MDG-Hub: Tried and tested methods for ECC customizing synchronization

MDG Experts, I am looking for guidance on synchronizing configuration and customizing data between ECC and an MDG-Hub. I reviewed documentation on (a) synchronizing via BC set import and (b) via TMS although I was looking for a little bit more detail and steps involved in setting up ongoing synchronization between ECC and an MDG-Hub.
I am looking for experiences and suggestions on this topic. Thanks in advance.

Hello Karthik
I have used - BC sets to transport the ECC configuration to MDG. Another way is to transport the tables directly from ECC environment to MDG.
Check this -
http://wiki.scn.sap.com/wiki/display/Basis/Business+Configuration+Sets+(BC+Sets)+and+their+use?original_fqdn=wiki.sdn.sap.com
Kiran

Similar Messages

Required Config and testing Docs for cash management/cash forecasting

Hi All,
My client need to implement cash management/cash forecasting ..
Can anyone send the details Required Config and testing Docs for the same as earlier i have not worked in this area..
Thanks in advance...
Regards,
Sandip

Hello
Please check the below link
help.sap.com/bp.../J11_BB_ConfigGuide_EN_IN.doc - United States
Thanks & Regards
Phaneendra

Can we hav call transaction and session method for an application

can we hav call transaction and session method for an application ?if yes how?

Hi ,
You can. If Call Transaction fails, a batch input session can be created.
Check this example-
Call the transaction. Messages from Call Transaction are stored in the
internal table messtab
CALL TRANSACTION 'LT01' USING bdc_tab MODE 'N' UPDATE 'S'
      MESSAGES INTO messtab.
IF sy-subrc = 0.
Call transaction successfull, get the number of the Transfer Order that
was created
    LOOP AT messtab.
      IF messtab-dynumb = '0104' AND messtab-msgnr = '016'.
        w_transportorderno = messtab-msgv1.
      ENDIF.
    ENDLOOP.
ELSE.
Call transaction failed, create a batch input session instead.
    PERFORM open_group.
    PERFORM bdc_insert USING 'LT01'.
    PERFORM close_group.
ENDIF.
Regards,
Sookshma

Tiling and collision methods for this app

I plan on making a game where the player travels down though a level. I have created basic player/objects collision games using AS2 & Mclips for browser/PC and some basic AS3 apps also, but I want to focus on making this one to run well/fast on iOS and Android via flash/AIR.
The goal will be for the player to avoid colliding with rock/tiles. There will not be too many enemies to track but a few powerups may be on the rock edges to pickup.
Can someone give me any suggestions/links for current Tiling and Collision methods for this environment? Should I use starling?

Thanks Glad, I hear that a pixel perfect collision method like bitmapdata hittest can be a tremendous overhead in CPU time, but I guess I will have to try it and see.

Design and Testing Suggestions for Different Screen Resolutions

Intermediate Dreamweaver CS3 user, in need of "Design and Testing Suggestions for Different Screen Resolutions".
Thank you, J. Chavez

Adobe Browser Labb and BrowserShots.org

Clone a method for my custom object.

Hi!
We have a method:
comp.saveFrameToPng(compTime, fileObj);
I have my custom object block.
Is it possible to clone "saveFrameToPng" method for my custom object?
I've tried:
Function.prototype.clone = function() {
    var that = this;
    var temp = function temporary() { return that.apply(this, arguments); };
    for(var key in this) {
        if (this.hasOwnProperty(key)) {
            temp[key] = this[key];
    return temp;
And then in my custom object:
function block (comp)
this.saveFrame = comp.saveFrameToPng.clone();
But thin won't work properly
Help me please if this possible.
Thank you in advance!

Hi
static public long powerTwo(long number)
     long ret = 2;
     if(number == 0)
          return 1;//2 to the power of 0 is 1
     else
                //use a for loop to loop as many times as specified by number,
                //times 2 to ret every time it loops
     return ret;//return the answer
}Hope this helps

I have tried several published methods for using umlauts but none have worked. I have used the IPad 2 with the screen keyboard and the Logitech keyboard, all to no avail.

I have tried several methods for using umlauts but none have worked. These include the screen keyboard and a Logitech keyboard. I tried pressing and holding an o for several seconds then (while holding the o down, pressed the o umlaut in the pop-up screen with no results.

Instead of using a second finger to press the umlaut while holding down the o key try this:
Tap and hold on the o until you see the alternate choices then slide your finger up to the umlaut.

