MDM 7.1 Developer Edition

Hello SAP,
There is a NWCE 7.1 Developer Edition that can be installed on a win32 machine.
Will there be a similar edition for MDM 7.1?
If yes, when will it be available?
Regards,
Effi.

Hi,
If You Want to Cosnume Enterprise Services From Enterprise Service Repository In Webdynpro Of NWDS CE 7.1.
Gothrough Below Blog.
How to Consume an Enterprise Service from the ES Workplace in Web Dynpro in the new SAP NetWeaver Composition Environment 7.1
in the above blog contains the video of consuming Enterprise Services From ESR into Webdynpro.
The Below 3 Links Have Step by Step Procedure For Calling Enetrprise Services In Webdynpro From ESR.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2076831c-efce-2910-7582-ff2b4495d81b?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0eeea30-f1ce-2910-c180-d5758441de56?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50038f8d-fbce-2910-e289-92154874ab4a?prtmode=navigate
Thanks
Subbarao Chinta

Similar Messages

How can I connect with SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition

Hello together,
I downloaded and installed the SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition on a virtual client.
I toke a long period to finish the installation.
Now some questions to use this system in the right way:
1.) How can I get a "developer license" which do not expire? Because the link http://www.sap.com/minisap seems to be not ok.
2.) How can I connect via network with the sap system? the application server is running on a vm client with a static ip i.e. 192.168.1.5. And my laptop gets a ip in the same range. I have installed the gui on my laptop and tried to connect with the system. But it does not work! I used as application server the ip of the virtual machine. I use the gui witch is installed on the same host like the application it works (with localhost as application server adress)
3.) Where can I download the newest version of the SAP Gui? I do not have a service marktplace account? Is it possible?
4.) I read in the documentation that it should be possible to reach the sap system also with web dynpro: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
But it does not work. I got an error message: Service cannot be reached
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
Regards
Christian

I fixed in the meantime the second problem. It was a problem with my local firewall. But the other three points are still open.
Thank in advance for your help

NetWeaver Developer Edition: Workspace Server Error every 2 Minutes

Hi there,
I installed SAP NetWeaver AS ABAP 7.02 SP6 32-bit - Developer Edition on Windows XP 32 Bit in a Virtual Machine with Virtual Box. My Host hase got 8 GB RAM and 4 x >3Ghz Processor and I gave 4GB Ram and 2 Cores to the Virtual Machine. 
The Installation was ok and the Systems works. But now I began to do some exercises (Add 2 Tables and some Types) and now Windows tells me after 2 Minutes I'm logged on Disp+Work.Exe --> an error occured. Then the SAP Workspace Server is rebooted and I can log on for the next 2 minutes. 
The Error Log tells me that the WorkSpace Process Died (?) but I dont know what to do... can anybody help? This is the Log:
 
 
trc file: "dev_disp", trc level: 1, release: "720" 
 
sysno 00 
sid NSP 
systemid 560 (PC with Windows NT) 
relno 7200 
patchlevel 0 
patchno 70 
intno 20020600 
make multithreaded, Unicode, optimized 
profile
testsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_testsap 
pid 3704 
Sat Nov 19 22:26:56 2011 
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC) 
length of sys_adm_ext is 588 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3704) [dpxxdisp.c 1268] 
 shared lib "dw_xml.dll" version 70 successfully loaded 
 shared lib "dw_xtc.dll" version 70 successfully loaded 
 shared lib "dw_stl.dll" version 70 successfully loaded 
 shared lib "dw_gui.dll" version 70 successfully loaded 
 shared lib "dw_mdm.dll" version 70 successfully loaded 
 shared lib "dw_rndrt.dll" version 70 successfully loaded 
 shared lib "dw_abp.dll" version 70 successfully loaded 
 shared lib "dw_sym.dll" version 70 successfully loaded 
 shared lib "dw_aci.dll" version 70 successfully loaded 
rdisp/softcancel_sequence : -> 0,5,-1 
use internal message server connection to port 3900 
rdisp/dynamic_wp_check : 1 
rdisp/calculateLoadAverage : 1 
 
