MDM system access to SAP

Hi,
Could anybody please tell how to maitain system data for an MDM system and the procedure to open MDM system access to SAP thru WTS? I tried to create system data for MDM system but I dont know what value to provide for SID as MDM system does not have three digit SID just like regular SAP systems.
Any response is greatly appreciated.
thanks
Chandu...

Okay one more read of ur Issue hints that u r more concerned with opening ur MDM box for some SAP support connection,'
U can do this:
1. update ur ticket asking SAP to open a webEX session and either of you two parties can be the leader and run the show.
2. If you insist on WTS way, then install the normal MDM GUI clients on the Terminal server and let SAP login into it and access your MDM box.
points to note:
it really depends on your landscape: how many ports u want to expose to outside world via WTS just for this session. etc etc. and also on your MDM installation environment...like DB & App server & clients on 3 different servers...then u end up hooking up WTS to all these three with access granted to SAP for all the logs on these various nodes.
My suggestion, go for webEX....... u run the show, pick up that phone and show them all the logs they want at your comfort.!

Similar Messages

MDM System Access

Question (from ISV):
I need some clarification. Since we have access to XI in the hosted environment, and MDM is part of NetWeaver, can we assume that we do indeed have access to MDM in the hosted environment? Or is access to MDM not part of our XI+1 agreement?
Answer (from ICC Consultant):
We currently do not have MDM on our hosted environment:
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/15330f73-0501-0010-d59e-8a32e220b2ed [original link is broken]

I've seen some RKT's workshops specially for MDM, from the very begining up to some tests and advanced functionality.
You should be able to access them throug http://service.sap.com/rkt if you are a partner/customer/SAP employee.
Otherwise you can use the SDN (free) resources. However, you can't download it from here, only from market place
Greetings
Alejandro

Non sap system access from SAP

Hi,
I have to pick a file from non sap server to sap server , also i have to execute a software on non sap server .Please tell me the
steps .

Generic questions require generic answers:
> I have to pick a file from non sap server to sap server
Open explorer and copy the file.
> , also i have to execute a software on non sap server .Please tell me the steps .
Install the software and execute it.
Seriously, if you have a question be as specific as possible. We don't know anything about your environment so nobody can give you a suggestion what you can do to solve your issue. We have no operating system, no database, what kind of "file" that is, which data it contains, what kind of non-SAP software this is, how you want to execute it....
The more specific you are the higher is the possibility that someone had a likewise issue and has a suggestion.
Markus

How to Open a Our System's Connection For access by SAP AG

Dear Sir/Madam,
For our sap system access by SAP AG, I need to OPEN my SYSTEM and to provide LOGON DATA to SAP AG.
Would any one help me HOW TO OPEN MY SYSTEM for SAP AG ACCESS and by LOGON DATA, what they mean.
Our SAP system is ECC5.0
Product Version SAP ERP 2004
Operating System AIX 5.3
Database ORACLE 9.2.0.4.0
Technical Usage Type ERP Central Component (ECC)
Any Pointer will be highly appreciated.
Thanks and Rgds,
Pranab

Hi,
Check this link
http://service.sap.com/serviceconnection
Note 35010 - Service connections: Composite note (overview)

How to access the SAP MDM destinations using mdm java api in 7.1

hi,
I have SAP MDM 7.1 SP11 and SAP Portal 7.3 and developing the custom webdynpro application using the JAVA MDM API. I want configure the SAP MDM destinations in SAP Portal .
How to access the MDM destinations in java code using API? and how to create the connection with MDM using the MDM destinations.
Please provide the code for access the SAP MDM destinations in java code using MDM java api and creating the connection to MDM.
Thanks

Jun,
Thanks for the reply and api information.
I have got this api information from the following sap documentation. But i am looking for the code by implementing this class and creating the mdm connection.
Creating an MDM Connection Using Java Code - SAP NetWeaver Master Data Management (MDM) - SAP Library
if any thing can you share it.
Thanks

SAP File System Access - SLD Naming Convention/Suggestions

I would like to access our ECC file system to pick up files we will use to create Idocs.
I'm wondering the best way to describe the file system access in the SLD.
I have a business system for the main client on the ECC system (BS_ED1CLNT010) for example but the OS isn't client specific.    I could use this as the Business System in the scenario and define a file adapter that connects to the unix server.
Any thoughts?

