MD50 , getting exception "Coverage not provided by Master Plan"
Dear Sir,
We have mate-to-order scenario and MRP run was made using MD50 against a Sale-Order .
After the MRP run , we are getting an exception in MD04 for a Material which is a Bought-out Material . The exception is "Coverage not provided by Master Plan" .
The detail about the Material (X) having exception is as below :
The requirement for the Material X as per BOM is 15 nos . We have 10 numbers quantity for Material X available in own Stock . The Material X has Individual/Collective Indicator set as 2 in MRP view .
After the MRP run under MD04 , for Material X following information appear :
Date MRP Element MRP Element Data Rec./Reqd Qty Available Qty
20.06.2008 Stock 10
24.06.2008 DepReq 1300-100 15- 5-
As a logical for the balance 5 qty , Planned Order of 5 nos qty must be generated . But no Planned Order has been generated . In MD04 view , the Item has exception "Coverage not provided by Master Plan" .
We request , to kindly guide us as what is the reason for the mentioned exception and how to resolve it . Why it has not generated Planned Order for 5 nos qty .
Regards
B Mittal
can you please speicify the what is the MRP type used for materials X, the material for which requirement is not generated in the planning run?
Similar Messages
-
Coverage not provided by master plan - EXCEPTION MESSAGE 40
Dear All,
I am continuously getting the message - Coverage not provided by master plan - EXCEPTION MESSAGE 40 - after MRP run for the materials at 2nd level of BOM and no planned orders are getting created.
I tried in all different ways reffering to different forums, but unable to resolve the issue.
How to overcome this issue.
Regards,
PavanDear Mario,
Thanks for your reply.
Here requirements for production are coming from WBS from Project.
We made changes in the dates in WBS and run MRP, Now system is able to run without any errors.
Regards,
Pavan -
MRP Exception message :- 40- coverage not provided by master plan
HI ,
I have a sales order & i run the MRP & after MRp run , the rpoduction order generate for the componant material , the systemeis nshowing me the exception message 40- coverage not provided by master plan .
I have checked the stockes for the all componant material , there is no stock for the componant material ?
Please help me out in this
PiyushDear,
Please refer OSS notes 550441 question no 06 for Exp message 40 Coverage not provided by master plan.
Exception message '40' resulted from the calculation of the ATP quantity in Transaction MD04.The calculation of this ATP quantity is not provided anymore in Transaction MD04 since it was not an "actual" ATP quantity as in Transaction CO09, but it was calculated according to a separate logic which did not take into account certain relevant parameters.Branching to the ATP quantities now leads to Transaction CO09 which considers all MRP elements, checking rule and scope of check.This instrument should be used now, here the previous exception message '40' is equivalent to a negative, cumulated ATP quantity.In Transaction MD04 exception messages '10' and '30' from the rescheduling check can also be used to determine receipt elements that are not covered.
Regards,
R.Brahmankar -
Coverage not provided by master plan
Hello all,
When I run MD02, planned orders are generated but no purchase requisition is generated. The error is : "Coverage not provided by master plan".
What can I do to sort out this error?
Thanks in advance.Dear,
Please go through the links which will give idea about your issue.
Where as Coverage not provided by master plant is an exception message which details situation as : "Coverage not provided by master plan Excess stock planned based on the "Range of Coverage" profile. Coverage profiles should not be in use. Remove the "Range Of Coverage Profile" from the MRP view of the Material Master and run MRP manually. Contact the HelpDesk for assistance if unable to resolve error".
http://www.sap-img.com/production/mrp-not-creating-purchase-requisition.htm
http://help.sap.com/saphelp_45b/helpdata/en/f4/7d32bb44af11d182b40000e829fbfe/frameset.htm
Regards,
Syed Hussain. -
In 32bit system getting exception "Could not load file or assembly 'SIPEPS, Version=5.0.0.0' "
Hi All,
We are developing a windows service for Lync user state change using UCMA 4.0.
It works fine in 64 bit system but once we run the window service in 32 bit system we are getting the exception as below.
Exception message: Could not load file or assembly 'SIPEPS, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies.
