MDIS - Structural Exception

We are using SAP MDM 5.5. SP6
We are having some issues with our development repository. This repository is not used every day but when we have some testing this is used.
While using MDIS and loading the files, some files will to go exception -> StructuralX  folder.  When I looked at the console -> Reports, the message was  
u201CSome portions of this import map are out of date. Solution: Please, Launch the Import Manager GUI, preferably using the original source file that the map was generated for, otherwise the same source file and Save Update [File->Save Update] the mapu201D
When I use the exception file in the Import manager File->Save Update this file works. But same issue was there with some other file. If we use same File->Save Update for that file then it works.
This issue is not with every files but some files and they are in exception.
What is the permanent solution to this problem?. This issue was not there earlier. We canu2019t handle manually every files has this issue
Steve.

Hi Steve,
This is true that Save Update option Saves an update of the current map.
This issue is not with every files but some files and they are in exception.
I would suggest, say you have single file in structure exception folder, take a copy of this file and put it on desktop. So that you have same two files one in exception folder and other on your desktop. Now open file which is in structure Exception folder with MDM Import manager using Port(Exception) and Remote System. Now after mapping missing fields and values go for SAVE UPDATE option so that it saves the update of the current map.
Now take a copy of this desktop file and put it there in Ready folder and check is it going to import successfully or still going to exception folder using MDIS. If it is still going to exception folder then open this same file with Import Manager using option open existing map and go for SAVE option rather than SAVE UPDATE, this will overwrite your this existing map with this new map. Make sure that this exception file contains all the fields which were present earlier. On a safer side, you can go for SAVE option but not on the existing map but can do file save as New Map so that your existing map does not effected. Now using console give this new map name in your port and check. This will resolve your problem.
Regards,
Mandeep Saini

Similar Messages

  • MDIS blocking XML files with Structural exceptions

    Hi,
    I am importing Article master records into a repository with MDIS. The files are blocking with structural exceptions. I can import the same files fine with the Import Manager - only some extra value mapping has to be done. I have set to MDIS to perform automatic addition of unmapped values, the port is set using the correct map, it is set to inbound and it is using the correct schema for the article records.
    Any files that do not import with the MDIS can be imported with the Import Manager. Any ideas?
    Thanks,
    Keith
    Pts generously rewarded for helpful answers.

    Hi Keith,
    I can see only one cause of the problem taht you are facing.
    Probably for the "value mapping" you can make it automatic by setting the MDIS.
    You will have to set it as:
    1. Automap Unmapped value-- YES
    2. Always use Unmapped Value handling- ADD ( this is for adding values which cant be mapped as there as no such values present in MDM).
    Kindly let me know if the problem still prevails...
    Thanks,
    Nitin jain.

  • Structural Exception

    Hi All,
    When does structural exception occurs in MDM?
    Could you please tell me what are the possible caes for structural exception ?
    Thanks,
    Narendra

    This exception occurs in MDIS with import map when the XSD or elements of XSD are not correct
    Refer this link for more information -
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c01c5cb1-7226-2c10-9583-9455b03cb7ba?overridelayout=true
    Regards

  • Structural Exception During Auto Imports In MDM

    Hi All,
    We are facing a problem while auto importing bulk data.
    System is throwing structural exception and preventing data from importing automatically.
    Is there any way that we could identify which segment in XML is causing this structural exception?
    Also if we try to import data manually by loading the XML file, system throws a message "Unknown Exception".
    Is there a possibility that some data in XML will be causing this problem?
    Kindly provide your valuable inputs. Thank You.
    Regards,
    Ankush Bhardwaj

    Hi,
    I have checked the settings for the Port and Block on Structural Exception is already set to Yes.
    And Save Update did not help either.
    Apart from this, Log files for MDIS server points to some error saying ImportRecordSliceInternal471.
    So we are now trying to change Slicing Parameter for Import in MDS.ini and see if it still throws exceptions or not.
    Please suggest if i could try some other thing also.
    Also i have one question as to if this problem could be due to the Data in the XML file because we have so many qualified Table links to be updated along with Main table record values?
    Thank You.

