MD04 with PO number from SO

Hi friends
In my MD04 screen i am able to see the SO number /line item is it possible to show the PO number from SO .
Regards
Mahesh

Hi,
not able to see the PO number from SO.by useing MDo4 we can check the stock requirements.
regards,
dhanush

Similar Messages

Replication of BP linked with Customer number from R/3 to CRM

Hi,
We are trying to replicate BP linked with the customer number.
In R/3 when a BP is created automatically a customer is created for this BP (due to activation of synchrozination- BP -->Customer ) with different numbers and is available in the customer-general data tab of the BP in the field - Customer number.
Both BP and Customer are having different numbers this needs to be replicated to crm as a BP with the Customer number appearing in the Identificatio tab as R/3 customer number (identification type).
Example - A BP with number-100 is created then automatically a customer with number 2000 is attached to this BP -100. The same needs to be replicated to CRM. Both BP and customer shud have same GUID.
With the settings that is done now two records are getting created seperately one with BP number and other with customer number based on settings in PIDE.
How can we configure this?
Thanks & Regards
Prathiba

Hi,
I think you are using some IS component in ECC. Hope you are using BUPA_MAIN and BUPA_REL objects for downloading BP's to CRM. In PIDE you do not need to maintain mapping for customer.

Billing Document Number saved with Preceding Number from Number range...

Hi Everybody,
I am facing with some irregular problem which is as follows :
For example, Billing Docs created in the month of January was saved with number series like 10161, 10162, 10163 .....and so on....
But the user has creatd the document in February and it got saved with number like 10121......which is a preceding number and there is only one document like this....
The number range is Internal Number Range...even though it got saved with preceding number.
Can anybody plz tell me why this has been happened ?????
Proper answer will be rewarded....
Thanks in advance....

Hi Chaitanya,
Please check whether someone has changed number status in VN01 and previously 10121 was not used.
also check whether you are using ztable for number range depending upon plant.
Regards,

Problem with Serial Number from MSi ATi HD4870 :/

Hi all,
I have problem with my HD4870. I lost the serial number (the small paper on back of card) from card. Have I any chance to get it back? I can take a photo and post it here some S/N and P/N from card, if it helpfull... I lose my warranty, if I can't get it back
So, any choice to get it?
Thanks for answers,
Mirek.

Thanks for answers in first,
I have problem with card - I had it two days in Crossfire with another HD4870 but accidentally when I played Metro 2033 I got some stripes on monitor (purple, blue) and then PC stop working. I had to restart PC and when the system booted to Windows, until 10 second I got the same stripes on monitor. Then my PC didn't boot.
On my card I have 4 diodes - when I turned on pc, the diodes blinks but now blinks only TREE of FOUR diods.. So I took the card to shop when I bought it, but the shop-assistant told me, that I need this little paper on Card.. :/
I'm from Czech Republic, so I have a little problem with directly contact to HQ of MSI
So I have to go again to the shop and tell them, that Serial Numbers what they need are in card?

[JS] Export jpg from each page with specified number from database

Hello,
I imported a database into InDesign (CS 5 with OS X 10.7.2), so that every product and product number is on a different page in InDesign. Now I need to export each page to a jpg-file. The name of the jpg should be "productnumber.jpg".
I found the script „PDFExportCropper.jsxbin“, which does what I want but creates pdf-files instead of jpgs.Thereafter, I can convert the pdfs to jpgs automatically with Photoshop.
But: The script takes hours and hours to create the pdf-files: Right now, more than 8 hours for only 100 pdf-files. The database has 65.000 products!
Any idea to improve the workflow? Any other script available which I did not find but does what I need?
As a designer, I have no experiences at all in scripting.
Thanks for answering!
Best regards
Rainer
from Germany

I think I fixed it.
In line 20, I have now the following code:
var page = myImage[i].parentPage.name;
Is this the right way, to get the actual page?
Also I would like to know, how can I export the images cropped to their "box"? How do I have to change my script?
Thanks

Populating Account field with totaled number from Activities.

All-
Got a curious one.
We're using activities to count up the numbers from various site visits. What we want to do is have the number just populate automatically on the account record. So, whenever a new activity is saved, or an older one is updated. We want that number to update on the account. Is this a workflow thing? a Joinfieldvalue function thing? Both together using the Account ID to tie them together.
So, on the activity record, there are various number fields for different value. But we're also having a total field that adds it all up. We want that field plus all the other total fields for activities attached to this account to be added up and place on the account record in a custom field.
Any suggestions would be much appreciated.

I think you may be right. I did some research and came up with this.
Use query builder and default values to populate Activity records with information from the associated Account record. Then the User would enter any new values on the Activity, and, upon saving, a web service would be triggered to populate the revisions back to the Account record. This way, the Account record would always have the most current values, and the next time they have an activity, the activity would be populated with the most current values.
We can’t go from the Activity to the Account. That’s why it needs to be the web service for this portion. There needs to be a one-to-one relationship defined, and on one Activity record you can define one Account that is related to it. But it doesn’t work the other way, because an Account can have multiple activities and there’s no way to define “THE” activity.
Does that sound right?

