MDD upgrade Panther to Tiger problem

I have 2 G4 MDD running 10.3.9 I wanted to upgrade them to Tiger to run CS3. The first machine upgraded normally the second one only gets to the checking hard drive screen +/_ a bit and the message comes on the screen that I need to restart the computer. All controls are locked out and only the power button will shut it down. I tried booting from the install disc by holding the C key down but it does the same thing. I have done this several times but it won't take it! Checking the install disc is ok no fault. Thoughts?

How can you be so sure?
First off, if you don't have at least 256 MB of RAM, upgrade the RAM*:
http://www.macmaps.com/badram.html
According to:
http://support.apple.com/kb/HT2191?viewlocale=en_US
The only 10.4 disc that will work with any MDD is the retail one which looks like * and does not say Upgrade, DropIn, or OEM.
If you are using the correct disc, verify the drive you have in your system is indeed a DVD drive. If it is a DVD drive, verify the clock battery has been replaced in the last 4 years.
If the clock battery has been replaced, zap the PRAM:
http://support.apple.com/kb/HT1379
If zapping the PRAM doesn't work, then you may have to clean the optical drive, or replace it.
- * Links to my pages may give me compensation.
Message was edited by: a brody
Message was edited by: a brody

Similar Messages

Photoshop CS2 upgrade Panther to Tiger - Help please!

Hi All,
I am doing a favour for my Aunt tomorrow and upgrading her G5 from Panther to Tiger.
She uses it mainly for Photoshop.
Is there anything i need to be wary of? I looked at the adobe web site and it seems to work on both systems, but do i need to download an update?
Any advice, greatfully received!

Jacob, have a look at THESE posts.

Upgraded Panther to Tiger: now Mail won't download email from Sympatico

Hi there,
If someone wouldn't mind advising... I just ugraded my wife's powerbook from Panther to Tiger (10.4.9)... and even though her email settings are still the same (incoming server, outgoing server, etc.), Mail won't collect her email from the Sympatico site.
Do I have to get rid of her Mail prefs and re-boot? Or something? (if it's the former, which prefs exactly, and where are they?).
thanks,
Malcolm

You can always delete your account from Mail and re-create it... There are 2 kinds of account settings for a Sympatico account:
The "old ones" that have the same settings since Sympatico started 10 years ago:
Username: b1**##
Password: access password
Incoming mail (POP3): pop6.sympatico.ca
Outgoing mail (SMTP): smtp1.sympatico.ca
Port server 25 for Outgoing (SMTP)
Port server 110 for Incoming (POP3)
The other Sympatico e-mail is the enhance one with MSN. The settings are differents and the authentification is different. Any new Sympatico accounts since June 2004 are on that new plaform:
Username: [email protected]
Password: e-mail password
Incoming mail (POP3): pophm.sympatico.ca
Outgoing mail (SMTP): smtphm.sympatico.ca
Verify that your server is set to requires anthentiation with agin your Sympatico e-mail and Sympatico password;
Both servers, Outgoing and Incoming, require a secure connection (SSL)
If you are not sure witch is what try to login online at: http://www.sympaticomail.sympatico.ca it will tell you if can upgrade to new enhance e-mail or if you sign in like a Hotmail account if you are already enhance.
I hope this help....
Cheers

Upgrading from panther to tiger problems

Hi i recently purchased Tiger discs from ebay to upgrade my panther system. As most applications now need 10.4 or about (including the new ipods which i have just found out after buying one). Now I have a g4 1.67 ghz powerbook and when i boot it with the install disc in it i get a kernel panic about how the disc has been formatted only for macbook and cannot be used on a power book. I wish i knew this before i bought the discs.. i plan on upgrading to leopard soon anyway but for now, is there anyway around my problem with the macbook install discs and trying to install them on an older power book?
cheers

No. They will not work ever. MacBooks have a totally different architecture. You bought what is called a machine specific disk; meant to install on only the model it shipped with. It came with a MacBook and will only install on that exact model.
See if you can send it back. E-Bay has alot of machine specific disks for sale. That is why most of us here don't recomend buying OS software on E-Bay.
The Retail disk is black in color. PriceGrabber.com lists one for sale for at Amazon.com.
Cheers! DALE

UPGRADE Panther or Tiger on Imac DV 400?

