MDM Server Logs errors

hi
we are constantly seeing this error message in our MDM Server Logs
Stopping database PRD_APPLE_100 on MXD because DBMS server contact has been lost and could not be re-established after 10 attempts
would you know what does this mean, and what should be done
Thank you
Jonu Joy

Hi,
There is a paramter named DBMS Reconnection Attempts in MDS.ini which decides the number of attempts to connect to database server. Default value is 10. If the parameter does not exists then you can type the same and assign some value to it. Please refer the MDS.ini parameters for more information.
Regards,
Jitesh Talreja

Similar Messages

Error Message in MDM Server Log

Hi Experts,
Can anybody tell me what could be the problems if we have the following scenario ?
For an example: Our MDM Server is based on 5.5 SP06, MDM Server name is DFM and our repository name is MDMQ110.
1) Checking the Reports from this Repository MDMQ110 from MDM Console, no errors and no warning. This repository can be loaded successfully and completed.
2) Server Log has an error in message:
Error: Service 'DFM', Schema 'MDMQ110_m000', ERROR CODE = 0,
SELECT LENGTH(Data) FROM A2i_Misc_Blobs WHERE Id=1000
Thanks very much for your help in advance
Regards,
WD

Hi Kanstantsin,
Thanks for your reply. I have done the stop and repair but It did not help any. By repair, there are no errors and warnings that have been fixed which I can see in the repository reports.
The Assertion Log has come up first with the messages like:
6426            2010/01/12 09:07:08.500               Error: Data_2 accelerator does not exist in A2i_CM_Accelerator_Status
6426            2010/01/12 09:07:08.683               Error: Data_53 accelerator does not exist in A2i_CM_Accelerator_Status
4884 2010/01/12 09:43:30.335   Error: KeyWord_2_F4_Leng_USA accelerator does not exist in A2i_CM_Accelerator_Status
As soon as I run into MDM, the Server Log has come up the same messages:
It looks like not only happened to this repository. As I can see if I load any other repository, there are the same messages in Server Log but only the repository name in the message is different.

MDM Server outage - error diagonised

Hi Forum,
We are observing intermittent outages of MDM Server. Upon investigation of server logs we have found the message - 'INTERNAL ERROR in: CatMgrTable::GetSortIndex(4294967295,0) fieldPos >= # fields. m_fields.size=2</Error>' .
This hints something about Sort index - but not clear about the meaning of entire message.
Please help me in understnding this.
Regards,
Vinay M.S

Hi Vinay,
I guess you have lots of fields in your repository with Sort Index = Normal and this number is exceeding the limit of the databse field which stores the number of sortable fields.
It is always recommended not to have Sort Index = Normal for all the fields. Try removing this property for some of the fields and check the MDM Server outgage.
Regards,
Jitesh Talreja

Server log error

I selected the View Server Log option in the console and hit a 500 message limit. At the same time the
following error was logged.
####<27-Oct-00 11:38:40 BST> <Warning> <Log Management> <> <myserver> <main> <system> <> <170007>
<Error while parsing log message - Fri Oct 6 22:56:33 PDT 2000.>
java.util.NoSuchElementException
at java.util.StringTokenizer.nextToken(StringTokenizer.java:235)
at weblogic.management.logging.LogfileSearchServlet.parseMessage(LogfileSearchServlet.java:430)
at weblogic.management.logging.LogfileSearchServlet.doSearch(LogfileSearchServlet.java:193)
at weblogic.management.logging.LogSearchCriteria.doSearch(LogSearchCriteria.java:446)
at weblogic.management.console.pages._logviewer._index._jspService(_index.java:269)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:209)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1114)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1388)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:133)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:116)
Is this a known problem?
Sandy Edmiston

Hi Sandy,
This is due to a bad message in the logfile which gets created during the
install. The error below is just saying that it is ignoring the bad message.
Yes, it is a known problem.
Also, the reporting error message has also been enhanced (for the beta
refresh release) to give more information about what happened.
Thanks for your feedback.
Sanjeev Chopra.
Sandy Edmiston <[email protected]> wrote in message
news:39f95d81$[email protected]..
>
I selected the View Server Log option in the console and hit a 500 messagelimit. At the same time the
following error was logged.
####<27-Oct-00 11:38:40 BST> <Warning> <Log Management> <> <myserver><main> <system> <> <170007>
<Error while parsing log message - Fri Oct 6 22:56:33 PDT 2000.>
java.util.NoSuchElementException
at java.util.StringTokenizer.nextToken(StringTokenizer.java:235)
atweblogic.management.logging.LogfileSearchServlet.parseMessage(LogfileSearchS
ervlet.java:430)
atweblogic.management.logging.LogfileSearchServlet.doSearch(LogfileSearchServl
et.java:193)
atweblogic.management.logging.LogSearchCriteria.doSearch(LogSearchCriteria.jav
a:446)
atweblogic.management.console.pages._logviewer._index._jspService(_index.java:
269)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:209)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:1114)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:1388)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:133)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:116)
Is this a known problem?
Sandy Edmiston

