MDBT with planning date in Past "01.01.2010".
Hi Guru,
I need some help.
Scenario: We made one variant in MDBT with planning date in Past "01.01.2010". But I could not Analise the effect of same.
Can any one share what is the effect of planning date in Past.
Thanx & Regd
PNU
Hi,
creation of varient in the past date will not have any effect. All that effects is scheduling the varient.
Correct me if i ma wrong.
Thanku
krishna
Similar Messages
-
Order confirmation with delivery date in past
Hello everybody,
In the SNC portal, we have a lot of old Purchase order which are not confirmed, and when we try to confirmed them, we have the error below :
Order XXXXXXXX, item 00010, schd. line 0000000002: delivery date lies in past
My client wish create a super user (admin ?) who can confirmed a Purchase Order item with a delivery date in past (for example 06/08/2011).
Is it possible to create such profiles? If so how to configure it in SNC.
Are there other solutions ?
Thank you very much for your help.
Stéphane.Hi Stéphane,
Normally in a standard SAP settings Purchase order confirmation in past gives warning message but you can have PO confirmation in past from warning to error or Information.
Go to SPRO>Supply Network Collaboration>Basic Settings>Validation>Own Settings-->Maintain Settings in Validation Profiles
Maintained below setting if you want message as information (No error or warning message)
Profile:POC2
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:I
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Profile:POC3
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:I
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Maintained below setting if you want message as error
Profile:POC2
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:E
Save Mode:DO not Save Message
Continuation Mode:Discontinue checks
Profile:POC3
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:E
Save Mode:DO not Save Message
Continuation Mode:Discontinue checks
Maintained below setting if you want message as warning
Profile:POC2
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:W
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Profile:POC3
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:W
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Above setting is a generic setting for all user and If you need User specific setting then it is a customization required.
Regards,
Nikhil -
Performance issues with Planning data load & Agg in 11.1.2.3.500
We recently upgraded from 11.1.1.3 to 11.1.2.3. Post upgrade we face performance issues with one of our Planning job (eg: Job E). It takes 3x the time to complete in our new environment (11.1.2.3) when compared to the old one (11.1.1.3). This job loads then actual data and does the aggregation. The pattern which we noticed is , if we run a restructure on the application and execute this job immediately it gets completed as the same time as 11.1.1.3. However, in current production (11.1.1.3) the job runs in the following sequence Job A->Job B-> Job C->Job D->Job E and it completes on time, but if we do the same test in 11.1.2.3 in the above sequence it take 3x the time . We dont have a window to restructure the application to before running Job E every time in Prod. Specs of the new Env is much higher than the old one.
We have Essbase clustering (MS active/passive) in the new environment and the files are stored in the SAN drive. Could this be because of this? has any one faced performance issues in the clustered environment?Do you have exactly same Essbase config settings and calculations performing AGG ? . Remember something very small like UPDATECALC ON/OFF can make a BIG difference in timing..
-
Error during the save process with Planning data form
Hi,
When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.Hi,
I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hyperion Performance Scorecard automatic Synch with Planning data
Hello all,
I was wondering if anyone knows how and if it is possible to automate the Data and Metadata Synchronization between Performance Scorecard and a Planning?
I have successfully set up the Planning database as an External data source but need to automate the synch process, as opposed to having an administrator manually click the buttons at set periods.
I'm guessing the automation will involve calling the relevant class from command line, but I don't know which one and what parameters to pass...perhaps there is even an easier way (let's hope!).
Can someone please give me any advise or information on how this can be achieved?
thanks in advance
AssiaHave a read: http://docs.oracle.com/cd/E12825_01/epm.111/readme/dimapsc_11111_readme.html
-
Hi ,
I am running the Query (Actual Vs Plan) in the BEx Analyzer, with the input for the characteristic like Fiscal Year, Posting Period and Cost Center(20 Single value) it not comming up with the plan data - Actual data is coming up fine.
If i gave 10 or less than 10 inputs ( single values input in the selection - option ) for the characteristic COST CENTER it coming up with all the data (Both plan and Actual). if the COST CENTER input values more than 10, it not coming up plan data (Actual data is coming)
Cost Center Variable is designed with an Authorization Variable.
Can any one please help me to know why plan data is getting miss when the input limit more than 10 (single values input in the selection - option) in the Cost Center Variable?
An also could you please share that, What is the Max limit for the Single values and Range Value for an Selection - option in the BEx Variable.A) Hi ,
In Report, I am having 2 variant.
1. For one variant, i have saved the input values for both the Select Single values & Select range for the cost center.
8 Values in single & 4 Values in Ranges
It coming up with data successfully.
2. Another variant having input only for select single values for the COST CENTER, it contains 20 records (This variant also have restricted with the same values as above variant for COSTCENTER variable)
Fiscal year : 2012
Posting period : 8
Cost Center : 20 values in Single (Here I have separated the range values into single)
It’s not coming up with plan data.
B) If I gave only first 10 values in the Single value, Output for both actual and Plan are coming up…………. If I gave the Second 10 value in the Single value and got the Output for both actual and Plan.
C) I have also checked the following details of this query,
Executed the query in RSECADMIN and checked the Authorization log as below,
Relevant Characteristics for Detailed Authorization Check (Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider ZPCA_M36:
List Is Empty:
There Are No Characteristics That Have to Be Checked in Detail
2. Checked the Single value input by iteration, 1 to 10, it retrieves data. More than 10 like 11, 12 … is getting failed to pull plan data.
3. checked the selection Value range by iteration and I gave the range value count up to 25 inputs, its works fine.
Thanks.
