MDM configuration
Hi all.
I know there are many posts on MDM configuration,but I could not find anything of any help to me.
My question is:
I had installed MDM on my system(Win XP) .
I DB used was (Oracle 10g Express Edition).
How do I configure the Server Repositry , so that it will connect to the Database .
I have no clue.
If any body give me the configuration details it will be good.
I have the SAP configuration guid ,but could not figure out on linking the MDM server with DB.
Help will be highly appreciated and rewarded.
regards,
Hi,
Please After cliking Mount server if your server is not being displayed,By right clicking mount MDM Derver on your SAP MDM Server, manually in the Mount MDM server Pop up window, write IP address or your host-name of machine on which MDM Server is installed then Press ok and check is your MDM server is mounted this time or not, if it get mounted right click on it and follow as i described earlier.you can check ip address of MDM system by run command prompt and type ipconfig and enter, here your can see your IP address and write this IP address and then your MDM server get mounted. if your MDM server service is then you can see green color sign on your Monted MDM server and then right click on your Mounted MDM server and select DBMS Settings.
Hope it helps you
Mandeep saini
Edited by: Mandeep Saini on May 24, 2008 1:33 PM
Edited by: Mandeep Saini on May 24, 2008 2:14 PM
Similar Messages
-
Portal Content Guide for understanding the MDM Configuration.
hi friends,
I need Portal Content Guide for understanding the MDM Configuration pdf file..
please send that file in pdf format
thanks
ramuHi,
You can access the below link.
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c87d0243e56f75e10000000a1553f6/frameset.htm]
Regards,
Jitesh Talreja -
QUALIFIED RANGE MAPPING/PI-MDM CONFIGURATION FOR AUTOMATIC SYNDICATION
Hi Experts,
I am setting up automatic import and syndication using an xml schema to a qualified lookup, will this be able to work? I made tuple to work but not with a qualified lookup even the mappings are all corrent, the import doesnt work.
We are using the MDM-PI Adapter instead of the File Adapter to automatically syndicate, Is it possible to create multiple channel? As when we configure the message starts to branch to the other channel since they have existing mapping but different remote port. Other port was configured as Manual while the new one was automatically to syndicate? Is there a workaround to this?
Many thanks!Hi Elizabeth,
This is true that it uses only Numeric values while defining Qualified Range using Remote System of MDM Console.
But it doesn't allows to key the remote system details all alone for the internal number range as its using a qualified range.
I didn't get you exactly here, if you mean that you want to syndicate records on the basis of account number and want to generate customer number which is numeric then its possible. For this the Qualified field which is look-up to some sub-table, for this sub-table Key mapping Property should also be Yes.
Please refer step by step guide to make use of qualified range:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/807ce1ba-94c0-2a10-a398-afdfd8135ebd?quicklink=index&overridelayout=true
Kindly let me know if you are looking for something else
Regards,
Mandeep Saini -
SCCM 2012 R2 MDM configuration
Hi All,
I am configuring MDM with SCCM 2012 R2 and want to know how to configure without single sign in option, is it possible to do so ? Please provide me a guide if it is possible.
Regards,
Chamila.Yes, you can configure it without single sign-on. For a guide see:
http://www.windows-noob.com/forums/index.php?/topic/9569-how-can-i-manage-modern-devices-using-system-center-2012-r2-configuration-manager-part-1/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Basis Consultand Role in MDM Configuration
Hi Gurus
I would like to know , what exactly is the role of basis consultant in installing and configuring SAP MDM Server.
If anyone can tell responsibility of BASIS Consultant while installing and Configuring SAP MDM Server , it will be very helpful because none of the configuration documents specifies which part is to be done by BAsis pesron and which by Functional consultant.
Points will be rewarded for helpful answer.
Thanks in advanceHi,
Please perform these steps accordingly:
As per my knowledge, Please perform these steps to maintain good MDM server:
1. Periodically check log files in Server folder under SAP MDM 5.5. and archive unnessary files on other drive.
2. Also do same activity for Import and Syndication server, because log files took extra space and will be generated on daliy basis.
3. Periodically take archives of repositories on local drives.
4. Do minimize use of extra languages for Repository, calculated fields, indexes etc.
5. Use update indices to minimize data inconsistency.
6. You can use CCMS for monitoring MDM performance including Import, syndication, and layout server. use tcodes rz20, rz21 etc.
7. Archive data from ready and archive folders on local disks.
All Log files sre available in corresponding components folders under SAP MDM 5.5 folder.