We are referring only “Microsoft.Rtc.Collaboration.dll” but internally this Dll refers SIPES.dll.
Please let us know whether any SIPEPS.dll available for 32 bit system or how we can resolve this issue.
Regards
Saroj SinghIs there anyways by which we can make this working in 32bit system also.
Any Roundabout for this specific SIPEPS.DLL for 32 bit system. -
"Get Risk" button not working inTaskList Safety Plan tab
Hi Experts,
I am implementing Worker Safety Management where I am trying to add Relevant Risks in Safety Plan using button Get Risks, but it does not show any risks to add. I have done required configuration in PM & Risk Management, also I am getting risks in PM order automatically (based on location).
I am trying same thing for task list, Can you suggest what I am missing? Or any other configuration I need to Get the Risks in Task List's Safety Plan
Thanks In Advance
AmolHello Amol
for your requirement , you can use "job hazard Analysis" is a type of risk assessment , in which we will carried our risk analysis for each and every step of process , For example one technician is attending any job like assembling of pump , in this we will carried our Hazard analysis for each and every step involved in the pump assembly. based on the identified hazards we will determine the intial risk levels and determine the existing controlling methods , incase if any lapses are there we will implement new controls with respective worker safety.. and initiate the different notifications for implementing new controls (Maintenance task /Quality task).
Refer below thread for getting overview on Job hazard analysis
Job Hazard Analysis - Risk Assessment (EHS-MGM-RAS) - SAP Library
Balajee -
Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins". -
My mac desktop will not provide sound from internal speakers. When I go to audio devices window it only shows airplay. How can I get internal speakers back.
There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store. -
Index is not getting picked even after providing hint
Hi All
The index pk_sku is not getting picked even after providing the hints when executing the query.Please kindly give me such recommendations.I am providing the information.
select * from
(select /*+ index(s pk_sku) */
to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
t.client_id as CLIENT_ID ,
t.site_id as SITE_ID,
tz.time_zone_name as TIME_ZONE_NAME ,
t.owner_id as OWNER_ID,
t.sku_id as SKU_ID,
t.reason_id as ADJUST_TYPE,
to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
t.reference_id as RECEIPT_ID,
t.batch_id as BATCH_ID,
t.update_qty as UPDATE_QTY,
t.lock_code as LOCK_CODE,
s.description as SKU_DESCRIPTION
from mv_inventory_transaction t
JOIN timezone tz ON tz.site_id = t.site_id ,
mv_sku s
where t.sku_id= s.sku_id
and t.client_id=s.client_id
and ( :client is null or :client = t.client_id)
and ( :site is null or t.site_id in (:site))
and ( :owner is null or t.owner_id in (:owner))
and t.code= 'Adjustment'
and (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and (:sku is null or t.sku_id in (:sku))
UNION ALL
(select /*+ index(s pk_sku) */
to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
t.client_id as CLIENT_ID ,
t.site_id as SITE_ID,
tz.time_zone_name as TIME_ZONE_NAME ,
t.owner_id as OWNER_ID,
t.sku_id as SKU_ID,
t.reason_id as ADJUST_TYPE,
to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
t.reference_id as RECEIPT_ID,
t.batch_id as BATCH_ID,
t.update_qty as UPDATE_QTY,
t.lock_code as LOCK_CODE,
s.description as SKU_DESCRIPTION
from mv_inventory_transaction_arch t
JOIN timezone tz ON tz.site_id = t.site_id,
mv_sku s
where t.sku_id= s.sku_id
and t.client_id=s.client_id
and ( :client is null or :client = t.client_id)
and ( :site is null or t.site_id in (:site))
and ( :owner is null or t.owner_id in (:owner))
and t.code= 'Adjustment'
and (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and (:sku is null or t.sku_id in (:sku))
