MDM scenario

Hello Folks
Wanted to understand how would we do a scenario like picking data from MDM and posting it to a portal?
Please advice.
Thanks

Please visit these blogs also
MDM Syndicator (Helpful)
/people/harrison.holland5/blog/2006/11/27/mdm-syndication
XI Configuration for MDM Integration
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
Testing and Monitoring an Interface between MDM and XI.
/people/harrison.holland5/blog/2007/01/22/testing-and-monitoring-an-interface-between-mdm-xi

Similar Messages

  • MDM Scenarios involving XI

    Can any one list the MDM Scenarios involving XI?
    -Naveen.

    Hi,
    There are already some good links are given by Bhavesh and Satish.
    To my knowledge where ever you need to do some Harmonization, Data Deduplication, catlog management you will go for MDM. MDM generally reads reads XML files(may be CSV & some formats but definetly not RFC or IDOCS) and gives out XML files. Lets take up some ORGN for example say DHL. DHL is spread across the globe and obviously they would be using diverse systems. But DHL would like to maintain a centeralised HR data say all Employee details. That is a single a single point where I am maintaining my master data, as we say master data we know there should be duplicates and it should be harmonized. SAP's solution for that is MDM which would help in Harmonize and remove duplicates. But the question is how MDM would collect data from all these diverse systems spread acroos the globe and at the same time how do MDM post those data into some centeralized HR system say SAP HR. So XI comes into picture to collect all different format of data and they might also use XI to convert those data into a uniform XML structure and it is loaded into MDM. MDM does its job and obviously it cannot post a IDOC into SAP HR. So it gives out a file and XI again picks up and post the IDOC into SAP HR. Simillarly think of all the master data like Product/Material master etc...
    So in most of the cases MDM & XI joins together to give a solution.
    Regards,
    Prakash

  • How can we testing the MDM Scenario

    Hi
    As per in XI we use to test the scenario by using SXI_MONI and other onesu2026Like this is there any process to test the MDM scenario ..
    Thanku
    yuga

    Hi Yugandhar,
    As far as I know,MDM has  no such Monitoring Facility within the tool.
    There are differnet parameters on basis of which you can monitor or test the performance by considering these factors while building the rep
    - Parameters to be decided while creating the data model by proper selection of  the field properties.
    - Correct Sizing
    - Taking backups
    - Correct setting sin the server ini
    - Configuration settings in the MDM client
    - Proper setting for automation of importing and syndication
    If you have XI in your landscape then you can use it for minitoring purposes.
    Within MDM you can only Verfify and check your repository from time to time and take backups lin the form of archieve and duplicate repository for maintainence purpose.
    You can also use the MDM workflow to control and monitor the flow of Data records and it enrichment.
    You can also use Clix to monitor the MDM repository connection and protection using the command line interface
    But there is no specified and dedicated testing feature in MDM.
    Hope It Helped,
    Thanks & Regards
    Simona Pinto

  • MDM scenario query

    Hi All,
            I wanted to understand how a MDM repository designed for the following scenario:
    I have  4  remote systems, A,B,C and D.
    For example ,lets take a customer Master data.
    I have 30 fields for the custmer,out of  which the field "payment term " is different for each remote system.For eg,payment term 15  in system A,means as follows:
    Remote System                     Value
    A                                              15
    B                                               B1
    C                                               C1
    D                                               D1
    And there are lots of payment terms which are dynamic.
    We can do it by having a lookup table called PaymentTerms with  a  field "PaymentTerm" for the payment term and managing four keys on each record(say for above example,an record entry for 15 with four keys as:
    A  15
    B   B1
    C  C1
    D  D1
    So when I mark the  field as a display field, it will appear as 15 for all records .which have payment term as either 15,B1,C1 or D1 as data cn be fed from any of the four system.
    That will be confusing for the MDM data administrator as for a record coming from system B,should be B1 and not 15.
    Please let me know if my scenario is unclear.
    Edited by: Premjit Mishra on Feb 9, 2011 11:45 AM