Error mounting MDM Server

Hi,
Error mounting MDM Server
We are unable to mount the MDM server, the error message saying
(The specified SAP instance does not exist on server mdm-sr)
mdm-sr : hostname of mdm server
FYI: The mdm server and mdm console running on the same host .
Thanks
Faris

Hi Deep,
restarted both DB and then MDM server, but still not working, giving same error message
(Error mounting MDM Server, The specified SAP instance does not exist on server mdm-srv)
FYI: The mdm server and mdm console running on the same host .
But the DB instance is runing on the diffrent server
Tx,
FSS

Renaming of files by MDM Server (MDM 5.5 SP4)

Hi Experts,
I am checking the MDM Server Logs and found that there is always renaming of files happening from ".tmp" to ".xml" as shown below:
7560 2011/09/13 15:39:16.773 GMT SyndicateToPortImpl: rename files (0) "C:\PROGRA1\SAPMDM1.5\Server\Distributions\MR4_ORCL\BP US FUELS CUSTOMER MASTER_PRD\Outbound\SCDB_BP\Modify_BP_SCDB\Ready\Data_110913-153916_000.tmp"
to
"C:\PROGRA1\SAPMDM1.5\Server\Distributions\MR4_ORCL\BP US FUELS CUSTOMER MASTER_PRD\Outbound\SCDB_BP\Modify_BP_SCDB\Ready\Data_110913-153916_000.xml".
Can someone tell me why this renaming of files is happening?
Thanks!

Hi,
This should be happening to avoid incomplete files getting picked up by tools from the Ready folder.
So until the file is completely transferred into Ready folder, it gets created as .tmp and then it gets converted to .xml once the file is completely copied.
Same thing you can see when you archive a repository. The .a2a extension is different if the Archive operation aborts.
As per SAP MDM 7.1 Console reference guide , this is recommended to avoid issues with incomplete files. But in your case of MDM 5.5, if you say that you have not implemented this logic manually and it is happening automatically then it is good for you.
SAP MDM Console Reference Guide - Page 272. http://help.sap.com/saphelp_mdm71/helpdata/en/4b/71608566ae3260e10000000a42189b/MDMConsole71.pdf
Thanks,
Shambhu.

Error in starting MDM Server from MDM Console

Hi,
I have installed SAP MDM 5.5 SP05 on Windows 2003 Server.
When i try to start the MDM Server (i.e. MDM Service) from the MDM console it gives me the following error:
<i>Error Starting apmdmd(MDM Server): The machine 'apmdmd' is not Windows-based. The MDM server cannot be started from this application; please use CLIX on the machine instead. </i>
But if i start the MDM Service manually and then mount the server, it works fine.
Kindly help.
Regards,
Chintan Sheth

It sounds to me like a problem potentially with either the permissions of the Windows user or perhaps a software firewall. The Console uses a low-level Windows API function to determine if the target machine on which MDS is installed is Windows-based. This function may be blocked by some OS or firewall-level setting. This may be the case even if you are able to use the same client machine to connect to the target machine via the Service Control Manager and start MDS from there.
I would like to help with this problem, but I need to know a few more things:
When the problem occurs, is the Console running on the same Windows machine as MDS?
You mentioned Windows 2003 Server... when you run the Console on this machine, are you logged in as an Administrator of the machine? And do you still get the error when you attempt to start MDS from within the Console?
Once MDS is started, and you mount it within the Console, are you having any other problems, such as logging in to a repository, or viewing logs?
Is there a firewall installed on the machine or machines that the software is installed on? We may have to review the settings of the firewall, or try temporarily disabling it (on both ends, or at least on the machine running MDS), to see if the problem goes away -- then we'll know the problem is with the firewall settings.
CLIX is a fine workaround if you can use it, but clearly this problem needs to be rectified.
-cleo

