MDM 7.1 integration with PI 7.0

Hi,
Is it possible to connect MDM 7.1 with PI 7.0??
Thanks in advance,
- Saravanan

Hi Saravanan,
We can very much use PI 7.0 with SAP MDM 7.1.
Refer https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/604b3c0c-5b6c-2b10-cc83-a7af75c70eaf&overridelayout=true
(Slide 9)
Hope it helps.
Thanks,
Minaz

Similar Messages

SRM MDM 3.0 Integration with PI 7.1

I have the integration scenario where Supplier list need to transfer from SRM 7.0 to MDM 7.1 using the PI 7.1.
Imported the content into ESR (SRM Server 7.0,SRM MDM catalog 3.0 ) . I have 2 issues.
1. Try to transfer the process integration scenario from ESR to ID , I am able to see the SRM_MDM_Catalog_30 scenario. But when it did not allow me to assign the business systems and connections .
It throws an error saying that" Cannot load action; check whether all the required actions have been released in the Enterprise Services Repository". So I have done all the steps manually.
I have created the Interface determination with the following details :
Sender Interface: CataloguePublicationRequest_Out
Sender Namespace: http://sap.com/xi/EBP
Receiver Namespace: http://sap.com/xi/SRM-MDMCatalog
Receiver Interface: MDMSupplierListTransmission_In
The issue is, it does give me the option to select the any operationmappign with the above details.
Any steps in ESR missing or any CacheRefresh issue?
Thanks in advance for any suggestion.

Check the Operation mapping,like what is anbound interface and outbound interface, these details should match with interface determination details(outbound interface details).if you have configured perfectly then it will show the operation mapping.
still if you have a problem then better to refresh the cache,it will solve the problem.even you can manually type the operation mapping name in Interface determination,and test end to end.
if it is also not working out,then create one interface copy objects from two name sapces http://sap.com/xi/EBP
, http://sap.com/xi/SRM-MDMCatalog . and finish ESR and and finish ID too..
Regards,
Raj

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

MDM Integration with ERP system

Hello MDM Guru's.
In our system Landscape, use Baan ERP system to fetch data into MDM, cleanse it and push data to SRM/BI system for Business Requirements.
Our MDM is neither connected to any R/3 (ECC) system. we want to have a kind of Reports developed for MDM Data present in our system based on Companies (our Manufacturing sites) and have a automatic mapping of our Manufacturers , Suppliers & Customers based on Global and local Stratergy.
According to my understanding, we can use MDM API's (ABAP or Java). As MDM is not integrated with any of the ERP (ECC or Netweaver Data base)?
We have options to integrate MDM with ECC 6.0 & Netweaver system. Which could be a better option to connect with? we are planning to integrate MDM with E-Portal too, could Portal data base be used.
Please guide me.
Thanks in advance
Cheers
MSR

Hi Srihari,
If you want to use MDM in you landscape and store and cleanse data in it and then sent the cleansed data to a reporting tool for analysis then you can do it in one of the methods:
- Either connect MDM to the other systems in your landscape using XI as the means of data trnasfer
- Or connect MDM to other systems using the API.
In the first method.you need to use PI/XI to manage the flow of master data to and from your MDM system to others. MDM can be used for data cleansing and enrichment within MDM before syndicating it out.
In the second method you can connect to MDM through other systems using the API.
As you mentioned about reporting on the master data in MDM based on the Companies or manufacturing sites etc.You can achieve this suing MDM ABAP API.
ABAP can be sued as a reporting tool.wherein it will connect to your MDM system through the configured API and fetch the MDM data and generate simple reports .
If you wish to access the MDM data online you can use portal front end. but in this case portal wont be capable to store any information as it is just a front end.
You will have to use MDM as a backend storage system.JAVA API can be used for futher customization on EP.
For ABAP API use you can refer the below link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/tip%2b%2bMDM%2bABAP-API%2b%2bThings%2bto%2bRemember%2b(for%2bStarters)(abap api)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116 (abap api)
For Java API you can refer the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49 (Java API)
Hope It Helped
Thanks & Regards
Simona Pinto

Test/Trial project on MDM and XI integration.

Test/Trial project on MDM and XI integration.
I want to try out a test case scenario where in i would be importing and exporting data to XI (Using XML files i guess)
I am a newbie in MDM integration.
Please help me out with my trial project.
What i already have:
I have MDM system and repository on which i have been learning basic MDM designing a (test)repository of my own.
What information i need:
-What all system requirements (XI system configuration and all) are needed to established. (What all should i be asking the XI and the system admin guys to be able to get the platform ready for me.*
*-The further procedure for actual integration to be done for importing/exporting data as in a real time project scenario