One more thing to mention is always update your MDM GUI clients and server according to new builds to avoid bugs or different issues related to specific build.
Now SP06 is available to download, you can continue with that.
In addition to those points:
you have to be more specific about first taking repositories archives from old version of server and then unarchive them on new mdm server.
Language specification of mdm repositories: dont use unnessary languages in repo. it will affect server performance while uploading them.
Rewards if helpful.
BR,
Alok
Edited by: Alok Sharma on Feb 4, 2008 2:01 PM -
Mdm configuration in solution manager
hi
can anyone give me the navigation to be followed in solution manager to setup a implementation project for sap mdm 5.5 ( for any it scenario or business scenario ) in solution manager 4.0 .
thanks in advanceHeiii,
Please follow these links :
/people/evan.stoddard/blog/2006/01/03/sap-solution-manager-new-info-blog
/people/luisfelipe.lanz/blog/2006/02/07/installing-a-solution-manager-diagnostics-the-easy-way
/people/federico.babelis2/blog/2006/04/08/the-benefits-of-using-sap-solution-manager-in-your-netweaver-infrastructure
hope this help.Please reward if you find it useful.
Rgds
Deepak -
Problem in configuration of MDM 5.5
Hi,
I have installed MDM 5.5 on separate machine and on the other box I have XI 3.0 which is a local installation.Now i want to integrate MDM and XI according to MDM configuration guide. I am not sure about the configuration for MDM side.
Could anyone suggest me the step required to use IDOC adapter regarding this matter.
Thanks
NiteshHi Nitesh,
which problem are you facing exactly?
There is a nice XI Configuration Guide which states details on how to setup IDoc adapter, which are not listed in the MDM config guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/52a10ae0-0701-0010-4cb5-d8cd85593731
Important chapter is 9. Integration of Business Systems Using the IDoc Adapter.
Also there is this weblog /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi showing some screenshots of the different steps.
Best regards
Christine -
SRM 7.0 and SRM MDM Installation query
Hi,
I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
1) Do I need to install any other servers other than this like EP and PI etc?
2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
Prerequisites
1. SRM Server- Installed with ORACLE database
2) For SRM MDM
Ø Download the SRM-MDM Catalog 2.0 installable from Market Place-- Done
Ø Install the MDM Server and other GUI Clients--Done
Ø UnArchive the SRM-MDM repository available with the installables only
Need help for
. Not able to find DBMS server
. User
. Password for DBMS setting
Ø Deploy the two SCA files - MDMJavaAPI and SRMMDMCAT on WAS and restart the Portal- Done
Ø Access the Config UI by using the URL http://:/SRM-MDM/SRM_MDM and change the layout as per the requirement. In this you can specify the fields to be displayed for Search, type of UI etc for the particular user
. Where I can get the "Port"
Will follow the below steps once the above issues are resolved
*Create the Web Service in SRM system and specify all the required
parameters. You should get the SRM-MDM configuration guide from Market
Place.
*Change the Org Plan in SRM to assign the Catalog to the SRM users.
*Login into EBP and select SHOP, you should get the SRM-MDM Catalog link
if all the configurations are there in place.)
3. Web Application Server
> Is seperate WAS required even after installing SRM AS JAVA stack, if yes what to install
4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
. Install SRM MDM
Do I need to install both or only one or is this not required, if I install SRM MDM my question is what is the use of
the above point 2 steps process this one
Thanks,
Jairaj
Edited by: M Jairaj on Feb 3, 2010 3:43 PMHi,
> I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
>
> 1) Do I need to install any other servers other than this like EP and PI etc?
>
As you have already installed Java stack then it will be your EP. You don't need PI for SRM MDM.
> 2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
>
> Need help for
>
> . Not able to find DBMS server
The DBMS Server property defines the network identification string of the DBMS instance / machine / server that is used by the DBMSspecific client on the MDM Server machine to connect to the DBMS. The brand of DBMS on which the repository is running is shown in the DBMS Type property.
NOTE ►► When you mount two MDM repositories with the same name (but located on different DBMS Servers) on the same MDM Server, MDM distinguishes them in the Console Hierarchy pane by appending the name of the DBMS Server in angular brackets to the repository name (e.g. u201Crepository <server>u201D).
> . User
> . Password for DBMS setting
>
ent. In this you can specify the fields to be displayed for Search, type of UI etc for the particular user
>
> . Where I can get the "Port"
>
Note 1414670 - MDM 7.1: Adjusting MDS port in MDIS and MDSS ini files
Check SAP Note 1077701 - SRM-MDM Catalog - FAQ
> 4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
> . Install SRM MDM
>
Check installation guide for this.