I am trying to determine which OS would be the better choice for my computer. I have been running 10.2.8 for a few years, but I just bought photoshop elements 4 and now I see I need 10.3 or better. I can use the educator discount from Apple for Tiger, or probably find an old retail disc for Panther, but I am wondering (for those who've tried with a similar system), which OS works better?
iMac DV 400 Mac OS X (10.2.x) original 10G hard drive, 576 ram

It really doesn't matter which one you decide to use. However, that original 10G hard drive must be getting a bit cramped. Without having the RAM up to full capacity (it will take two 512 MB chips), you are overly depending upon virtual memory, which needs lots of free hard drive space to write to. Unless you are doing frequent restarts and keeping lots of hard drive space freed up, you could start having problems, and possibly losing data.
Before considering upgrading the OS, it would be best to consider upgrading the hard drive and/or installing more RAM.

Upgrade Panther to Tiger

Dear all
We are currently running 10.3.9 and need to update some software. Therefore we need to upgrade the OS system.
I am concerned upgrading from Panther to Leopard will cause problems and would rather update to Tiger.
Could anyone advise me on the process and if my concerns are valid.
Would anyone suggest differently and think Panther is the best option.
Any links to further information or advice would be really useful.
Many thanks in advance.

sarah:
Your iMac G5 will easily meet both the minimum system requirements for Tiger and the technical specifications for Leopard. So you can go either way. Your computer will support up to 2 GB - 184-pin PC-3200 (400MHz) DDR SDRAM, but your 1 GB will work well for you, unless you decide to upgrade.
The main concern at this point would be whether you have third party applications that may not be supported by Leopard. In terms of which way to go, costwise the installation software for either OS will cost about the same, so, if everything else seems in order, you may be ahead going for Leopard.
Please do post back with further questions, or any specific concerns you may have.
Good luck.
cornelius

Upgrading Panther to Tiger & iPhoto 4 to iPhoto 6

I did a complete bootalble carbon copy backup of my Mac HD to an External HD. Did a "erase and Install"(erase Mac HD, and clean install of Tiger). Installed iPhoto 6. BTW, I changed user names on the new install cuz my wife never uses the mac and I go tired of trying to maintain two user accounts while using Panther. New user name is Jerry. Old user name was Shari. I have admin. priveledges onto old Back up Ext. HD as well as new installed tiger on mac hd.
Everything has been going pretty well. Got he network and printers going. Reinstalled misc programs like Elements, and Canon Scanner, without problem. Imported iTunes music.
I am having trouble bringing the iPhoto 4 pictures from my external HD into the iPhoto 6 Mac HD. I tried iPhoto's "Import to Library" from the External to the internal HD, but just got a spinning gear and had to cancel. I tried dragging the iphoto 4 Library to the iPhoto 6 library, but the pictures don't show up in iphoto 6 and now i'm afraid I mucked things up in my pictures>iPhoto Library. There is another iPhoto below the iPhoto Library.
ie. pictures>iphoto library>iphoto library>(all my iphoto 4 picts from 2000 thru 2006 + albums, etc.)
I've read of holding down the option key while opening iphoto library folder below iPhoto library and it gives me the option of Create or choose library, but I really don't know if this is what I need. What I want is to basically restore my iPhoto 4 pictures on the External Drive to iPhoto 6 on my Mac HD. Any suggestions would be greatly appreciated.
iMac FP 20" Mac OS X (10.4.5) 1.2 Gig Ram, External f/w Drive

Jerry:
To get the old library up and running on the new computer all you need to do is copy that iPhoto Library folder intact into the Pictures folder on your new computer. Then reset the ownership and permissions on that folder and its contents as follows:
Setting Permissions for iPhoto Library Folder
1 - Select the iPhoto Library folder and type Command-I.
2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
3 - Then click on the "Apply to enclosed items..." button.
Now when you launch iPhoto 6 it will tell you it needs to update the library. Go ahead and do so. That should give you a V6 library.
G4 DP-1G, 1.5G RAM, 22 Display, 200G HD, 160G HD, 250G FWHD, QT 7.0.4P Mac OS X (10.4.5) Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

Upgrading Panther to Tiger through imaging

Is there a way to upgrade an existing Apple computer that is running Mac OS x.3.9 to Tiger. I have the licensing.