    Hello Premjit Mishra
    For me it's clear
    Create next LUT"Payment term":
    System - related (LUT) - name of system( should be related lut with list of our system names)  - Display field (1) - order in DM
    Term  -  (text or real or measure) - name of payment term or, maybe, value -   Display field (2)
    XXX- - dome another dfields if you want
    Create in your main table filed like "Payment term"
    type = LUT (Flat)
    lut name =Payment term
    Value selection= Mini-search
    Regards
    Kanstantsin Chernichenka

  • Data is not imported in to MDM in PI---- MDM scenario

    Hi All,
    Here my scenario is loading data in to MDM from PI using MDM adapter.
    When i tried for the first message it is successfully loaded in Data Manager through the Import manager but when i try for second message its not loaded in to Data Manger and from PI side it is showing that data is successfully sent to MDM through MDM adapter.I dont know what could be the wrong as i am new to MDM can anyone suggest me where should i check.
    I also checked in the Port at MDM Console its showing the status as HasData.but when i check at import manager and Data Manager the second message is not there its only showing the first message or first record.
    kindly suggest me.
    Thanks,
    Kalyan

    Hi Priti,
    Thanks for valuable suggestion....Yes i did the same but problem which i found was lot of messages with same data were there in port->inbound-->ready folder  and i removed the same messages and processed with new messages.
    But one more doubt here...can't it directly store in data manger i mean without manual interaction lets say in the import manager we have to execute import option.....is it somethng like everytime when data comes to MDM from PI...is there  any workflow which can automatical stores the data in data manager without executing import option.
    BTW could you also provide me documents on creating customized workflows in MDM....??
    Here is your hit...
    Thanks,
    Kalyan

  • IDOC to MDM scenario error

    my scenario is IDOC to MDM.For that i m using MDM adapter. I m getting erroer in Communication channel monitoring :
    "Configuration Error: cannot create repository session:Caused by: The specific MDM repository was not found on the server."
    Kindly send me the solution.

    Hi
    1. Check the communication channel configuration on PI and compare the given access parameters with the MDM settings
    2. Check the MDM system landscape and start the MDM Server
    3. Check the MDM server using the MDM Console. Load the repository
    Regards
    Monika

  • SRM to MDM scenario

    Hello Guru's,
    I need to verify somethings because I am getting a bit lost.
    I need to have a scenario from SRM to MDM with XI. Only there is a problem because the MDM server is Linux. Linux only supports secure FTP and XI only supports FTP(s). So the solution was to implement a J2SE adapter plain engine, because its very basic to install. This is done and now comes the point where I am getting lost:
    For the part for XI to MDM I have created a receiver XI adapter in XI:
    - tranport protocol HTTP 1.0
    - message protocol 3.0
    - Adapter engine: Integration Server
    - Addressing Type: URL Address
    -Target host: http://aaa.bbb.bbb
    - Service number 62001
    - Path prefix: /file/Receive
    - Authentication type: Use logon data for Non-SAP system, with username and password
    On the MDM server for the J2SE adapter plain engine, I have configured a file_receive adapter:
    File adapter java class
    classname=com.sap.aii.messaging.adapter.ModuleXMB2File
    version=30
    mode=XMB2FILE
    ##Adress for XMB endpoint
    XI.httpPort=62001
    XI.httpService=/file/Receiver
    ##File Adapter specific parameters
    file.createDir=1
    file.targetDir=/usr/sap/CA1/trans/data/
    file.targetFilename=xmb_output.xml
    #file.writeMode=append
    #file.writeMode=overwrite
    file.writeMode=addCounter
    file.counterMode=immediately
    #file.counterMode=afterFirst
    file.counterSeparator=_
    file.counterFormat=00000
    file.counterStep=1
    The question is, do I need to have a SOAP receiver adapter in XI and a FTP receiver on the J2SE side, like a described above?
    Best regards,
    Guido Koopmann
    Edited by: G. Koopmann on Jun 24, 2008 3:11 PM

