MDD will not boot with 9200 agp card in it....but with a 16mb pci card

I just got the MDD today and noticed an extra tab on the card....is this an on/off switch so you have to use this card?
So Ieft it in and put in the ole trusty 16 mb rage card and booted.
My 9200 agp works in my sawtooth but not this one and I suspect its that extra tab on there....or I could be wrong.
Any way I guess I will use the dvi -d output *and was wondering a good place to buy the dvi to vga adapter for my crt.*
Thanks for any input...
Tony B.
null

I did read that earlier today but wasn't sure if it would work on that card.....I will try that for sure....thanks !!!!
Tony

Similar Messages

My HP mini 210 will not boot up. The repair utility starts, but runs and runs with no results.

My HP mini 210-2080NR will not boot up. The repair utility starts, but runs and runs with no results. Safe mode start up also fails. Tried BIOS diagnostics with f10, memory passed, but HD startd but did not finish. Diagnostic log shows rusult 0303. Any ideas would be helpful. Thanks.

You can order HP recovery media here, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

More detail and a reply for the CQ50 - 130US will not boot with 8gb ram post

The specs, on the web site say that the max memory supported is 3GB DDR2 because the notebook was built with the OS Vista(32 bit) installed so that’s why the manual has the 3 GB max. memory supported limit. The 32 bit OS can’t address memory over 3.12 GB. To my mind that is not a spec. but rather a tech. writer who made a mistake and copied the sales literature. With Windows 7(64 bit) Pro. installed the OS can address up to192GB of memory if the system supports it. Other Compaq and HP Notebooks can deal with 8GB of memory installed. That’s why I would think HP’s could easily fix this with a patch or use one of their other BIOS’s.
The difference between 4GB and 6GB is that with 6GB system runs faster and the display quality has improved. I have set the cache size to large and the executive paging is set to off in the registry. The menu(System Properties - Performance Options – Advanced – Virtual Memory) is set to automatically manage the paging file size.

You should keep it in the original; thread you started.
http://h30434.www3.hp.com/t5/Notebook-Hardware/CQ50-130US-will-not-boot-with-8gb-ram/m-p/490157

MBP15 1.83 GHz Will Not Boot With 3GB Upgrade

I'm trying to increase my MBP's ram to the 3GB limit. This is a 1.83 GHz 15" model.
It will not boot with 2GB & 1GB sticks of identical mfg & specs. It will boot with one or the other...
Any ideas?
Thanks,
Stradioti

Hi
according to the Apple specs for the 1.83GHz mbp's - 2Gig of memory is the limit......
512MB (single SODIMM) of PC2-5300 (667MHz) DDR2 memory on 1.83GHz configuration; and 1GB (single SODIMM) on 2.0GHz configuration; two SODIMM slots support up to 2GB
Crucial Memory says the same.

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HP G62 Will Not Boot With Power Cord Plugged In

I have an HP G62 laptop that is about four years old. I've had a couple of problems with it before that were resolved relatively satisfactorily, however five or six months ago I started having a new issue. The laptop will not boot with the charging cord plugged in, whether there is a battery in it or not. Nor will it return from sleep mode (screen black, status light on the power button flashing) with the charging cord plugged in, whether there is a battery in it or not. It simply shuts down and I end up with an error screen the next time I boot up. I have tried other charging cords and it has been the same, however the cord will still charge the battery. This means I have to charge the battery, unplug the cord, boot up the computer. This annoyance is worsened by the fact that the battery is old and unable to hold charge for very long at all and I fear one day even the battery won't be enough to boot the computer.Can I fix the power cord issue? Should I buy a new battery? Or let my computer give up the ghost and scrounge for a new one? Any help would be greatly appreciated.

the charger input could possibly need replaced and/or the charger

TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao.

X79A-GD65 (8D) will not boot with 4930K or 3930K

Short version:
My system will not boot but gets stuck at "09 Power on South Bridge Initialization"
Detailed description:
I just bought this system and am when I tried to start it it got stuck at "09 Power on South Bridge Initialization". I have removed everything that is not necessary (gfx-card, HDDs, etc.) and only have the CPU and one memory stick inserted (in slot 1 as per the manual). I have also unplugged and put back all power cables from the PSU several times. I have also tried using BIOS A and B.
As I read on this forum that a BIOS update was needed for IVY-Bridge CPUs I bought a 3930K today to see if I could get the system up and running but it still gives me the same error code.
My board serial number is 601-7760-010B1312109204, assuming it is manufactured 1312 = December 2013.
I don't know the BIOS revision as I have never managed to get past the 09 status code.
Any ideas on what the problem could be?
Bought this monster PC as I have a delivery for a client in need of some RAM-heavy processing, so am really starting to feel stressed out about this by now.
Thanks in advance!
System details:
- MSI X79A-GD65 (8D) X79 S-2011 ATX
- INTEL CORE I7 4930K 3.4GHZ 12MB S-2011
- INTEL 530 80GB SATA SSD MLC RESELLER KIT
- INTEL 530 480GB SATA SSD MLC BULK (4 of these)
- FRACTAL DESIGN INTEGRA R2 750W
- ASUS GEFORCE GT 210 1GB DDR3 PCI-E VGA/DVI/HDMI SILENT
- KINGSTON 64GB 1600MHZ DDR3 ECC REG CL11 DIMM (4X16GB) W/TS (two kits, 128GB in total, don't really need ECC but that's what I could find needing 16GB sticks)