Maybe I didn't frame my question properly.
In the ECC system we have multiple clients (20,30,40, etc). If I am going to post an Idoc to a client in this system I need to define each as a business system in the SLD and import this to the Integration Directory.    So I would have BS_XXXCLNT010, BS_XXXCLNT020, etc, one for each client.   These all share the same Technical System.    If I want to post an Idoc to a client on the ECC system I have to define a Business System and interface to that and every client that will receive an Idoc. (as well as the ALE settings on the ECC)
Each of these reside on the same SAP server (sap00001 for example) and there is a directory (/public for example) on this server.     This isn't client specific.
I wish to pick up a file from the ECC file system and post a client on the ECC system (maybe different ones based on the data in the file).
I don't want to define the file adapter under BS_XXXCLNT020 since it isn't specifc to client 020 although that would work.
Do I create a new TS in the SLD as third party, stand alone java, and a BS for that?    TS_XXX_FILESYSTE (3rd party). BS_XXX_FILESYSTEM for the TS?
I'm really looking for clarity in the definition of the SLD.

Access to EHS data from system outside of SAP

We are creating a Formulation tool in a SQL database with a Access front end which will need to use EHS Specification data and eventually push the Formulation data back into the SAP EHS Spec database.
I would like this new database to have Real-Time access to SAP data. We currently are using RFC connections with tools such as EASY-Expert and a external Rules based program Atrion as well, so I know it is possible to feed this data back and forth using XML files.
Any advice on how I should proceed and maybe some external tools for purchase that will help me do this.

Hi Beverly,
it is possible to access EH&S data from outside SAP by using the standard SAP BAPIs (e.g. BAPI_BUS1077_GETDETAIL for reading EH&S data) which are RFC enabled. Another possibility would be to develop your own RFC enabled function modules in the SAP system and call them from outside.
From your access database you can use VBA to perform the RFC call.
Best regards,
Andreas

In Portal MDM system missing

Hi,
Iam using the discovery system for creating a POC i was going through a SDN demo on MDM portal where they have show me to create a MDM folder and assign it to the MDM system templete. Here Iam not getting this MDM SYSTEM Can any one help me in this please.
Iam struck here in Potal part of MDM.
Thanks,
Suresh

Hi Sridhar,
Go to SAP Service Market place http://service.sap.com
Select
Software Downloads>>Entry by Application Group>>Support Packages and Patches>> SAP NetWeaver>> SAP MDM>> SAP MDM 5.5>>Portal Content
download the following 2 files.
1. BP MDM APPLICATION 5.5
2. BP MDM TECHNOLOGY 5.5
The above 2 files are available via SAP Solution Manager.
Thanks
Subbu

Extended Notifications with Links while using Citrix to Access Hosted SAP

Hello,
I am working on a system which is hosted remotely where Citrix and Single signon are used to access the SAP instance. I need to be able to send email to their Outlook server with executable links back to the workitems. I had planned to use Extended Notifications to get this done. I am fine with everything except for the Citrix link. I am not sure whether the link in the email will be able to find its way through Citrix to the SAP instance. I also need to know the SSO is going to work - it seems at a minimum they would need to sign on to Citrix. Has anyone out there done this, or at least know whether it would/should/won't work?
Thanks in advance for any help you can offer,
Jeff Gray

As far my knowledge, on Citrix it won't work. As far portal is concerned, it will work.
Regards, IA

Error while creating MDM system on Portal

Hi All,
I am trying to create MDM system in EP. MDM is 5.5 SP06. EP is 7.0 . We have upgraded the MDM sca files on Portal from SP05 to SP06.
While creating the system , after entering the server, we are getting the following error.
com.sap.mdm.internal.protocol.manual.ServerException: File failed a crc check
Please help
Regards
Shilpa

Hi Shilpa,
If this is your MDM build version 5.5.63.80 SP06. It means you are using MDM 5.5 SP06 Patch3 hotfix 80.
You need to find the Sca file of compatible with this version.
So they should be
- MDMJAVAAPI06_03.sca
- BPMDMAPPLN06_03.sca
- BPMDMTECHN06_03.sca
The hotfix number can slightly differ but the Support pack and patch number must match.
You need to follow this link:
http://service.sap.com/swdc
(download MDM support packages) Download>support packages and patches>entry by application
group>sap netweaver>sap mdm>sap mdm 5.5>Entry by component>Portal content
Then select which MDM portal content you want and check what is the version of those available sca files.
based on the availablity of the sca files you need to upgrade/downgrade or server.
As compatibility between the server version and sca files is a must for proper functioning.If its not possible to change your mdm server version then you can ask your Basis team to hunt the matching sca files for you.
Hope It Helped
Thanks & Regards
Simona Pinto