order by sort_1,2,3,4,5
version = Release 10.1.0.5.0
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.1.0.5
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
sho parameter db_file_multiblock_count_read
sho parameter cursor_sharing
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.1.0.5
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
SQL> sho parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 16
SQL> sho parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACTExplain plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 56 | 29736 | 345K (1)| 01:09:07 |
| 1 | SORT ORDER BY | | 56 | 29736 | 345K (1)| 01:09:07 |
| 2 | VIEW | | 56 | 29736 | 345K (1)| 01:09:07 |
| 3 | UNION-ALL | | | | | |
| 4 | NESTED LOOPS | | 2 | 984 | 29686 (1)| 00:05:57 |
| 5 | HASH JOIN | | 1 | 326 | 26870 (1)| 00:05:23 |
| 6 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 7 | VIEW | MV_INVENTORY_TRANSACTION | 25 | 7600 | 26866 (1)| 00:05:23 |
| 8 | UNION-ALL | | | | | |
| 9 | FILTER | | | | | |
| 10 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 1 | 67 | 24327 (1)| 00:04:52 |
| 11 | INDEX RANGE SCAN | IDX_CODE_CLIENTID_690 | 79681 | | 518 (1)| 00:00:07 |
| 12 | FILTER | | | | | |
| 13 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 24 | 2328 | 2539 (1)| 00:00:31 |
| 14 | INDEX RANGE SCAN | IDX_CODE_646 | 9269 | | 46 (0)| 00:00:01 |
| 15 | VIEW | MV_SKU | 37 | 6142 | 2816 (1)| 00:00:34 |
| 16 | UNION-ALL | | | | | |
| 17 | MAT_VIEW ACCESS FULL | MV_SKU | 335K| 10M| 2535 (1)| 00:00:31 |
| 18 | MAT_VIEW ACCESS FULL | MV_SKU | 37839 | 1699K| 280 (1)| 00:00:04 |
| 19 | NESTED LOOPS | | 54 | 26568 | 315K (1)| 01:03:10 |
| 20 | HASH JOIN | | 1 | 326 | 313K (1)| 01:02:37 |
| 21 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 22 | VIEW | MV_INVENTORY_TRANSACTION_ARCH | 576 | 171K| 313K (1)| 01:02:37 |
| 23 | UNION-ALL | | | | | |
| 24 | FILTER | | | | | |
| 25 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 1 | 72 | 19258 (1)| 00:03:52 |
| 26 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 36016 | | 287 (1)| 00:00:04 |
| 27 | FILTER | | | | | |
| 28 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 575 | 55200 | 293K (1)| 00:58:45 |
| 29 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 367K| | 3466 (1)| 00:00:42 |
| 30 | VIEW | MV_SKU | 37 | 6142 | 2816 (1)| 00:00:34 |
| 31 | UNION-ALL | | | | | |
| 32 | MAT_VIEW ACCESS FULL | MV_SKU | 335K| 10M| 2535 (1)| 00:00:31 |
| 33 | MAT_VIEW ACCESS FULL | MV_SKU | 37839 | 1699K| 280 (1)| 00:00:04 |
------------------------------------------------------------------------------------------------------------------------when put in sql tuning advisor,It recommended with better plan using indexes
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 56 | 29736 | 340K (1)| 01:08:01 |
| 1 | SORT ORDER BY | | 56 | 29736 | 340K (1)| 01:08:01 |
| 2 | VIEW | | 56 | 29736 | 340K (1)| 01:08:01 |
| 3 | UNION-ALL | | | | | |
| 4 | NESTED LOOPS | | 2 | 848 | 26900 (1)| 00:05:23 |
| 5 | HASH JOIN | | 1 | 326 | 26898 (1)| 00:05:23 |
| 6 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 7 | VIEW | MV_INVENTORY_TRANSACTION | 25 | 7600 | 26894 (1)| 00:05:23 |
| 8 | UNION-ALL | | | | | |
| 9 | FILTER | | | | | |
| 10 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 1 | 67 | 24352 (1)| 00:04:53 |
| 11 | INDEX RANGE SCAN | IDX_CODE_CLIENTID_690 | 79681 | | 518 (1)| 00:00:07 |
| 12 | FILTER | | | | | |
| 13 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 24 | 2328 | 2542 (1)| 00:00:31 |
| 14 | INDEX RANGE SCAN | IDX_CODE_646 | 9269 | | 46 (0)| 00:00:01 |
| 15 | VIEW | MV_SKU | 37 | 3626 | 2 (0)| 00:00:01 |
| 16 | UNION-ALL PARTITION | | | | | |
| 17 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 34 | 3 (0)| 00:00:01 |
| 18 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 2 (0)| 00:00:01 |
| 19 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 46 | 2 (0)| 00:00:01 |