Jerry:
To get the old library up and running on the new computer all you need to do is copy that iPhoto Library folder intact into the Pictures folder on your new computer. Then reset the ownership and permissions on that folder and its contents as follows:
Setting Permissions for iPhoto Library Folder
1 - Select the iPhoto Library folder and type Command-I.
2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
3 - Then click on the "Apply to enclosed items..." button.
Now when you launch iPhoto 6 it will tell you it needs to update the library. Go ahead and do so. That should give you a V6 library.
G4 DP-1G, 1.5G RAM, 22 Display, 200G HD, 160G HD, 250G FWHD, QT 7.0.4P Mac OS X (10.4.5) Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

Upgraded from panther to tiger, now have several problems...help??

Hey guys(and girls)
i recently upgraded my iBook G4 from panther to tiger and am having some problems...first off Airport only get 2 bars...if im lucky. my room is about a good 15 feet from the router, and we are using 802.11G. i put it right next to the router and same. 2 bars. also my other problem is that my iBook tries to open .BIN files in quick time and an error pops up because quick time doesnt support .BIN. any help would be appreciated

Hello Leesa2
If it is Connected then please try to register your device to Wireless provider .
KB00510 How to register a BlackBerry smartphone with the wireless network
Wait till a Registration messages comes in your message box.
After that perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back.
From your BlackBerry Browser Go towww.blackberry.com/integrate then try adding your email account.Please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Having problems upgrading from Panther to Tiger

Hi there!
I'm new to this place, but very desperate to find answers. I have been trying to upgrade from panther to tiger for the past week and have gotten a mess. I have to restore my old panther system after a panic kernal while trying to install tiger. I have tried to upgrade, install and archive and erase and install tiger and the same keeps happening: after 30-30% installation of essentials, I get a "try installing again" message and immediately goes to a blank blue screen. I have to reboot from my eDisk on the external hd and re-install my old system. I've done EVERYTHING I can find on the web and in the install suggestions. Everything has been updated (firmware, sofware, etc.), I tired disconnecting external devices except the keyboard and the external dvd I need to install and still the same thing...over and over and over!
So, now I'm down to the fact that I need to install CDs (internal) instead of DVD off the external drive. However, when I went and downloaded the form for the exchange the Tiger versions listed (MA453Z/A, MA454Z/A) do not coincide with the version I purchased (M96397/A). So I'm trying to figure out what this version is that I purchased and if it has anything to do with my big install mess!
So, any ideas out there? Glad to hear your input!

Call 1-800-MY-APPLE WRT media exchange program and the DVD version you have.

Why upgrade from Panther to Tiger on G4 iMac?

I have two iMacs. I use a G5 recently upgraded from Panther to Leopard 10.5.5. My wife has a G4 with Panther 10.3.9.
Now that I have Leopard I have a Tiger install license available.
Are there good reasons to upgrade my wife's G4 to Tiger?
She uses it heavily for e-mail, internet, and MS Word.
She's networked to my G5 through Airport and we use printer sharing and file sharing.
Her G4 works great, but I'm wondering about security issues.
Comments?
-Bob

