MDM 7.1 and PI 7.1 scenarios
Hay ..
PI 7.1 is having an adapter itself for Fetching Data from MDM Server.
What PI/ XI MDM Adapter will do is , it will keep on checking the MDM ready folders for Data.
you will create a MDM repository and PORT on MDM Server .. and provide this to Your XI / PI Guy ...
He/she will use this Repository and Port into config of there MDM Sender Adapter .. and MDM adapter will generated XML file from here..
and Vice versa.
Regards
Prabhat Sharma.
Hi,
see below links:
[MDM PI Adapter (Receiver type) : imports data to MDM or just puts xml file|MDM PI Adapter (Receiver type) : imports data to MDM or just puts xml file.]
[Configuration Of MDM adapter in PI 7.1 |Re: Configuration Of MDM adapter in PI 7.1]
regards,
BJagdishwar.
Similar Messages
-
MDM 3.0 and MDM 5.5
Hi All,
Can any body tell what are the differences between MDM 3.0 and MDM 5.5?
Regards,
NikhilMDM 3.0
Strengths
Supply chain expertise
Global metadata synchronization expertise – especially important to Consumer Packaged
Goods and Retail industries
3rd generation hub architecture with near term 4th generation features (image/content
management of A2i)
Weaknesses
Few production references
Early ramp up sites included: Deutsche Telekom, Dorel/PacificCycle, ENEL, General
Electric Consumer and Industrial, Heineken, Kingfisher Group, Nestlé, Nokia, Pemex,
Purdue University, Rubbermaid, Shell Europe, Tesoro Petroleum, Weyerhauser,
Whirlpool
Can be purchased only “on approval of SAP executive management on case by case
basis”
Batch emphasis; on-line capability not suitable for high transaction rates in large-scale
B2B or B2C scenarios
Emphasis on product/supplier capabilities rather than customer/employee
Lack of strong SI channel (the number of SIs promoting NetWeaver is a good channel,
however, the subset that are catering to SAP MDM is far smaller)
Under invested in marketing
No longer supported after 2012
MDM 5.5
Strengths
Support for single view of all major objects – customer, product, supplier and employee
(albeit lightweight customer and employee)
Focused on interactive cleansing and distribution of Material, Supplier, Customer, and
Employee master data within (SAP R/3-based) ERP environment; note that several large
organizations are using it outside of a SAP ERP environment such as GE and
Rubbermaid
Global metadata synchronization expertise
Product information management focus
o Fully integrated electronic and print publishing
o High performance parametric search across rich content
Hierarchical management
Integration with SAP infrastructure
4th generation data hub features (image/content management of A2i)
English, French and German initial support; Japanese 3Q2005
Weaknesses
Minimal references (Whirlpool)
Currently only supports “master data harmonization” – no automated central authority for
master data and therefore cannot enforce centralized/corporate data quality standards
Focused on interactive cleansing and distribution of Material, Supplier, Customer, and
Employee master data within (SAP R/3 based) ERP environment (n.b. = Not a typo – this
is either a strength or a weakness depending upon one’s requirements)
Batch emphasis, e.g. customer data is typically replicated in batch mode among
participating systems; however, enterprises can propagate customer data using the same
common architecture that is used by the product hub for replication/distribution via SAP
NetWeaver Exchange Infrastructure or directly via APIs
Lack of strong SI channel (the number of SIs promoting NetWeaver is a good channel,
however, the subset that are catering to SAP MDM is far smaller)
Under invested in marketing (if SAP was true believer at the executive level in the
strategic nature of enterprise master data management, then the SAP MDM product
would be much more prevalent in the overall SAP marketing mix)
Emphasis on product/supplier capabilities rather than customer/employee
Hope this will be helpful.
Reward points if found useful.
Regards
Sravan Velamury -
SAP MDM Implementation Methodology and Architecture
Hello,
I wanted know what are the standard approaches for MDM architecture and MDM Implementation:
MDM Implementation phases:
what are standard phases recomended by SAP?
Architecture:
what are different mdm architectures that an Enterprise can think of?Hello SudhaViz
SAP MDM can work as independent solution for master data management.
SAP MDM has own servers( MDM Server, Import Server, Sysndication Server, Layout Server, and user application s for server management and master data management.
