MDM to AFS
Hello Experts,
Question about receiving Inbound parameters from MDM 5.5 SP5 to AFS 5.0. Can AFS receive the ARTMAS message type from MDM, or can it only receive MATMAS message type for the creation of new materials? When sending ARTMAS, we encounter the following inbound IDoc error:
"Retail materials cannot be maintained in the industry system"
Any idea/suggestions on what is causing this or how to go around this error?
Additionally, can two separate repositories in MDM be synched? So say we have a repository1 and a repository2. Both share some fields. Can updates to one also reflect in the other?
All help would be much appreciated.
Cheers,
Marat
Hi Marat,
Though I have no experience on your scenario, here´s what I found:
1. ARTMAS error - ARTMAS01 can be created in the AFS system , probably you need to check the ALE configuration -reprocess the Idoc in We19(or the corresponding AFS transaction if it is different) and check the processing ,it will help determine the cause of the error
http://help.sap.com/erp2005_ehp_02/helpdata/en/f4/2dc8a2d56111d29e6700805f8f496c/frameset.htm
2. MDM has a master slave concept , where the slave repository can be synchronised with the master. More information can be found in the console reference guide available at http://help.sap.com/erp2005_ehp_02/helpdata/en/f4/2dc8a2d56111d29e6700805f8f496c/frameset.htm
Hope this helps !
Regards,
Anita
Similar Messages
-
AFS & MDM (update...)
Hi all
i have been looking for some SAP official documentation about scenarios between SAP Apparel Footwear Solution and SAP MDM to material/article master data; my questions below:
- Does exist some documentation about the real scenarios where it consider the integration between AFS and MDM? ie. create the article/material master data from SAP MDM as the main source and synchronize the information to AFS and its "how to..."
(http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0cb1c2c-f19a-2d10-8387-d7ed00092896?quicklink=index&overridelayout=true - here there are 6 options for master data model design, so can we use one of them?)
- Which repository should I use? (Until SAP MDM 5.5, there was a business content for Article master. However, from SAP MDM 7.1 release, this business content is no longer provided - See SAP Note 1276909)
- Which iDocs are availables for this scenario?
- Is the best practice integrating these modules?
- Can i get updated information of these themes? 2010+
Thank for your help!
Pp-the example given are based on MDM 7.1 only .. so no worries on that.
-iDocs (as in doc)- AFSMATMAS Material Master Data IDoc in the AFS System
J3AGRI02 Master Grid Data iDoc in the AFS System
- u can have MDM as a leading master data creation cockpit and then syndicate data to ECC AFS
thanks
-Adrivit -
Hi!
I need report similar to /AFS/MD04 AFS stock req list but for all material of one sale order on onew screen.
User want to see statuses for allpositions of order at one time to make decision about delivery.
any standart report?
Andrey Garshin.Hi Andrey,
I don't see a benefit from seeing statuses in a sales order.
/AFS/MD04 is a stock/requirements list for the MRP conroller.
It does a complete different calculation than ARUN or ATP.
It will not help you to determine what can delivered.
You can have orders in B status and still be able to allocate and deliver it.
So explain your business requirements. What do you want to see?
Best Regards,
Markus
Edited by: Markus Doerr on Jun 8, 2010 10:16 AM -
Table for temporarily stock /requirement for tocde /afs/mdo4
Dear expart,
I developed a zreport for display STO number, Production order number, operation etc.
mainly I use here AFPO,AFRU, MSEG, MCHB & J_3ABDSI Table.
My problem is, when I compare with Tcode /afs/md04 tab-temporarily stock /requirement .
for some MATNR
data show properly.
and some MATNR are blank with message Last MRP run on 04.04.2011 or such date.
Hhow i can filter the in Z-report which MATNR are not in Tcode /afs/md04 tab-temporarily stock /requirement .
my code is.
SELECT j_3abdsiaufnr j_3abdsimatnr j_3abdsij_4krcat j_3abdsimbdat j_3abdsi~menge INTO TABLE it_eket FROM j_3abdsi
FOR ALL ENTRIES IN it_final1
WHERE
j_3abdsi~j_4krcat = it_final1-j_4ksca AND
j_3abdsi~matnr = it_final1-matnr AND
j_3abdsi~werks = it_final1-werks AND
j_3abdsi~bdart = 'TB' AND
j_3abdsi~plart = 'B' AND
j_3abdsi~bsart = 'UB'.
Pls help .
Rayhan
Edited by: Abu Rayhan on Apr 5, 2011 10:24 AMCLEAR i_data1.
REFRESH i_data1.
LOOP AT i_mara.
READ TABLE i_marc WITH KEY matnr = i_mara-matnr BINARY SEARCH .
IF sy-subrc = 0 .
CALL FUNCTION 'J_3AM_DISPOSITION_DISPL'
EXPORTING
i_matnr = i_mara-matnr
i_werks = p_werks
I_DIALOG = ' '
I_SPERR = ' '
I_AUFRUF = ' '
I_BANER = ' '
i_todate = todate
I_HEADER_ONLY = ' '
IMPORTING
ex_dbba = i_data3
E_MDKP =
EX_PBBD =
EX_MELD =
E_CM61M =
EXCEPTIONS
material_gesperrt = 1
wbz_fehler = 2
material_prgr = 3
dispo_gesperrt = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF i_data3[] IS NOT INITIAL.
