MDG Material BS_MAT_OVP_03 application is fine in development but giving runtime errors when moved to quality
Dear Experts,
We are Facing a problem with BS_MAT_OVP_03, We have done some enhancements and it is working very much fine in development and when we move it to Quality we are getting runtime errors, they are not with the enhancements but with in standard code itself.
"ASSERTION_FAILED" " ""CL_USMD_ACC_FLD_PROP_DATA=====CP" or "CL_USMD_ACC_FLD_PROP_DATA=====CM009" "VALIDATE_RETURNED_FLD_PROP"
we are getting above runtime error, Please let us know the reason for issue, If some one have come across.
Regards
Sukumar
Hi Sukumar,
It's because of few generated structures could be in "Inactive" mode for your data model when you move to quality system.
Refer each generated structure from SE11 and activate them individually..this can be a post processing activity everytime you move data model structures from one ECC to other ECC.
Thanks
Praveen
Similar Messages
-
I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer -
Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:? -
Query working fine in 9i but throwing an error in Oracle 10g
Hi All,
I am having a query which contains large number of When clauses inside a case statement.
The Same SQL is working fine in 9i, but not working in 10G.
If we try to remove one of the When clause in the query, its working fine else it is giving the error ORA-00939 Too many arguments for functions.
Can any one tell me the solution for this and what is the maximum number of when clauses allowed inside case statemen in oracle 10g.
Thanks in advance
Regards
Karthikit should not have worked in 9iR2... it is correct according to the doc to return an error message when using more than 255 expressions...
SQL> select version from v$instance;
VERSION
9.2.0.7.0
SQL> select case 1
2 when 2 then 3
3 when 4 then 5
4 when 6 then 7
5 when 8 then 9
6 when 10 then 11
7 when 12 then 13
8 when 14 then 15
9 when 16 then 17
10 when 18 then 19
11 when 20 then 21
12 when 22 then 23
13 when 24 then 25
14 when 26 then 27
15 when 28 then 29
16 when 30 then 31
17 when 32 then 33
18 when 34 then 35
19 when 36 then 37
20 when 38 then 39
21 when 40 then 41
22 when 42 then 43
23 when 44 then 45
24 when 46 then 47
25 when 48 then 49
26 when 50 then 51
27 when 52 then 53
28 when 54 then 55
29 when 56 then 57
30 when 58 then 59
31 when 60 then 61
32 when 62 then 63
33 when 64 then 65
34 when 66 then 67
35 when 68 then 69
36 when 70 then 71
37 when 72 then 73
38 when 74 then 75
39 when 76 then 77
40 when 78 then 79
41 when 80 then 81
42 when 82 then 83
43 when 84 then 85
44 when 86 then 87
45 when 88 then 89
46 when 90 then 91
47 when 92 then 93
48 when 94 then 95
49 when 96 then 97
50 when 98 then 99
51 when 100 then 101
52 when 102 then 103
53 when 104 then 105
54 when 106 then 107
55 when 108 then 109
56 when 110 then 111
57 when 112 then 113
58 when 114 then 115
59 when 116 then 117
60 when 118 then 119
61 when 120 then 121
62 when 122 then 123
63 when 124 then 125
64 when 126 then 127
65 when 128 then 129
66 when 130 then 131
67 when 132 then 133
68 when 134 then 135
69 when 136 then 137
70 when 138 then 139
71 when 140 then 141
72 when 142 then 143
73 when 144 then 145
74 when 146 then 147
75 when 148 then 149
76 when 150 then 151
77 when 152 then 153
78 when 154 then 155
79 when 156 then 157
80 when 158 then 159
81 when 160 then 161
82 when 162 then 163
83 when 164 then 165
84 when 166 then 167
85 when 168 then 169
86 when 170 then 171
87 when 172 then 173
88 when 174 then 175
89 when 176 then 177
90 when 178 then 179
91 when 180 then 181
92 when 182 then 183
93 when 184 then 185
94 when 186 then 187
95 when 188 then 189
96 when 190 then 191
97 when 192 then 193
98 when 194 then 195
99 when 196 then 197
100 when 198 then 199
101 when 200 then 201
102 when 202 then 203
103 when 204 then 205
104 when 206 then 207
105 when 208 then 209