| 20 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 1 (0)| 00:00:01 |
| 21 | NESTED LOOPS | | 54 | 22896 | 313K (1)| 01:02:38 |
| 22 | HASH JOIN | | 1 | 326 | 313K (1)| 01:02:38 |
| 23 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 24 | VIEW | MV_INVENTORY_TRANSACTION_ARCH | 576 | 171K| 313K (1)| 01:02:38 |
| 25 | UNION-ALL | | | | | |
| 26 | FILTER | | | | | |
| 27 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 1 | 72 | 19269 (1)| 00:03:52 |
| 28 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 36016 | | 287 (1)| 00:00:04 |
| 29 | FILTER | | | | | |
| 30 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 575 | 55200 | 293K (1)| 00:58:47 |
| 31 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 367K| | 3466 (1)| 00:00:42 |
| 32 | VIEW | MV_SKU | 37 | 3626 | 2 (0)| 00:00:01 |
| 33 | UNION-ALL PARTITION | | | | | |
| 34 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 34 | 3 (0)| 00:00:01 |
| 35 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 2 (0)| 00:00:01 |
| 36 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 46 | 2 (0)| 00:00:01 |
| 37 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 1 (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------------------So ,after checking the recommended plan I tried to execute the query with the hints,even then it is picking up the indexes in the explain plan.So please kindly help in solving the issue
The pk_sku is the index created on client_id and sku_id columns
Thanks
GVriedelme wrote:
My experience is differernt - hints will be followed if the optimizer determines they will be beneficial and not if they will not, including my current project on 11gR2. The example below (unfortunately only 11gR1) disproves your theory, showing the index hint is followed and that the cost increases by a factor of five.
The most common cases of the optimizer apparently ignoring a hint are due to operator error, the hint is not well formed, or cannot be followed. There are a couple of documented cases where a hint will be ignored - first_rows used in CTAS is one.
Jonathan Lewis writes a lot about it on his blog showing that the optimizer always acts on a well formed hint if it is at all possible.
SQL> create table t (n number not null, c varchar2(1000));
Table created.
SQL> insert into t select 1, rpad('x',1000,'x')
2 from dual connect by level <= 50000;
50000 rows created.
SQL> create index t_ix on t (n);
Index created.
SQL> exec dbms_stats.gather_table_stats(user, 't', cascade => true)
PL/SQL procedure successfully completed.
SQL> explain plan for
2 select max(c) from t where n =1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 2966233522
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1004 | 1574 (1)| 00:00:19 |
| 1 | SORT AGGREGATE | | 1 | 1004 | | |
|* 2 | TABLE ACCESS FULL| T | 50000 | 47M| 1574 (1)| 00:00:19 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
2 - filter("N"=1)
14 rows selected.
SQL> explain plan for
2 select /*+ index (t t_ix) */ max(c) from t where n = 1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3231292748
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1004 | 7244 (1)| 00:01:27 |
| 1 | SORT AGGREGATE | | 1 | 1004 | | |
| 2 | TABLE ACCESS BY INDEX ROWID| T | 50000 | 47M| 7244 (1)| 00:01:27 |
|* 3 | INDEX RANGE SCAN | T_IX | 50000 | | 98 (0)| 00:00:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
3 - access("N"=1)
15 rows selected. -
How to get rid this Warning=Sales order (SOBKZ = ) is not provided for this
Dear Concerns
In MB1C, Mov Type=521E, and the batch no=A.
After entering all the required entries the systen gives me the warning and the system save the transaction after pushing the enter button five to six times.
Sales order (SOBKZ = ) is not provided for this goods movement.
I want to get rid of this warning .
So that the system could save the transaction in one click.