Sat Nov 19 22:26:57 2011 
MtxInit: 30000 0 0 
DpSysAdmExtInit: ABAP is active 
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active 
DpIPCInit2: write dp-profile-values into sys_adm_ext 
DpIPCInit2: start server >testsap_NSP_00 < 
DpShMCreate: sizeof(wp_adm) 20000 (2000) 
DpShMCreate: sizeof(tm_adm) 4323912 (21512) 
DpShMCreate: sizeof(wp_ca_adm) 32000 (64) 
DpShMCreate: sizeof(appc_ca_adm) 32000 (64) 
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064 
DpShMCreate: sizeof(comm_adm) 556064 (1104) 
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0 
DpShMCreate: sizeof(slock_adm) 0 (96) 
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0 
DpShMCreate: sizeof(file_adm) 0 (80) 
DpShMCreate: sizeof(vmc_adm) 0 (1792) 
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192) 
DpShMCreate: sizeof(gw_adm) 48 
DpShMCreate: sizeof(j2ee_adm) 3920 
DpShMCreate: SHM_DP_ADM_KEY (addr: 08180040, size: 5055296) 
DpShMCreate: allocated sys_adm at 08180048 
DpShMCreate: allocated wp_adm_list at 08182F28 
DpShMCreate: allocated wp_adm at 08183020 
DpShMCreate: allocated tm_adm_list at 08187E48 
DpShMCreate: allocated tm_adm at 08187E70 
DpShMCreate: allocated wp_ca_adm at 085A78C0 
DpShMCreate: allocated appc_ca_adm at 085AF5C8 
DpShMCreate: allocated comm_adm at 085B72D0 
DpShMCreate: system runs without slock table 
DpShMCreate: system runs without file table 
DpShMCreate: allocated vmc_adm_list at 0863EEF8 
DpShMCreate: system runs without vmc_adm 
DpShMCreate: allocated gw_adm at 0863EF50 
DpShMCreate: allocated j2ee_adm at 0863EF88 
DpShMCreate: allocated ca_info at 0863FEE0 
DpShMCreate: allocated wall_adm at 0863FEF8 
DpCommAttachTable: attached comm table (header=085B72D0/ft=085B72D8) 
DpSysAdmIntInit: initialize sys_adm 
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL 
dia token check not active (3 token) 
MBUF state OFF 
DpCommInitTable: init table for 500 entries 
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm 
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80 
EmInit: MmSetImplementation( 2 ). 
MM global diagnostic options set: 0 
<ES> client 0 initializing .... 
<ES> InitFreeList 
<ES> block size is 1024 kByte. 
Using implementation view 
<EsNT> Using memory model view. 
<EsNT> Memory Reset disabled as NT default 
<ES> 1023 blocks reserved for free list. 
ES initialized. 
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE 
MPI: dynamic quotas disabled. 
MPI init: pipes=4000 buffers=159 reserved=47 quota=10% 
 
Sat Nov 19 22:26:58 2011 
rdisp/http_min_wait_dia_wp : 1 -> 1 
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654] 
***LOG Q0K=> DpMsAttach, mscon ( testsap) [dpxxdisp.c 12221] 
MBUF state LOADING 
DpStartStopMsg: send start message (myname is >testsap_NSP_00 <) 
DpStartStopMsg: start msg sent 
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off. 
DpMBufHwIdSet: set Hardware-ID 
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296] 
MBUF state ACTIVE 
DpWpBlksLow: max wp blocks in queue is 400 (80 %) 
MBUF component UP 
DpMsgProcess: 1 server in MBUF 
DpAppcBlksLow: max appc blocks in queue is 250 (50 %) 
 
Sat Nov 19 22:27:59 2011 
DpModState: change server state from STARTING to ACTIVE 
 
Sat Nov 19 22:33:38 2011 
ERROR => DpHdlDeadWp: W0 (pid 2012) died (severity=0, status=0) [dpxxwp.c 1522] 
Edited by: frankie2209 on Nov 19, 2011 10:59 PM
 
C:\usr\sap\NSP\DVEBMGS00\work --> file dev_wi shows an error:
 
M Sat Nov 19 22:28:10 2011 
M *** ERROR => alert/MONI_SEGM_SIZE not set. Monitoring switched off. [alxxmoni.c 10094] 
M {root-id=080027A0577D1ED184DEABD3CD8E66BD}_{conn-id=00000000000000000000000000000000}_0 
 