  • Structural Exception.. Urgent

    Hi MDM Experts,
    I have a situation over here wherein I am trying to use the Automatic Import for a XML file through an XML Schema.
    XMl Xchema and the port have been mentioned in the port settings. Everything else has also been configured.
    But when I place a file in ready Folder it moves into the Structural Exception Folder.
    And if I Open the same file through Import Manager Via XML Schema, it shows me, ready to import.
    Can somebody tell me, what can be the reason of file moving into Structural Folder. And how should i correct it ?
    Please note: The Schema is working fine with Import Manager but not with MDIS.
    Help will be appreciated.
    Thanks and regards
    Nitin Jain

    See Error handling in Help.sap.com for MDM:
    http://help.sap.com/saphelp_mdmgds55/helpdata/EN/dd/a0eca720ce47ef91be87fe7e6f6e1d/content.htm
    http://help.sap.com/saphelp_mdmgds55/helpdata/EN/16/fbe28d652c4280a006b2870af2a83e/content.htm
    http://help.sap.com/saphelp_mdmgds55/helpdata/EN/c4/ef067c42dc44eaa3688932b0927215/content.htm
    How to Fix??
    http://help.sap.com/saphelp_mdmgds55/helpdata/EN/e0/6b2eb7d399469bb4235cc8d3dc3529/content.htm
    BR,
    Alok

  • Port Blocked on Structural Exception

    Hi All,
    I am facing one issue in which Inbound Port for auto imports is getting blocked.
    Error message in the logs is "CR: 0x80010000 Out of Memory".
    Can anyone please throw some light regarding this message and let me know what this means?
    This is a Verbose message and setting 0x800 is used for keeping track of ImportX.
    Then why is the port blocked on Structural Exception?
    Thank You.

    Hi Ankush,
    It seems there is a high load on MDS causing the first error.
    Try connecting through IM manually for the same record.
    Also,if there is high data influx it is advisable to optimise port and MDIS parameters accordingly.
    I did not get what is your second question but if you are asking why does the port block on structural Exception,then thats a setting which you can or not.But i have seen having exceptions in StrucX badly affects import process.
    Also error  0x800 is also related to server being very busy,that may be the case here.
    Thanks,
    Ravi

  • Copy structure except 1 field using xslt

    Hi,
    I want to copy the whole  structure except 1 field using xslt.
    or
    I want to check for filed name starts with function
    I have E1EDK01 segment, i want to copy everything except BELNR.
    Please suggest
    Thanks,
    Varun

    Hi,
    What is your Exact requirement.....ru using <xsl:copy-of> function in the mapping and u want mapping except one field then it is not possible.......copy of function is used when the complete structure is 1-1 mapping.
    if my under standing is wrong on ur requirement...then pls explore ur requirement.
    Regards,
    Phani

  • Structural Exception thrown during Automatic Import in MDM

    Hello Experts,
    While importing material records automatically MDM throws a structural exception. When i try importing the same exception file using Import Manager Import status=Ready for Import and the records are imported successfully.
    The same Import map and properties when applied on the TEST environment also works properly for both Automatic and Manual import.
    Can anyone advice a solution to this.
    Thanks in advance,
    Elizabeth.

    Hi Jacob,
    Just check your source file if any new segment occur or segment value is repeating but ideally it should not because in manual import it will work by ignoring this value where during automiz it gives an error
    Also i  mention in previous thread provide us MDM server log details snaps  when structural exception occure along with date and time information so based on log detail we can provide suggestion
    Thanks,
    Jignesh Patel
    Edited by: jignesh patel on Aug 20, 2010 1:43 PM

  • Critical Structure Exception BSOD

    Hello
    I am getting a BSOD stating only Critical Structure Exception. Since I dont think I have virtualbox or that hardware accelerator thingy that causes it, I need support. If only I knew how to upload my .dmp's to this topic...
    https://dl . dropboxu  sercontent . com /u/39719029/012114-48125-01 . dmp
    above is a makeshift url (because for some reason I both cannot upload my dump files or place links... great =/) to my most recent dumpfile