Regards:VijayHi
Can u please tell me the solution of that issue as in my case the item has to be received
and reserved against the sales order.
can i make my sales order item cate mark with the special stock indicator and
does it help to solve my problem
Yes this will only solve the problem. You need to mark your sales order item cate with special stock indicator E
Then PGI will be smooth otherwise you can expect problem
This reply is for the other friend
In-IMGMaterials ManagementInventory Management and Physical Inventory---Define Attributes of System MessagesSettings for System Messages----
Here in the new entries add message M7---374 with version as 00 and make that as error message and save it
Regards
Raja -
Java.lang.Exception: Could not get name for DC project
Hello Experts,
We have a code which is downloaded from SVN repository.
I have imported the code from my desktop into NWDS and when I try to deploy it throws,
java.lang.Exception: Could not get name for DC project
I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
Kindly help me on how to fix the error.
Thanks, SwarnaprakashDear Swarnaprakash,
The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
the related package for DC is missing once check it after try to import.
Depending on which Java compiler preferences are set, you may see some
warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
Thanks & Regards,
Durga Rao. -
Why does Verizon not provide 3G coverage in Western Maryland (Garrett County) and why does it not have an agreement with US Cellular for such coverage?
Thanks for the zip code pfekete. I looked into the coverage in your area and I do see you are in an extended 1X data coverage which explains why you're not connecting to 3G. What phone do you have? We may be able to advise you on how to adjust the settings so it picks up the strongest signal. I apologize for the inconvenience.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
Exception message, failed to get value, could not load managed metadata, invalid field name
Hi, i have created some site collection columns with managed metdata and taxonomy term sets. I have then created some site content types of those site columns. Some of them function properly and some don't.
When i have created or uploaded a document to the document library i start to "tag" the document by first choosing witch conent type i want too use, but when it comes to save the document it renders an error message(its not the full content
of the message):
"exception message, failed to get value, could not load managed metadata, invalid field name"
I have created some other site content types before and with the same site columns and they do not generate a error message. Is there a solution for my dilemma?try these links:
https://prashobjp.wordpress.com/2014/02/14/failed-to-get-value-of-the-column-name-column-from-the-managed-metadata-field-type-control-see-details-in-log-exception-message-invalid-field-name-guid-site-url/
http://www.sharepointconfig.com/2011/03/issues-provisioning-sharepoint-2010-managed-metadata-fields/
http://blog.goobol.com/category/sharepoint/sharepoint-issue-troubleshooting/
http://www.instantquick.com/index.php/correctly-provisioning-managed-metadata-columns?c=elumenotion-blog-archive/random-whatnot
https://pholpar.wordpress.com/2010/03/03/taxonomy-issues/
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing -
New ipod touch 32gb. Can access iTune store.Can sample music selection. Completed latest update for ipod Can't make any purchases. Get error "could not complete your iTunes store request. An unknown error occured (-1202)". security SSL 3.0 & TSL 1.0 OK. Firewall enabled for iTunes. ???
laneymenion wrote:
Using Proxy: Yes
HTTP Proxy: 192.168.100.15:80
Change the Using Proxy to No
Have you allowed itunes and itunes helper in your security software firewall? -
Remote faxing error - A fax number was not provided.
I have a USRobotics 5637 Fax / Modem attached to a Mac Mini. I can send and receive faxes on the Mini.
I have enabled printer sharing on the Mini. User rights are everyone is allowed to print. When I try to print to the shared fax from my MacBook Air, The Mini does not send the fax. CUPS provides this error:
USB_Modem-153
Unknown
Withheld
18k
Unknown
completed at
Mon Aug 12 16:36:37 2013
"A fax number was not provided."
So the MacBook Air sees the Fax on the Mini and the job gets sent to the Mini but the fax number apparently does not get sent to the print server. Both machines are running 10.8.4 and are connected to the same (hardwired) network.
Is there something I am missing. I type the fax number in on the Air and I have tried various formats (xxx-xxxx, (xxx) xxx-xxxx, xxxxxxx etc) just to see if this makes a difference but no luck.