Housebank and payment method for vendor

Hi
While doing MIRO, i want housebank and payment method to populate from vendor master data. I maintained both these details in VM data but its not populating automatically in MIRO. Please help. (m using ECC 6)
Sadhana

Thanks Rinku.
If we keep house bank and payment method fields blank while doing data entry, system will pick them up from VM data at the time of payment run. Right??
But if the housebank field is mandatory for data entry (as in my scenario), then we have no option but to fill the fields up at the time of MIRO or FB60.
In my scenario, daily there are 150 bills processed at one centre, and the user has to fill up these two fields every time. Is there any other solution so that this trouble can be saved?
Thanks (points assigned).

To Monitor inbound and outbound messages for ECC 6.0 business system

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Transaction STWB_1 and Test catalog for IS OIL

Cannot find Test catalogs TK IS-OIL* from transaction STWB_1 as mentioned in document Appl_Test_doc_600_1.pdf attached to SAP Note 890458
I tried to do the following from Appl_Test_doc_600_1.pdf:
Call transaction STWB_1 or from the SAP menu, choose: Tools → ABAP Workbench → Test → Test Workbench → Test Organizer → Manage Test Catalog Choose Utilities → Manage Favorites (Shift+F9) The Manage Favorites dialog box appears.
Select Add favorite (Shift+F5) The Favorites dialog box appears.
Enter OIL_ECATT in the Management Data Package field. Choose Execute (F8). Select all three test catalogs
TK IS-OIL APT
TK IS-OIL APTPRA
TK IS-OIL SC Choose Copy (Enter).

I have ECC600 and not 46C as in the not you sent me
Anyway thanks for the support
just for information, in this case we have to Apply ECAK020859.SAR for eCATT and P7IK039071.SAR for custumizing (OSS note 890458)
Regards

Change Management and Test Workbench for documentation

Hi,
I would like some clarification on the association between change requests and test workbench.
I'm going through scenarios such as creating a maintenance project, creating a task list and service message and then creating a transport request.
During these steps, I want to document the test results prior to migrating these transports into the production system.
My questions are - how do you link the maintenance project and also urgent corrections to a test procedure and documentation. It appears that by using solar01/solar02 and stwb_2/stwb_work, these tests are linked to a project and not necessarily a "change request"
I greatly appreciate if you can elaborate the association between the various areas a bit clearer for me.
Thanks!!!

You need to look for information on usage type "DI", "Development Infrastructure" or "NWDI" (all common abbreviations for the same thing). There were some very good presentations on NWDI at TechEd this year.
Here are some links to help documentation:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm">Administration of the Development Infrastructure</a>
<a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developersguide">SDN NetWeaver Developers Guide</a>
Rich

FM and/or method for displaying file from frontend ?

hi there,
i have word-documents, excel-sheets, PDF'S, etc.......... on my frontend PC.
i need a function module and/or method of class to OPEN this files. do you
have any hints for me ?
regards, Martin

hi,
thanks a lot, friends. i found out that execute from cl_gui_frontend_services works perfect for me.
BUT: is it possible to load a file from APPLICATION server too ? in the example below
file is on presentation (client).
call method cl_gui_frontend_services=>execute
      exporting
        document = 'C:\Dokumente und Einstellungen\d78358\ALTMP_D01_2.PDF'
          maximized = 'X'
        exceptions
        others   = 1.

Objects and instance methods for JSP?

I've been looking through the JSP 2.0 specification and, while I'm extremely impressed with the improvements in this version, I'm also disappointed to see that everything still boils down to statically bound methods.
What I mean by this is that the template part of a JSP is like an anonomously named static method associated with the JSP class. The new tag-files in JSP 2.0 are terrific, but they also have this same kind of static binding.
As far as I know, only JPlates (www.jplates.com) allows you to develop web applications using actual instances of classes that have instance methods for expressing the template parts. Are there any other template processing systems that support real object-oriented development of dynamic content-generation applications?

By an amazing coincidence, the domain name jplates.com is registered to a Daniel Jacobs and your user name is djacobs. What are the odds of that?
If you're going to plant commercials, you need to disguise them better than this.

How to configure and test workflow for Creating Leave Request

Hi,
When I select leave request iView in portals I get an R/3 screen titled "Create Leave Request".And when I fill in the details for approver and press send I get this error message "You are not one of the possible agents of the task".
So help required to configure and test the workflow behind Create leave request iView.
Regards,
Pavanmeet.

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

How to configure and test workflow for Creating a leave Request?

Hi,
When I select leave request iView I get an R/3 screen titled "Create Leave Request".And when I fill in the details for approver and press send I get this error message "You are not one of the possible agents of the task".
So help required to configure and test the workflow behind Create leave request iView.
Regards,
Pavanmeet.

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

MDG-Hub: Tried and tested methods for ECC customizing synchronization

Similar Messages

Maybe you are looking for