M 
M Sat Nov 19 22:28:11 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
A 
A Sat Nov 19 22:31:21 2011 
A GENER starting remote generation: SAPLSED6 (requested by W0). 
S 
S Sat Nov 19 22:33:18 2011 
S found spool memory service RSPO-ACTIONS at 11B99D88 
M 
M Sat Nov 19 22:37:18 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
M 
M Sat Nov 19 22:47:18 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
M 
M Sat Nov 19 22:56:51 2011 
M in_ThErrHandle: 1 
M ThIErrHandle: new stat of W1 is WP_SHUTDOWN 
M ThIErrHandle: I'm during shutdown 
M PfStatDisconnect: disconnect statistics 
M ThIErrHandle: entering ThSetStatError 
C CANCEL rejected, because there is no SQL statement active 
B db_sqlbreak() = 1 
M ThCallDbBreak: no sql statement active 
M ThIErrHandle: don't try rollback again 
M ThShutDownServer: shutdown server 
M ThCallHooks: call hook >Shutdown PXA< for event BEFORE_SHUTDOWN 
A Saving PXA statistics. 
A 540 programs loaded. 
A file pxanew opened. 
A 540 entries written. 
M ThCallHooks: hook >Shutdown PXA< o.k. 
M PfStatIndInit: Initializing Index-Record 
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf 
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
B dbtbxbuf: Saving TBX statistics: 
B dbtbxbuf: 40 object entries written. 
B Disconnecting from ALL connections: 
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 001 000 R/3 000000000 INACTIVE NO NO NO YES NO NO 000 255 255 20111119 222712 testsap
C Disconnecting from connection 0 ... 
C Now I'm disconnected from MaxDB 
B Disconnected from connection 0 
B statistics db_con_commit (com_total=97, com_tx=19) 
B statistics db_con_rollback (roll_total=0, roll_tx=0) 
M ***LOG Q02=> wp_halt, WPStop (Workp. 1 3304) [dpnttool.c 339] 
 
 
Edited by: frankie2209 on Nov 19, 2011 11:18 PM
 
Now I saw in syslog in SAPMMC that when I start the ApplicationServer "NSP" ive got an Error:
"Communications data: Service initialization failed" (Process Type RD, PID 03356 , Message ID S10 But message_server.exe and disp+work.exe are running green and i can log on into sap. and then after 1 minute the explaned error occurs.(WorkspaceProcess is restarted and sapsession breaks down - i have to log on again)
Edited by: frankie2209 on Nov 19, 2011 11:45 PM

Please check the value of the parameter PHYS_MEMSIZE in the file <Drive>:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_testsap . Set the value to 2048M. Also set the page file size to 10GB. Ensure you have space on disk to allocate space for paging.

Installing SQL Server 2012 Developer Edition or wait for SP2?

Hi everyone,
I just received my copy of SQL Server 2012 Developer Edition I ordered. As usual, before installing, I searched the web for any hint or other stuff on the subject.
I first found that SP1 was already available. Honestly I prefer installing using the last version available instead of upgrading. I found the SP1 install package using the following web address:
http://www.microsoft.com/fr-ca/download/details.aspx?id=35575
Is this the right install package to use?
Now, still reading everything I could find on that SP1, I found stories about major issues with SP1.
Two examples I remember:
http://connect.microsoft.com/SQLServer/feedback/details/770630
http://support.microsoft.com/kb/2793634/en-us?wa=wsignin1.0
Two others (not specifically related to SP1):
http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/a0da3372-ab3d-4af0-b4c4-0d47163e0e03/
http://www.sqlperformance.com/2012/11/system-configuration/2012-cal-problems
My question. Should I wait for SP2? If so, any target date when it should be available?
If not, what would you recommend as the logic install sequence? Should I look for any cumulative update(s)? Any other "manual settings" I should consider?
Finally, can someone guide me regarding what options I should choose while installing. My main goal is to program/build C++, C# applications using VS2010 that will interface with SQL Server for data storage purposes (add/update/delete,
batch update/delete) and reports.
Hope to hear from someone.
Stephane
BTW: My current setup is the following:
Intel(R) Core(TM)2 CPU [email protected]
3.00 Go
Vista Ultimate SP2 32bits
Visual Studio 2010 Professional Edition (which will be upgraded to last SP once installed)