SAP MDM can work with different RDBMS like as Oracle , MS SQL, My SQL, DB2.
Here is good presentation about SAP MDM and it's business scenarios:
http://www.sdn.sap.com/irj/scn/index?rid=/media/uuid/0030d731-65ac-2d10-6197-d64f34811d94
Here is detail documentation :
http://help.sap.com/saphelp_nwmdm71/helpdata/en/mdm_index.htm
Regards
Kanstantsin Chernichenka -
Step by Step Guide Details for RFC to File and File to RFC scenario
Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
RajHi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM -
Month to Date and Year to Date Scenarios
<b>Dear SAP BI Gurus,
Can anyone please give me guidance how to create a Month to Date and Year To Date Scenarios (Variables perhaps?) for 0SRR_CF_C1? The date is in decimal and not DATE format Im assuming the reason for this is to get the Time variance . Nonetheless, Id like to create a MTD and YTD scenario for reporting.
Much Thanks
Philips Manalaysay</b>Hi,
You should take a look at the blog and doc below.
/people/vikash.agrawal/blog/2006/10/17/enable-trend-reporting-150-by-manipulating-variable-value
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Regards, -
IDoc to JDBC and JDBC to IDoc Scenario
Dear All,
I am working on IDoc to JDBC and JDBC to IDoc Scenario.
I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
Does anyone have completed STEP by STEP scenario document for this?
How my Idoc will sent to XI?
How XI will pick up data from IDoc?
How XI will Convert data to JDBC and UPDATE in Oracle Database?
And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
Where and When i can watch my process and data?
How can i test the whole integration?
I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE it gives me error
"Unable to refresh cache "NO_BUSINESS_SYSTEM"
"Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
Please solve all the above problems i will reward u points
thanks,
RPHi,
While we working on IDOC to JDBC interface..
We have to deploy JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Idoc Reveiver adapter..
http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Thanks,
Satya Kumar
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM -
PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario
Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of. -
ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3
Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
StevenHi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi. -
How to send multiple records in file2file and file2db or all scenarios//
I'm able to send single record for file2file and file2db,
how to send multiple records in file2file and file2db or all scenarios//
what should add or make changes for dis.1 put Occurance 1 to Unbounded in data type of IR
2 In the test tag of message mappings in IR,select one node and use "duplicate subtree" in its context menu
After that,you can download the test data in XML format with the button "save document source"
for example:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ZFileDemo xmlns:ns0="http://hand-china.com/mm/po_01">
- <Item>
<ItemNo>1</ItemNo>
<Matnr>2</Matnr>
<Text>3</Text>
</Item>
- <Item>
<ItemNo>4</ItemNo>
<Matnr>5</Matnr>
<Text>6</Text>
</Item>
</ns0:ZFileDemo> -
RFC Sender and RFC Receiver Sync Scenario . Help required.
Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
RegardsHi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM -
Differences between MDM 3.0 and MDM 5.5?
Hi,
Can anybody tell, what are the differences between MDM 3.0 and MDM 5.5?
I heard that, there are lot and lot of changes...
Thanks for your reply,
regrads,
cgWe can look at differences in more than one way:
1. Technology wise
MDM5.5 is developed in C++ & runs on a C++ engine as compared to MDM 3.0 which runs under WAS
However MDM 5.5 is integrated with NW largely, though it can & is planned to be improved further
2. Product Catalog Management
MDM 5.5 has rich PCM capabilities which did not exist in MDM 3.0
3. Other additional capabilities in 5.5
Multilingual support
Syndication of data to XI or file system
Lean, R/3 Idoc based model for supplier, customer, material, employee
4. Ease of installation and usage is a also an advantage of 5.5
You can read Nitza Levi's blog on MDM home page for more details -
Read data from MDM For Lookup and Flat table using MDM ABAP API
Hi,
I have requriment to read data from MDM from FLAT and Lookup table using MDM ABAP API. My design is like this ,
I have one ITEMS (Main table in MDM) and inside that i have one Lookup flat table ITEM_TYPE , my requriment is to read Item number and its related Item type.
From ABAP.
Please help if any body has any idea.
Regards,
ShyamHI Guys,
I found my solution by myself. Below is the solution , hope this will help others:-
Retrieve data from MDM using MDM ABAP API.
