MDM connection check

How to check the MDM connections and services from Enterprise portal

Hi,
You use the System Connection test to check connectivity of all the system objects that you created to the system defined in the portal, for example MDM.
First of all server and repository should be up and running in MDM BOX.
Then
       1.      Log on to the portal as a system administrator(who have sufficient rights)
       2.      Navigate to System Administration - System Configuration - System Landscape
       3.      In the Portal Catalog, navigate to the folder in which your system object is located.
       4.      Perform a connection test for all system objects that you created.
A confirmation message appears if the test was successful.
so you can make out that cannection is successful. or from MDM side you can also check as Priti suggessted in upper post.
         If the test does not succeed
○       Check network connectivity
○       Check that the MDM Server is running and that the repository is loaded
○       Refer to the Builds Default Trace File Logs to review error messages.
Hope it helps.
Deep

Similar Messages

  • I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

    I am having a major problem connecting to FaceTime today.  Message reads "unable to connect, check network connections".  I am online, mail works, ex
    Tc.  This was not a a problem two days ago.  Any suggestions?

    Could be that the servers are overloaded today.

  • ABAP MDM Connection Pool

    Hi,
    I'm trying to write a report that extracts information from MDM. Everytime it's called, it has to establish a new connection to MDM where the hand-shake takes about 20-30 secs.
    I was wondering if ABAP MDM Connection Pooling exist.
    In Java MDM, you can configure J2EE with connection pool, so that you can reuse a connection rather than re-establishing a new connection on every call.
    I've read Thomas Jung's WIKI on "How do you implement a MDM Connection Help Class?", however I cannot reuse this class. The static attribute in the class is not persisted.
    Did I do something wrong?
    I tried turning it into a shared memory root class, however it complains about an object reference still exist and would not allow me to do "dettach_commit( )".
    Don't know any other ways to store the connection handle in memory.
    Export/Import, SPA/GPA are not OO friendly.
    Cheers
    Michael

    Hi Andreas,
    Thanks for your reply, it is good to confirm my understanding of the ABAP API connection.
    For your interest, I have changed part of the connection code to increase the speed of the connection significantly.
    Firstly to clarify, the connection from the ABAP stack to MDM is actually quite fast.
    Upon the first call, the method CL_MDM_PROVIDER_SP04_PL03->_LOAD_FIELD_INFORMATION is called which reads the META-DATA from MDM for every table and every field. This could normally take 1 minute in our system landscape. I've changed to code to buffer the meta-data.
    In a production/stable environment, it is unlikely for the META-DATA to change rapidly. Hence reading this on every connection is a waste of time.
    This could be useful only if we are in implementation phase where this changes all the time.
    1) In transaction MDMAPIC, I've added the ABAP implementation for MDM Version Support as my own MDM provider class ZSP04_PL03 with provider type ZCL_MDM_PROVIDER_SP04_PL03.
    ZCL_MDM_PROVIDER_SP04_PL03 is a copy of CL_MDM_PROVIDER_SP04_PL03.
    2) In ZCL_MDM_PROVIDER_SP04_PL03, the method LOADFIELD_INFORMATION is changed to read from buffer first before calling MDM. If the buffer is empty, it will read from MDM and store result into buffer etc.
    I'm storing the information in a transparent table at the moment.
    I buffer the three class attributes:
    - mt_field_meta_data,
    - mt_mdm_field_meta_data,
    - mt_field_code2id_map.
    As MT_FIELD_META_DATA is a complex structure (i.e. tables within table), I had to split it up into many different tables.
    I can provide the code if you are interested.
    Cheers,
    Michael.

  • Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Have you tried re-booting your WiFi router ?  It may seem OK on your PC, but a re-boot may help.

  • I have I pad 2 and every time I try and get on message or FaceTime it says cannot connect check internet but I have full signal I have tried everything but no luck

    I have I pad 2 and every time I try and get on message or FaceTime it says cannot connect check internet but I have full signal I have tried everything but no luck

    Try this:
    Settings>General>Date & Time>Set Automatically>On

  • TCP connectivity check failed for subnet

    hi
    im trying to add a node to my 11.2 grid infrastructure and the cluster verification is returning error
    Check: TCP connectivity of subnet "152.15.123.0"
    Source Destination Connected?
    inode2:127.0.0.1 inode2:152.15.123.4 failed
    Result: TCP connectivity check failed for subnet "152.15.123.0"
    this happens when i run cluvfy with pre nodeadd option, there is no other failure ...
    any idea what it could be ?

