Md61 requirements for inactive still included in MRP run

how can i plan for PIRs in such a way that in normal MRP run, requirements are not generated? i use MS01 for planning for simulative planned orders. yet however, there is a parallel mrp run for the plant, and these PIRs get captured by the normal mrp run. i have inputed in the PIR using the inactive version (the one not assigned in the planning scenario)

Hi,
First of all set your user parameter (MD61), if there check box for Active version is tick then by default your PIR gets activate or you have to manual remove tick during PIR creation.
So it is better that pls if that tick is active in User Parameter than remove and save your user parameter.
Regards,
Dhaval

Similar Messages

Process order required for each sales order without mrp run

Hi, it is mto scenario. wants system to create a process order for each sales order without running mrp. please advise is it possible? if possible please guide what settings need to be done. Thabk you.

HI
You can create production order with reference to sales order using t code CO08.
Check and revert
Regards
Anupam Sharma

Cannot install iTunes 10.7 on Windows 7. Getting "a program required for this install could not be run"--Apple Software Update is not installed, so updating it is not a possible solution.

I was following the process of unistalling all Apple software and reinstalling iTunes. But I am getting an error that says "a program required for this install could not be run."
Other threads recommend updating the Apple Software Update module, but that was uninstalled. So if it's part of the problem, updating it is not a solution.
Windows 7, 64-bit, SP 1 installed.

For what it's worth, at the point the installation fails, Bonjour, Apple Application Support, and Apple Mobile Device Support all show as installed on Control Panel. Apple Software Update has a link on the Start Menu but does NOT show as installed on Control Panel. Is there a way to install this separately from iTunes?

HT1926 Have you gotten the error "a program required for this install could not be run"

Whenever I try to install iTunes on my Windows 7 PC, I get the error" a program required for this install could not be run". Any ideas?

Burwood, that tip says to repair the Apple Software Update module. I went through the process of uninstalling all Apple programs from my computer first, so that's not the problem (and it's not installed, so it can't be repaired).
I tried installing iTunes with the "automatically update" box unchecked as well, to no avail. Any ideas?

The software required for iPhone is not installed. Run the iTunes installer

I install and reinstall itunes many times following the "Support instructions" but nothing solve my problem.
At the end of each re-instalation, when i start itunes i get this message "The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again".
The driver USBAAPL.SYS, and the Apple Mobile Device Support is never installed.
Please HELP!
Thanks.

jaffy,
iTunes is not supported on 64-bit versions of Microsoft Windows Vista or XP. As is stated in this kbase article:
http://docs.info.apple.com/article.html?artnum=301301
To quote the article:
"iTunes is currently not supported in Windows XP Professional x64 Edition or any 64-bit edition of Windows Vista. Features may or may not work correctly."
Nathan C.

I downloaded itunes but when i try to install i get an error saying "There is a problem with this windows installer package. a programe required for this install could not be run" can anyone help?

I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

A Program Required for this Install Could Not Be run.

This is the error I receive when trying to install iTunes. I have had permission problems with VISTA in the past, so this may be related. Here is what I have tried
I have completely uninstalled all iTunes related stuff, including using the Installer Cleanup. I initially had trouble deleteing some things because of some permission errors. I managed to fix this by creating a bat file to 'take ownership' of folders. I have been working on this for aaages!!
If anyone could help me, it would be greatly appreciated!
Sincerely,
Martin.

I have made some progress. I extracted the executable itunes setup into its components and found that the apple software update was giving me the error. I found which folder it wanted to install into, gave myself every permission for that folder, and successfully installed the software update. now when i try and install itunes (though either the executable or iTunes.msi) it goes through the process WAY too fast, and it the end it says installtion complete.
But it hasnt actually installed anything. No desktop icons, the itunes program folder remains empty. Its doing... nothing at all.
Ideas?

How do i prevent mozilla from displaying "authentification required" for every page? I am running windows xp on a windows server 2003 network

it only happens once when I use the browser for the first time after logging in with the administrator account

I have heard of this situation before, but, like most Apple Mail problems, it is a problem on the recipient's side. There should be no reason that a recipient can't save an inline image from an e-mail message. For years, Apple has bent over backwards to construct messages that PC clients will be able to view. Obviously there are limits as to what they will do.
If you want to follow the standard procedure and hack up your e-mail for the benefit of others who refuse to upgrade, you can try Attachment Tamer. You could also try Microsoft Outlook. This won't change the underlying problem. It will just make it Microsoft's problem to deal with.