Error while connecting to MDM server from Webdynpro

Hi ,
   I am trying to connect to MDM server (5.5 SP04 no patches) through a webdynpro application . The following is the piece of code that I am using as a test .
CatalogData CatalogData = new CatalogData();
    int resultLogin = 0;
    try {
          resultLogin = CatalogData.Login("USNOC01AQ05",2005,"Admin","Erico1234","English [US]");
    }catch(Exception e){
          wdContext.currentContextElement().setValueattr("Not Connected");
         //System.out.println("Error while establishing connection");
    if (resultLogin != RC.RC_OK){
          wdContext.currentContextElement().setValueattr("Not Connected");
         //System.out.println("Error logging to the SDM server");
         //System.exit(-1);
     wdContext.currentContextElement().setValueattr("Connected");
    //System.out.println("MDM server connected");
The import statements are as follows
import a2i.common.CatalogData;
import a2i.generated.RC;
I have put the following jar files in the java build path
MDM4J
mdm-admin
mdm-common
mdm-core
mdm-data
mdm-protocol
When I deploy my application I get the following error
java.lang.NoClassDefFoundError: a2i/common/CatalogData
It can't be determined from the exception chain, which class loader failed to load the above class. But at least the class loader of the current application does not contain a resource with name 'a2i/common/CatalogData'.
What do you guys think is the problem ?
Regards
DeepaK Singh

Hi ,
   I found a document which says that MDM4J is the legacy API and is considered deprecated .The MDM Java API is the new one .I have both of them in the java build path . I am not sure if this is that cause of the problem .
Now I had a look at the javadoc for the new API but I am not able to locate the class to obtain a connection to the MDM server from a custom application being built in Netweaver Developer Studio . Can someone help me out with the same ?What would be the code to obtain the connection to the MDM server with the new JAVA API ?
Regards
DeepaK Singh

Database error - MDM server installation

Hi,
I installed SQL Server and then MDM server. Now SQL server is up, server sign on console is green, when I try to unarchive repository archive, I got database error: error to initialize database. (I uses "sa" to connect )
What is needed to configure MDM to talk with SQL Server?
Thanks a lot in advance!
David

Hi Subbu,
When i tried to set DBMS settings or unarchive repository, it prompt me <server name>[Sql Server] Initialization. Two entries are needed there:
Data file path:
Transactional log file path:
I set them as following:
C:\Program Files\Microsoft SQL Server\MSSQL\Data
C:\Program Files\Microsoft SQL Server\MSSQL\Data
then get error:
"Unable to set current database with database server";
"The MDM repository list schema has not been created"
I also tried to input as "C:\Program Files\Microsoft SQL Server\MSSQL\Data\mdmsp3_Data.mdf" and C:\Program Files\Microsoft SQL Server\MSSQL\Data\mdmsp3_log.ldf"
still get the same error.
Please put some light on this!
Thanks!
David

Why my MDM Server can only communicate with ipads and iphones with logging Junos sslvpn.

Why my MDM Server can only communicate with ipads and iphones when either of the iPhone or iPad Junos sslvpn? Any ideas
Our iPad and iPhones users have to log in to Junos SSLVPN to be able to communicate with our MDM Server (via wi-fi). Any ideas where users don't have to log in to Junos SSLVPN?

This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies.

Error while accessing SharePoint 2013 news feed REST api - "The server encountered an error processing the request. See server logs for more details."

Hi Experts,
I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an
error processing the request. See server logs for more details."
This is happening after posting the image to news feed without entering any text or description with that. If i post an image with some text or description, then i can able to get the feeds. Or else if i delete the image post then also i can able to get
the feeds.
I can able to see below logs in log files.
Exception occured in scope Microsoft.Office.Server.Social.SPSocialRestFeed._SerializeToOData. Exception=System.MissingMethodException: No parameterless constructor defined for this object. at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache,
StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type) at Microsoft.SharePoint.C...
...lient.ValueTypeConverter.<GetODataProperties>d__2.MoveNext() at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection,
Action beforePropertiesAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)
at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction,
DuplicatePropertyNamesChecker duplicatePropertyNa...
...mesChecker, CollectionWithoutExpectedTypeValidator collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertie...
...sAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue
complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, CollectionWithoutExpectedTypeValidator
collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSeriali...
...zer.WriteCollectionValue(ODataCollectionValue collectionValue, IEdmTypeReference propertyTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertiesAction,
Action afterPropertiesAct...
Can anyone please help me out.
Thanks!
dinesh

O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Crystal Report 2008 results "Password did not match error" in SQL Server Log

