Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Similar Messages

  • IPhone remote app no longer working after iPhone update to version 4.2.1

    I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
    I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
    After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
    "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
    Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
    Home sharing is enabled on all the Apple TV devices
    I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
    This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
    I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
    Suggestions ?

    Update:
    Issue is still occuring, after resetting wireless router.
    Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • Headphones no longer work after ios8 update to Iphone 5

    My plug in head phones no longer work after updating to IOS8.  I thought it was the head phones and bought new ones - they don't work either.  I updated my iPad and both head phones work.  Phone is IPhone 5 - not due for an upgrade until December.  Any suggestions?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • Itunes no longer works after latest update

    I updated the latest version of iTunes. Now, it no longer works. Then my computer told me to update the latest version, so tried again, but again it didn' work. So in uninstalled iTunes and tried to install it again. It didn't work. I even tried with an older update after I had deleted the latest one and it didn't work. Now my computer tells me that some file or stuff was missing.
    Thanks for any help!

    ...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
    Please help me!

  • Apple Wireless Bluetooth Keyboard no longer works after OSX update

    After installing the latest OSX update yesterday (something about iChat encryption), Apple Bluetooth Keyboard no longer works with my iMac.
    When I restarted the iMac after installation was completed, the iMac would no longer recognise my Bluetooth Apple wireless keyboard. I've tried with 2 other Apple wireless keyboards as well, but to no avail. None of them work with the iMac any longer. All 3 keyboards work with my PowerMac Quad G5 though.
    The iMac "sees" the keyboards, but the pairing doesn't go through because the iMac doesn't seem to recognise the keystrokes when entering the pairing code.
    I had to go out and buy myself a Microsoft wired keyboard to be able to restart the iMac (couldn't enter the login password without a keyboard).
    My bluetooth mighty mouse works flawlessly though.
    Very frustrating. Can anyone help?
    ...tt
    iMac 24" 2.33GHz 3GB   Mac OS X (10.4.8)  

    And yes I checked the batteries.

  • Standard PCI to PCI bridge no longer working after BIOS update

    Hey everyone,
    Before I get into the details of what is probably the most frustrating computer problem I have ever faced I would first like to say hello because this is my first post and I give you my system specs.
    Windows 7 ultimate x64
    GA-M61PME-S2P (rev 1.0) MOBO
    2x 120GB Mushkin SSD @3.5gbps Raid 0
    AMD Phenom II x4 @2.2 GHZ (Old processor that I replaced)
    AMD Phenom II 1090T x6 @ 3.2GHZ (New processor that replaced the Phenom x4)
    MSI Cyclone GTX 550 TI OC (Nvidia)
    8 Gigs 800mhz DDR2 RAM (Computer Bay)
    I have had a GA-M61PME-S2P (rev 1.0) board for several years now and have never had any problems. I recently bought a brand new AMD phenom II x6 1090T processor because it was listed as being supported by my board. The BIOS version that I had installed before purchasing this processor (version F5) was unable to recognize my new processor and boot so I had to update to the latest version (version F7b). After flashing my BIOS with the new version I was able to boot and my computer recognized my processor with the correct name and clock speeds. Unfortunately it now no longer recognizes one of my standard PCI to PCI bridges. Of the two standard PCI to PCI bridges listed in device manager one of them has a yellow exclamation point and reads "error code 35 firmware does not contain enough info to configure this device". I have tried everything I can think of but just cant seem to get my processor and graphics card to work under the same BIOS version. I will now list every step I have taken;
    1.)  I have re-flashed several times between versions F5 and F7b but always get the same results
    2.)  I have used Driver cleaner in safe mode to wipe all drivers and then double checked programs and features to make sure nothing was still installed.
    3.)  I have installed all drivers for the board from Gigabytes website, although when I try to install the VGA driver i get an error saying that no device could be found that supports the driver.
    4.) I once again wiped everything in safe mode and then found the latest chipset drivers for nvidia Nforce from NVidia's site but got the same results.
    5.) I tried downloading the F7b BIOS from some random website  just in case the file from Gigabyte was somehow broken but this did not change anything. (I know that's generally a bad idea but I am desperate)
    6.) I uninstalled the problem standard PCI to PCI bridge in device manager and restarted my computer but got the same results.
    7.) I tried installing my graphics card drivers from MSI but got an error saying that no supported hardware could be found.
    8.) I tried installing a number of different versions of the Nvidia graphics card drivers for my series but kept getting that same error message
    9.) I downloaded the Graphics card detector program that NVidia provides on their site but it told me that it could not detect my graphics card.
    10.) I tried Flashing my BIOS to the F6 version for the rev 1.3 board but this turned out to be a huge mistake because my computer would no longer post after this and I had to use a FAT32 flash drive and the q-flash utility to bring it back to life.
    11.) I checked over and over and over again that my BIOS settings were right and nothing was setup to only use on-board graphics.
    12.) I tried downloading a driver that was supposedly for the PCI to PCI bridge but im fairly sure this was just a trojan because the install did not complete and I found tons of fun plugins installed afterwards (I reformatted shortly after this).
    13.) I made sure that my new processor was plugged in and that my BIOS was version F7b and then completely wiped my hard drive and re-installed windows 7 ultimate x64 but got the same results.
    14.) I made a bootable DOS flash drive and tried updating my Graphics card BIOS but found that I already have the latest version.
    What I don't understand is that my graphics card works perfectly with BIOS version F5 and my processor works perfectly with BIOS version F7b but under no circumstance do they both work at the same time. It may be worth noting that with version F7b installed I am still able to use my graphics card ( my Monitor is plugged into it via DVI) It just gives me the error under device manager and I can not install any drivers. 
    If anyone out there can help me I will be insanely grateful and will refer to you from then on as the master of all things MSI. I'm at my wits end,  If you need any further info just ask and I will provide.