Step- 1. Create structure in SAP with the same name as that of MDM field code for MDM Main table.
Step-2. Create another structure in SAP having all lookup fields of MDM , fieldname in ECC must be same as that of MDM field
code.
Step-3.Create structure in SAP for individual lookup field(Single Field only) with the same name as MDM Field code.
Step-4.
DATA: IT_QUERY TYPE STANDARD TABLE OF MDM_QUERY, "MDM_QUERY_TABLE,
WA_QUERY TYPE MDM_QUERY,
WA_CDT_TEXT TYPE MDM_CDT_TEXT,
IT_RESULT_SET_KEY TYPE MDM_SEARCH_RESULT_TABLE,
WA_RESULT_SET_KEY TYPE MDM_SEARCH_RESULT,
WA_STRING TYPE STRING.
DATA:<Internal table> TYPE STANDARD TABLE OF <SAP Str Having all LOOKup Fields>
DATA: :<Internal table>TYPE STANDARD TABLE OF <SAP Str one LOOKup field>,
<Workarea> LIKE LINE OF :<Internal table>.
*PASS LOGICAL OBJECT NAME.
V_LOG_OBJECT_NAME = 'Logical object name defined in Customization'.
Define logon language, country & region for server
WA_LANGUAGE-LANGUAGE = 'eng'.
WA_LANGUAGE-COUNTRY = 'US'.
WA_LANGUAGE-REGION = 'USA'.
TRY.
CREATE OBJECT LR_API
EXPORTING
IV_LOG_OBJECT_NAME = V_LOG_OBJECT_NAME.
ENDTRY.
CONNECT to repository. Apply particular logon language info
CALL METHOD LR_API->MO_ACCESSOR->CONNECT
EXPORTING
IS_REPOSITORY_LANGUAGE = WA_LANGUAGE.
*NOW PASS ITEM NO AND GET KEY FROM MDM.
CLEAR WA_QUERY.
WA_QUERY-PARAMETER_CODE = <MDM FIELD CODE>. "Field code
WA_QUERY-OPERATOR = 'EQ'. "Contains
WA_QUERY-DIMENSION_TYPE = 1. "Field search
WA_QUERY-CONSTRAINT_TYPE = 8. "Text search
WA_STRING = <Field Value>.
GET REFERENCE OF WA_STRING INTO WA_QUERY-VALUE_LOW.
APPEND WA_QUERY TO IT_QUERY.
CLEAR WA_QUERY.
*PASS ITEM NUMBER AND GET RELATED KEY FROM MDM.
TRY.
CALL METHOD LR_API->MO_CORE_SERVICE->QUERY
EXPORTING
IV_OBJECT_TYPE_CODE = <MDM Main Table>
IT_QUERY = IT_QUERY
IMPORTING
ET_RESULT_SET = IT_RESULT_SET_KEY.
CATCH CX_MDM_COMMUNICATION_FAILURE .
CATCH CX_MDM_KERNEL .
CATCH CX_MDM_NOT_SUPPORTED .
CATCH CX_MDM_USAGE_ERROR .
CATCH CX_MDM_PROVIDER .
CATCH CX_MDM_SERVER_RC_CODE .
ENDTRY.
Pass record id into keys.
LOOP AT IT_RESULT_SET_KEY INTO WA_RESULT_SET_KEY.
WA_KEYS = WA_RESULT_SET_KEY-RECORD_IDS.
ENDLOOP.
WA_RESULT_SET_DEFINITION-FIELD_NAME = <Look field name>.
APPEND WA_RESULT_SET_DEFINITION TO IT_RESULT_SET_DEFINITION.
CALL METHOD LR_API->MO_CORE_SERVICE->RETRIEVE
EXPORTING
IV_OBJECT_TYPE_CODE = <MDM Main Table>
IT_RESULT_SET_DEFINITION = IT_RESULT_SET_DEFINITION
IT_KEYS = WA_KEYS
IMPORTING
ET_RESULT_SET = IT_RESULT_SET.
LOOP AT IT_RESULT_SET INTO
WA_RESULT_SET.
*PASS KEYS INTO MAIN TABLE TO GET Structure for FALT or Look up Table
TRY.