Correct me if I'm wrong but I think Apple is still releasing Security updates for Panther too, isn't it?
I think some of the Panther software is starting to show its age limitations for Internet capabilities, and things like iTunes for all the new iPods, etc. On one hand if you're not actually having problems then my feeling is an old computer best runs software designed for it. On the other hand I am not sure you would lose any functionality if you did upgrade. I think most Panther applications run on Tiger, the system requirements are pretty similar. It's not like when you upgrade to Leopard that you suddenly lose Classic support and it requires (demands?) a faster processor. From my personal perspective upgrading to Leopard really makes a big difference in capabilities both ways and may even be a negative upgrade if you run old software the way I do. Upgrading from Panther to Tiger didn't have any downsides and had several upsides in terms of software is still being brought out for Tiger.
[Mac OS X 10.4 Tiger system requirements|http://docs.info.apple.com/article.html?artnum=301341]
[OS 10.3 Panther requirements|http://docs.info.apple.com/article.html?artnum=106163]

G5 killed by mail when upgrading from Panther to Tiger...HELP!

Hello,
I just upgraded one of our G5s from Panther to Tiger. When I opened mail, it began "importing" all the messages (I assume because of the update to mail.app). Now, the user who's computer I upgraded contained 9GB of mail (!!!) but the G5 had more than enough space for this. When the "importing" completes, mail.app is open and all folders/subfolders, etc. are there, but the program doesn't contain any of the messages from the import. Every folder/subfolder is empty, the inbox is empty, etc. AND, to top it off, the HD of the G5 now has zero free space (while, when before the import, it had at least 40GB of free space). Does anyone know a fix for this? Has this happened before?
Regards,
Kristin.

OPEN LETTER TO THE MAIL 2.0 CODING TEAM. RSVP.
with thanks to DAVID GIMENO GOST, for answering so many people's posts about all the mail 2.0 bugs.
hi guys,
i love all things apple, and i have done for twenty years.
but with respect, your build of mail 2.0 really could be a lot better.
moving my mail from 1.0 on an ibook g3 running os X 10.3.9, over to mail 2.0 on an intel macbook 1.83 running os X 10.4.7 has been a nightmare.
the discussion boards of many mac sites feature countless cases of people making the move from 1.0 to 2.0, with all their e-mails disappearing.
having spent two weeks reading the knowledge forums, and learning about emailchemy, plus all the complications which, even with that third party program, still exist in moving one's mail over from version 1.0 over to 2.0, are both massive and horrendous.
and that's for me, who has twenty years of finding my way around mac bugs.
but this one is the most difficult i've ever seen, as well as being one of the most widespread problems in a FULL VERSION RELEASE of an apple program, which apple has done nothing to resolve during the six months in which this problem has been widespread in the mac community worldwide.
so thank god for DAVID GIMENO GOST !
i'm amazed that apple still hasn't come up with a patch for moving mail from 1.0 to 2.0.
even now, while i've finally got all my mail back today, 95% is showing as unread, due to the last obstacles in the process, which i can no longer face solving.
i've also lost hundreds of red mail flags during the transfer :o(.
PLEASE PLEASE PLEASE, guys:
we shouldn't need to be buying third party software to move our e-mails from apple mail 1.0 up to apple mail 2.0, and even then be faced by massive hurdles to overcome, which take weeks for someone who at least has SOME idea of what he's doing.
i pity all the people who read the numerous forum posts about how difficult it is to transfer their mail from 1.0 to 2.0, and simply give up on the spot, and have to start their e-mail history TODAY, unable to access their previous e-mail again - potentially now for ever.
because the ironic joke is that we can't even have an access copy of mail 1.0 on our macs to read our old e-mails, unless we hack that program out of the 10.3 cd installation set, which the gurus on your own web site recommend us NOT to do !
so what are we supposed to do, to access our old e-mail, which we can't open, even though YES, it is in our mail folder, and YES, we did full rebuilds of every mail folder, and YES, we trashed our mail preferences first.
e-mail is now at the very center of the average mac user's digital life.
a user's most important program should not require countless hours scrolling through the astonishing number of problems within mail 2.0, which the apple.com discussion boards evidence, with new problems being added every day.
please sort this out, and build a patch, for the sanity of the many people who love apple, but who are unable to access any of their old e-mails.
because i wouldn't wish the last fortnight on anyone else.
RSVP, APPLE.
with best wishes to everyone on the infinity loop,
michael thorne
london, england
[email protected]
ps: if you're a mac user who has been affected by the mail 2.0 disappearing bug, please post a reply to this message, and send me an e-mail to: [email protected], so that we can draw apple's increasing attention to it. thanks.
MacBook1. 1.83 GHz. 512 MB. Mac OS X (10.4.7)