    Ah ok I was afraid you were going to say that. I will take this to gigabyte then but just so I know, This PCI to PCI bridge problem couldn't have anything to do with my MSI graphics card BIOS somehow not being compatible with the Gigabyte BIOS?
    -Thank you!

  • Mouse gesturing no longer works after recent update ?

    Recently, after an update my magic mouse no longer functions using the swipe gestures...Anyone else with this issue?
    tried to look at in in preferences bt no options there.

    Helpful link from 95bulls.  Here is the Apple link which deals with the more general problems one can have with an unresponding Mouse.   Is the green power light working or blinking?
    You don't say which update or give any details of the OS you use.    Please try to find a moment to update your profile.

  • Send link function no longer works after last update (7.0.1). Has always worked till now. Outlook is set as default email (as before).

    Send link function no longer working since update to 7.0.1. Always worked till now...I use Outlook as default mail client, and have not changed any settings since original setup. This is very frustrating! Any help will be appreciated.

    You can try running the combo updater over your install but you might need to re-install Lion. Both options should not erase your data but if you do the re-install of Lion it's recommended that you backup first as a precaution.
    OS X Lion Update 10.7.5 (Client Combo) 1.91 GB
    http://support.apple.com/kb/DL1582
    To re-install, boot into the Recovery drive and select to Reinstall OS X.
    Hold down Command R when restarting to enter Recovery drive.

  • This Nightly feedback, Steganos password Manager drop and drag functionality no longer works after last update.

    Cut and paste still works but the drop and drag so longer works.
    This for Nightly Beta 64 bit.

    I too have the problem: W7 64 bit. Drag and drop worked until yesterday when I "upgraded" to FF v 26.0 - I can no longer drag passwords etc from my password manager to website fields - a barred circle appears when I try to drag.
    I tried pressing ESC (one profferred solution) and also reset FF to no avail.
    This is more than annoying: some of my passwords are dozens of characters long and there's no way I can access sites by typing them in! I need a solution, even if it's reverting to a previous version.

  • IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

    To Whom It May Concern,
    I recently updated the firmware on my iPhone 4 from 4.1 to 4.2.1. Unfortunately, as soon as I did that my Pioneer (XW-NAV1K-K) Speaker System no longer works with my iPhone. Are there plans on correcting this in the next firmware?

    Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
    NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
    Your or anyones HELP! is greatly appreciated!

  • Western Digital MyBook Studio no longer works after Yosemite update

    A little while ago (Jan 30) I updated Yosemite, and now my Western Digital My Book Studio (using firewire) shows up but no longer works - no Time Machine, or Super Duper back-ups. Does anyone know why this has happened, and what can be done to fix it?

    I should add that the drive works fine with another MBP running OSX 10.6.8. Again, with 10.10.2 it either doesn't work or is incredibly slow.

  • HP OfficeJet 6500A fax no longer works after Mavericks update

    After updating to Mavericks and installing the HP software drivers, the fax component no longer works.  I installed the fax part of the update, and when I print to fax, instead of triggering the machine to dial a number like it did in Mountain Lion, the printer prints out garbage text.  There's no relevant support page on HP's website about this issue.  Anyone got their HP fax to work via print to fax from their Mac?

    Hello Peter,
    It sounds like you are not able to fax from your HP OfficeJet 6500A.  I recommend the following steps for the issue you described:
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    You can find the full article here:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Browser cache ignore no longer works after windows update

    Just thought I'd share that after the windows update I did
    this week, the browser cache blocking trick described in many
    places where you put ?r=<randomnumber> at the end of a URL no
    longer works. Not exactly sure what happened, but it now causes a
    URL not found error, at least for me when I'm loading local files
    off my disk.
    This thread talks about the cache blocking trick:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=665&threadid =1357763&highlight_key=y&keyword1=cache

    Here's a technique I use. In a php file:
    header("Expires: Mon, 20 Jul 1997 05:00:00 GMT");
    header("Cache-Control: no-store, no-cache, must-revalidate");
    header("Cache-Control: post-check=0, pre-check=0", FALSE);
    header("Pragma: no-cache");
    This must be wrapped in php tags.

Maybe you are looking for