MDM PI Adapter not visible

Hi experts!
I have deployed this files to get MDM PI Adapter:
MDMCONNECTOR08_0-20008055.SCA         Connector
MDMJ71008_1-10006189.SCA                      JAVA API
MDMADAPTER08_0-10005238.SCA              PI ADAPTER
My PI version is 7.0 SP19.
My MDM version is 7.1 SP8.
I can't view "MDM PI Adapter" in list of Communication Channels in Integration Directory.
Any idea?

Hi,
see sap help: [Installing the MDM PI Adapter |http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/970f1155493987e10000000a421937/frameset.htm] and especially the part "[troubleshooting|http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9871410e0e0e27e10000000a421937/content.htm]"
And I invite you to check the oss notes on service.sap.com (use terms "MDM PI ADAPTER"), because for instance you will see these ones:
[Note 1455796 - MDM PI Adapter Compatibility|https://service.sap.com/sap/support/notes/1455796]
[Note 1614819 - MDM Adapter type not visible in PI Integration Directory|https://service.sap.com/sap/support/notes/1614819] New !
regards
mickael

Similar Messages

MDM PI adapter not working

Hi All,
we are on MDM 7.1 SP04 AND PI7.1 SP06 AND MDM Java API Version is 7.1.04.138 i.e. on the latest version.
MDM PI adapter is not able to pick up the files from the MDM distribution folders..
Communication channel is functioning and in Green.
PI adapter is only picking up the files only when i manually activate the communication chennel.
what could be the reason.are there any other prerequisites for MDM PI adapter that we are missing upon.
if any one has come across the same issues and got this sorted out ..let me know please

kindly verify the values you mentioned in:
MDM Server (host name or IP)
MDM Repository Name, along with User and Password
DBMS Server (host name or IP) and DBMS Type
Port Code and Remote System Code of the outbound MDM port
and goto RWB and check the Communication Channel monitoring of your MDM Adapter.
may be the below thread can help you :
[Re: MDM PI Adapter|MDM PI Adapter; MDM PI Adapter
thanks, BJagdishwar.

T42 and LAN adapter not visible

Hi, I have a T42, which worked flawlessly until I've had to replace the HDD in my pc and installed XP SP3. Wireless works but I cannot get the LAN adapter to work. The Intel LAN adapter is NOT visible in device mgr. I have solved all the hardware conflicts from the XP install. t42-2373-C28. How can I get the hard wired LAN to work?
thanks
Bob
Solved!
Go to Solution.

I would be assuming your installed http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZLNJB along with http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62922 ? If lead_org's test does not work. Try uninstalling the ethernet driver and see if DRIVERMAX will find the driver for you. http://www.drivermax.com/ Have you also checked the Network connections to see what it says?
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

XI Adapter not visible in CC Monitoring

Hi all,
I have configured Receiver XI Adapter for a server ABAP proxy. When I executed the scenario, I can see the successfull message in the SXI_MONITOR. But in the receiver side its not get reflected.
So I went to the "Communication Channel Monitoring" to see the adapter status. But I couldn't find the XI adapter in that monitoring.
Can any one help me?
Regards,
Jeya Kumar.

Hi Vinod ,
We are using SP12 .
And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
       I saw in JEE Admin . This Adapter is in Running mode . the parameters are
xiadapter.isconfig.username PIAFUSER
     1. May i change it to PISUPER and give password ?
     2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url
         but in CC monitoring , IE Components Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
           will that port 50080 and 51080 will cause the problem ?
Thanks.,
V.Rangarajan

XI Adapter not visible in Comm Channel Monitoring ?

Hi friends ,
I am trying a proxy scenario in Discovery System V3 .But when we create XI receiver adapter we cannot see the status of that channel in communication channel monitoring .
What could be the reason ? Any input will be appreciated
Thanks.,
V.Rangarajan

Hi Vinod ,
We are using SP12 .
And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
       I saw in JEE Admin . This Adapter is in Running mode . the parameters are
xiadapter.isconfig.username PIAFUSER
     1. May i change it to PISUPER and give password ?
     2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url
         but in CC monitoring , IE Components Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
           will that port 50080 and 51080 will cause the problem ?
Thanks.,
V.Rangarajan

No Wireless networks found (WIFI adapter not visible)

From 2-3 days , my laptop's wifi adapter was disabled automatically.
The wireless network doesn't showing WIFI option.
Therefore I am not able to connect to any WIFI network.
Please help

Hi @21_95,
Thank you for your inquiry.
I grasp that your wireless was automatically disabled and you are unable to enable it.
If you check Device Manager is there any errors on it?
You can check this setting also while you are in Device Manager.
Click on the network adapters to expand the list.
Right click on the wireless adapter and choose properties.
Click on the power management tab.
If allow the computer to turn off this device to save power is checked please remove it .
Repeat that process for any additional network adapters.
Here is link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) that may also help.
As this is a recent occurrence you could test for a hardware failure of the card.
HP Notebook PCs - Testing for Hardware Failures (Windows 8)
You could also try a HP PCs - Refresh Your PC to Resolve Problems (Windows 8) which will reinstall your Windows but should not affect your files. I do suggest that you do a backup of your files just to be on the safe side.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Receiver MDM adapter not working !!! Please suggest !!!