Thanks
Sunny -
SMTP service Migration on MDM server
Hello
We are migrating the SMTP services on the MDM server.
Do we need to make changes to the MDM configuration files, if any ?
I had installed MDM earlier and I don't remember any config file changes.
Please guide me. Thanks
PrakashThanks Christian
I had already checked the mds.ini file and I don't see any SMTP server entries.
It means that SMTP server is not configured on MDM server so far?
Nathan -
Unable to receive Queue Message Unable to create Queue in MDM 2.0.1
Hi All,
I am getting below exception when i am trying to read JMSQueue from weblogic server to MDM 2.0.1
Steps i configured as below:
Created XAI JNDI server : XAI JNDI Server(Demo), Provider URL(http://localhost:7001), Initial Connection Factory(weblogic.jndi.WLInitialContextFactory)
created XAI JMS Connection:XAI JMS Connection(DemoConn), XAI JNDI Server(Demo), JNDI Connection Factory(weblogic.jms.XAConnectionFactory)
created XAI JMS Queue: XAI Queue Name(DemoQueue), Queue Name(TestQueue), XAI JNDI Server(Demo)
created XAI Receiver DemoRx mapped with XAI Class JMSRCVR and with above configurations
MPL is creating intial context factory for jndi server properly and intializing queues properly.
But getting namenotfound exception at Receiver DemoRx
[Thu May 26 15:01:46 IST 2011] Receiver DemoRx - Read interval is 10 seconds.
[Thu May 26 15:01:47 IST 2011] Receiver "DemoRx" initialization failed:Unable to receive Queue MessageUnable to create Queue: javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '']; remaining name 'TestQueue'
com.splwg.mpl.receiving.ReceiverInitException: Unable to receive Queue MessageUnable to create Queue: javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '']; remaining name 'TestQueue'
at com.splwg.mpl.jms.queue.JMSReceiver.prepareConnection(JMSReceiver.java:394)
at com.splwg.mpl.jms.queue.JMSReceiver.init(JMSReceiver.java:266)
at com.splwg.mpl.receiving.AsyncReceiverManager$1.call(AsyncReceiverManager.java:232)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Please help me in this regard
Thanks in advance,
sukumarHi Suraj,
I would prefer to discuss the problems in the forum. There are maybe other that have the same problem and they could then participate from the discussion.
No back to your problem:
As fare as I know there is no build in function to read directly from file system.
MPL is no longer supported in this product and this was the only module for reading the file system.
You have to develop an application to fetch the files form the file system or you must use an Enterprise Service Bus
like OSB or ServiceMix.
To enable the system for the IMD import you have to publish a Business Object or Script via XAI Inbound service.
The recommended way is to use the D1-IMDSeeder BO.
There is a chapter in the MDM Configuration Guide, explaining how to setup the XAI Inbound service.
There is also a service script available. The advantage of the service script is, that you can import IMDs for more than on device (D1-IMDEvtUpl and DM-IMDEvtUpl). The DM-IMDEvtUpl is eventually only in the demo database available.
The disadvantage of the IMDSeeder is, that you have to setup a lot of configurations in the system. There is another thread in the forum explaining the setup.
My preferred way is to use the D1-InitialLoadIMDScalar or D1-InitialLoadIMDInterval BO but you have to do a lot of things by your own.
/Markus -
Hi Experts,
I have a requirement of achieving SSO in MDM EP implementation.I have my portal and MDM configured to LDAP.Now my questions are
a)Does trusted connection API work fine with LDAP user in MDM.I mean say if user is XYZ in LDAP then if I pass this as username in parameter will the API support it if my MDM is in sync with LDAP.
b)Do u have any limitations to this approach or key constraints
c)Are changes to LDAP username ,role etc are replicated to MDM on regular basis or I have to unload and load/repair repository to see the changes
Thanks
Vinayyou are in the wrong direction.
please follow this doc
http://help.sap.com/saphelp_nwmdm71/helpdata/en/4a/8c20a0dc93203be10000000a42189b/content.htm -
Customizing Oracle Logo in MDM 2.0.1
In MDM 2.0.1, I'm trying to customize the Oracle logo, as per the instructions mentioned in the Installation Document :
I. Place your <Custom_Logo_File>.gif in $SPLEBASE/etc/conf/root/cm
II. Create an External Navigation Key :
1.Open the browser with url : http://<hostname>:<port>/cis.jsp?utilities=true&tools=true+
2.Then, go to AdminMenu-->N-->NavigationKey+
3.Create an External Navigation Key with url : http://<hostname>:<port>/ouaf/cm/<Custom_Logo_File>.gif+
It didn't work from these above steps., please help me in this regards..
