.SystemContext.<init>(SystemContext.java:39)
         at com.mbb.crrs.common.SystemContext.getInstance(SystemContext.java:47)
         at com.mbb.crrs.common.LoggerFactory.getLogger(LoggerFactory.java:60)
         at com.mbb.crrs.web.webdynpro.component.DefaultRatingController.<clinit>(DefaultRatingController.java:737)
         ... 32 more
    Please help me on this issue.
    Thanks && Regards,
    Vijay.

    Hello!
    I face the same problem with Failed to create delegate for component:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for component
    XXX.YYY.ZZZ..ume.Ume. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
    Caused by: java.lang.reflect.InvocationTargetException
    Caused by: java.lang.NoClassDefFoundError: com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClass
    I think this started after upgrading from 7.01 SP3 to SP5, but I'm not sure.
    What was it that solved your issue?
    *I found the error. My ProjectProperties.wdProperties did not contain the references it needed.*
    Edited by: Richard Linnander on Nov 23, 2009 2:33 PM

  • Costing variant , how to config rounding for component quants ?

    Hello everyone ,
    i am new to CO-PC
    my user want to change rounding for component quants.
    Current setting is u2018Round up with Nondimensional units of Measureu2019.
    This affects too high loss in standard product cost due to rounding up.
    For instance, 24 pieces of product are packed in one shipping carton.
    Based on standard cost calculation per 100 pieces,
    shipping carton usage is computed as roundup of (100/24) which is 5 pieces.
    Once in the actual production,  production lot size is 10,000 pcs.
    Target shipping carton usage would be automatically calculated as (5*24,000/100) = 1,200 pcs
    whereas in the reality, 1,000 shipping carton should be used (24,000/24).
    As a result, material usage variance is shown too high due to rounding up.
    you can see detail in below website (there is only picture in website)
    [http://picturepush.com/public/4467052]
    thank you in advance.

    Hi
    I dont think this behaviour can be changed....
    There is a workaround though, in acordance with SAP recommendations
    Increase your costing lot size to 10,000 or 1000 or as much as reasonably possible... Also, increase your Price Unit and keep it same as Costing Lot Size....
    For Existing Material Masters: Go to T code MM17 and change MARC-LOSGR (Costing Lot Size) and MBEW-PEINH (Price Unit)....You can change in mass mode
    For New Material Masters:  Using BADI MATERIAL_REFERENCE, you can default the costing lot size and price unit as 10000 or 1000 as desired
    Regards
    Ajay M

  • At the time of MIRO against STO full qty for invoice is showing.

    We have created STO for lumsum qty and then created OBD with PGI and GRN for breackup  qty,but at the time of MIRO against STO full qty for invoice is showing ,and we want respective breakup qty in respect to OBD or GRN no. as reference.

    Have you done PGI and GRN both for partial quantity ?
    Can you show the screen shot for PO history and MIRO ?

  • Delivery Qty for Material is less than P.O. while doing STO from Plant

    Dear All,
    Please help me in this issue.
    While doing STO from one Plant to another Plant, The picked Delivery qty in VL10D is less than P.O. qty for one perticular
    Material. What could be the issue and solution from it.
    Regards
    AJIT K SINGH
    Edited by: AJIT K SINGH on Jun 8, 2010 2:01 PM
    Edited by: AJIT K SINGH on Jun 8, 2010 2:03 PM

    >
    AJIT K SINGH wrote:
    > Dear All,
    >
    > Please help me in this issue.
    > While doing STO from one Plant to another Plant, The picked Delivery qty in VL10D is less than P.O. qty for one perticular
    > Material. What could be the issue.
    >
    > Regards
    > AJIT K SINGH
    Seems like the stock is not available for the particular material, thats why it is picking up the less amount which is available in stock, or the ATP check has blocked the stock available, and you have certain pieces available currently for the said material.

  • Web Dynpro Java : Failed to get deployable object part info for component

    Currently we have a web dynpro java project which connects to the ABAP backend with Web Services. Everything seems fine, and when we transport to the production server via NWDI, we have the following error. Everytime we try to access the application , the error is occurred.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to get deployable object part info for component com.sie.attachmentcomp.AttachmentComp
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.getComponentDeploymentDescription(ClientComponent.java:784)
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:934)
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:177)
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:116)
    It is working properly in our development , and testing environment. Only production has this error. And one weird thing is that this particular error occurred only sometimes to some user. For example; I could not access to the application with this error yesterday but my friend can access. Today, I can access in the morning but my friend cannot. For another friend , Yesterday he can access by using IE but not by Firefox. But today Firefox is fine but not with IE. It seems crazy.
    For more information, in our J2EE engine for the production server, we have 3 server nodes (clusters). And we are not sure it is the source of the problem. Is there any solution , and any way to know from the application that we are on which server?
    We also go and check from the Content Administrator in Web Dynpro Console. Under our project name, in the list of Components, sometimes we can see AttachmentComp but sometimes not.
    Please help us as our project is about to go-live next week.
    Thanks,
    Yu

