MDM syndicator, Root path is disabled

Hi
I have created xsd version of my repository and in the MDM syndicator, Root path is disabled.
should I have to create xsd root file or how can I do that
thanks
Manian

Hi Manian,
if your root path is disabled, i.e. you cannot select any, when you are specifying your schema file, then most likely there is an error in the xsd file. Try to validate it again.
Otherwise, if you refer to the mapping part:
1. You set up "XML File Output" to "Multiple Files" in the Map Properties, then you do not need the root element anyway.
2. You set up "XML File Output" to "Single File" in the Map Properties, then you need to specify a repeatable node name. If this is supposed to be your root, then you need to specify another root node in the xsd.
Best regards
Christian
Edited by: Christian Heuer on Jul 8, 2008 4:08 PM

Similar Messages

Syndicator : Root identification for XSD (schema) file

Dear MDM Pals,
Scenario :XSD file (DEBMDM06) customization and Syndication set up in MDM Syndicator.
Details: There is a need to customise xsd file at one segment level. Only the names of elements in a segment are changed - XSD structure is untouched.When this is done , and used in syndicator , the root of xsd schema file is not getting recognized.As a result, not able to proceed with Syndication set up process.
Please advise -
a) What needs to be taken care in XSD schema file modification ?
b) MDM syndicator set up (if any) to handle custom XSDs.
Awaiting quick help on this please.
Regards,
Vinay M.S

Hi Vinay,
Make sure that the root element name as in the XSD exactly matches with the Repository Schema main table name.
This name should be exactly same in all respects.
Also make sure you save and upload this newly customized schema in your MDM console correctly with a new name,and then try using this schema in your MDM syndicator.
Hope It Helped
Thanks & Regards
Simona Pinto

Need to add a new field to the Schema for MDM Syndicator

We are running MDM 5.5 SP6.
We have a requirement to add a new field and syndicate the new field to the our Procurement System.
I was able to add the new field to the repository and schema in SAP MDM Console. However, when I went into the Syndicator to map the new field (which I do see) to the new Schema field, I don't see the new field to map in the Schema.
How can I change the existing syndication jobs (11 of them) to use the new Schema? Or do I have to recreate all of them?
Thank you in advance!!!

Hi Janynne,
I hope you have modify the Syndication XSD(add new field) and then load it in XML Schema table of MDM Console, right ?
If you have done it, now open MDM Syndicator>Go to File>Open, select the required Remote system and Available map.
Now your existing map will be loaded which has not the required added field, Now again, go to file-->Export.
Give file name and save this syndication map on your Desktop. Once you have done this.
Go to File>New>Select respective remote system and Type as XML Schema if you have loaded this XSD in Console else select Type as XML Schema file and select the modified XSD (added new field XSD) from Desktop. Once it is loaded, import the existing syndication map(which you have exported as said above) which should have all the fields mapped, now in target side you will have here new added field too, map it with required source field in Item Mapping and then go to file>Save as>select the required Remote system and give new map name. Use this map for exporting files for future reference.
Also, if your are using Port Concept, you need to change the Properties Map and XML Schema in Port of MDM Console.
Regards,
Mandeep Saini

Flex mobile project: web root and root path for a remote web service?

Hi all,
i'm trying to set up the testdrive tutorial for flex mobile project, with flash builder 4.5
and php data.
I've uploaded the files on my remote web space (e.g. http://mywebsite.org, and the
test file is http://mywebsite.org/TestDrive/test/test.php... and it works
correctly)... But when i'm setting properties of the project, i don't know what
to write into the web root and root path fields... I thing root path is simply
http://mywebsite.org... and whatever i write in the other fields (output folder
too) i have errors when i click on "validate configuration"...
What should i put into those fields? is zend framework (and gateway.php)
strictly necessary?
As you can see... i'm a bit confused....
Many thanks for any help
Bye
Alex

I thought it was a simple question...
No advice?

How to set FileSystemWatcher powershell script to exclude folders within the root path being monitored?