106 when 210 then 211
107 when 212 then 213
108 when 214 then 215
109 when 216 then 217
110 when 218 then 219
111 when 220 then 221
112 when 222 then 223
113 when 224 then 225
114 when 226 then 227
115 when 228 then 229
116 when 230 then 231
117 when 232 then 233
118 when 234 then 235
119 when 236 then 237
120 when 238 then 239
121 when 240 then 241
122 when 242 then 243
123 when 244 then 245
124 when 246 then 247
125 when 248 then 249
126 when 250 then 251
127 when 252 then 253
128 when 254 then 255
129 when 256 then 257
130 end x from dual;
X
SQL> select version from v$instance;
VERSION
10.2.0.2.0
SQL> select case 1
2 when 2 then 3
3 when 4 then 5
4 when 6 then 7
5 when 8 then 9
6 when 10 then 11
7 when 12 then 13
8 when 14 then 15
9 when 16 then 17
10 when 18 then 19
11 when 20 then 21
12 when 22 then 23
13 when 24 then 25
14 when 26 then 27
15 when 28 then 29
16 when 30 then 31
17 when 32 then 33
18 when 34 then 35
19 when 36 then 37
20 when 38 then 39
21 when 40 then 41
22 when 42 then 43
23 when 44 then 45
24 when 46 then 47
25 when 48 then 49
26 when 50 then 51
27 when 52 then 53
28 when 54 then 55
29 when 56 then 57
30 when 58 then 59
31 when 60 then 61
32 when 62 then 63
33 when 64 then 65
34 when 66 then 67
35 when 68 then 69
36 when 70 then 71
37 when 72 then 73
38 when 74 then 75
39 when 76 then 77
40 when 78 then 79
41 when 80 then 81
42 when 82 then 83
43 when 84 then 85
44 when 86 then 87
45 when 88 then 89
46 when 90 then 91
47 when 92 then 93
48 when 94 then 95
49 when 96 then 97
50 when 98 then 99
51 when 100 then 101
52 when 102 then 103
53 when 104 then 105
54 when 106 then 107
55 when 108 then 109
56 when 110 then 111
57 when 112 then 113
58 when 114 then 115
59 when 116 then 117
60 when 118 then 119
61 when 120 then 121
62 when 122 then 123
63 when 124 then 125
64 when 126 then 127
65 when 128 then 129
66 when 130 then 131
67 when 132 then 133
68 when 134 then 135
69 when 136 then 137
70 when 138 then 139
71 when 140 then 141
72 when 142 then 143
73 when 144 then 145
74 when 146 then 147
75 when 148 then 149
76 when 150 then 151
77 when 152 then 153
78 when 154 then 155
79 when 156 then 157
80 when 158 then 159
81 when 160 then 161
82 when 162 then 163
83 when 164 then 165
84 when 166 then 167
85 when 168 then 169
86 when 170 then 171
87 when 172 then 173
88 when 174 then 175
89 when 176 then 177
90 when 178 then 179
91 when 180 then 181
92 when 182 then 183
93 when 184 then 185
94 when 186 then 187
95 when 188 then 189
96 when 190 then 191
97 when 192 then 193
98 when 194 then 195
99 when 196 then 197
100 when 198 then 199
101 when 200 then 201
102 when 202 then 203
103 when 204 then 205
104 when 206 then 207
105 when 208 then 209
106 when 210 then 211
107 when 212 then 213
108 when 214 then 215
109 when 216 then 217
110 when 218 then 219
111 when 220 then 221
112 when 222 then 223
113 when 224 then 225
114 when 226 then 227
115 when 228 then 229
116 when 230 then 231
117 when 232 then 233
118 when 234 then 235
119 when 236 then 237
120 when 238 then 239
121 when 240 then 241
122 when 242 then 243
123 when 244 then 245
124 when 246 then 247
125 when 248 then 249
126 when 250 then 251
127 when 252 then 253
128 when 254 then 255
129 when 256 then 257
130 end x from dual;
when 16 then 17
ERROR at line 9:
ORA-00939: too many arguments for function
SQL> del 129
SQL> /
X
---------- -
I've just subscribed to Acrobat Pro. Application manager is on desktop, but no Pro. When I open a PDF to edit, it's just Reader. What do i need to do to get the Pro?
Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/ -
Hi all,
I get the following error when using "Discover" to import dimensions in endeca develoepr studio
This application has requested the Runtime to terminate it in an unusual way.
Has anyone else encountered this issue?Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim -
Application works fine in Preview but doesn't play on iPhone?