Locating row with invalid number from table with few million rows

We need to query the a table or a view of same to obtain a id of type VARCHAR with bind value being NUMBER. Any attempts in this regard I try seem to result ORA-01722: invalid number. Once case is below here
SQL> select TEXT_ID FROM ATT_TABLE where to_number(TEXT_ID) = 9411956;
select TEXT_ID FROM ATT_TABLE where to_number(TEXT_ID) = 9411956
ERROR at line 1:
ORA-12801: error signaled in parallel query server P010
ORA-01722: invalid number
1. TEXT_ID column is meant to have numeric values in VARCHAR type. It is possible that some record / row is not complying. How can I locate the non-complying records ?
2. What would be a VIEW definition that would return only records with valid numeric data in TEXT_ID column.
Edited by: bonjonbovi on Feb 13, 2009 3:58 PM

Of course the regexp_like is really cpu expensive, but there's no other solution in your situation
The only way to differ numberic value from character, is REGEXP_LIKE function
But you can do it using PL/SQL
BEGIN
   FOR c IN (SELECT TO_NUMBER (ID) ID
               FROM test_number)
   LOOP
      DBMS_OUTPUT.put_line (c.ID);
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      NULL;
END;

Trying to FaceTime fiancé with a phone number from japan

i have an iPhone with a number from the us and my fiancé is stationed in japan and has an iPhone with a japan number. we use wifi and still whenever we try to FaceTime it tries to connect but never goes through, any ideas of why and how we can FaceTime?

Has Facetime been activated on both phones?

Can I activate with a phone number from another state?

Hi, I'm thinking buying the phone but wanted to know if I can or how I can activate it with a number from another state. I travel between Hawaii and Nevada a lot and was thinking about getting a local number in Nevada for the iphone. However, all my billing adresses from credit cards have Hawaii addresses. I also don't have any kind of address in Nevada. Anyone know if this can be done?

reading the OP's statement...
The OP lives in Hawaii and wants to activate a iPhone with a Nevada phone number which the OP does not have yet. The OP also has not billing address in Nevada or any Nevada address. Now while AT&T will give you a out of state number and they will carry a out of state number with you. iTunes is set up to give you a local number, upon activating a new phone iTunes is not designed or equipted to let you choose which areacode you would to start your AT&T account.
*You are correct but not in the case of what the OP is asking for*... The OP does not currently have this number, so once again for the correct advice is below
+iTunes will not allow you to request a number from another state that is different from your billing address, you will have to call AT&T first to setup the account, then activate within iTunes+

I replaced my iPhone with a Galaxy 5 and am not receiving all of my text messages. The sales person told me to remove my phone number from iTunes to stop this from happening. Is that true? What does iTunes have to do with text messages?

I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?

You need to remove your phone number from the iMessage system.
Read here: http://support.apple.com/kb/ts5185
~Lyssa

HT4061 I upgraded and no longer have an iphone. Now my fiance nor anyone with an iphone can text me because it still wants to use iMessage even though I have removed my number from the icloud, apple, and itunes. I have no idea what more to do.

We have already deleted my name and number from his iPhone, and tried re-adding it. It still lists my number as an iMessage. It is not feasible to ask everyone in my contact list with an iphone to turn that off so that they can text me. Please help. I've already done everything that I could find online, deleting my number out of everything and nothing has helped thus far. Thanks in advance.

Hi tinkdgw99,
If you are having issues receiving text messages after switching away from an iPhone, you may find the following article helpful:
iOS: Deactivating iMessage
http://support.apple.com/kb/TS5185
Regards,
- Brenden

How can I get a document from apple online store with IMEI number on it?

Hi
I got my iPhone stolen, and currently have insurance requesting a document with IMEI number on it, I called apple and they say this doesn't exist?
I tried to explain to insurance, but they won't listen. I have sent in packing list, shipping notification, and scan of sticker on box with IMEI and serial number.
2nd email
Thank you for your email. We require a document with the full IMEI number on it. Once this is received we will be able to continue processing the claim.
Kind regards
1st email
thank you for sending us your documents, unfortunately the proof of purchase you have sent in does not show the serial number or the imei number, so i cannot match it to the side of the box label to use the two together for a proof of ownership .To enable us to continue with the processing of your claim, we require a valid proof of purchase for the mobile phone you are claiming for.
This must confirm the make, model and IMEI (International Manufacturers Electronic Identity) number of your phone and can be either a letter from your airtime provider on their letter-headed paper, a copy of the original receipt or despatch note that was provided to you when your phone was purchased. (this is not a air time bill)
Thanks a lot,

I bought from Apple online store, and IMEI only appears on sticker on the box which I've peeled off , scanned and emailed. Called apple and they said document doesn't exist with IMEI number on it. I've saw on another post someone managed to get apple to send them receipt with all the info within 3 days so I'll call back tomorrow, just the guy I spoke today didn't think it was possible.
Thanks

I currently have an old work phone that is synced to my iPad. I would like to delete the old work phone number from my iCloud without having to contact my previous employer. Is there a way to do this and replace it with my personal iPhone?

I currently have an old work phone that is synced to my iPad. I would like to delete the old work phone number from my iCloud without having to contact my previous employer. Is there a way to do this from my ipad and replace it with my personal iPhone?

Hi Ktchast,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
Cheers,
- Judy

I have my iphone activated and working since 3days, i purchased it from ebay with 1year warranty, when i check the serial number from Apple store at Bangalore Forum mall, they say that it does not show anything and 'OUT OF WARRANTY'.

I have my iphone4 activated and working since 3days, i purchased it from ebay with 1year warranty, when i check the serial number from Apple store at Bangalore Forum mall, they say that it does not show anything and 'OUT OF WARRANTY'.
Now i have a problem in it, all icons just shake and system hangs, needs restarting.

You need to go back to the person you bought it from. Sounds like they may have sold you phone that is not as described.
Did you check the warranty status before purchasing it?

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

MD04 with PO number from SO

Similar Messages

Maybe you are looking for