MDM integration without Solution Manager

Hi All,
I hope we can have MDM implementation without solution manager. (Please correct me if I am wrong.)
Can anybody explain me the concerns if I don't have solution manager in my MDM implementation framework.
Customising Steps to integrate all the components with MDM Server.
Thanks in advance,
Regards..
Sambhaji

Hi Sambhaji,
Which release are you referring to?
The current release SAP NetWeaver MDM 5.5 does not require Solution Manager for implementation. (Customizing tasks are done in the MDM Console).
As far as MDM 3.00 is concerned, the Solution Manager is used for Customizing synchronization and distribution. Please refer to the relevant Master Guide in the Service Marketplace for further information.
Regards, Markus

Similar Messages

MDM Integration with Solution Manager

Hi Gurus,
Can any one explain me the process to Integrate MDM 7.1 with Solution Manager?
Thanks,
Anil

Hi Anil,
documentation is generally available on [Service Market Place|http://service.sap.com/installmdm71]. You might find the How-to Guide Configure the MDM Administration Cockpit helpful.
Best regards
Michael

Are you utlizing SAP's Quality Center with Integration to Solution Manager?

Hello,
I am interested in hearing from folks who are utilizing SAP's Quality Center with or without Integration to Solution Manager. Please post your experience on setting this up and realizing the benefits, i.e. efforts involved, what features of HPQC you are using, is it a good tool to use for integrated SAP testing etc.
Thanks in advance for your help!
Abu

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

ECATT integration with solution Manager

Hello Colleagues,
Please let me know if any of you have worked on integration between Solution Manager and eCATT.
I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
Any info would be of great help.
Thanks,
Ajay

Hello Ajay,
Have you seen these links?
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
Regards,
Paul

Business process (Integration) monitoring - Solution Manager?

Hi Experts
I have a requirement here for business process monitoring at my client. The client wants to have a solution for monitoring of few key business processes for example incoming orders. The flow data flow is as follows: third party system -> AS2 -> XI1 ->XI2 -> MQ->ERP. Ideally, all the incoming messages should be processed within 3 minutes of sending by thirdy party system. The basic requirement from business to have a view of the number of messages sent by the external system and numbers of orders created in the system and if there is any message with processing time of more than 3 minutes, it should be reported. Also, if there is any failure in any of the points of failure - the reason of failure needs to be reported
I am thinking of using solution mnaager diagnostics and willy introscope for collecting data from XI Adapter framweork and Integration engine and the ERP system.
My queries -
Can solution manager fetch the data from non SAP system - AS2 service/MQ etc? if yes, how?
The solution i am thinking of - is it good one or is there any better solution - light weight/performance efficient?
In case i go ahead with the approach mentioned above, would there be an extra licensing cost for installing SMD agents and Willy on different applications?
Can we do a simple reporting i ERP system by fetching data from XI1 & XI2 systems? I understand that it wouldnt give us any details of the Java components or non SAP applications, but keeping in mind the limitations, is it a viable solution?
Any inputs would be great.
Regards

HI Ethan,
I'm not sure about the BPMon framework in Sol MAn 7.0 if it can be used with PI or not. I remember from teched that the end-to-end monitoring for PI was available only in 7.1 and with SAP PI 711.
From what I know wily gives you information about the status on the system (CPU, memory consumption etc) and not about the message flow so you can still use it but for the technical monitoring set up.
Also in teched I have participated at a hands-on workshop (ALM361 [http://www.sapteched.com/emea/edu_sessions/session.htm?id=542]) where we enabled the BPMon framework to use webservices provided by a non-sap application.
Hope this helps.
Regards,
Horia

How to include an enhancement package with upgrade without Solution Manager

Hello,
I have been trying to do an upgrade from SAP R3 46C to ERP6 in my sandbox. I want to include Enhancment package 3 with the upgrade. I have tried using the Solution Manager to download the Enhancement package and it work fine except that it did not create the XML Stack configuration file that the upgrade is looking for. Therefore I downloaded the DVD for Enhancement package 3 and included that in the mounted CDs in the PREPARE portion of the upgrade and it does not recognize it.
Now for my question, is there a way to include the Enhancement package with the upgrade without using Solution Manager? If so, could someone please let me know where to find the information or share the procedure with me?
Thank you in advance,
Ron

The EPs are just like support packages (optional); if the upgrade is not letting you put it during upgrade then just do it once the upgrade is completed.

SAP CPS Redwood integration with Solution Manager 7.1 SP8

Hi experts,
I need your help..!!
We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
Regards
Zohaib

hi,
dont have any explicit step by step doc for CPS integration
but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
some more on SAP Central Process Scheduling by Redwood (CPS)
Thanks
Jansi

Mdm configuration in solution manager

hi
can anyone give me the navigation to be followed in solution manager to setup a implementation project for sap mdm 5.5 ( for any it scenario or business scenario ) in solution manager 4.0 .
thanks in advance

Heiii,
Please follow these links :
/people/evan.stoddard/blog/2006/01/03/sap-solution-manager-new-info-blog
/people/luisfelipe.lanz/blog/2006/02/07/installing-a-solution-manager-diagnostics-the-easy-way
/people/federico.babelis2/blog/2006/04/08/the-benefits-of-using-sap-solution-manager-in-your-netweaver-infrastructure
hope this help.Please reward if you find it useful.
Rgds
Deepak

BCP Microsoft Platform integration with Solution Manager

Hi
Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
If so how? Is there documentation available explaining the process?