    Hi,
    Here is the analysis results:
    Debugging Details:
    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
    BUGCHECK_STR: 0x109
    PROCESS_NAME: System
    CURRENT_IRQL: 2
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) x86fre
    STACK_TEXT:
    ffffd000`26446088 00000000`00000000 : 00000000`00000109 a3a01f58`927a3564 b3b72bde`e4f96b23 ffffe000`010d6ed0 : nt!KeBugCheckEx
    STACK_COMMAND: kb
    SYMBOL_NAME: ANALYSIS_INCONCLUSIVE
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: Unknown_Module
    IMAGE_NAME: Unknown_Image
    DEBUG_FLR_IMAGE_TIMESTAMP: 0
    IMAGE_VERSION:
    BUCKET_ID: BAD_STACK
    FAILURE_BUCKET_ID: BAD_STACK
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:bad_stack
    FAILURE_ID_HASH: {75814664-faf6-4b70-bbc7-dc592132ecdd}
    Bug Check 0x109: CRITICAL_STRUCTURE_CORRUPTION
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff557228(v=vs.85).aspx
    Please try the memory diagnostic tool and disk checker to see whether your issue can be fixed.
    Kate Li
    TechNet Community Support

  • Import server - Structural exception

    Hi All,
    I configured all the necessary setting required for Import server.I manually placed the file in Ready folder.The file gets processed but goes and sit in exception folder under structural folder.
    I tried the same file using Import manager and and dot loaded in DM without any error.I checked all the fields and structure but unable to find the solution.
    I am getting the following error showing some timestamp.There are no fields in may main table using timestamp .our design has only literal date and time in tuple.Is this something to do with this?
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <File>
      <ExceptionSubFolder>E:\usr\sap\MD1\MDS00\exe\Distributions\HYDHTC100401D_MSQL\Sachin\Inbound\MDM\MRH2_MAP_AUTO\Exception\StructuralX\</ExceptionSubFolder>
      <Name>20110721084955_S_MRH2_Customer_Master_Data.xls</Name>
      <ExceptionType>StructuralX</ExceptionType>
      <TimeStamp>20110721084955_S</TimeStamp>
      </File>
    Can any one help me in this ?
    Thanks and Regards
    Nitin

    Hi,
    Thanks for the help.
    I clicked on  the below link.But please clarify which one to download from below.Which one from below contains xsd.exe
    What is xsd.exe used for.Is it some kind of tool to create xml files.Please need some information.Because if it is a tool i am using Altova XML spy for the same
    Download .NET Framework 2.0 SDK x86 version (354 MB)
    Download .NET Framework 2.0 SP2 (52 MB )
    Thanks and Regards
    Nitin
    Edited by: nitin shanbhag on Jul 25, 2011 5:23 AM

  • Where I can get hyperlinks in pdf document structure (except "Annots" entry in page dictionary)?

    Hi,
    I have two pdf documents (doc1 and doc2) with hyperlinks e.g www.somlink.com, www.somlink2.com.
    According to PDF Specification I can get those hyperlinks via Link Annotations -> URI Action. Link Annotations can be found in pdf page's dictionary under "Annots" key.
    So the problem is that in one pdf document I get that "Annots" array but in another document there is no such entry in page dictionary. But Adobe Reader recognize those hyperlinks (recognize means you can click on a link and it will be opened in web browser) in both documents. So it seems that there is another place where you can specify hyperlinks, not only in "Annots" array -> URI Action.
    Any ideas where it can be?

    No, that's where embedded ("real") link objects are.
    However, Adobe Acrobat/Reader have an "auto-detect links" feature which will read the text of the page and if it finds text that looks like a URL, make it active to click on.

  • Replacing @@ERROR Based Error Handling With Structured Exception Handling

    Could please any one explain 
    Thanks

    Hi Rmohan,
    In SQL Server 2008 R2, we can use RAISERROR to generate an error message and initiates error processing for the session. RAISERROR can either reference a user-defined message stored in the sys.messages catalog view or build a message dynamically.
    Do you want to build a custom error message? If so, you can use the following script:
    Begin Try
    RAISERROR ('Generate custom error message.', -- Message text.
    16, -- Severity.
    1 -- State.
    End Try
    Begin Catch
    -- We can also print the error message if necessary
    Print 'custom error message'
    DECLARE @ErrorMessage NVARCHAR(4000);
    DECLARE @ErrorSeverity INT;
    DECLARE @ErrorState INT;
    SELECT
    @ErrorMessage = ERROR_MESSAGE(),
    @ErrorSeverity = ERROR_SEVERITY(),
    @ErrorState = ERROR_STATE();
    -- Use RAISERROR inside the CATCH block to return error
    -- information about the original error that caused
    -- execution to jump to the CATCH block.
    RAISERROR (@ErrorMessage, -- Message text.
    @ErrorSeverity, -- Severity.
    @ErrorState -- State.
    End Catch
    The result is as follows:
    Reference:
    http://msdn.microsoft.com/en-IN/library/ms178592(v=sql.105).aspx
    Regards,
    Mike Yin
    TechNet Community Support