I have attached the CUPS log file below: There is the USR fax/modem as well as a Brother MFC printer configured.
Any suggestions?
Thank you
D [12/Aug/2013:16:59:29 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:56 -0300] Report: clients=1
D [12/Aug/2013:16:59:56 -0300] Report: jobs=147
D [12/Aug/2013:16:59:56 -0300] Report: jobs-active=0
D [12/Aug/2013:16:59:56 -0300] Report: printers=2
D [12/Aug/2013:16:59:56 -0300] Report: stringpool-string-count=4968
D [12/Aug/2013:16:59:56 -0300] Report: stringpool-alloc-bytes=10648
D [12/Aug/2013:16:59:56 -0300] Report: stringpool-total-bytes=67184
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Printer-Attributes 1
D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Validate-Job 2
D [12/Aug/2013:16:59:56 -0300] Validate-Job ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Validate-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Create-Job 3
D [12/Aug/2013:16:59:56 -0300] Create-Job ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] add_job: requesting-user-name="ufa"
D [12/Aug/2013:16:59:56 -0300] Adding default job-sheets values "none,none"...
I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding start banner page "none".
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-created event...
I [12/Aug/2013:16:59:56 -0300] [Job 154] Queued on "USB_Modem" by "ufa".
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Create-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Printer-Attributes 4
D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 23] Accepted from localhost (Domain)
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 23] POST / HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 23] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Send-Document 5
D [12/Aug/2013:16:59:56 -0300] [Client 23] 2.0 Get-Jobs 30
D [12/Aug/2013:16:59:56 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] Send-Document ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] cupsdIsAuthorized: requesting-user-name="ufa"
D [12/Aug/2013:16:59:56 -0300] [Job 154] Auto-typing file...
D [12/Aug/2013:16:59:56 -0300] [Job 154] Request file type is image/tiff.
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Aug/2013:16:59:56 -0300] [Job 154] File of type image/tiff queued by "ufa".
I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding end banner page "none".
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-processing=1376337596
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] Asserting dark wake.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
D [12/Aug/2013:16:59:56 -0300] [Job 154] job-sheets=none,none
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[0]="USB_Modem"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[1]="154"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[2]="ufa"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[3]="untitled text 6"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[4]="1"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[5]="job-uuid=urn:uuid:f1a61d10-1959-3fc1-7248-88abadd7e431 job-originating-host-name=192.168.1.20 time-at-creation=1376337596 time-at-processing=1376337596"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[6]="/private/var/spool/cups/d00154-001"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[0]="<CFProcessPath>"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[9]="HOME=/private/var/spool/cups/tmp"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[11]="[email protected]"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[12]="SOFTWARE=CUPS/1.6.2"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[14]="USER=root"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[15]="CUPS_MAX_MESSAGE=2047"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[18]="IPP_PORT=631"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[19]="CHARSET=utf-8"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[20]="LANG=en_US.UTF-8"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[21]="APPLE_LANGUAGE=en-US"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[22]="PPD=/private/etc/cups/ppd/USB_Modem.ppd"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[23]="RIP_MAX_CACHE=128m"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[24]="CONTENT_TYPE=image/tiff"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[25]="DEVICE_URI=fax://dev/cu.usbmodem0000001"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[26]="PRINTER_INFO=FAX"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[27]="PRINTER_LOCATION=mini"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[28]="PRINTER=USB_Modem"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[29]="PRINTER_STATE_REASONS=none"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[30]="CUPS_FILETYPE=document"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[31]="FINAL_CONTENT_TYPE=printer/USB_Modem"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[32]="AUTH_I****"
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgimagetopdf (PID 51019)
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 51020)
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/rastertotiff (PID 51021)
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started backend /usr/libexec/cups/backend/fax (PID 51022)
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-state-changed event...
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Send-Document (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Job-Attributes 6
D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:56 -0300] [Client 21] Closing connection.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:56 -0300] [Client 22] Closing connection.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Job-Attributes 7
D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: copying to temp print file "/private/var/spool/cups/tmp/0c74c52155d4d"
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - document title: "untitled text 6"
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - filename: "/private/var/spool/cups/d00154-001"...