All,
I want to use a pre-fab script to monitor the OS folders on a Windows 2008 R2 Domain Controller and send any changes into the Event Log. But there are two folders in the file path I want to exclude because changes to them would fill up the Event Logs
too quickly. Thus, I want to monitor all folder in C:\Windows but want to exclude C:\Windows\Temp and C:\Windows\debug.
The script I want to use is below.
#This script uses the .NET FileSystemWatcher class to monitor file events in folder(s).
#The advantage of this method over using WMI eventing is that this can monitor sub-folders.
#The -Action parameter can contain any valid Powershell commands.
I have just included two for example.
#The script can be set to a wildcard filter, and IncludeSubdirectories can be changed to $true.
#You need not subscribe to all three types of event. All three are shown for example.
# Version 1.1
$folder = 'C:\Windows' # Enter the root path you want to monitor.
$filter = '*.*' # You can enter a wildcard filter here.
# In the following line, you can change 'IncludeSubdirectories to $true if required.
$fsw = New-Object IO.FileSystemWatcher $folder, $filter -Property @{IncludeSubdirectories = $true;NotifyFilter = [IO.NotifyFilters]'FileName, LastWrite'}
# Here, all three events are registerd. You need only subscribe to events that you need:
Register-ObjectEvent $fsw Created -SourceIdentifier FileCreated -Action {
$name = $Event.SourceEventArgs.Name
$changeType = $Event.SourceEventArgs.ChangeType
$timeStamp = $Event.TimeGenerated
Write-Host "The file '$name' was $changeType at $timeStamp" -fore green
Out-File -FilePath c:\scripts\filechange\outlog.txt -Append -InputObject "The file '$name' was $changeType at $timeStamp"}
Register-ObjectEvent $fsw Deleted -SourceIdentifier FileDeleted -Action {
$name = $Event.SourceEventArgs.Name
$changeType = $Event.SourceEventArgs.ChangeType
$timeStamp = $Event.TimeGenerated
Write-Host "The file '$name' was $changeType at $timeStamp" -fore red
Out-File -FilePath c:\scripts\filechange\outlog.txt -Append -InputObject "The file '$name' was $changeType at $timeStamp"}
Register-ObjectEvent $fsw Changed -SourceIdentifier FileChanged -Action {
$name = $Event.SourceEventArgs.Name
$changeType = $Event.SourceEventArgs.ChangeType
$timeStamp = $Event.TimeGenerated
Write-Host "The file '$name' was $changeType at $timeStamp" -fore white
Out-File -FilePath c:\scripts\filechange\outlog.txt -Append -InputObject "The file '$name' was $changeType at $timeStamp"}
# To stop the monitoring, run the following commands:
# Unregister-Event FileDeleted
# Unregister-Event FileCreated
# Unregister-Event FileChanged
Is there a command line I can use to exclude thos two folders?
Thanks

First, thank you to everyone who has been helping me. I've gotten a little bit further in what I need to do. I still have two problems that I really need help in sorting out:
1. The script will run on Windows 7 with no errors but will not run on a Server 2008 R2 Domain Controller. On the DC, I get an error for the SourceIdentifier: "A parameter cannot be found that mataches parameter name 'SourceIdentifier'."
2. Even though the script runs on Windows 7 with no errors, I tested it by making changes to the Temp and debug folders and the changes were still being recorded in the logs.
A copy of the updated script I am running is below:
#This script uses the .NET FileSystemWatcher class to monitor file events in folder(s).
#The advantage of this method over using WMI eventing is that this can monitor sub-folders.
#The -Action parameter can contain any valid Powershell commands. I have just included two for example.
#The script can be set to a wildcard filter, and IncludeSubdirectories can be changed to $true.
#You need not subscribe to all three types of event. All three are shown for example.
# Version 1.1
$folder = 'C:\Windows' # Enter the root path you want to monitor.
$filter = '*.*' # You can enter a wildcard filter here.
# In the following line, you can change 'IncludeSubdirectories to $true if required.
$fsw = New-Object IO.FileSystemWatcher $folder, $filter -Property @{IncludeSubdirectories = $true;NotifyFilter = [IO.NotifyFilters]'FileName, LastWrite'}
# Here, all three events are registerd. You need only subscribe to events that you need:
$Script:excludedItems = 'C:\Windows\Temp','C:\Windows\debug'
Register-ObjectEvent $fsw Created -SourceIdentifier FileCreated -Action {
If ($excludedItems -notcontains $Event.SourceEventArgs.Name) {
$name = $Event.SourceEventArgs.Name
$changeType = $Event.SourceEventArgs.ChangeType
$timeStamp = $Event.TimeGenerated
Write-Host "The file '$name' was $changeType at $timeStamp" -fore green
Out-File -FilePath c:\scripts\filechange\outlog.txt -Append -InputObject "The file '$name' was $changeType at $timeStamp"} }
Register-ObjectEvent $fsw Deleted -SourceIdentifier FileDeleted -Action {
If ($excludedItems -notcontains $Event.SourceEventArgs.Name) {
$name = $Event.SourceEventArgs.Name
$changeType = $Event.SourceEventArgs.ChangeType
$timeStamp = $Event.TimeGenerated
Write-Host "The file '$name' was $changeType at $timeStamp" -fore red
Out-File -FilePath c:\scripts\filechange\outlog.txt -Append -InputObject "The file '$name' was $changeType at $timeStamp"} }
Register-ObjectEvent $fsw Changed -SourceIdentifier FileChanged -Action {
If ($excludedItems -notcontains $Event.SourceEventArgs.Name) {
$name = $Event.SourceEventArgs.Name
$changeType = $Event.SourceEventArgs.ChangeType
$timeStamp = $Event.TimeGenerated
Write-Host "The file '$name' was $changeType at $timeStamp" -fore white
Out-File -FilePath c:\scripts\filechange\outlog.txt -Append -InputObject "The file '$name' was $changeType at $timeStamp"} }
# To stop the monitoring, run the following commands:
# Unregister-Event FileDeleted
# Unregister-Event FileCreated
# Unregister-Event FileChanged
Thanks in advance for any help you can give.