Hi again,
I proceeded with download of CU7. On Microsoft's webpage, there are several files we can download:
2012_SP1_DAC_CU7_2894115_11_0_3393_x86
2012_SP1_AOrcleDes_CU7_2894115_11_0_3393_x86
2012_SP1_AOrcleSer_CU7_2894115_11_0_3393_x86
2012_SP1_PPExcel_CU7_2894115_11_0_3393_x86
SQLServer2012_SP1_CU7_2894115_11_0_3393_x86
Which one I should choose?
Also, some people reported having problems installing this update.
http://blogs.msdn.com/b/sqlreleaseservices/archive/2013/11/19/cumulative-update-7-for-sql-server-2012-sp1.aspx
Can you comment?
Thanks again for helping,
Stéphane

Firefox Developer Edition won't launch (Win7 64-bit)

Hi,
I am running Windows 7 64-bit with the latest Windows updates. When I click the icon to launch Firefox Developer Edition, it will not launch and immediately open the Mozilla Crash Reporter. Details from the Crash reporter are below.
Things I have tried:
-Booting into Safe Mode by holding Shift key.
-Run Windows Memory Diagnostics (returned no errors).
-Updated Windows to latest updates.
-Perform a clean re-install (uninstall Firefox, deleting profiles, clearing keys from Windows Registry).
-Closed my antivirus (Kaspersky) before launching.
No matter what I do, FDE will crash at launch. Regular Firefox works just fine (which is odd to me). FDE works just fine with my same sync profile and same plugins on my Macbook Pro, but on my Windows 7 machine it crashes every time.
Please help! I love Firefox Developer Edition.
-Rommel.
AdapterDeviceID: 0x6719
AdapterDriverVersion: 8.850.0.0
AdapterSubsysID: 00000000
AdapterVendorID: 0x1002
Add-ons: content_blocker_663BE84DBCC949E88C7600F63CA7F098%40kaspersky.com:4.5.1.379,virtual_keyboard_07402848C2F6470194F131B0F3DE025E%40kaspersky.com:4.5.1.379,online_banking_08806E753BE44495B44E90AA2513BDC5%40kaspersky.com:4.5.1.379,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:38.0a2
AvailablePageFile: 14740545536
AvailablePhysicalMemory: 6482825216
AvailableVirtualMemory: 4038242304
BIOS_Manufacturer: American Megatrends Inc.
BlockedDllList:
BreakpadReserveAddress: 46923776
BreakpadReserveSize: 67108864
BuildID: 20150301004021
CrashTime: 1425240189
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1425239399
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x6719, AdapterSubsysID: 00000000, AdapterDriverVersion: 8.850.0.0
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: aurora
SecondsSinceLastCrash: 493
StartupTime: 1425240189
SystemMemoryUsePercentage: 24
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 17104310272
TotalPhysicalMemory: 8553099264
TotalVirtualMemory: 4294836224
URL:
Vendor: Mozilla
Version: 38.0a2
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.

''philipp [[#answer-697281|said]]''
<blockquote>
ok thanks - this looks like a crash related to graphics/hardware acceleration.
as a first step please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]] through the graphic chip's vendors homepage
or in case this doesn't solve the issue or there is no new version available at the moment, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
</blockquote>
Hi Philipp,
Thanks for your help so far. I really appreciate it.
I have installed the latest drivers for my graphics card. I am unable to start Firefox in Safe Mode. I hold Shift and click the FirefoxDeveloperEdition and I get the Mozilla Crash Reporter just the same. Is there another way to enable Safe Mode or maybe disable hardware acceleration?
This is the latest Crash Report after I updated my graphics card drivers and rebooted: Crash ID: bp-ae23e8f6-35c5-40df-83f8-4b2992150301
-Rommel.