even compared to just 10 years ago sales staff have became really dumb as there just hiring people who do not care about anything as long as they get there cut of a sale (usually all they know is basic Consumer parts they stock) and nearly non of them unless they specialize in that level of equipment will have 0 idea what they work with on a pro level part (ECC memory tends to be used on servers and Professional workstations so if they do not use that type of gear then they probably have no idea what ECC really is at all)!
also in that time some major things have happened especially with computer parts like the memory controller moved from the Chipset to the CPU same with the SATA controller , onboard GPU (thats now on the CPU and some have it some don't) and alot of other things and I guess that the people you dealed with had no idea the memory support has very little to do with the board (all the board can do is have BIOS Timing sets now and lists of parts it supports) and is now to do with the CPU alot more as it has the important stuff on it (there very close to a SOC (System On Chip) now)!
if you plan on building another computer remember to do some research yourself before you get a CPU as it is nearly the most important thing of all and they have different features tied to them and do not expect sales guys to have a idea unless there also a Technical support staff member too and work on computers that are of the same class your trying to make and have at least used the same level gear (usually if your doing something like that find a friend who is a computer nerd tell him what your trying to do and get him to help you choose all the parts)!
let me know how it goes when you get the Xeon and have it installed?

T61 will not boot with nvidia quadro 140m driver

Hi all,
A couple of weeks ago, after allowing MS update to install some FTDI driver updates, my system will not boot up and hangs shortly after the initial vista loading screen. The screen goes black with some HD activity and eventually reboots. After trying a couple of restore points with no luck, I started to remove the latest driver updates and other software to my system again with no luck.
If I uninstall the nvidia driver and use the Standard VGA driver, it will boot and come up properly. I've done a bunch of web searches and searches on this site and can't find my exact circumstances. Its hard to believe that it could be a hardware issue since it started after a software update, but since it hasn't been a problem for anyone else, I'm just not sure at this point.
I've tried earlier versions of the nvidia driver, removing other drivers and services trying to find a coincidence, but nothing seems to work. I'm kind of at a loss at this point. Does anyone have some suggestions?
Thanks in advance,
Dave

More info on my system:
OS Name    Microsoft® Windows Vista™ Business
Version    6.0.6001 Service Pack 1 Build 6001
System Model    6459CTO
System Type    x64-based PC
Processor    Intel(R) Core(TM)2 Duo CPU     T8300 @ 2.40GHz, 2401 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date    LENOVO 7LETC5WW (2.25 ), 11/14/2008
SMBIOS Version    2.4
Installed Physical Memory (RAM)    4.00 GB
Also, does anyone know if using the Standard VGA Display driver without problems on this system means that the video card hardware is working? In other words, I'm trying to rule out a hardware problem with my nvidia quadro 140m card, so if the system works fine with the standard vga driver, would that mean the hardware on the card is ok?
Thanks,
Dave

2008 mac pro will not boot with HD 5770 installed.

Does anyone have suggestions for this. When I say it will not boot, I mean it will not respond at all to the power button if the card is installed (or at least if the power cord for the card is plugged into the motherboard. This is a mac pro version 3,1 with 8 cores 2.8 xeon, 22GB ram, running 10.6.8. Boots fine with xt2600 but will not boot if the 5770 power cord is plugged in. THis is an apple specific card from B and H. Perhaps I received a bad card. I have tried with and without the xt2600 installed and have tried in slots 1 and 2. I do not have any other PCI cards installed. Iknow this is not an "officially supported card" but it seems to work for everyone else.

Sounds like the ATI 5770 issue to me.
And 5770 worked on 1000s and 1000s of Mac Pro all models, like mine a 1,1 (there is even a thread of 160+ posts)
Where did you buy the cable and card, if from Apple and it is recent, exchange.
You are saying you never got to work...