Hi Johan,
There is some level of integration available with Solution Manager. To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
Thanks.

Peoplesoft integration with solution manager

Hi Experts,
I would like to know whether peoplesoft can be integrated with SAP solution manager and whether other third party applications can be integrated with Solman... it can be helpdesk, monitoring or any other scenario... Please pass on any information that you might have

I'm also interested in this topic because we want to integrate incidents and changes reported by the solution manager in a Peoplesoft S3 helpdesk.

Mdm implementation with solution manager

hi
i heard we can do implementation of sap mdm with solution manager .
can any body tell me wheere is the implementation guide for sap mdm in solution manager
thanks
if u have any material on mdm please send me on : [email protected]
thanks a lot
akhil

Hi Akil,
did you find the answer to your question?
Points will be generously accorded
Thanks!
Mircea

ABAP sneak preview (NSP) patch without Solution Manager after patch 11

I'm wondering if there is any plan to allow us ABAP sneak preview users to patch our system beyond patch level 11. So far I kept my NSP system up-to-date by patching it regularly. But now the Solution Manager is required to download the current patch level 12.
Is there any SolMan sneak preview available? Is there any add-on to upgrade the NSP itself into a SolMan system? - After all SolMan runs on 2004s ...
I noticed that trial version with SP12 is out - does this mean that the new strategy is to replace with each and every SP the Sneak-Preview-System? If there wasn't the lengthy (and often painful) setup I wouldn't mind. On top one would have to export and re-import all developments and configurations one would like to keep. Can you (SAP) not simply provide for us non-SolMan-havers the Service Packs as a simple and much more compact download (compared to the entire NSP download) ?

Hi George,
Try to delete the registry keys mentioned here Re: How to uninstall Netweaver 7.0 ABAP trial version ?
To use it, run the clean up tool for the registry, press the radio button for 'Uninstall Service', enter 'NSP' for SID and '00' for the number.
This will only delete the registry entries for the application server, not for the database.
To access the DB via MMC, the service <b>SAP DB WWW</b> must be started. To do so, go to 'Start'->'Run...' and enter 'net start sapdbwww'. After the service is started, you can use the database manager within SAP MMC or just browse to <a href="http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000">http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000</a>, which will actually use the same HTML UI.
Anyway, if the uninstallation runs normal, you shouldn't have any problems with registry keys.
Try this:
- Unistall system and DB
- Use the registry clean tool
- Delete the folder of InstallShield (usually C:\Program Files\Common Files\InstallShield\Universal\SAP)
- Reboot your system
- Start the installation again without running any application (no firewall, antivirus etc.)
Hope this helps.
Regards,
Klaus

Code Inspector integration with Solution Manager

Hi All,
I would like to integrate the Code Inspector into Solution Manager, so that changes in managed systems can be checked prior to passing to test. I wonder if any of you is aware of such a solution, or have already implemented such functionality
Thanks iin advance,
Best regards,
Ádá

Hi
please check the blog
[/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector|/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector]
and the discussion on the treads,
[Is it possible to integrate the Code Inspector in Transport Management|Is it possible to integrate the Code Inspector in Transport Management]
might be this helps
Thanks,
Jansi

Help Needed: HP QTP/UFT integration with Solution Manager

Hi Experts,
We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
Detailed steps for replicating the issue:
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
2.     Open Unified Functional Testing (UFT) 12.00
3.     Click File -> New -> Test
4.     Type even a dummy script in the Action window
5.     Save Test Script by clicking File -> Save <test name> As…
6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
7.     Error Message appears
Note:
One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
I am asked if I want to overwrite existing test in Solution Manager.

Hi,
I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
Error:
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner <IP>:3300' not reached
TIME        Tue Jan 19 12:02:17 201
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3286
DETAIL      NiPConnect2: 192.12.353.12:3302
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
Could you please guide?
Regards,
Raichand

SAP Best Practice Integrated with Solution manager

We have a server in which we installed SAP Best practice baseline package and we have the solution manager 7.01 SP 25
We maintained the logical port but when we try to check connectivity to solution manager we got the following error:
Connectivity check to sap solution manager system not successful
Message no. /SMB/BB_INSTALLER375
Can anyone guide us how to solve the problem and also if there is another way to upload the solution defined on the best practice solution builder into sap solution manager as a template project
Thanks,
Heba Hesham

Hi,
Patches for SAPGUI 7.10 can be found at the following location:
http://service.sap.com/patches
-> Entry by Application Group -> SAP Frontend Components
-> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE
-> SAP GUI FOR WINDOWS 7.10 CORE -> Win 32
-> gui710_2-10002995.exe

MDM integration without Solution Manager

Similar Messages

Maybe you are looking for