    Hi,
    One way I would look at solving this problem would be -
    If there is a common file server in the landscape which both XI and MDM system could reach. If that is the case, I would not write an J2SE adapter but would simply place the files from XI using a file adapter or FTP adapter. From there MDM can poll them (if possible).
    I am not sure if it helps. But just a thought.
    VJ

  • Query on BPM & MDM scenarios

    Hi All,
    My Requirement ,
    The scenario is BPM-Portal(SOAP)- - - ECC(RFC)- - - MDM(7.1)
    The webservice(Asyn) is being triggered from the BPM-Portal ,it has to send the values to both systems parallely ,
    a)ECC system by using a RFC(syn)
    b)MDM server
    and the response(status) of the RFC message should be passed to the MDM server .
    My queries are,
    1)Could anyone suggest me on how to proceed the above stated scenario.
    2)If I configure the MDM server using 7.1(PI-MDM Adapter), will my xml file would directly updates the MDM tables .
    3)I hope MDM 7.1  works only for Asynchronous flow,is that correct?
    Thanks in Advance.
    Regards,
    Lavanya

    Hi All,
    There is a change in my requirement ,
    The scenario is BPM-Portal(SOAP)- - - ECC(RFC)- - - MDM(7.1)
    The webservice(syn) is being triggered from the BPM-Portal ,it has to send the values to both systems parallely ,
    a)ECC system by using a RFC(syn)
    b)MDM server
    and the response(status) of the RFC message should be passed to the MDM server and to the BPM-Portal .
    My Queries:
    1.Is that I need to achieve this through BPM or without BPM.
    2.I need to provide the wsdl to BPM-Portal team,should I need to generate as an  Asyn or  syn mode.
    Could anyone suggest me on how to proceed the above stated scenario.
    Thanks in Advance.
    Regards,
    Lavanya
    Edited by: Lavanya Balanandham on Apr 14, 2011 12:15 AM

  • MDMGX Transaction in R3-XI-MDM Scenario

    Hi,
    I am working with R3 XI MDM integration.For Look Up table values I need to use MDMGX Transaction which will generate a XML document.I am facing difficulty in configuring the ports and check tables
    There are essentially 5 steps
    1.Define Object Types
    2.Define Repositories and FTP servers
    3.Upload Ports and Check Tables
    4.Maintain Ports and Check Tables
    5 .Define Function Modules for exception handling
    Can anyone please give me any document which talks in detail abt each of the steps.
    Regards
    Prabuddha

    Hi,
    Write MDMGX in R3 browser, following options will be displayed.
    Define Object Types: There are some standard object defined in MDMGX, you can use from them as per your requirement.
    Define Repositories and FTP Server: For which you want to extract data like a logical name, FTP server details etc.
    Maintain Ports and Check tables: port numbers and for which table tha data has to be extracted.
    Generate XSD: to generate the XSD file to use in console while creating port.
    Start Extraction: to extract the data from the R3 or other system to MDM System via FTP Server.
    for more info:
    you can refer SRM-MDM Business scenario guide which is avialable on the service market place,each and every step is mentioned in that.
    I hope this will help you.
    TNR,
    Saurabh...
    Edited by: Saurabh Kumar Sahu on Feb 19, 2008 8:30 AM

  • A MDM Scenario Regarding accessing and displaying data

    Hi All,
    If there is a scenario such that there is a Manufacturer field from Main table[ Products ], has some vaues say A, B, C, etc. A suppose belongs to India, B to USA, C to UK, etc respectively. Then how can we do this that if a user is assigned to Manufacturer A, then that user should be able to see all the values even from B and C manufacturers also, But User should be able to modify the data which belongs to manufacturer A only.
    Can Anybody please help me in this regard As to how can I achieve it in MDM.
    Edited by: Gaurav Kumar Sharma on Mar 10, 2010 11:41 AM