  • MDIS ValueX XML Structure, element TEXT not found in xml schema

    When you extract ECC Contract through MECCM using port ERP Contract Data Transmission, if your mapping isn't correct 2 exception types are created: StructuralX or ValueX (and ImportX but I haven't seen this type of exception yet).
    Anyone noticed that the structure of the XML messages are actually different? The XSD for structuralX files are the same as the files placed in the "ready" folder, where as the XSD for the valueX files are DIFFERENT, and contain a tag called <TEXT>.
    This raises an issue when we're trying to handle exceptions in Import Manager using the type Port.  We get error "Logon Error: Source file does not conform to XML Schema. Element <TEXT> not found in xml schema".
    We can process exceptions in the structuralX folder, but not in the valuex folder because the xml file structure in the valuex folder is different.
    Just wondering if anyone else has had this issue or has resolved it.  We will open message with SAP.
    Thanks.

    Hello
    What is your MDM version ?
    this issue happened in old MDM 7.1 versions but was fixed in SP-2 unless you mapped Clone fields and in this case the fix is a bit later.
    In MDM 7.1 the latest builds of SP-2 and SP-3 should have the fix for all issues. But if you use MDM 5.5 then some issues regarding XSD conversion for exception where not addressed due to technical issues.
    The workaround for MDM 5.5 (If you use a late build of SP-6 Patch-4 or SP-6 Patch-5)  is to use the original file to fix the exception and not the file in the exception folder.
    Please notice that when you have Structural exception then all the Source XML file will go to the Exception folder.
    But in case of Value Exception - The source XML file will be dropped in the archive folder and another XML file containing VXR's (Virtual Extended Records) will be dropped in the exception folder, Therefore will have a different structure.
    Hope it helps.
    Thanks.
    Best Regards.
    Yaron.

  • Import Manager - Exception Handling

    Hi All,
    While importing the records using MDIS, some files are not getting imported and go to the "Structural Exceptions".
    In order to find out the exceptions, i tried to login into Import manager using the following:
    Type : Port
    Remote System : MDC R/3 & ERP
    Port :  DEBMDM06R3_ERP_In [Exeption]
    Once I click on Finish button, i get a dialogue box saying "Logon error :  Could not retreive source file for the port DEBMDM06R3_ERP_In".
    Please suggest what should be done when i get such errors.
    Thanks and Regards,
    Sravan

    Hi Sravan,
    To know the reason for exceptions, check the Exception and Log folders over the path
    <MDM Installable Directory>\Server\Distributions\<Servername_databasetype>\<Repository>\Inbound\<Remote System>\<Port Code>\
    Since MDIS has already executed the import, your input file might have moved into other folders depending on the import status hence there would not be any file in Ready folder beacuse of file you are not able to open the Import Manager.
    Regards,
    Jitesh Talreja

  • Doubts on Exceptions

    Hi,
    Need some inputs from MDM Implementation experts.
    I have started working on SP06 sometime back (After working on SP04). Currently I am implementing MDM SP06 (latest patch) on Unix.
    I need some guidance from guys who have already implemented MDM on SP06 wrt Exceptions.
    1. After go-live, what types of exceptions do people receive?
    As far as my understanding goes Structural exceptions should not come as structures of entire landscape would have been finalised. With SP06 I have heard you can make config changes in mdis.ini file and Import manager to make sure Value exceptions do not come. So are we left with only Import Exceptions post go-live?
    I might be wrong on a few points so your comments on same are valuable.
    2. I understand that if you get errors in 100 records out of 1000. MDIS writes 100 xml files for each failed record in Exception folder along with main log file.
    If I am not incorrect MDM stores the entire file only for Structural Exception, not for Value/Import exceptions (for which it writes one XML per failed record). Please correct me here.
    3. Lastly there are guys here who have implemented this. So what are their suggestions with respect to Exceptions. Some best practices, use cases, dos and donts etc would be very beneficial here.
    In case you need to pass some documents please refer my Business card for further details (e mail).
    Regards,
    Dev.
    Edited by: Devashish Bharti on Jun 16, 2008 5:40 PM
    Edited by: Devashish Bharti on Jun 16, 2008 5:40 PM

    Guys Any one?

Maybe you are looking for