'There is a problem with this windows installer package. A program required for this install could not be run' - What would this be?? Trying to download itunes on windows 7

This comes up everytime i try and install itunes. I think i may have accidently uninstalled something i shouldn't have when having a clear out but what?!
I have windows 7.
Thanks

Repair your Apple software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All programs, go to control panel/Programs n features/highlight ASU and click REPAIR

"Generic" material master in MRP run

Hi
Our business users want to use MRP to manage the stock of materials such as circuit breakers. There are however many manufacturers/types and while a certain specification is required, they would be happy to purchase from a variety of suppliers whose products could be different from one another.
Would it be possible to use MRP to do this, and how could that be achieved?
The process envisaged would be something like this:
Material number xxxxx with MRP settings defined; stock falls beyond prescribed level.
System must generate requisition indicating requirement for circuit breaker in general
Procurement must get quotations from variety of suppliers (as per tender and procurement policy) based on minimum specification.
Quotations received must be evaluated and based on price/quality, the supplier selected and order placed.
Item must be received against specific material number yyyyy for that supplier's circuit breaker.
Any suggestions much appreciated.
thanks and regards, Lara

you can only receive an item which is specified in the purchase order.
if the purchase order has XXXX then you cannot receive YYYY, you have to receive XXXX and then either use a 309 movement to get it to YYYY, or even better using a production order to make YYYY from XXXX.
Further if you plan XXXX and procure YYYY, then this order does not reduce the requirement for XXXX, and the next MRP run will give you again a requisition for XXXX.

'Releasestepcreated' not getting triggered for PR generated through MRP run

Hi,
I have PR Release strategy workflow configured, working well when i try to create PR manually, triggers workflow.
PR's created thorugh MRP run, triggers release strategy but not workflow.
I checked the event trace 'releasestepcreated' event not triggered through MRP run.
Please respond ASAP.
Your inputs will be highly appreciated.

Short Text
Workflow with multiple workitems
Long Text
Refering SAP notes that i came to know that workflow is not supported
through MRP run (md03/md04).we are not using Planned orders.
To trigger workflow for Purchase requisitions created by MRP run, we
have developed a custom report to trigger workflow explicitly.
1.MRP batch job runs every night. After MRP job,planned to schedule
another job to trigger workflow for PR's created MRP run.
2. Used FM 'SAP_WAPI_CREATE_EVENT' to trigger workflow.
3. PR requires 5 levels of approvals based on release strategy
configuration.
4. The issue is PR 'XXX' created and waiting for approval in agent's
inbox.When 2nd day MPR runs same PR 'XXX' effected, another
workitem for the same PR in agent's inbox.
We have multiple workitems for the same PR in agent's Inbox.
If i execute one of the workitem,releases PR, multiple workitems are
getting generated for 2nd level approval for the same PR.
Please give your inputs to resolve this issue.

Hardware requirements for FMS

Hello,
I work on a project where FMS will be used as the main streaming server. We are going to use p2p/multicast technology which is available in FMS. My first question is : What are the approximate hardware requirements for such a server ? REMARK : this server will be connected to a switch with 1G/bits ports
If we use p2p/multicast technology the maximal number of users which the system can handle is (theoretically)unlimited, is this right ? or I miss something ?
Thank you

Hi,
Thanks for your interest in FMS and multicast.
The generic system requirements for FMS (which includes multicast) is given @ http://www.adobe.com/products/flashmediainteractive/systemreqs/
And @ http://kb2.adobe.com/cps/869/cpsid_86913.html
Yes, as you mentioned, the maximum limit of users in unlimited for p2p, technically.

SO created for ROH. Output of MRP

Hi...
Sales order created for an ROH item, with MRP type as "PD" ,Procurement type value as "F". If we run MRP for all materials in plant, what will be the output? only generate purchase requisition? what is the procedure?
Thanks

Dear Rajasekaran,
Any procurement proposal recieved for a sales order can be made use of only for the specific sales order and not for another
requirement.
In you case (I'm not sure why you have created a sales order for a raw material) after MRP run,the system creates PR for the
raw material wherein the sales order will be linked.(assuming if the requirement type is KE)
Check and revert back.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Feb 16, 2012 1:20 PM

Minimum Hardware Requirement for SAP Business One For HANA

Hello EveryOne,
I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
Is it can install on laptop or I need to buy giant server.
Thanks in advance

Hi Idrees,
Check following links:
http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
Hope it helps.
Thanks & Regards
Ankit Chauhan

Iops requirement for RDS farm on windows 2k12

Hi,
I'M working on the project to create a TS Farm with server 2012 and I want to know the minimal requirement for the IOPS. I will run my setting with a SAN configured with 8 x 600 Gb (10k rpm) in RAID 6 but I want to be sure the IOPS it's ok.
I just fund some partial information of a white paper for TS on winodws 2k8 and nothing talking about the IOPS.
If somebody can illumine me,
Thanks,

Hi,
This forum is for the specific product Virtual Server 2005.
You're better off posting in a more appropriate forum like the Windows Server or Terminal Services forums.

Md61 requirements for inactive still included in MRP run

Similar Messages

Maybe you are looking for