    Hi All,
    Is it possible??
    Create a role  that have only read access to all records and create each another roleN that have read write access to corresponding manufacture like for each manufacture there is a read write role for corresponding records(we can achieve by namedsearch).
    Finally assing user for manufacture A to both  role A and  read role
    user for manufacture B to both  roleb and read role
    (i think it take the union of both roles).
    I will try on my system tomorrow and update u on same sp for a mean time if u get cahnce please try it if it looks good,
    Please suggest something better if possible.
    Thanks,
    Sudhanshu

  • SRM to MDM Scenario -- Unable to Edit the Integration Scenario

    Hi Experts,
    I'm doing a scenario in XI/PI from SRM to MDM.
    I had downloaded all the related content from service market place and also established SLD connections as well.
    When I'm trying to import the Integration Scenario from Integration Repository to Integration Directory I'm getting the follwing error.
    Software component version with GUID 77891250-7da4-11d8-b240-e6890a114c15
    does not exist (SWC_NOT_EXIST)
    I'm unable to edit the integration scenario in IR even with PISUPER credentials which have all the access.
    I'm also unable to edit any of the other objects as well (e.g.,Message Interface,Interface Mapping etc.,)
    PFB the link where I pasted the error snapshot I'm getting when I'm trying to open the Integration Scenario in IR.
    [http://picasaweb.google.co.in/prajwal24/MyScenario#5492932473682114498]
    Can anyone please help me out on what can be done to edit the Integartion Scenario.
    Thanks and Regards,
    Pruthvi

    Thanks kaushik and Salvi for your valuable inputs.
    I have created a copy and now able to edit the Integration Scenario.
    But again a new problem came up.
    Now after editing the predefined scenario which has only SRM 5.0 and SRM 7.0
    I need to add SRM 7.0 application component here in this Integration scenario and this was done successfully.
    Now i need to add one send action and this send action is present in the SWC SRM SERVER IC 7.0.
    I had downloaded the SRM SERVER IC 7.0 content already and I'm able to see in Integration Repository also.
    But this SWC is not present in the application component SAP SRM (WITH SAP EBP) 7.0.
    Please let me know what to do now inorder to add this send action in that application component.
    Regards,
    Pruthvi

  • Message is not going to XI in SRM- MDM scenario

    hello,
    We are doing SRM_MDM scenario.
    We have installed SRM-MDM Catalog 2.0 Business Contents on XI.
    But i couldn't see any Outbound Interface in these standard contents.
    I want xsd for CatalogPublicationRequest_Out.............. where will i get that (transaction) ???
    Also when i execute the Report ROS_SUPPLIER_SEND_TO_CATALOG in SRM, I could see my message( CatalogPublicationRequest_Out ) in SXMB_MONI of SRM.
    But its not going to XI...............I can't see it in SXMB_MONI of XI.
    That message in MONI of SRM have Sender but Receiver field is blank.
    May be because of this is it not going to XI.
    Please tell me the steps that i need to follow.
    Help will be highly appreciated.............. its urgent
    Thanks in advance
    Maheshwari.

    Hi Hi Maheshwari,
    Sap has shipped the preconfigured proxies for the transaction.
    ROS_SUPPLIER_SEND_TO_CATALOG.
    you can get the complete business Pack and related docs for SRM_MDM Catalog on the Service market place.
    you need to Import of PI Business Content for SRM-MDM Catalog in Integration Repository
    For that Place PI content file (XI_7_0_SRM_MDM_CATALOG_1.0_00_00.tpz) in directory “/usr/SAP/xid/sys/global/xi/repository_server/import”. This Content file can be found in Business content Import of PI Business Content for SRM-MDM Catalog in Integration Repository.
    But first before importing above file.
    You have to configure SLD Connections in which:
    1.Defining Technical System for SRM Server, MDM and SAP PI.
    2.Creating Business systems for SRM, PI and MDM
    u also need to do Configuring Setup for ABAP Proxies:
    1. use Transaction SM59 for creating RFC destination for HTTP( TYPE H) where u Specify Host Name of the PI server, Service Number and Path Prefix  in Technical Settings tab.
    2. u also need to configure SRM System as Local Integration Engine. For this enter transaction SXMB_ADM .
    HOPE IT WORKS,
    Thanks,
    Mandeep Saini

