MDB not responding after Oracle AQ restart

Ive created a Message Driven Bean, which Ive deployed to a OC4J container listening to a point to point Oracle AQ.
The bean works as expected until I stop and then start the database AQ (i.e. disable enqueue and dequeue via the management console or PL/SQL). Once the queue has been restarted the bean no longer receives any messages from the AQs. If I subsequently restart the container the MDB starts to process the messages from the queue.
I have deployed this application using two environments (Windows 2000) and Sun Solaris 64 [both running version 10g 9.0.4 of the OC4J container and a 9.2.0.4 database) ] however the application behaves exactly the same on either platform.
Is this the correct container/database behaviour or is this a bug.

I seem to able to get to it. FYI, I culled this from that doc:
These parameters are attributes of the <message-driven-deployment> element, as shown in the following example:
<message-driven-deployment name="MessageBeanTpc"
connection-factory-location=
"java:comp/resource/cartojms1/TopicConnectionFactories/aqTcf"
destination-location=
"java:comp/resource/cartojms1/Topics/topic1"
subscription-name="MDBSUB"
dequeue-retry-count=3
dequeue-retry-interval=90/>

Similar Messages

The ipon is off and not respond after i make restart

plz help me guys i make restore like in the support (hold off/on menu+middle button) and now my ipod is black screen and not respond ... what i need 2 do ??
ty

That's not a restore, that's a reset which is something different.
Try a restore.
See: How to restore the iPod to factory settings.

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

ITunes not responding after system restart

iTunes application not responding after restarting OS X on MacBook Pro Late 2010 Model. The problem first appeared in iTunes 11 on my OS X Mavericks & is persistent in iTunes 12 on OS X Yosemite every single time i restart i need to force quit & reopen iTunes. Any suggestions will be much appreciated.Mid

I have the same problem...downloaded latest iPod update, now icon hasn't returned to Itunes and nano is in what seems like permanent "Do Not Disconnect."
This has been going on for hours...can't be normal, right?
Solutions?
Vaio Windows XP

App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
Also I tried to reboot and restart and nothing happens still unresponsive.
Tried to click as many times as I can the App Store and it won't open.
Please Help.

Dongski
I had the same problem and solved it myself.
Please see discussion https://discussions.apple.com/message/23556072#23556072
Hope it helps

BC4j/JSP Application not responding after some time - when deployed on 9ias

Hi,
We are using BC4j/jsp application on 9ias. The application is not responding
after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
with 10 users, and server is not responding to BC4J/JSP application.
However the server could able to publish the JSP pages with standerad JDBC code even after that.
many many thanks in advance
null

When the application deployed by BC4J/JSP not responding, does the sample JSP application still works? i.e. does any other application respond? Does 1 user respond? Is the database source (JDBC), running Oracle 8.1.7? What is the platform running the database (e.g. local NT database)?

HT1430 my iphone 5 is not responding after the installation of ios7 ?

MY IPHONE 5 IS NOT RESPONDING AFTER INSTALLING IOS7 TODAY. NOT EVEN
ABLE TO POWER OFF.
Is there anybody to help me?

Perhaps if YOU STOP SHOUTING someone will help you.
What have you done to troubleshoot thus far? Have you taken the steps recommended in the User Guide (restart, reset, restore from backup, restore as new)

Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Premiere Pro CS6 not responding after adding anything to timeline

I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything. I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding. It's frustrating because the program used to work fine before.
The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks. I have a late 2008 MacBook Pro.
Thanks in advance for the help.

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Garageband not responding after upgrade to MacOS 10.5.8

Garageband is not responding after an upgrade from Mac 10.4 to 10.5.8. how can I fix this

Hello,
Do you have some Sound amplifying App installed?
If so remove it & reboot.

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

BC4j/JSP Application not responding after some time - when deployed on 9ias BC4j/JSP

Hi,
We are using BC4j/jsp application on 9ias. The application is not responding
after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
with 10 users, and server is not responding to BC4J/JSP application.
However the server could able to publish the JSP pages with standerad JDBC code even after that.
Please....help us.........
many many thanks in advance

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Is there any mechanism that cleans up these connections (back down to the initial or some other minimum I would guess) or do they hang around until either the app server or database shuts down?<HR></BLOCKQUOTE>
There is currently no mechanism for reducing the connection pool size after a period of high activity. Recently this has been frequently requested and as such will be implemented in the next production release.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>We have verified this in manual testing. However, when the load tool script exits it doesn't seem to release resources. We know this because we keep seeing our database connections go up and up as more tests are run. Further, we also seem to see more than one connection per "virtual user". For example, when I connect 5 users to the app in manual testing, I get 5 connections. But, when we run a test using the tool, we get 395 database sessions for 200 users. We are having a bit of difficulty understanding why the behavior is different.<HR></BLOCKQUOTE>
Assuming that the you are performing your manual testing against the same instance of the application on which you are performing your load testing, I would assume that the connections are being released to the pool at the end of the request. One possible reason for the approximate 2:1 ratio between connections and virtual users may be BC4J's use of internal connections. What version of BC4J are you using?
BC4J requires an internal connection to support state management and spill to disk. The internal connections are pooled with the transaction connection and only held for the duration of the persistence operation. However, if the web server is very busy then a large number of synchronous persistence requests may be received which would explain the eventual 2:1 ratio in the pool's high water mark.
If the user start times and think times are staggered in order to reduce the incidence of synchronous persistence requests does the ratio of connections to web sessions stabilize at some lower number (i.e. 1.5:1)

MDB not responding after Oracle AQ restart

Similar Messages

Maybe you are looking for