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - dpi: (204, 196), orientation = 1...
E [12/Aug/2013:16:59:56 -0300] [Job 154] A fax number was not provided.
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Job 154] Set job-printer-state-message to "A fax number was not provided.", current level=ERROR
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-progress event...
D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51022 (/usr/libexec/cups/backend/fax) exited with no errors.
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51019 (/usr/libexec/cups/filter/cgimagetopdf) exited with no errors.
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: “/private/var/spool/cups/tmp/0c74c52155d4d” has 1 pages.
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: size->width = 612, size->length = 792, size->top = 773.4, size->bottom = 18.6, size->left = 16.6, size->right = 595.4
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: PreferredRotation = 90
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: colorspace = 3, bitsPerColor = 1
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: band width = 1640, bytesPerRow = 1640, band height = 2055, height = 2055
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: context width = 1640, height = 2055, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 1640, bitmapInfo = 0, resolution = (204.000000, 196.000000)
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: bytes written for side 1 = 421275
D [12/Aug/2013:16:59:56 -0300] [Job 154] rastertotiff read page 1 (421275 bytes)
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51020 (/usr/libexec/cups/filter/cgpdftoraster) exited with no errors.
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51021 (/usr/libexec/cups/filter/rastertotiff) did not catch or ignore signal 13.
D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-completed=1376337596
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-completed event...
I [12/Aug/2013:16:59:56 -0300] [Job 154] Job completed.
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
D [12/Aug/2013:16:59:57 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:57 -0300] [Job 154] Unloading...
D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:57 -0300] Releasing dark wake assertion.
D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] Accepted from localhost (Domain)
D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Job-Attributes 9
D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] [Job 154] Loading attributes...
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 30
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Printer-Attributes 31
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Printer-Attributes 8
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 31
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Printer-Attributes 10
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Job-Attributes 11
D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 32
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Jobs 32
D [12/Aug/2013:16:59:57 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:57 -0300] [Client 22] Closing connection.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Aug/2013:17:00:00 -0300] [Client 21] Accepted from localhost:631 (IPv6)
D [12/Aug/2013:17:00:00 -0300] [Client 21] GET /admin/log/error_log? HTTP/1.1
D [12/Aug/2013:17:00:00 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Aug/2013:17:00:00 -0300] [Client 21] Authorized as Xxx using BasicNow all are running 10.9.2. Same problem, except that two of the 10.9.2 clients have this problem. (They may both have had this problem with 10.9.1, but it wasn't noticed until now.)
I have reset the printing system on the serving Mac, added the fax back in, and still have the problem.
I also reset the printing system on one of the problem clients, tried a different user, and still have the problem.
I also verified that the fax.ppd files are identical on working and non-working clients. They are.
This is really, really frustrating.
Maybe you are looking for
-
Hi, I am only a designer, not a programmer so the script is a mystery for me. I need the code to stop at a frame (the old release on etc) and the button code to navigate to a certain frame (the old go to frame). All in script 3 please. I need time to
-
I have searched this forum and others looking for help. Got close but not there yet! My 30GB will no longer play video on the TV. TV shows, movies, podcasts all play on the Ipod, but no longer on the TV. In the past I successfully used a camcorder co
-
CS3 PNG reading/writing failing on very large network volumes
We are experiencing an issue with the built-in PNG file format plugin, that is consistent across multiple versions of OS X on fully-patched CS3 Design Premium. I'm hoping to hear that others have seem something similar. We recently deployed a 1.8TB n
-
HT1218 Updating 1st generation Airport extreme
While using the Airport Utility to try and update my Airport Extreme, the following message appears: "An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error 10057 As far as
-
NW04s (BI) JAVA Add-in for ABAP fails at step CONFIGURE EP
Hi All We recently upgraded our NW04 BI 3.5 to NW04s BI 7.0 AS ABAP. We are now in the process of installing AS JAVA and UT BI JAVA, EP. Our platform is Unix (AIX) and database Oracle. JAVA add-in is failing at the step "Configure Enterprise Porta