Hi Gaurav,
SInce you want to try a test scenario including MDM and XI, I would suggest you to try
ECC -> XI->MDM scenario
Wherein you can take the data from ECC in the form of IDOCs and convert them into XML.
You can then import the XML into an MDM repository. MDM repository can be a Customer, Material, Vendor etc repository. Hence extract the similar data from ECC.
Kindly follow the steps below:
1) Firstly you will have to extrcat the look-up table data from R3 using MDMGX transaction-
Please follow this link to know about the same:
How to Configure Master Data Management Reference Data Extraction -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0740b31-a934-2b10-2e95-af2252991baa
https://websmp203.sap-ag.de/~sapidb/012006153200000394732006E/MDM554_GenericExtactor.pdf
2) For loading the main Table Data into MDM, kindly follow the link below, which will guide you to the config/prcoess that will be required for the data to be uploaded from R3 into MDM.
2.1) R/3-XI-MDM (Outbound Scenario)
You will have to extract the data from R3 in the form of IDOCS and then using XI, you will have to convert them into XML format as MDM understands that.
2.2) For the process of Data from MDM back to R3, kindly refer this link below:
MDM-XI-R/3 Integration
2.3) For general info about this scenario, kindly refer this link below:
MDM Mass data Integration with R/3 made easy
Please follow these links for additional info-
1) SAP Network Blog: XI Configuration for MDM Integration - Sample Scenario-
XI Configuration for MDM Integration - Sample Scenario
2) The below given blog can be used to understand the XI config done when data is sent back from MDM via XI to R3.
MDM->XI->R3
MDM-XI-R/3 Integration
3) MDM 5.5 data distribution using SAP XI -
MDM 5.5 data distribution using SAP XI
Hope this information helps.
Thanks and Regards
Nitin jain

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

Tutorial: Azure Active Directory integration with Igloo Software

Click reply and tell us what you think:
Tutorial: Azure Active Directory integration with Igloo Software
Markus Vilcinskas, Knowledge Engineer, Microsoft Corporation

Hello
Can you be little clear, what you have tested with Airwatch MDM cloud?.. which scenarios?..
1) Device Enrollment ?
2) Access to Airwatch console?
3) Access to Airwatch self service portal?
By following the steps We do not get it working at all. by the way some of the steps in this tutorial are unclear and outdated;
I finally personally figured out how things should look like, and make it work but only with Device Enrollment scenarios from the mobile devices itself. not from the pc and browsers or from the Access panel.

Any PIP available for Product Data Hub(PIM) integration with AppsR12

Dear All,
We can a requirement to one of our customer, we need to implement MDM(CDH,PIM) and we need to integrate this with other spoke systems like EBS.
we want to know whether is there any PIP available for MDM(PDH or PIM) integration with Oracle Apps R12 with any other system and our SOA environment is SOA 11g.
Thansk in Advance
Regards
Murali

Hi Shamshad
We also need to know AIA 3.1 MDM (PDH) PIP's were released for 11g FMW. AIA 2.5 MDM PIP's uses 10g AS (SOA 10g).
Edelivery doesn't have MDM PIPS listed for AIA 3.1 or under AIA 11g. It has foundation pack but not specific to MDM PIP for Product that I'm looking for.
Any help appreciate it.
Thanks, Nara

Oracle Meter Data Management Integration with SAP ISU

Hello Everyone,
I am aware of the fact that Oracle has released a Media pack for the subject integration as discussed here and that media pack works only for SAP ERP 6.0 EHP 5 with ISU_AMI_2.
We have got OU MDM Release 2.1 Media Pack v4 and SAP ERP 6.0 EHP 4 with ISU_AMI_1 and hence Adapter in MDM won't help to achieve integration with SAP as our SAP EHP is lower than what is required for the MDM adapter. We have got SAP PI which would help the SAP End in the integration.
What are the possible work-around(s) to achieve the integration between Oracle MDM and SAP ISU without using the Media Pack/Adapter?
How does MDM exposes its services (inbound/outbound) to be consumed/triggered by External systems (i.e. SAP ISU)?
List of Services (inbound/outbound) exposed by Oracle MDM for integration?
Your time and help is much appreciated.
Regards,
Adil Khalil

Did you find the document Oracle Utilities Customer Care and Billing - Meter Data Management Integration Implementation Guide?
I searched on eDelivery and Oracle Support, but cannot find the document.

XI - MDM - Web Dynpro Integration..

Hi,
Can you please explain me the steps used for integration of XI - MDM and Web dynpro integration..
I need the front end through web dynpro that has the data from MDM tables (Read / Write) and also store the data from MDM into a flat file with multiple records.
Thanks
Mamta

Hi,
Have you seen this weblogs:
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
/people/sriram.vasudevan3/blog/2005/09/01/mdm-55-data-distribution-using-sap-xi
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
/people/steffen.nesper/blog/2007/01/05/master-data-management-posting-confirmation
---Satish

OIM 9.1.0 Integration with Active Directory 2008 R2

Hi,
My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
Any guidance is really appreciated.
Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
Is this a working and supported scenario by OIM v9.1.0 ?

I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
-Bikash

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

Session keep Alive when EBS is integrated with OIF acting as SP

We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
Sarbashis

It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM...

MDM 7.1 integration with PI 7.0

Similar Messages

Maybe you are looking for