Hi,
I am trying to develop some crystal reports using Crystal Report 2008 SP4 to connect to SQL server 2008 through RDO (ODBC). My problem is that anytime Crystal Report is trying to establish a connection with SQL Server, first it tries to connect with the wrong password and results the following error message in SQL Server log:
Login failed for user 'peyman'. Reason: Password did not match that for the login provided. [CLIENT: 192.168.2.198]
The login name 'peyman' is the right one as I have quoted the same in setting up ODBC System DSN using "SQL Server Native Client 10". But somehow Crystal Report is taking its chance and trying to connect before prompting me for the password. After this error logged to SQL server side, I can see Crystal Report pops up the prompt to enter DSN password. After supplying password to this prompt, Crystal Report works fine and pulls the data and renders the report without having any more incorrect password error logged to SQL Server.
The attached file shows the step I am taking to regenerate the issue. I need this to be fixed as anytime uses any of these reports and tries to render it with crystal runtime engine the same error message raises in SQL Server side and logged in the log file.
Thanks,

Hi Peyman,
This is the way it should work, In CR designer when you open the report it does nothing. As soon as you hit the Refresh button then CR tries to use the connection saved with the report. It assumes what is saved with the report is a valid server and connection info. CR simply tries to verify the server is still active.
If you don't want it to fail in CRD then before opening any report Click the File, Log on Database option and connect. Now when refreshing reports it won't log the failed.
In the SDK it does the same thing, it assumes the Server info is the same and does try to connect to verify the Server does exist. It only takes a few milli-seconds to do this
To stop this from happening set the log on info first then it won't log the attempt to connect, it's checking to see if Trusted is allowed.
TIMESTAMP    THREAD_ID    FILENAME    LINE_NUMBER    LOGGED_DATA    LEVEL
2014-6-2 8:30:11.439    57320    .\QESession.cpp    444    Set Product View Locale: 4105    20
2014-6-2 8:30:11.439    57320    .\QESession.cpp    478    Set Preferred View Locale: 4105    20
2014-6-2 8:30:11.439    57320    .\QESession.cpp    500    Set Process Locale: 4105    20
2014-6-2 8:30:11.440    57320    .\qecommon.cpp    117    This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217    1
2014-6-2 8:30:11.967    57208    .\QESession.cpp    444    Set Product View Locale: 4105    20
2014-6-2 8:30:11.967    57208    .\QESession.cpp    478    Set Preferred View Locale: 4105    20
2014-6-2 8:30:11.967    57208    .\QESession.cpp    500    Set Process Locale: 4105    20
2014-6-2 8:30:11.968    57208    .\qecommon.cpp    117    This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217    1
2014-6-2 8:30:11.999    57208    .\QESession.cpp    444    Set Product View Locale: 1033    20
2014-6-2 8:30:12.4    57320    .\qecommon.cpp    117    This value is write-only. File Name: ".\QEProperty.cpp". Line: 145    1
2014-6-2 8:30:56.278    57208    .\odbcapi.cpp    301    Beginning COdbcapi::DriverConnect    20
2014-6-2 8:30:56.342    57208    .\odbcapi.cpp    335    Ending COdbcapi::DriverConnect    20
2014-6-2 8:30:56.342    57208    .\connect.cpp    2170    SQLDriverConnect succeeded: DSN = 192.168.13.172, User ID = sa, Password = ********    10
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 916    1
2014-6-2 8:30:56.348    57208    .\QERowset.cpp    1184    Beginning CQERowset::readFirstRecord    20
2014-6-2 8:30:56.348    57208    .\QERowset.cpp    2149    Beginning CQERowset::restart    20
2014-6-2 8:30:56.348    57208    .\QERowset.cpp    2370    Beginning CQERowset::execute    20
2014-6-2 8:30:56.353    57208    .\DbQueryBuilder.cpp    514    Query Targets: sqlncli10, ODBC3SQLServer    10
2014-6-2 8:30:56.353    57208    .\DbQueryBuilder.cpp    525    Successfully built query:    SELECT "Orders"."Customer ID", "Orders"."Employee ID"   FROM   "xtreme"."dbo"."Orders" "Orders"    10
2014-6-2 8:30:56.353    57208    .\odbcapi.cpp    875    Beginning COdbcapi::ExecDirect    20
2014-6-2 8:30:56.354    57208    .\odbcapi.cpp    884    Finishing COdbcapi::ExecDirect    20
2014-6-2 8:30:56.354    57208    .\rowset.cpp    220    SQLExecDirect succeeded: SELECT "Orders"."Customer ID", "Orders"."Employee ID" FROM   "xtreme"."dbo"."Orders" "Orders"    10
2014-6-2 8:30:56.354    57208    .\QERowset.cpp    2814    bindToField succeeded: Orders.Customer ID is using client buffer    10
2014-6-2 8:30:56.354    57208    .\QERowset.cpp    2814    bindToField succeeded: Orders.Employee ID is using client buffer    10
Notice it doesn't try to connect first if I set the log on info first using code.
So nothing we can do to stop SQL server from logging this info. Check with the DBA, possibly they can "filter" out the application attempts to connect or change your work flow in the app.
If you have a Preview Button to view the report then simply add your Database log on info prompt there if Connectioninfo.Trusted is not true:
mainSecureDB = rpt.Database.Tables[tableIndex].LogOnInfo.ConnectionInfo.IntegratedSecurity;
if mainSecureDB = false then prompt the user for log on info and set accordingly, if it is true the it should not fail when it connects.
This is simply a matter of changing your App work flow...
Thanks
Don

