MDIS don't import automatically

Hi to all.
i want to automate import to the MDM Repository via XML files
i have some XML files and XML Schema
there are my steps:
-at first i've created map between XML Schema and table from MDM Repository [Here my mapping|http://www.imgstore.ru/files/8kBOJDlUMcMRUC871IWAd0lntlgXwJ2lHyJYmT5L.png]
-after that i've matched that at [next sheet of the Import Server|http://www.imgstore.ru/files/C1tZVBiFWDmLnOsCAAjbnevNzz9IVqpDGCrTj6za.png] and set Default Import Action
-after that i've saved map [here is status sheet|http://www.imgstore.ru/files/u5s1d2cdE9t6KRS0RmoBT13k8U60TCoXcu6iQhgO.png]
then i go to MDM Console and configured [Port for Import|http://www.imgstore.ru/files/XCCsDIel40WDDjKqBT94YCoY47vSbK04N12mJjwu.png]
after all i put at port folder one XML file (U can check it at Port Status - Has Data )
MDIS is running and in mdis.ini there is Interval=15 but he didn't import automatically
if i Connect MDM Import Manager to Port and press Execute everything imported right and XML file moved from Ready to Archive folder.
Did smb faced with such problem?
May be i forget smth in map?
Thx in advance.

Hi Mike,
Is the MDM import Server service started?
If it is not then just start the service for import server via Administrative tool.
then import server automatically pich up the file from the ready folder of the inbound port.
Hope this will help you.
Regards,
Saurabh..
Reward with points if found helpful.

Similar Messages

Oracle 8.1.7 on windows 2000 don't start automatic :(

Why Oracle 8.1.7 don't start automatic on windows 2000 :(
Services
Oracleora3Agent
Oracleora3DataGatherer
Oracleora3TNSListener
OracleServiceORA3
are started autamatic. (ora3 is SID)
if I execute command "startup open" in Server Manager (svrmgrl), then DataBase started

I've got the same problem.
However, I've found that if I set the OracleServiceXXX startup to manual, If I then issue a net start statement it works OK.
i.e NET START OracleServiceXXX
Hope this helps.

HT1918 I don't want automatic payment for Pandora. How do I change it?

I don't want automatic payment for Pandora. How do I change it?

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

Itunes 5014 don't import song from CD

I've just installed new itunes sw, and it don't import CD.
It imports only 9 seconds for track and then skip to the next...Why? Solutions?

Perhaps it depends on the CD, because no one of my colleague may read it on their PC. I don't have another one to prove it.
The CD has some extra-media contents...perhaps it is the problem.

How to set a job to import automatically transport requests

I wander how to set a job to import automatically transport requests

Hi jan Bo,
http://help.sap.com/saphelp_erp2004/helpdata/EN/44/b4a3c57acc11d1899e0000e829fbbd/frameset.htm
Usung above link you can schedule a transport, if you schedule this job a back ground job will be defined copy this job and create a new varient with your transport request. Make this job run after the back ground job you want.
Regards,
S.Manu.

Downloaded files don't open automatically

why most of files, Word, Excel and many other don't open automatically on desktop after downloading them, is very irritating to go and search all the time
Thanks for help

Ferro wrote:
... is very irritating to go and search all the time
You don't need to search for them. When you download a file, the Safari Downloads window opens automatically. After the file has finished downloading, double-click on its icon in the Downloads window to open it directly. Also note that you can go to its location by clicking on the magnifying-glass icon to the right. This will open a Finder window with the file selected – handy if you want to delete it or move it to another location.
As Mulder points out, some files (such as MS Office files) will never open automatically, because doing so could be unsafe for your computer. But files that are considered "safe" will open automatically if you have the right option selected in your preferences: Safari > Preferences > General, check the box next to "Open 'safe' files after downloading."
Message was edited by: Rachel R

Photos don't import

i tunes syncs my music correctly, imports cds, etc but MY PICTURES will not import, even though boxes are checked under PHOTOS.
using latest itunes 8.1