CALL METHOD LR_API->MO_CORE_SERVICE->RETRIEVE_SIMPLE
EXPORTING
IV_OBJECT_TYPE_CODE = <MDM Main Table>
IT_KEYS = WA_KEYS
IMPORTING
ET_DDIC_STRUCTURE =<SAP Strct having all Look up fileds of MDM>
ENDTRY.
LOOP AT <SAP Strct having all Look up fileds of MDM> INTO <Work area>.
CLEAR WA_KEYS.
APPEND <Work area>-field name TO WA_KEYS.
CALL METHOD LR_API->MO_CORE_SERVICE->RETRIEVE_SIMPLE
EXPORTING
IV_OBJECT_TYPE_CODE = <MDM Lookup table name>
IT_KEYS = WA_KEYS
IMPORTING
ET_DDIC_STRUCTURE = <Single Structure in SAP For Lookup field>.
READ TABLE <Single Structure in SAP For Lookup field>. INTO <Work Area> INDEX 1.
Here you can get the value of realted lookup fields associated with main table data.
ENDLOOP.
ENDLOOP.
LR_API->MO_ACCESSOR->DISCONNECT( ).
Edited by: Shyam Babu Sah on Nov 24, 2009 4:52 AM -
Required Help and Documentations for following Scenarios. URGENT
Hi every one,
I require help and materials for following scenarios:
<b>1) RFC to IDOC
2) JDBC to RFC & IDOC
3) Mail to File
4) HTTP to RFC, JDBC & IDOC
5)WEB SERVICES to RFC & IDOC
6) IDOC to ABAP proxy
7) Java Proxy to JDBC</b>
my email id: <u>[email protected]</u>
urgent plzz help me...
Message was edited by:
satish cSatish,
I would suggest to go through sravyas weblogs where she has given all the links to all the scenarios:
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
Also check this weblogs which they have explained with some scenarios:
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards,
---Satish -
Problem in Creating and Scheduling an ODI Scenario
Hi,
while Creating and Scheduling an ODI Scenario with the help of the following link:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/10g/10135/creating_scheduling_scenario/creating_scheduling_scenario.htm#t2
Oracle DI Agent is not listed in services window(Start>Control Panel>Administrative Tools > Services).
What shall I do?
please tell me.And in addition please tell me the use of the Oracle DI Agent and why should we stop its service before creating the schedule??
Thanks
AnindyaPlease also look into this link http://odiexperts.com/agent/
First of all did you got any Error why creating Agent Server else the agent service should be visible.
Else please try this step.
Update Odiparams
agentservice -i -s <agent_name>
Go and look for Services starting with Oracledi_Agent_<agentNAME> and start it Finally test the agent and you should be able to schedule.
you dont need to stop the Agent for every new Schedule, but you will need to right click on Agent and click on Update Scheduling -http://odiexperts.com/scheduling-using-odi-scheduler/
If you are getting an error please provide us the error info and step at which you got the error. -
One Sender system and two receivers system scenario. Pls help
Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
RegardsHi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok
Maybe you are looking for
-
Lenovo IdeaTab Lynx K3011 Windows 8 Will not boot to usb/dvd
I have tried almost everything, over the course of the past few day's, to get this tablet to boot to usb/dvd drive. Secure boot has been disabled. Cannot access a boot menu on startup. When using windows 8 boot manager and selecting boot to usb cd or
-
Error generating custom authentication providor MBean
I'm using WLS 9.0 and am having troubles creating my custom authentication provider. I have created my class that implements AuthenticationProviderV2 and my class that implements LoginModule and put my MBeanType xml file in the same package as my two
-
Hi, I have a question on reference cursor. In case of having the data from a database table , can the ref cursor be open for a pl/sql table or a pl/sql object . The scenario is something like this . I have a report which needs some calculations and a
-
Hello, Can anyone please let me know how to do the setup of Apache/Tomcat server to run XSQL pages against Oracle 8i server? More specifically, I need to know if I need to download any software component from Oracle or elsewhere. I have Oracle 8i run
-
Hi, Hi ,I want to create a job that runs only on MON,TUE,THUR and FRI (not on WED and WEEK ENDS).and i created the below schedular which is giving error.Please suggest me . BEGIN dbms_scheduler.create_schedule(schedule_name=>'STATS_WEEKDAY_RUN', reso