I finally decided to purchase a Developer license to start testing performance of my game on my actual iPhone. My game works perfectly on my computer, however I published to my iPhone and when it loads, it shows the graphics of the game but it is as if the game never starts. It is just frozen on the first frame of the game.
I've tried doing a remote debugging session but it won't connect for some reason. I'm on the same wifi network, I've published from Flash using the Quick for Debugging option. When I load the game, it freezes on the first frame and doesn't ask for the IP of my computer (which is supposed to happen on debugging right?)
What should I try from here?I got debugging working: I'm getting an error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error.
It corresponds with the first line of these three lines:
loop = new Sound();
loop.load(new URLRequest("hitit120.mp3"));
loop.addEventListener(Event.COMPLETE, startMusic);
I've included the mp3 file in the iphone included files publishing setting... Although what is weird is the stream error happens on the first line, before I even try to load the mp3.. -
RFC Lookup error after moving to Quality from Development
Hi All,
For a scenario,I am using the RFC Lookup in message mapping.
I am not using it in a UDF but for directly for an target element....
The scenario was wrkng properly in development... but in quality it's not wrkng giving the following error....
RuntimeException during appliction Java mapping com/sap/xi/tf/_ABC_DEF_GHI_JKL_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter ISU_RFC_Receiver does not exist. at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:148) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:620) at
The design part and Config part are done properly..
1.Message mapping-->Parameters (given the CC Name)
2.Operation mapping-->Binding (The binding parameters is specified)
3.In the interface determination.... choosen the Parameter for Operation mapping...
But still i am getting the above error..
Did any1 face the same prblm ever??? If yes may i know how u resolved???
Any inputs or suggestions is appreciated...
BabuHI Michal,
I checked it thtz fine the same objects are transported to Quality without any modification...
But Still i am getting the same proble..
Any other inputs????
Babu
Edited by: hlbabu123 on Apr 8, 2010 7:54 PM -
JSF page shows runtime error when application deployed in local oc4j server
I developed a wsrp portlet producer based application and delployed it in oc4j application server. But when I open input.jsp page url which has JackBe portlet mashlets on it in web browser.
I get an error 'mdsId=/oracle/adf/portlet/wsrpPortletProducer1_1223631729156/ap/E1default_e62a8fe5_011e_1000_8002_ac144d7e5e23.pxml not found'.
Oc4j, oracle database instance and JackBe presto are running on same local machine.
I am using trial version of JackBe presto. Similarly while installing oc4jpdk, I do need to change ORACLE_HOME path to oc4j from oracle database folder which stops running of my oracle database(Oracle10g) instance on my machine. Please suggest me with possible solution pointers to resolve it.Hi
Thanks for the input. I checked at the forum you referred to. I did not find any similar question discussed on the forum. I highly appreciate if you suggest me few exact pointers to this issue. I am losing on time and appreciate quick response.
Thanks & Regards
Abhijit Kulkarni -
Plugin working fine on CS6 but giving issues in CC 2014..
Hi
I have developed an automation plugin and it is working fine till CS6. For CC 2014, it works fine on my machine but on other machines it gives errors like "Cannot flatten, or cannot rotate".. Can you please guide me for this behaviour of CC and what I should do to fix this?
ThanksRe: Source Sans Pro not displaying in 'Design' mode
This did the trick for me. Thanks D Dog! -
Analytical function fine within TOAD but throwing an error for a mapping.
Hi,
When I validate an expression based on SUM .... OVER PARTITION BY in a mapping, I am getting the following error.
Line 4, Col 23:
PLS-00103: Encountered the symbol "OVER" when expecting one of the following:
* & = - + < / > at in is mod remainder not rem then
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
However, using TOAD, the expression is working fine.
A staging table has got three columns, col1, col2 and col3. The expression is checking for a word in col3. The expression is as under.
(CASE WHEN SUM (CASE WHEN UPPER(INGRP1.col3) LIKE 'some_value%'
THEN 1
ELSE 0
END) OVER (PARTITION BY INGRP1.col1
,INGRP1.col2) > 0
THEN 'Y'
ELSE 'N'
END)
I searched the forum for similar issues, but not able to resolve my issue.
Could you please let me know what's wrong here?
Many thanks,
Manoj.Yes, expression validation in 10g simply does not work for (i.e. does not recognize) analytic functions.