Hi Experts ,
mine is a idoc to MDM adapter scenerio. The idoc message is successfully passing the PI integration engine , but failing in the adapter engine ( MDM communication channel ) giving the following message.
Configuration error: Can not create repository session - server=xxxxxx.XX.XXXXXX.net serverUser=Admin repository=xxxxxxxx user=Admin]' caused by: The specified MDM repository was not found on the server (xxxxxx) Configured MDM access parameters for inbound port: [ MDM Server: xxxxx.xx.xxxxxx.net , Repository: xxxxxxxxxx , Port Code: CREMMDM0XIncrementalData , Remote System Code: ECC , DBMS Server: xxxxxx.xx.xxxxxx.net , DBMS Type: ORCL
I have tried connecting to the same MDM server using a receiver file adapter and it is working absolutely fine. But dont know why the mdm adapter is giving the following error. I have cross checked the adapter parameters with the MDM guy. They are OK.
I was wondering this was a version / service error, how can I chack the service pack of MDM Comm channel .
Please suggest . Urgent
Regards,
Arnab.
Edited by: Arnab Mondal on Jan 19, 2012 12:04 PM
Anything guys??
Any feed guys??
Edited by: Arnab Mondal on Jan 20, 2012 5:37 AM

Try a reset, which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.

SAP MDM Adapter not picking up files in Ready folder on MDM

Hello Experts,
We are sending master data from MDM 7.1 system via PI 7.1 system to SAP ECC system. The Sydnication from MDM system is automatic and the files are being syndicated successfully from MDM system and getting dumped in the Ready folder of the port.
But the Sender MDM PI adapter is not picking up the files from the folder.
The communication channel status in Communication channel monitoring is green and 'data control' is Automatically.
However the file is getting picked up if we stop and then start the channel but not automatically.
Please Help!
Thanks,
Suraj

Check if there are locks for the file channel in NWA. If yes, unlock that and your issue should be resolved.
Login to NWA --> Operation Management --> Systems --> Start & Stop --> JAVA EE Services --> check for File Connector, Locking Adapter and XPI Adapter: File.

Adapter Engine not visible in RWB

Hi Guys,
         I coudnt find the Adapter engine in Component Monitoring and Message monitoring in RWB.
while displaying the components of Integration Engine getting the below error. I am using PI 7.1
Kindly let me know where to check if the components are not visible in RWB.
java.lang.NullPointerException:
     at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:635)
     at com.sap.aii.mdt.web.MonitorDynPage.process_go_button(MonitorDynPage.java:496)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
With Regards
Pradeep N

Check page 129 of this document:
[SAP XI TroubleShooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E]

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

New fields created in MDM Console not visible on Portal iViews

Hi All
I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
Can you plase advice what is/ may be wrong?
Thank you in advance.
BR
Rafal

Hi All
After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
J2EE engine
Thank you for help.
BR
Rafal
Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Communication channel not visible in RWB

Hello everyone,
I am not able to view the communication channel in RWB. This is a HTTP sender . i have imported it but still it is not visible in RWB. what could be the reason ?
Regards,
Ravi

Hi Ravi,
In PI there are basically two types of adapter, adapter engine based and Integration engine based. Integration engine based adapters are HTTP, XI and IDOC. These adapters can be monitored from ABAP stack means from SXI_MONITOR and adapter engine based can be monitored from RWB. Due to this differentiation you HTTP adatper is not visitble in RWB. But you can monitor it from ABAP stack.
Edited by: Rajhans Abhay on Jan 18, 2012 6:06 AM

JCBC Adapter and File adapter not processing messages

Hi
I noticed that messages are being delivered to Adapter engine and the same are visible in Runtime Workbench with status "to be delivered". But, JDBC Adapter and File Adapter not processing these messages.
Any idea where I can find the problem?
I was able to re-deliver successfully via the JDBC Adapter using the MessagingSystem GUI using XISUPER user.
Regards
Chandu

Hi,
1.Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Regards
Agasthuri Doss

MDM PI Adapter not visible

Similar Messages

Maybe you are looking for