    Hello Buddy,
    Please note that inode2:127.0.0.1 is using loopback IP, please check your network configuration and retry the cluvfy operation.
    Cheers,
    Rodrigo Mufalani
    www.mufalani.com.br/blog

  • RAC - Cluvfy - TCP connectivity check failed for subnet

    Hi ...this is Oracle RAC 10.2.0.4.0 .. has anyone witnessed this check failure or is able to comment on how I should debug the same
    ./runcluvfy.sh stage -post hwos -n all -verbose
    Check: TCP connectivity of subnet "172.30.182.0"
    Source Destination Connected?
    sekiazu0230:172.30.182.67 sekiazu0231:172.30.182.68 failed
    sekiazu0230:172.30.182.67 sekiazu0231:172.30.182.68 failed
    Result: TCP connectivity check failed for subnet "172.30.182.0"
    Interface information for node "sekiazu0230"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    en0 172.30.182.67 172.30.182.0 172.30.182.67 172.30.182.1 1E:40:3D:1C:96:02 1500
    en0 172.30.182.67 172.30.182.0 172.30.182.67 172.30.182.1 1E:40:3D:1C:96:02 1500 ===> Duplicated ?
    en1 172.30.190.48 172.30.190.0 172.30.190.48 172.30.182.1 1E:40:3D:1C:96:03 1500
    en2 10.252.34.9 10.252.34.0 10.252.34.9 172.30.182.1 1E:40:3D:1C:96:04 65390
    Thank you for all feedback
    Steve

    Hello Buddy,
    Please note that inode2:127.0.0.1 is using loopback IP, please check your network configuration and retry the cluvfy operation.
    Cheers,
    Rodrigo Mufalani
    www.mufalani.com.br/blog

  • Imessage wont connect using my apple id says can not connect check network conection and my network connection is fine what do i do

    having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this

    i have the same problem but i didnt update

  • Automation of Smartview Connectivity check

    Hi Friends,
    I have few Smartview URLs ( http://server:port/workspace/SmartViewProviders, http://server:port/hfmofficeprovider/hfmofficeprovider.aspx ) using which I use sometimes to check only connectivity through MS Excel.
    Is there any way I can automate this Smartview connectivity check (any command line option, any Web-Url access method etc. which can be automated.)
    ----Sunny

    Sunny,
    Check and see if the EPM validate tool give you the information you seek.  If so you can schedule the .bat job for checks.   http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_1112200.pdf p.303.  There are URL checkers (3rd party as well.

  • E66 "internet: unable to connect check connection ...

    I recently did a hard reset on my e66. It overwrote all my userdata and settings. since that day i cannot use my WLAN connection anymore. whenever i try to start browsing using my WLAN connection it takes around a minute and then times out saying e66 "internet: unable to connect check connection settings"
    i tried a firmware update and everything.
    The AccessPoint is configured properly on my pohne and worked with the same settings prior to the reset. I checked all the settings on the phone. Whenever I try to establish a connection to my network it times out. i willingly changed some settings to wrong values. all lead to the corresponding error messages. but when i enter everything correctly i always get that unable to connect message.
    I have the problem with or without SIM-Card.

    Might be a router or accesspoint problem.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • When using outlook and trying to retrieve my emails, my system is in this continual cycle of Connecting, Checking for mail, updated -

    When using outlook on my iphone and trying to retreive my emails, my system is in this cycle of connecting, checking for email, updated - This cycle loops after 3 seconds and begins again - I'm still receiveing my mail but it is draining my battery at a rate of 20% per 15 minutes

    Outlook is a mail client for PC's and Macs. There is no such thing as "Outlook" for iOS.

  • PI to MDM Connection Problem.