Power Bi for o365 - Odata connection test worked but "The server encountered an error processing the request. See server logs for more details". Port 8051? Authority\System

We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]

O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error in server.log , while starting soa managed server - B2B not running

Hi All
After starting SOA managed server , we found following error in the server.log , we are successfully able to access em and admin console , but while trying to access B2B console getting no response.
Please help us in understaning this error.
[ServletContext@15501276[app:b2bui module:/b2bconsole path:/b2bconsole spec-version:2.5], request: weblogic.servlet.internal.ServletRequestImpl@4e8b8[ GET /b2bconsole/faces/login.jspx HTTP/1.1 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://172.16.130.34:7001/console/console.portal?_pageLabel=WebAppModuleTestingPage&_nfpb=true&WebAppModuleTestingPortletexpandNode=ROOTCHILDNODE1 Cookie: JSESSIONID=8R1ZM24XMQDs1Z22QNJ4YM1cMrGlKbd77nCTLkTW62Bkvw2nG6vx!-1614137459; ADMINCONSOLESESSION=LKZJM23fPzQQsM2GyHDHWtJ2L8nNNzmB3gNQG1n1phMwv41mJMVN!-145877631 ]] Root cause of ServletException. java.lang.NoClassDefFoundError: Could not initialize class org.apache.myfaces.trinidadinternal.convert.ColorConverter at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at com.sun.faces.application.ApplicationImpl.newConverter(ApplicationImpl.java:1114) at com.sun.faces.application.ApplicationImpl.createConverter(ApplicationImpl.java:770) at oracle.adfinternal.view.faces.util.rich.ConverterValidatorRegistrationUtils.addConverterByTargetClass(ConverterValidatorRegistrationUtils.java:164) at oracle.adfinternal.view.faces.util.rich.ConverterValidatorRegistrationUtils.register(ConverterValidatorRegistrationUtils.java:84) at oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator.init(RegistrationConfigurator.java:77) at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.init(GlobalConfiguratorImpl.java:400) at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:206) at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.getExternalContext(GlobalConfiguratorImpl.java:329) at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$CacheRenderKit.<init>(FacesContextFactoryImpl.java:86) at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl.getFacesContext(FacesContextFactoryImpl.java:64) at oracle.adfinternal.controller.application.FacesContextFactoryImpl.getFacesContext(FacesContextFactoryImpl.java:56) at oracle.adfinternal.controller.application.model.FacesContextFactoryImpl.getFacesContext(FacesContextFactoryImpl.java:70) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:260) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.tip.b2b.ui.util.SessionTimeoutFilter.doFilter(SessionTimeoutFilter.java:240) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:143) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks
Satendra Pare

Which version of weblogic and SOA suite have you installed? Which OS are you using? Check on em whether soa-infra is up?
BTW, for Oracle B2B related questions, you should raise threads in Oracle B2B forum -
Integration - B2B
Regards,
Anuj

Error starting the MDM server in client system

Hi MDM Experts,
I am new to MDM and we have just installed MDM 5.5 on our system. We are able to 'Mount the Repository' via the MDM Console on the client side but when we try to 'Start MDM Server', we encounter the error below:
"Error starting MDM server: The machine (server name) is not Windows-based. The MDM server cannot be started from this application; please use CLIX on the machine instead."
What must we do to resolve this error? Please help us on this matter.
Thanks in advance!
ASP

Hi ASP,
MDM server operations can Be performed through Console only if your Server is Windows based.
You can perform the some repository options through Console ,but for any Server based operations like Mounting the server,Start/Stop server etc you will have to operate through the CLIX ie Command line interface.
I Guess yours is a Unix based system or something else which is not Windows based.
so it will not allow you,
Either you install your server on a windows based system to operate through Console.
Or if you want to continue with the NON windows based system then you will have to use CLIX for most of your Console opeartions.
Hope It Helped
Thanks & Regards
Simona Pinto

MDM Server Logs errors

Similar Messages

Maybe you are looking for