Cant figure out how to install the Developer edition

Hey everybody, I'm totally new to ColdFusion technology. I
work in the advertising world working on print related material.
Feeling a desire to learn more, I decided to teach myself Flash.
So, I picked up the Flash Bible and began reading. After I finished
the section on creating forms in Flash, I thought it would be a
good idea to learn ColdFusion so I could learn how to write server
side scripts and test them on my local machine with my Flash forms
before deploying them to a remote server. In any case, I downloaded
the free Developer edition of ColdFusion MX 7. Something is going
wrong, and I have no idea why? After I finished completing each
section of the installation process, the program does not seem to
install into my hard drive. I have the path for the program to be
installed in my applications folder on my hard drive. I'm also
running on MAC OS 10.4.8.
Here is some info on my computer:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 3 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.5f0
And this I copied from the Adobe site for ColdFusion MX 7
system requirements:
Macintosh
ColdFusion Product Editions Enterprise, Standard, Developer
Processor PowerPC
Operating System Apple Mac OS X 10.3.9, 10.4.2 and 10.4.3
Memory 512 MB RAM
Hard Disk Space 500 MB

I decide that it may be helpful to include this info that I
copied and
pasted from the installation windows.
The Installation Confirmation window:
Installation Type:
Server configuration
Licensing:
Developer Edition
Installation Directories:
Product: /Applications/ColdFusionMX7
Web root: /Applications/ColdFusionMX7/wwwroot
Server Information:
Web Server: Built-in Web Server
Port: 8500
Search Service: not installed
Sample Apps: not installed
RDS: disabled
Disk Space Information (for Installation Target):
Required: 267,025,584 bytes
Available: 25,123,663,872 bytes
The Installation Complete window:
You have successfully completed the first step in installing
$PRODUCT_NAME$.
To continue with your installation, go to
$USER_INSTALL_DIR$$/$bin and
type"./coldfusion start" to start your server.
Once the server is started log in to the Configuration Wizard
at
http://[machinename

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

Do I need to install crystal reports developer edition?

Hi,
I tried to open a CR 8.5 reports in vs 2005 and it opened up fine. But when I try to preview the report it comes up with the error
Failed to load Database information
Details:The Database DLL 'crdb_fielddef.dll' could not be found.
We have used Active Data drivers and Field definitions using ttx files in 8.5. We used the 8.5 developer edition. Will I be able to use the crystal reports for .net with vs 2005 without installing the new version of crystal reports or Do I need to install the developer edition to overcome this? I used the 10.2 version with the VS2005.
Thanks,
SS

VS 2005 does not ship with crdb_fielddef.dll, which is the lib used with ttx reports. You won't be able to preview off of a ttx file, or create a new Crystal Report off of a ttx file, using CR.NET shipped with VS 2005.
If you require those functionalities, CR XI Release 2 would be an possible option.
Sincerely,
Ted Ueda

Updrading from VS 2005 bundled CR XI to Developer Edition

Post Author: Faraz
CA Forum: Upgrading and Licensing
Hi, Is it possible to upgrade a CR XI .Net Edition license that comes bundled with VS 2005 to a Crystal Reports XI Developer Edition license, or do I need to purchase a full version? In case an upgrade is possible, what kind of license would I get? We have volume based licensing for Visual Studio 2005 through an MSDN subscription, would the CR XI upgrade also be volume based, or do we have to purchase a Developer Edition license upgrade for each developer? Thanks

Post Author: blairwheadon
CA Forum: Upgrading and Licensing
Yes. Upgrade licenses are available to go from the bundled CR in VS 2005 to Crystal Reports XI Developer Edition.
You can contact us directly at 1-888-229-2276 or your local reseller for pricing.
Thanks, Blair
Crystal Reports Product Management

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Where can I download CRX developer edition ? Im geting error message on clicking the Download link

Where can I download CRX developer edition ? Im geting error message on clicking the Download link.
Someone pls help me to download CRX.
Thanks in Advance.

Hi Jayanth,
Are you able to down load the develoer version finally?

Develop Edits made with LR 4.3 won't show up in ACDSee Pro 5

I use lightroom 4.3 to edit my CR2 files and ACDSee Pro 5 to catalog and sort my huge photo collection and I would love to use it for the CR2 images too.
The problem is, that the develop edits that I make to the CR2 files using LR , won't dispay in ACDSee .. all I can see there are the original cr2 files without the edits made to them. I just had a chat with the adobe support team and they say Lightroom is working perfectly, because the changes show up in Bridge and LR. And the people from ACDSee say that the lightroom edits are Adobe specific.
I thought that an XMP file is there for that purpose : to be able to see the info in other programs. By the way : CR2 files and the XMP are stored in the same location, so that can't be the problem.
Is anyone having this problem too? Or can anybody help me with this please.
If this issue can't be solved, then I will use Bridge or LR as catalog, and maybe I will like it even more, but for now I would like to use ACDSEE.
Thanks in advance for the help.
Marina

myhrmar wrote:
I just had a chat with the adobe support team and they say Lightroom is working perfectly, because the changes show up in Bridge and LR. And the people from ACDSee say that the lightroom edits are Adobe specific.
Correct. That's proprietary processing with the LR engine which has yet to be done (rendered and exported). The preview in those Adobe app's understand this and show you the edits but ACDC can't. You have to render an iteration as a TIFF or similar with the edits applied for another app to 'see' that. ACDC has not access to those preivews so it doesn't show you what will be applied upon export.