    Hi Meenge,
    Please check below document for finding root cause for "Failed to start deployable object part info for <development component> and application <application name>"
    http://help.sap.com/saphelp_nwce711core/helpdata/en/44/7716e1633a12d1e10000000a422035/frameset.htm
    OR http://help.sap.com/saphelp_nw04/helpdata/EN/f4/1a1041a0f6f16fe10000000a1550b0/frameset.htm
    Hope it helps
    Regards
    Arun

  • Is a user defined for component AF - error ?

    Hi All,
    In my RWD > Component Monitoring - I have an alert showing up on the Adapter Engine, for the Self-Test Status.  The error is on "Is a user defined for component AF?"
    Any ideas how to resolve this ??
    Thanks
    Shane

    If this is in "Is a user defined for component AF" in red click on the details next to it ...it will show up what the problem is...
    Usually XI uses XIAFUSER to connect to AF....Check whether these user is specified in exchange profile and then also check whether this existing and not locked...
    Hope this helps...
    Regards,
    Ravi.
    PS. Please post the solution once you solve your problem, so that it helps others and also close the question.

  • Special stock indicator for component in process order

    Hi,
    There is a field in process order where we can maintain special stock indicator for component.
    In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
    Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
    Q - where to define this master data. I could not see such fields in BOM?
    regards,
    Mohit

    Hi Sunderesan,
    Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
    My requirement is that system should propose '3' in special stock indicator in process order.
    Request to look into this.
    regards,
    Mohit

  • Error in Solar02 " Error - No system found for component SAP LEARNING.....

    Hi,
    I have selected the Business repository from the Tcode Solar01c, and i can see the list of configuration under Business Scenario,
    when i am trying to execute any Tcode,(My understanding is that this Tcode must execute in Development system) it gives the following Error,
    " No system Found for Component SAP Learning Solution and Role Evaluation system in project ZPROJ.
    In SMSY i have created Two systems Dev :100 and Qas:300  Which are assigned to one logical component whose producted Version in SAP ERP.
    Please advise by reviewing above scenario.
    Regards,
    SM

    Hi Irfanl,
    I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
    "No system found for component and Evaluation system in the Project"
    But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
    Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
    Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
    Click Copy
    This should replicate to all nodes and then you should be able to assign transaction to the business processes.
    Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
    If not, there is a similar work around which also works.
    Go to transaction SOLAR_PROJECT_ADMIN
    System Landsacpe Tab
    Systems subtab
    Click System Role Assignment
    Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
    Save Project
    Go to SOLAR01 and it should reflect it in the Blueprint.
    You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
    Hope this helps,
    -Rohan

  • Total issue qty for given period.

    Hello
    Plz let me know whether Total issue qty for given period is stored at any place in R/3??
    There is requirement to calculate value for given period as Value of Total Stock - Value of Total issue qty.
    Thnx
    Nilesh

    Hi,
    If u issue the stock, or if u receiving the stock
    the system generate Material Document,so u can find at any time in MSEG table
    Thanks & Regards
    Suresh
    > Hello
    >
    > Plz let me know whether Total issue qty for given
    > period is stored at any place in R/3??
    >
    > There is requirement to calculate value for given
    > period as Value of Total Stock - Value of Total issue
    > qty.
    >
    >
    > Thnx
    > Nilesh

  • Best MRP type and strategy to run MRP for component using PIR and forecast

    Hi Experts,
      I want to run MRP for Component parts. I need to run MRP based on Planned independent requirements and Forecast Data.
    Which is the best suited MRP type and strategy.
    Please help to share bestpractices if any. thank you.
    Rayudu

    Hi,
    is the components you are talking are Semi finished materials or Raw materials and Packing materials which are procured from vendors ???....
    It is not a good idea to maintain planning strategy for Components which are part of BOM...these materials are automatically planned when the header materials of these components are planned....
    If these components are not part of any BOM then you can try the option of using forecast based planning.. MRP type  VV and maintain the forecasting view in the material master
    You can also explore the option of consumption based planning like manual or automatic reorder point planning...
    Thanks
    Kumar

Maybe you are looking for