How can I use a weblogic server's root path in an XML?

Hi all,
I hope I posted this to the correct newsgroup...
Anyway, I have a question about getting a Weblogic (9.2) server's root directory in an XML config file. I'm trying to use a log4j.xml file to set up a logger for my application, but when I use just the file name in the "file" parameter for the Appender, the logger writes the file to the domain directory. I'm avoiding hard-coding of the server path because the deployment system's configuration may be different than mine.
So, is it possible to get the server's root directory in an XML config file?
Thanks for the help!

By the way, here's the XML:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
<appender name="mibLogFile" class="org.apache.log4j.DailyRollingFileAppender">
    <param name="File" value="mib_application.log" />
    <param name="DatePattern" value=".yyyy_MM_dd"/>
    <param name="Append" value="true"/>
    <layout class="org.apache.log4j.PatternLayout">
      <param name="ConversionPattern" value="%d{MM/dd/yyyy HH:mm:ss} [%t] %c %x%n %-5p %m%n"/>
    </layout>
</appender>
<root>
    <level value="info"/>
    <appender-ref ref="mibLogFile"/>
</root>
</log4j:configuration>I tried using "$WL_ROOT/logs/" at the start of the file name, thinking that $WL_ROOT would work for the env variable for the server root path. But it doesn't exist, and I don't think I'll have access on the deployment server to add any environment variables, so I was hoping to use something native to Weblogic. Any thoughts??

The root path of location OUTPUT_FILE_DIR

The root path of location OUTPUT_FILE_DIR must be specified as one of the file paths for the UTL_FILE_DIR parameter in the init.ora for the runtime instance. The root path of location OUTPUT_FILE_DIR must be a file path on the server.
give me some hints

Sorry, what is the context of "location OUTPUT_FILE_DIR"?
Nikolai Rochnik

Root path links and tomcat

Hi!
I'm using tomcat 5.5 and I made a simple webapp:
tomcat_dir/webapps/myapp
I'm using root paths when refering to images, docs, servlets, and so within myapp (servlets, jsp, html, etc.)... For example:
<img src="/myapp/imgs/pic1.jpg" ...>
<form ... action="/myapp/servlets/sendMail.do">
request.getRequestDispatcher("/es/thanks.jsp");all this root path links works fine whenever I'm running my web app from localhost (http://localhost/myapp/index.html) but whenever I running it from internet (http://myapp.mydomain.com) I can't get the web app to work, instead I get the glamorous HTTP 400 error
What do I'm doing wrong? I've tried using relative paths and myapp works both localhost and internet way... but what do i need to do to use root paths?
thx

when u are getting error code 400, pls notice what the url has formed...copy and paste it here inthis forum..

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

AD "Root Path" GPO property as home

Hello,
I have an AD integration question. On our Windows
network the "Root Path" GPO user property is being
used. Can this path be utilized by 10.4.7 as home
dir.?
This GPO seems to have no effect with the "Use UNC
path..." Directory Access setting checked and "Force
local home..." unchecked. What does work however is
hardcoding the "Connect Z: To:" AD property.
Any suggestions much appreciated,
Thank you
Mac OS X (10.4.7)

The issue you are likely running into is the fact that OS X does not support DFS shares. You need a third party product (http://www.thursby.com/products/admitmac.html) to pull that off. The closest you can try is to identify which server in the DFS cluster contains the home folder and attempt a direct map to that server. Permissions and inheritance will likely not function, but since this is a home folder you may not care.
Also, I remember the guys from ExtremeZ came up with a fake DFS solution but I can not recall the details.
Hope this helps

Get Root Path

Hello All,
I run the following code on my computer but, return me the location of JRE and not the root path of program?
public class GetRootPath {
     * @param args
     public static void main(String[] args) {
          String path = ClassLoader.getSystemResource(".//").toString();
          System.out.println(path);
The output is : file:/C:/Programs/Java/jre1.5.0_06/lib/ext/X86//
as you know this should return the root path not the JRE location,
i run that code in another machine and it work properly, so
why it did not work on my machine?
any one know, how i can resolve this problem?
thanks!
Hamzeh Khazaei

This will print the current working directory
System.out.println(System.getProperty("user.dir"));#

Webapp root path

Hi all,
How do I find a JSP application's root path in a help class used by a java bean? I use Tomcat 4 and what I want is the /webapps/app path.
BR
Markus

application.getRealPath("/");

How to List the Root Path?