  • Path for putting the file while doing "Proxy to MDM " Scenario

    Hi ,
    Please let me the path from which the MDM Server Picks the Files
    Thanks
    Srini

    Hi,
    I am not sure, because i have not done such type of task..
    as explained above blog you can use MDM server folder path
    Please see the below link
    /people/savitri.sharma/blog/2006/08/03/increased-functionality-and-ease-of-use-the-ins-outs-of-mdm146s-new-transport-utility
    /people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
    /people/udi.katz/blog/2005/08/21/retrieving-data-from-mdm-server-using-the-mdm-java-api
    /people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
    /people/andreas.seifried/blog/2006/04/11/mdm-java-admin-api-remote-control-for-mdm
    /people/andreas.seifried/blog/2007/01/18/referencing-the-mdm-java-api-during-development-and-runtime
    /people/harrison.holland5/blog/2007/01/22/testing-and-monitoring-an-interface-between-mdm-xi
    /people/walter.kahn/blog/2005/10/27/mdm-55-api-tips-and-tricks--measurement-fields
    /people/udi.katz/blog/2005/07/17/mdm-connectivity-to-java-application
    /people/anand.chandrashekar/blog/2006/04/10/using-sap-mdm-import-manager-batch
    /people/bv.pillai/blog/2006/09/28/calling-mdm-java-api-application-executable-from-abap
    /people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e4ad7997-0d01-0010-2ca0-af45475252b5
    Data from CRM to MDM
    Connecting MDM to CRM
    File to RFC(MDM to BW)
    Regard
    Chilla..

  • Discovery Box and MDM Scenarios

    Hi,
    What scenario's are available on the discovery box ? Especially interested in the MDM stuff : What repositories are loaded, any scenario's like mdm harmonization implemented... )
    Thx,
    Dirk

    Hi Dirk,
    The Discovery System uses SAP MDM to store the suppliers and products master data of the “CoolCorp” company. The supplier and product master data are used by the purchase order business scenario that is part of the box.
    We have an exercise, in which we assume that the “CoolCorp” company acquired another company named “SmartComp”. As a consequence a new list of suppliers and products needs to be consolidated into MDM.
    For purchase order business scenario (http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3aecc59c-0d01-0010-d0ad-b7133a8e49d8)
    supplier and product data has been extracted from the backends, mapped and uploaded to MDM.
    Of course you have all freedom to realized additional scenarios in MDM on your own.
    Hope that helps,
       rAimund

  • How to lock R/3 master data transatcions when using Central MDM Scenario?

    Hello Colleagues.
    We are implementing a Central master data management scenario, all master data will be created / changed within MDM; so we need to block create/change for fields that are considered in MDM for the master records within R/3.
    In a previous project we used authorization profiles to achieve this task. I supose an other option is to use the field status configuration.
    However, I was wondering if SAP has something standard to achieve this blocking within R/3?
    Thank you for your answers.
    Regards,
    Jorge.

    Hi Jorge,
    SAP MDM has released Central Master Data management as standard already.  Also SAP MDM SP04 has more features which will have easy integratoin for standard R/3 Repositories for CRM, SRM etc.  You have a facility in MDM Repository for creating your customized Roles which will help you to block certain access to users.
    Hope this answers your requirement.
    Regards
    Veera
    Note : Please mark the Points if this reply is helpful to you

Maybe you are looking for