Edited by: Suraj Keerthi on May 4, 2011 4:08 PMHi Suraj,
I would prefer to discuss the problems in the forum. There are maybe other that have the same problem and they could then participate from the discussion.
No back to your problem:
As fare as I know there is no build in function to read directly from file system.
MPL is no longer supported in this product and this was the only module for reading the file system.
You have to develop an application to fetch the files form the file system or you must use an Enterprise Service Bus
like OSB or ServiceMix.
To enable the system for the IMD import you have to publish a Business Object or Script via XAI Inbound service.
The recommended way is to use the D1-IMDSeeder BO.
There is a chapter in the MDM Configuration Guide, explaining how to setup the XAI Inbound service.
There is also a service script available. The advantage of the service script is, that you can import IMDs for more than on device (D1-IMDEvtUpl and DM-IMDEvtUpl). The DM-IMDEvtUpl is eventually only in the demo database available.
The disadvantage of the IMDSeeder is, that you have to setup a lot of configurations in the system. There is another thread in the forum explaining the setup.
My preferred way is to use the D1-InitialLoadIMDScalar or D1-InitialLoadIMDInterval BO but you have to do a lot of things by your own.
/Markus -
Hi,
I am doing ECC>PI>MDM configuration, I triggerd IDoc from ECC and I need ack from MDM. The data reached to MDM and sent system ack from MDM that I can see in CC monitoring. But in PI its still waiting for ack. So do we need to do any configuration in PI side like mapping MDM ack with ALEAUD and ID configuration.
KumHi Kum,
Please check this blog:
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Regards,
---Satish -
MDM 5.5 + PI 7.0 on the same hardware
HI All,
I am planning to do MDM 5.5 + PI 7.0
System details
CPU- Intel Xeon CPU [email protected] GHz
RAM- 3.25 GB RAM
HardDisk Space- 160 GB
This is only for internal use where 4-5 users will be there for development. Are the system hardware correct or I should do some changes.
Please suggest.
note:- I have also raised a similar question in the BI forum. Reason- We have a hardware and want to utilize in the best possible way.
Regards,
JitenderHi Jitender,
Check the below link
https://websmp205.sap-ag.de/~sapidb/011000358700006267202006E
For MDM Configuration seems ok but i am not sure about PI.
Regards,
Jitesh Talreja -
Hi All,
Iam using MDM Webdynpro Component. How can i achieve duplicate check in this? When a new record is created using the item details iview i want the material number to be unique.
Can you please suggest how to go about it
Regards
SureshSuresh -
I am not sure about the typical way. but in your MDM Configurator screen you can embedd your MDM validation (provided you have made a validation for a duplicate check in MDM).
on the top of it if you want to put a custom validation out of MDM box , then there must be a custom user exit for duplicate check in Web dynpro component screen , so for that you can code it there.
later both MDM configurator and WD component code can be embedd and one validate button can be put on screen so before entering any material/customer/vendor into the system it will run those validations and provide a duplicate check.
it's always better to have a validate button in your main screen before entering any new material/customer/vendor.
HTH
thx
Deep
Maybe you are looking for
-
When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme. How do I change where appointments are put ? Or how can I choose where the appointment is put ? I use the mob
-
Ipod nano 7th gen won't charge or sync to itunes.
I recently purchased an Ipod Nano 7th generation. When I plug it in to charge or try to sync it to my computer I get an error message saying that the accessory is unsupported. I am running Itunes in Windows Vista. I have synced this Ipod and charged
-
Application custom expiration date
I have a iOS project (deployed as Adhoc) with requirements / restrictions: 1."custom expiration date" : app wouldn't launch after period of time after installation. The requirement "custom expiration date" like usual provision profile, but instead of
-
Windows 7 Professional -- Which Version?
I noticed there are many versions of Windows 7 Pro on Newegg. I know I need to get 64 bit, but do I buy the full version or the "OEM for system builders". Is the version at this link what I want? http://www.newegg.com/Product/Product.aspx?Item=N82E1
-
LDAP Performance Tuning In Large Deployments - LDAP request time
Tuning the LDAP request time <br> (tr_recv_timeout and tr_recv_timeout parameters) <p> The default is 60 seconds, and since the time will vary at each site for the length of time it will take an LDAP request to complete it wouldn't hurt to increase t