Regards,
Subashini. -
Loading Demand plan data from APO to BW
Hi Gurus,
We have requirement as below.
we have to extract two key figures from APO to BW system
The 2key figures of APO will get data as below:
First key figure has to hold Yearly snap shot and 2nd Key figure has to hold QTY snapshot.
we have constrained production plan & sales plan keyfigures in apo demand planning and the requirement is to extract these 2 keyfigure quaintest into BI.
Data Example as below:
KF1: Yearly snapshot
KF2: Quarterly snapshots
Yearly data means from Jan to Dec and
Quaterly data is as below
Qtr1 - Dec JAN to Dec
Qtr2 (in FEB) - Mar to Dec
Qtr3 (in May) - Jun to Dec
Qtr4 (in Aug) - Sep to Dec
so please let me know to how to handle or extract these data into BW.
Thanks,
ShailajaHi Venkat,
Yes, both the key figures are ther in the same planning area.
But my question here is how to get that data into BW? meaning...
If APO/DP does the planning in the month of Sep 2010 for Jan to dec 2011 and the
values are like
Sep-10 jan Feb mar april may june july aug sep oct nov dec
15 14 13 11 10 11 12 16 14 15 22 20
Dec-10 12 14 16 18 29 20 18 15 14 12 17 20
Mar-11 10 12 13 14 15 16 17 18 20
Jul-11 20 40 30 40 50
meaning, If the planning is done in the month of Sep 2010 for the yr 2011 as explained above that values should be extracted into BW and the next planning will be done in the month of Dec 2010 again for entire yr of 2011 i.e. Jan 2011 to Dec2011.
But the values should be captured as they are.. that means if i use DSO the values from request1 to request2 will be over written n if i use the cube they will be added up..
Request1 will hold data of Sep2010: planning data
Request2 wil hold Dec 2010 data ....n req3 will hold data of Mar 11...
but users want to see the values or planning figures as they are.
Hope i made my requimrent more detailled.
Please let me know the solution to get the data as it is in BW.
Thanks,
Shailaja -
Load a sales order with delivery date in the past
Hi,
We want to load in the system a sales order with delivery date in the past, and maintain the schedule delivery date in the past. To do that, in the customizing Sales And Distribution / Basic Functions / Delivery Scheduling and Transportation Scheduling / Define Scheduling By Sales Document Type, I selected the flag Blackwards. But the problem is that the rest of the dates in the scredule line: goods issue date, loading date, material avail.date and transportation Plan Date, are in blank and you cannot enter any data because the system deletes it.
How can I have these dates informed with dates in the past?
Thanks in advance,You can control this using the "Message Control" in the SAP IMG.
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Message Control>Influence Message Control
Using this you convert Error to Warning or even swith off this message.
Please refer this thread for complete steps:
Re: How to change an error message to a warning message in SRM
Note: you need to suppress the messages relevant to your case here.
Regards
Kathirvel -
SNP Planned Order start date in past
Hi
After SNP run, for the past requirements it is giving avaiablilty data as today but the planned order start date is in past. Now this order fails in CIF as the production version in R/3 is valid from today.
In the strategy profile we have backward+reverse with infinite scheduling. In this case the start date should be todays date for past requrirements... am I correct?
Regards
Abhishek RaiHello Abhishek,
We are also facing the same issue. Did you find any solution to this issue?
We are on SCM 7.0 with EHP1.
Thanks,
Mangesh -
have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?
Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport -
Problem with Exception Worksheet using Data from Supply Plan Data Table
I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
I'm using Demantra version 7.2. Thanks for any help!
Edited by: user9253208 on Mar 30, 2010 6:40 AMThanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.
-
Extraction of CO Plan data with filter on company code
Hello,
I have this urgent requirement:
Extracting CO Plan data (from COSP) by selecting on the company code.
Problem: company code not in extract structure used by 0CO_OM_CCA_1
Actual data are extracted with 0CO_OM_CCA_9.
My first idea was to use make an append to the extract structure of 0CO_OM_CCA_1 (i.e. BUKRS) and to fill this new field in the CMOD enhancement.
Do you have any other hint?
Thxs.
LauQHi,
I donot think the Selection works with any Customer enhanced fields(i.e the fields foe which, code written in CMOD) . So you have to keep filter some where either in Transfer rules or in update rules.
Or Check whether you can replace the datassource 0CO_OM_CCA_1 with the datasources:
0CO_OM_CCA_10
0CO_OM_CCA_9.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar Sharma -
I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?
Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
Thanks,
Adrian
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
I just got an iPad, and am trying to figure out how to get it going. I have an iPhone with a data plan through AT&T. Do I need to set up a separate account for the iPad, or can I use it under my existing data plan?
You need a completely different data plan for your iPad which you set up on the device itself and it is billed to a credit/debit card. You cannot share other plans and the iPad account will not appear on your iPhone or any other AT&T account.
-
Planning Data Pull process failed with timeout error
Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issuePlease see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein
Maybe you are looking for
-
Permissions issues - Adobe CC programs
Hi, I have been having continuous problems with the new Adobe CC programs, and after many times of running Adobe's cleaner tools, reinstalling and following the suggestions laid out by Adobe and the forums with no success - I am am going to try
-
iTunes Match keeps "gathering information" on my library, in a loop, without ever making to step 2. I know others have experienced the same issue, but the only advice given was for PC users. Am on Mac. Admittedly, my library is huge (over 10,000 song
-
How do I stop iCal from autoloading on startup?
iCal used to autostart when I started up my computer. Then I started keeping a flashdrive plugged in for convenience, but I had to remove it to prevent iPhoto from autoloading on startup of my iMacG5. Neither application is autostarting at this tim
-
Size contents to fit region size?
I have a HTML region that I have sized bigger than the default value. But when I have it embed the results of a URL I am not getting the entire new height of the region. is there a way to tell the region to size the contents to fit the region?
-
Help me..