Firefox Developer Edition constantly asks me to update

I am using Firefox Developer Edition 37.0a2 and every start of browser is asks me to update to version 37.0a2. Even when I click to update it is trying to connect to the server and that is only thing that I see.
I did run firefox in safe mode. The result is the same.
I copied my old profile from firefox 35 to firefox 37.0a2. Is there some file with firefox version name or something else is provoking this error?

I think the rebranding was a good idea.
I am all for increased promotion for testing pre release versions it helps users identify & report problems to. It enables users to see new features earlier.
The only disadvantage is the danger of attracting novice or naive users that are going to have problems but not report them or being unable to downgrade to a working release. The Developer Edition sidesteps the last issue as it is a separate install with its own profile, and the name will put off novices.

InDesign Server Developer Edition, PDF export problem

I'm currently testing our application on IDS CS5, using Developer Edition. Whenever I attempt to export a PDF, I receive the following error:
Wed Mar 2 10:17:29 2011 WARN [server] Colour in one or more placed graphics cannot be represented as CMYK. Non-CMYK colour is not compliant with the PDF/X-1a standard. You can click OK to produce a valid PDF, but it will not be a PDF/X-1a compliant file.
Wed Mar 2 10:17:29 2011 ERROR [server] JavaScript Error!
Error Number: 2
Error String: User cancelled this action.
Engine: main
Line: 1428
Source: this.document.exportFile(ExportFormat.pdfType, documentFile);
Interpreter: CS4 (6.0)
This happens even with a completely blank document. It works fine if I export JPGs or an INDD file from the same file. I'm guessing this is due to the watermark that Developer Edition places on every page. I'm fine with that, but not actually being able to export an X-1a PDF makes testing quite tricky.
Any suggestions?

I get the same thing:
    private void exportPDF(Document document, PDFType pdfType) throws IdsException {
        String pdfPath = this.outputPrefix + pdfType.getFileEnding();
        getApplication().getPDFExportPreferences().setPageRange(buildExportPageRange(document));
        document.doExport(VariableTypeUtils.createString("Adobe PDF"),
                pdfPath,
                OptArg.makePDFExportPreset(getPDFExportPreset(document, pdfType)),
                OptArg.noBoolean(),
                OptArg.noString(),
                OptArg.makeBoolean(true));
        addExportedPreview(pdfPath);
        log.debug("Exported PDF: " + pdfPath);
    private PDFExportPreset getPDFExportPreset(Document document, PDFType pdfType) throws IdsException {
        Application application = getApplication();
        PDFExportPreset preset = application.getNamedChildPDFExportPreset(pdfType.getExportPresetName());
        preset.setCropMarks(pdfType.isCropMarks());
        preset.setUseDocumentBleedWithPDF(pdfType.isBleed());
        if (pdfType.isBleed() || pdfType.isCropMarks()) {
            preset.setPageMarksOffset(UnitConverter.toUnit(getPageMarksOffset(document)));
        } else {
            preset.setPageMarksOffset(UnitConverter.toUnit(Length.zero()));
        return preset;
Editing the profile to use none for standard compliance allows the export of the PDF.

SAP Netweaver 7.2 developer edition installing

Hi guys,
I'm a functional consultant and really interested in learning some basics developments stuff in SAP. So I'm trying to install SAP Netweaver 7.2 developer edition, and when I checked the prerequisites in sapins and error came about environment variable CPIC_MAX_CONF and JAVA_HOME
could you guys help me in this ...

Hi,
EHP2:
looking at
https://websmp110.sap-ag.de/ocs-schedules and
https://websmp110.sap-ag.de/pam
it's not released (GA).
br,
Tobias

MDM 7.1 Developer Edition

Similar Messages

Maybe you are looking for