You don't import photos into iTunes. iTunes is simply used to choose the folder or album on your computer that contains photos that you want to sync to your iPod.
Here's a simple "How To" on downloading and managing photos from a folder on your hard disk to an iPod:
1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
2 Drag the photos you want from your usual picture folder into the folder you just created
2 Open iTunes, select your iPod in the iTunes Source list.
3 Click the Photos tab and select “Synch photos from.”
4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
5 When you want to change what photos are on the iPod just add or remove the photos from the folder you have made and syncronise the the iPod

Components don't start automatically, is that normal?

Hi
I installed the 9iAS R2 Portal Server, both the infrastructure and the portal.
I understood that the components should start automatically. I'm talking about the following comps:
-Internet Directory
-HTTP Server
-OC4J_DAS
-HTTP Server
-OC4J_Portal
-OC4J_Wireless
-Single Sign-On:orasso:7777
-Portal:portal:7778
-Web Cache
-Wireless
However, they don't start automatically. Or at least, they don't do fast enough and I'm assuming they don't do at all. So I'm starting them manually and that takes time.
Should they start automatically or not?
TIA,
Brian

It depends on your platform. For Linux, UNIX and HP-UX, I am almost sure that these services need to be manually started after machine startup - unless of course (in the case of Linux) you have these start up scripts written and part of the /etc/init.d directory from where it is invoked at time of start up.
Re: your comment about it being funny that you should know this since you teach a portlet class for Oracle University......Oracle Univ Education is very pricey I would hate to think that I am attending a class where the instructor is not up to snuff on such basic matters.
Message was edited by:
mathewjn

I need that Adobe reader don`t update automatically.

Good Afternoon
In My company actually have problems with the Adobe reader update, we had worked in various solutions for example , in the program option Edit/preferences option update and check in No download.... other was program files/common files/Adobe/ rename the folder update with other character or other name.
this solutions was not succesfull , I have the problem yet.
I need help with this situation because my data channel is not working correctly, my users have problems.
If somebody know about one solutions please help me!
I need that Adobe reader don`t update automatically.
Have good day!

If you have a Windows Domain environment in your company and domain controllers are Windows 2008/2008 R2, than you can use this Grou Policy Templates: https://sourceforge.net/projects/customadmx/
They are capable of switching auto updates off.

My clips don't import in order, how do I make them stay in order?

When I drag a large number of pictures into iMovie (to make a stop-motion video), the order gets all mixed up! How do I stop this from happening?

I have noticed that sometimes when I drag a number of photos into the timeline, the first one in the group gets put in a different spot, usually at the end. I don't know why it happens, and it doesn't seem to have a pattern of occurrence. I just have to check carefully to see where the first photo went. I think iMovie gets easily overloaded and so I don't import over about 60 photos at one time.

Older PSD and Tif files don't import

I know I have seen this on the forum, but I could not find it. I am importing all of my archives into Aperture. Some older PSD and Tiff files (pre 2000) just don't import. No warning. Just missing files. This is a bit scary as I can't go through all of the folders 1 by 1 to see what is missing. Is this a known bug....any work arounds. Thanks
mac book, Dual 2gig G5 Mac OS X (10.4.8)

Maybe. But, frankly, Aperture is not a PSD archiving and workflow appliation. It is a photographic workflow application. Adobe, by nature of having written Photoshop, probably has better support for old Photoshop formats than does Apple.
If you really need to import 40,000 PSD files into something, I would suggest Aperture is not the best tool for you. You want an asset manager or something that specializes in archiving/search. Aperture's raison d'etre is RAW photos, you know, that come from a camera.