HP Pavilion dv7-4065dx will not boot with continual blinking capslock

Hi,I have a HP Pavilion dv7-4065dx laptop with Windows 7 64 bit that will not boot up or go to the Bios screen. When the laptop is turned on, you hear the system fan start, power button light comes on, and the caps lock button starts to continually blink once every three to four seconds. The HDD activity light is also on but is solid red with no blinking. No changes have been made to the laptop and it was working perfectly fine just a few hours earlier. I have attempted the hard reset of the computer and reseating of the memory cards, but the laptop still would not boot. Any help on figuring out what is wrong with the computer would be greatly appreciated. Thanks. HP Pavilion dv7-4065dxProduct # WQ861UA#ABA

hp dv7-4065dx caplock key continous blinking the same problem i also faced but do the below step which solved your problem Bios corruption power on your laptop block the fan air through cotton or any cloths 10-15 minutes (after heating) then power off and remove the cloths and power on it should be display visit hp driver and download the latest bios & bios tool first install bios tool and select usb to store connect a pendrive for location after installed then install your latest bios after sometime it will auto reboot and install the latest bios we sure while updating bios power adpator must be connect problem solved........

Power Mac G4 MDD Will not Boot

I have a dual 1.25. I had the screen come up and tell me you have to restart.
restarted computer and now it will not boot. I get a black screen, cannot boot from CD, CD lights up then turns off. All fans turn on, the start up chime, chimes. Mouse does not seem to work, no lights and neither does keyboard. reset pmu by pressing button on mother board. removed PRAM battery and replace after 30 seconds. There is a red led lit on mother board, close to the RAM. I have replaced video card, not fixed. I have reseated every board I can, including ram. I am at a total loss. i hold down option, nothing happens. Help..
I have a WD 1.5 TB with full operating system on it, plugged in via fire wire, and i cannot boot from that. I was downloading from an FTP when the force reboot happened.

Will try that next, have appointment at genius bar, just thought i would bounce it off some people here. I did disconnect all peripherals, and unplugged battery for 5 minutes. I did not replace PRAM battery, but would the mouse and keyboard not work because of PRAM>? Anyways, still trying. Thanks for the input, much appreciated.

Airport extreme will not boot with USB hard disk plugged in.

Hi there,
I'm using the Airport Extreme Base Station, and I find that if I have a USB hard disk plugged into it, it will not boot up, it only hang-ups with an amber light, and stays there indefinitely. It's not a terrible issue because it can be overcome by unplugging the disk then rebooting, but it's irritating, especially when I'm not home and there is a power temporary outage and my wife can no longer access the internet or I can no longer access my disks over the internet.
Is there a solution to this problem?
Thanks,
Marc

I'm going to have to replace the unit, as I'm unable to turn off DHCP services, which is wreaking havoc on my server based environment.
Considering THIS issue *AND* the major DHCP show stopper, frankly, I'm debating etiher the fire pit or tossing the damned thing into the intersection and watching it be reduced to the trash that it is.
Either way, there'll be 7 feet of pack ice in **** before I buy another Apple networking product.
I'll decide later, with a jaundiced eye, regarding our XServe unit. Might reformat it to Linux...

System will not boot with Seagate 3Tb expansion drive plugged in.

I have a HP Pavilion HPE h8- 1214 Desktop , I recieved a Seagate 3TB expasion drive as a gift but when plugged in, the system will not boot. It turns on but thats it. It never gets to the boot sequence. I have it plugged into the top 3.0 usb slot and have tried all of the other slots as well with no sucess. But if I leave it unplugged the system boots right up. I can then plug it in and it works fine. I have plugged it into my wifes HP All- In- One and it boots fine and works. I have a WD 2TB drive that works fine as well on my system . I have searched Segates support for hours and all they say is to change the boot sequence. Have tried that, no go. What they dont get is no matter what I do if that drive is plugged in it never gets as far as booting and reading the boot sequence. Please help. Thank you!

Hi NcBunky,
Are you using Win 7 64 bit? Did you update the Texas Instruments (TI) USB 3.0 XHCI Host Controller?
I have an H8 1380t PC. Updated the TI USB 3.0 driver and had the same problem.
When booting the PC with the USB 3.0 external drive connected to the PC the PC would not boot. When booting the PC with only the mouse, keyboard, and a USB 2.0 external drive attached the PC would boot. Once booted you could attach the USB 3.0 drive and it worked fine.
Solution was to roll back (reinstall) the TI USB 3.0 XHCI Host Controller to the original factory installed driver.
System now boots with the external USB 3.0 drive attached.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

T410 will not boot with new SSD

I've cloned my HDD to a new SSD, but it will not boot. It goes into a Lenovo Think Bios splash screen / Black screen loop. I booted off a repair disk and performed a repair, but it is still doing the bios loop thing. This has happened with both an OCZ and a Kingston SSD. Any ideas? Thanks...
Solved!
Go to Solution.

I'm going to venture a guess that the drive was not cloned properly.
The "new" drive must be in the machine's HDD bay, and the "old" one in the USB enclosure.
I always use Clonezilla for the rare occasions that I actually clone something, but Acronis should do just fine as well.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

MDD will not boot with 9200 agp card in it....but with a 16mb pci card

Similar Messages

Maybe you are looking for