Be carefull when upgrading from Panther to Tiger

If you choose to upgrade from Panther to Tiger by using the Erase and install option on the Tiger DVD install disk, your XServe RAID won't mount. The problem seems to be that the driver for the RAID won't be updated in the process.
The solution for me was (by advice of Apple Support) to reinstall Panther. My RAID came up fine and I then did a upgrade to Tiger using the update and install.

Mattur:When I restart to install the OS, it goes into a Kernel Panic and tells me to restart.I take it to mean that you mean you put the install disk and open it and at the prompt you restart, and it goes into the kernel panic. I notice too that you sayI can reinstall Panther with the disk the computer came with , but I can't install Tiger..In other words there is a problem is with the Tiger disk.
Are you using a Full Retail Version of Tiger? Computer specific versions or update versions will not work.
If you are planning to install Tiger check out System Requirements to be sure your computer complies.
Good luck.
cornelius

Printer doesn't work after Panther to Tiger upgrade

After upgrading from Panther to Tiger my usb connected Canon PIXMA iP5000 printer no longer works. In printer setup utility when I click "add" I see the ip5000 but the "Print Using" dialog box says "please select a driver or printer model". In the drop down list under Canon there is no driver listed that corresponds to my iP5000 (also, only gimp-print drivers are listed for some reason).
I reinstalled the printer software from the disk that came with the printer but still nothing relevant appears in the list under Canon. I installed a newer OSX driver from the Canon website but still nothing relevant (and still only the gimp-print drivers in the list under Canon).
Using the finder search function I located a file called ip5000.ppd on the hard drive. I selected this file in the "Print Using" dialog box and was then able to add the printer. When I try to print though nothing comes out of the printer.
I installed a driver from www.printfab.com for the iP5000. This works fine but apparently I have to buy a license for $61 to use the software?
Can anyone out there tell me what's going on? Why is the driver from the Canon web site not showing up under the Canon tab in the printer setup utility? Any idea where it is or what file extension it should have so I can search for it?
Thanks,
Stickman007
imac G5 PowerPC Mac OS X (10.4.8)

In step 3, I moved the contents of the BJPrinters
folder to the desktop instead of deleting them
(deleting is so final).
We need to delete and empty the trash. It seems that for some setups, leaving the files on the system (including the trash) interferes with the new driver installation/operation.
In step 4, the only file that seemed close to what
you mentioned was CanonPrinterDrivers.pkg. I moved
it to the desktop also.
This is the original package included with the OS for the Canon BJ drivers we are deleting. In case you ever need to add an old Canon driver then it would be best to put this file back. But it is odd that there is no other Canon package. I expected there to be one for the iP5000 that you installed.
The result was the same as before - when I try to add
the printer the "Print Using" menu still shows a
greyed out "please select a driver of printer model".
The Canon folder still shows the same gimp-print
options, none of which are related to the iP5000.
Yes. The iP5000 won't appear in the list as it hasn't been written to do so. As I said before, the driver, upon detection of the printer, adds the printer to the list. You cannot browse to it.
Let me know if you have any other ideas (or if I need
to delete the files rather than just move them to the
desktop).
So, I think you need to do the steps again, this time delete the contents of the CanonBJ folder and empty it from the trash. The thing I would add this time is turn off the iP5000 (unplug the power cord but leave the USB connected) at Step 6 (you may need to shutdown rather than restart the Mac). Then start the Mac, install the latest driver (which is v4.1.9) do the disk permissions and then, before you open the Printer Setup Utility, reconnect the power cord to the printer. Hopefully now the driver will detect the printer and add it to the list.
Paul

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
Regards
TD

MDD upgrade Panther to Tiger problem

Similar Messages

Maybe you are looking for