Chrome favourites, added to safari, don't update automatically

Recently Safari allowed me to add Chrome favourites to Safari's, however they don't update automatically when I change them in Chrome. How do I fix the problem? Thanks

Your issue peaked my curiosity, so a ran a small experiment with some routers which I had handy ... a 802.11n AirPort Extreme Base Station (AEBSn), a Linksys BEFSR81, and a Netgear WGR614.
I rotated them, in turn, to a Motorola SB5101 cable modem provided by my ISP -- Cox Communications. For each case, I left the default settings on the routers which, in all cases, they were set as DHCP clients. For each case, the DNS IP information, provided by the ISP, was NOT visible on the Basic Settings page for any of these routers. However, they were ALL visible when viewing the equivalent router's status pages. For the AEBSn, that would be the Internet > Internet Connection tab in the AirPort Utility; For the Linksys, that would be the Status > Router tab; For the Netgear, that would be the Maintenance > Router Status.
In addition, I confirmed that each of the routers "passed thru" the ISP DNS server information to their LAN clients (wired or wireless) that were set up as DHCP client (& for WinXP or Vista clients to receive DNS info automatically.) (Note: I used the ipconfig utility for both Windows & OS X clients.)
So, this leads me to believe that what you are seeing is normal behavior of the router. If your ISP changes their DNS server(s), this should also "pass thru" to your LAN clients. If this is not happening then either the router is set for a static DNS IP address or the client is. I'm not sure what else it would be.

Composite effect don't start automatically with KDE4

hi,
so far so good my new Arch + KDE4 is running pretty stable, pretty good and wonderfully fast. However I have this [minor] issue of Compositte effect don't starting automatically with KDE4 log-on, I need to press Ctrl+Shit+F12 twice to activate it after all applications and Nepomuk loads or else I'll have a Plasma crash - which will reload itself with no significant issue to system stability.
KDE installed are plain KDE packages, not meta and my video card is a ATI HD5750 running latest 10.4-beta catalyst driver.

Some preferences are no longer there. Someone has posted a way to use Terminal to get the missing preferences. Check this: http://discussions.apple.com/thread.jspa?threadID=1706604&tstart=105

LR 4.2: "Don't import suspected duplicates" fails repeatedly

After import from CF card, then next import with "don't import suspected duplicates'' checked, failed many times. You must close and reopen the import window, repeating the operation (one or two times) to make it work properly.

Victoria Bampton wrote:
CuriousBystander wrote:
So what you are saying is this:
if filename equals "existing" AND date/time equals "existing" AND file size equals "existing" THEN its a match.
Yep. And I agree it needs to be better. You might want to add a feature request at the Official Feature Request/Bug Report Forum
At the risk of necroing a thread, I want to disagree that "it needs to be better" if that translates to "ignores files with small differences in the filename but otherwise the same." From the standpoint of file management, we never, ever want software thinking about this too much. I have encountered multiple situations where i was able to recover from a corrupt file precisely because the software was extremely strict on what it considered to be a duplicate. Put differently, it does not hurt us to have two copies of an important photo, while it can be devastating to have no copies—or one corrupted copy—of an important photo. When importing hundreds or thousands of shots, we absolutely want Lightroom insisting that filename, sixe, and capture date/time be identicial to be considered a duplicate. Otherwise, we want these sorts of decisions left to us. After all, there is a reason that file is different, and it could well be that an atuomated process elsewhere failed and two copies of photo allows us to choose what was the correct image to retain.
Again, sorry for the necro, but I felt this needed to be said.

My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?

My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?
I don't want to have to restart or reinstall my iTunes again as I'll have to redo all my playlists etc

Likely that CD then. Check visually for damage, blemishes, etc., not that there's anything you can really do about those other than return the CD.
The drive sits there and spins because it is trying to re-read the CD. iTunes has error correction which is contributing to all this re-reading, I believe, and you may be able to disable that in preferences if you aren't picky about the result.
You can also try other rippers such as Max or XLD. I know those have configurable error correction. I like XLD but it is slightly tricky to use until you find that for some reason the author has put all settings under preferences, not just the set once and forget ones.

MDIS don't import automatically

Similar Messages

Maybe you are looking for