    Hi Experts;
    I have a connection Problem. I Sent data from r3 to PI System.PI System Convert Idoc to xml and sent to mdm server but PI cannot connect to mdm server. I Controled my connection information ip and mdm repository name is true . but I dont see ServerUser Id .
    How I see and change this server user ?
    Can you help me !
    "MDM Adapter listener could not start due to: Can not create repository session '<server=192.168.10.35 serverUser=Admin repository=p0349 user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server '192.168.10.35' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer"

    Hi Turgut,
    How I see and change this server user ?  As scenario is R/3>PI>MDM.
    You need to look into your receiver Communication channel in Integration Directory (Integration Builder) where you have settings for defining MDM Server, Repository , Repository User and Password , Port Code of the Outbound MDM port etc.
    Please find the below link to check settings for  Setting Up Inbound Messaging into MDM.
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9854884d3217cee10000000a421937/content.htm
    There is no Server User ID but it is Repository User and Password along with other parameters in Communication channel.
    Note: Make Sure that your MDM Import Server is also running.
    Regards,
    Mandeep Saini

  • MDM Record Check out and Check in from the Portal

    Hi everybody,
    I'm trying to figure out what is the standard way to trigger the Check out and Check in from the Portal.
    How do I need to configure the MDM workflows and the Portal, so the standard Item Details iView would automatically check out the record when the Edit button is pressed.
    Do I need to configure Guided Procedures or UWL on the Portal or can I avoid that?
    Thanks for your help in advance,
    Boris

    Hi Boris,
    When we connect MDM to a front end system like Portal,the portal will replicate all teh functionalities of the backend sytem from the front end as in this case in EP.
    But when we maintain Master data form the MDM Data Manager we get a lot of options in the context menu ,when we right click a record in the record pane.
    All of these cannot be made available on the portal,but however the feature of Checkout can be made possible if you try to update the record  through a MDM workflow.
    As in MDM workflow you have to option of Checking ou the record at the beginning of the Uddate and then checking in back at the completion of the record update.
    For this you can use the MDM workflows and integrate it through EP using UWL.
    Kindly refer some additional docs which will guide you in the configuration of the same:
    Re: MDM workflow with UWL
    Re: Need to Integrate Universal Worklist in SAP Master Data Management.
    Re: MDM Portal configurations.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Assertion file: causes drop in MDM connection?

    Hi,
    We are seeing some intermittment problems in MDM and the only thing that really correlates are these entries in the Assertions log file.  The following log entry will show up multiple times at a given time:
    <Assert ts="2009/05/12 16:43:05.497 GMT" tid="19864" entry-no="491136" file="..\..\..\Database\A2iDbConnection\OLEDB_DBConnection.cpp" line="1777">false</Assert>
    Can someone explain what could be the cause of this?  And could this cause a Java API connection to drop? 
    Thanks in advance.

    Hi Charinde
    1)You need check network connection to MDM Server and from MDM Server to Oracle DBMS
    how to do it see at:
    https://websmp201.sap-ag.de/~sapidb/011000358700001119842007E
    2)Maybe you install different(new) version of SAP MDM applications or services? Check it too.
    Best regards

  • SAP MDM Connection with WebDynpro Java

    Hi,
    I am working with SAP WebDynpro Java (UI) and SAP MDM (Database). I had added the respective jars-
    a) I want to test whether I am able to make a connection to the MDM server. Let me know input parameters (sample source code required) which I need to pass from SAP WebDynpro Java (UI) to make a successful connection to MDM (DB). Please let me know this in details.
    b) After making connection to MDM, I need to write a query where I need to pass Lot No1 & Lot No2 from WebDynpro Java (UI) & check in a MDM table numbers of records existing and later display  the corresponding records details  (sample source code required) in the screen.
    Your inputs will be highly appreciated.
    Thanks.

    Anmol,
    Depending on what version of WAS you are on...you might have WDJ components available that you can use. Just to offer a different view on your question.
    Otherwise follow the links above or the following link to get sample code.
    Read MDM ItemDetail Record in WDJ
    You should get lots of sample code on SDN.
    Thanks,
    Praveen.

Maybe you are looking for