It can simply be ignored. You should also set Generation mode to "Set Based only". Otherwise the mapping will fail to deploy under certain circumstances (when using non-set-based (PL/SQL) operators after the analytic function). -
SQL Developer Bug: NVL() function error when debug/run stored procedure
Version:
SQL Developer: 1.5.3 (build main-5783)
Oracle DB connected: Oracle9i Enterprise Edition Release 9.2.0.6.0
Stored procedure code like this:
procedure search(V_STATUS_IN IN CHAR(1)) is
begin
declare
V_STATUS CHAR(1) := NULL;
begin
V_STATUS := NVL(V_STATUS_IN, '%'); -- error line
end;
end;
The stored procedure runs well (I mean no oracle exception) when called through Java code (and in TOAD). But when debug/run in SQL Developer, following error at the error line:
$Oracle.EXCEPTION_ORA_6502:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
--------------------------------------------------*/What parameter are you passing in? It is possible you are trying to cram a multibyte character into a singlebyte container. What are the nls settings for the database and for sqldeveloper?
-
Code working fine in Enterprise version giving syntax error in Rel 4.6C
Hello All,
<b>Consider the following piece of code.</b>
FORM fill_itabs TABLES p_t_table
p_t_table_dummy.
Internal table to be used for dynamic where condition
DATA: lt_wherecond TYPE STANDARD TABLE OF ty_wherecond,
Structure for dynamic where condition
ls_wherecond TYPE ty_wherecond.
p_t_table_dummy[] = p_t_table[].
REFRESH lt_wherecond[].
CLEAR ls_wherecond.
ls_wherecond-data = 'kunnr = p_t_table_dummy-kunnr'.
APPEND ls_wherecond TO lt_wherecond.
SELECT kunnr INTO TABLE gt_kunnr
FROM kna1
FOR ALL ENTRIES IN p_t_table_dummy
WHERE (lt_wherecond).
ENDFORM.
This is working fine in Enterprise version, but when I am trying the same in Rel 4.6C, I am getting a syntax error at the Select statement which states,
"The WHERE condition does not refer to the FOR ALL ENTRIES table.-"
Could anyone please suggest how to avoid this error?
Regards
IndrajitHi Chemmam,
yes, that will be a version problem. The general rule says, always use the NWDS corresponding to your server, and the main reason are the differences within the webdynpro implementation.
So if you have a 6.40 with SP13 for example, use NWDS 2.0.13 as the base of your deployment.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance! This also holds for: /thread/80658 [original link is broken] -
Runs fine in preview, but doesn't work when burned
I've been running into a few nagging problems on iDVD 6...
When I preview what I've assembled in iDVD, it runs as intended -- an autoplay intro movie, then to the main menu.
When I've burned it to DVD, it starts with the intro movie, but then goes into a submenu instead of the main menu.
Any possible advice on what could be causing this?Welcome to the forums.
In terms of a sequence, is it possible you added the submenu movie to the project before adding the movie starting from the main menu? In other words, iDVD normally plays movies in the order they are added to the project (the buttons are links to the movies which can be cut and pasted to different menus).
John -
Ant help appreciated!
I would try re-installing LR 2.7 and then looking for your catalog under File->Open Recent
Maybe you are looking for
-
Unable to use Intel 530 SSD with M5400
Hello! I finally decided to write over here, after reading and viewing a lot of forums lately on this subject. Context: I have an Lenovo M5400 (but don't think this is definitory to the problem, as I've seen that the same simptoms seem to exist to
-
Nike+ not syncing with iTunes
I just started using my nike+ this morning. When I tried to sync with iTunes, although there is a Nike+ tab, none of the data synced. Any idea what the problem might be? I tried searching the forums on Nike, but couldn't find anything. Thanks!
-
Strange problem with Subviews on 1.0 Beta
Hi, I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here. My application is directly based on one of the examples, so the structure etc is almost identica
-
Deploying MDB in a cluster...
Have any one been successful at deploying a Message Driven Bean in a cluster. The problem I am running in to is that on the second machine the MDB tries to deploy but does not find the name of the queue in the JNDI space
-
Complete Newbie with Organizing Question
Please understand that I'm a complete Neophyte at Mac, and iPhoto. Please respond accordingly. I'm a Windows guy who has succumbed to the intrigue and mystery of the Mac. I've got the Intel Dual Core iMac with 250GB HDD and 1 GB RAM. I just got it le