Hi all,
How can I list the root path? (windows: "My Computer", UNIX: / )
I tried
File f = new File("/");
String s = f.list();
It didn't work....
Thanks for your help.

What do you mean doesn't work, works just fine.
String s = f.list();should be String[]

[solved ... :P] yaourt - 'm' is not a valid root path

[root@pwn etc]# yaourt -noconfirm -Sybu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
local database is up to date
error: 'm' is not a valid root path
Aaahhh!!!
Noooo!!!
Don't!!!!
How can I fix it?
Last edited by synthead (2007-09-24 02:23:18)

it's --noconfirm, with '2' hyphens

Failed to get root path for 'UED'

Good afternoon.
I have a problem with my IDES installation in University.
After a server reboot, MAXDB doesn't want to give up.
This is the log:
$ tail startdb.log
Error! Connection failed to node dolphin for database UED: database not found
Opening Database...
Failed to get root path for 'UED'
Error! Connection failed to node dolphin for database UED: database not found
Fri Aug 24 17:11:11 CEST 2007
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
If I try to run dbmcli manually, I receive the same error:
$dbmcli -u control,****** -d UED
Failed to get root path for 'UED'
Error! Connection failed to node (local) for database UED: database not found
Any suggestions??
Regards,
Luca

Hi Markus,
I think that my problem is not completely solved.
In fact, now the IDES system is on , but I'm not able to login into it.
When I select UED system on menu of my JAVA GUI and press "connect button", I can't access to SAP login window. (see )
I'm sure that is not a "network problem" of my laptop. (the problem persist also with others SAPGUI).
I've tried to <b>reboot</b> the server, but the situation is always the same. No way to access into the system, popup "connecting" reman.
If I try to see process that are running in the server, via "top -u uedadm" command, this is the situation:
3791 uedadm    16   0 87988 9768 1996 S    0 0.2   0:00.00 sapstartsrv
4775 uedadm    15   0 54664 1580 904 S    0 0.0   0:00.04 csh
4911 uedadm    16   0 54664 1604 920 S    0 0.0   0:00.05 csh
5388 uedadm    20   0 26788 1896 1064 S    0 0.0   0:00.04 sapstart
5408 uedadm    16   0 35736 5748 3024 S    0 0.1   0:00.06 ms.sapUED_DVEBM
5409 uedadm    16   0 4480m 100m 86m S    0 2.5   0:00.95 UED_00_DP
5410 uedadm    16   0 27528 2988 2224 S    0 0.1   0:00.05 co.sapUED_DVEBM
5411 uedadm    16   0 27488 2952 2216 S    0 0.1   0:00.04 se.sapUED_DVEBM
5412 uedadm    18   0 17620 2432 1800 S    0 0.1   0:00.01 ig.sapUED_DVEBM
5413 uedadm    16   0 210m 12m 3352 S    0 0.3   0:00.20 igsmux_mt
5414 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.16 igspw_mt
5415 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.19 igspw_mt
5430 uedadm    15   0 188m 8296 5972 S    0 0.2   0:00.05 gwrd
5431 uedadm    18   0 164m 4376 2844 S    0 0.1   0:00.63 icman
5432 uedadm    17   0 4486m 22m 7988 S    0 0.6   0:00.01 UED_00_DIA_W0
5433 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W1
5434 uedadm    16   0 5201m 79m 63m S    0 2.0   0:00.82 UED_00_DIA_W2
5435 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W3
5436 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W4
5437 uedadm    16   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W5
5438 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W6
5439 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W7
5440 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_DIA_W8
5441 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W9
5442 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W10
5443 uedadm    17   0 4486m 22m 7984 S    0 0.6   0:00.01 UED_00_DIA_W11
5444 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.02 UED_00_UPD_W12
5445 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.01 UED_00_UPD_W13
5446 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_UPD_W14
5447 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_ENQ_W15
5448 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_BTC_W16
5449 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_BTC_W17
5450 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_BTC_W18
I think that is not a performance problem of server, because
"free -m" command
                   total       used       free     shared    buffers     cached
Mem:          3946       2249       1697          0         50        950
-/+ buffers/cache:       1247       2699
Swap:         8001          0          8001
Can you please me, give some suggestions?
Thank you very much.

MDM syndicator, Root path is disabled

Similar Messages

Maybe you are looking for