SAP MDM field status and SAP ERP field status

Just wanted to understand what are the implications of a field status mismatch between SAP MDM and SAP ECC for Vendor Masters. Further, what happens in a scenario where the vendor master data is changed directly in SAP ECC. I am presuming that both systems will not be in sync as the MDM system talks one way and updates the SAP ECC system. Or is there a feasibility whereby any change carried out in SAP ECC is also routed back to SAP MDM.

Hi,
Basically MDM is implemented in order to maintain Master Data at single location, such that control can be incorporate in flow of Master Data.
Thus it is recommended that master data should be changed or created in MDM itself and than syndicated to other systems.
But in case Master Data need to be changed in ECC, MDM ABAP API's can be used to update data in MDM Repositories directly from ECC so that Master Data remains in Sync.
(Using MDM ABAP APIs, code can e developed in ECC to update fields in MDM.)
Regards,

Extract Tables/views into ECC 5.0 SAP system from Non-SAP system

Hi,
I am looking for some inputs on how to set up the following scenario of extracting data stored in tables/views in a non-sap external system into my SAP ECC 5.0 SAP database.
Currently we are using a middleware between SAP and the external system to fetch data. I would like to get rid of the middleware and set up a scenario to call this non-sap external system and pull data stored in views into our SAP system directly. Is that possible in SAP version 5.0? If yes let me know the steps to be performed... do I need to set up XI ?

maybe you can access sap data using some connector such as java or .net connector.

How to map Portal User groups to a MDM System?

Hi,
Have anyone tried mapping portal user group to a MDM System?
The idea is to avoid each user to do user mapping for MDM of their own.
When i look into the usermapping section of a portal user group, it shows me a message -
"There are no systems available for user mapping for the selected principal"
Thanks and best regards,
Arun prabhu S

Hi All,
Got it!
1. Create portal users,
2. Create a portal user group,
3. Assign Users to User group,
4. Go to System Administration, edit permission of the MDM system, add the user group to the MDM system permission list and save
5. Go to User Management, modify the user grooup, go to the User mapping of the user group and do mapping for MDM system and user group using a valid MDM User name and password and Save
6. In User Management, modify the Portal role for MDM , add the user group to the role and save
7. Edit permission of the role object, add the user group to the permission list and save
Result:
All the users assigned to the user group will be able to access MDM information on the portal correspond to the MDM mapping done at the user group level. This avoids self user mapping in personalization link.
Best regards,
Arun prabhu S

Crystal Reports: access to SAP BW tables in own namespace

Hi BO experts
we are running XI3.1 SP2 including reporting tools, integration kit and so on. The installation and the integration to SAP BW is working properly for most szenarios.
Starting from Crystal Reports we would like to access a SAP BW table which was generated in an own namespace. By starting the database assistant we are connecting with the driver "SAP-tables,-clusters,or -functions" and see some tables in "DD (data lexicon)". But we can not find the self generated table in there. It is only possible to access the tables in namespace "/1CPMB/", "/B28/" and "/BI0/".
How can we access tables from another namespace? Are there any restrictions for accessing SAP BW tables, e.g. namespace, configuration, settings etc.to stick to?
Thank you very much for your suport in advance.
Kind regards.
Markus

Hi Markus,
just go to the Database Expert, select the connection to your BW server on the left window, press the right mouse button and choose Options from the context menu. In the field Table name LIKE: you can restrict the names of the displayed tables:
eg. assuming your namespace is /ZMYNSP then just give there /ZMYNSP% ( % is a wildcard)
Close then the Options window and choose Refresh using again the context menu (or just press F5)
CR can only display a limited number of tables when you expand your BW System and by using the Options panel as described above you can let the system display exaclty the tables you need.
Regards,
Stratos

Create a table and upload data in MS ACCESS from SAP ABAP programming?

Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.

Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

MDM system access to SAP

Similar Messages

Maybe you are looking for