LOOP AT i_data3 INTO i_data4 .
IF ( i_data4-j_3astat ='A' OR i_data4-j_3astat ='T') AND i_data4-j_3abskz ='C' .
READ TABLE i_t001l WITH KEY lgort = i_data4-lgonr BINARY SEARCH .
IF sy-subrc = 0 .
CLEAR i_data1str.
i_data1str-matnr = i_data4-matnr.
i_data1str-j_3asize = i_data4-j_3asize .
i_data1str-lgort = i_data4-lgonr.
i_data1str-menge = i_data4-menge .
COLLECT i_data1str INTO i_data1.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
Questions
i_mara recordset 500 material
It take more than 3 house to finished this report.
do changed ?
do you help me ?
Think. -
Error while opening MDM Data Manager
Hi,
We are getting the following error while trying to open Data manager on our repository.
"Error Initializing Attributes for table Taxonomy
Application will exit
Already exists"
mds Version 5.5.42.90
MDM DataManager Ver5.5.42.90
The repository loads without any errors. The server log file too doesnt show any errors.
Is there anyway to fix this?Go to your MDM console, Login to repository and Unload repository first.
Then load with Update Indices.
This problem comes when you change anything in schema in console and then load repository with immediate option.
So always prefer to use update indices as accelator files will get updated and data comes from actual database.
If the problem still persists then Go again to console and check your repository for any fatal error. if errors come then repair repository and if not come then also repair.
Then load with update indices.
Hope it will help you.
BR,
Alok
Edited by: Alok Sharma on Feb 14, 2008 9:20 AM -
Change of Item Categoy in Sales Order - AFS
Hi Gurus,
I am working on AFS. In the sales order for which delivery has not been created, system is not allowing to change the item category. From TAN to TAQ.
I have maintained the Manual item category in VOV4. Still the item category field in sales order is in grey mode.
Please let me now how to make it editable.
Regards,
Naren DevHi Naren,
Can you please check if that item has any associated Purchase Requisitions?
Standars SAP does allow change of item category if alternative item categories are configured and subsequent document are not yet created.
Thank you
Chaitanya -
What are the corresponding Data Types of some MDM Data Types
Hi Guys,
The MDM ABAP API involves creation of a DDIC structure in SRM. This structure should have the same fields with the MDM table fields. We would like to ask the corresponding ABAP Data Types for the following MDM Data Types.
MDM SRM
1. Look up (flat)
2. Look up (taxonomy)
3. Look up (heirarchy)
4. Look up (qualified flat look up)
Any significant inputs on this?
Thanks and regards,
REHi,
Refer the below link. This is from the MDM Reference guide and contains the sample source code as well for almost all the things like creating repository, creating tables and fields etc. It would be helpful to you.
http://help.sap.com/saphelp_mdm550/helpdata/en/47/5fd3f7cbd75518e10000000a421138/frameset.htm
Regards,
Jitesh Talreja -
Error in starting MDM Server from MDM Console
Hi,
I have installed SAP MDM 5.5 SP05 on Windows 2003 Server.
When i try to start the MDM Server (i.e. MDM Service) from the MDM console it gives me the following error:
<i>Error Starting apmdmd(MDM Server): The machine 'apmdmd' is not Windows-based. The MDM server cannot be started from this application; please use CLIX on the machine instead. </i>
But if i start the MDM Service manually and then mount the server, it works fine.
Kindly help.
Regards,
Chintan ShethIt sounds to me like a problem potentially with either the permissions of the Windows user or perhaps a software firewall. The Console uses a low-level Windows API function to determine if the target machine on which MDS is installed is Windows-based. This function may be blocked by some OS or firewall-level setting. This may be the case even if you are able to use the same client machine to connect to the target machine via the Service Control Manager and start MDS from there.
I would like to help with this problem, but I need to know a few more things:
When the problem occurs, is the Console running on the same Windows machine as MDS?
You mentioned Windows 2003 Server... when you run the Console on this machine, are you logged in as an Administrator of the machine? And do you still get the error when you attempt to start MDS from within the Console?
Once MDS is started, and you mount it within the Console, are you having any other problems, such as logging in to a repository, or viewing logs?
Is there a firewall installed on the machine or machines that the software is installed on? We may have to review the settings of the firewall, or try temporarily disabling it (on both ends, or at least on the machine running MDS), to see if the problem goes away -- then we'll know the problem is with the firewall settings.
CLIX is a fine workaround if you can use it, but clearly this problem needs to be rectified.
-cleo -
Can not Upload PDF in MDM data repository
Hi, expert,
when I upload the PDF in MDM data manager, the system error log is :
Unable to open Adobe Acrobat.
See your administrator about installing Adobe Acrobat.
But, when I upload the image, the status is success..
I do not know if it is Adobe Acrobat installing problem or I miss some configuration or it can not upload the PDF into MDM repository..
Your help would be really appreciated.
thanks & Best Regards,Hi,
Can you open the PDF without any error? Is Adobe Acrobat installed on the server where the repository is loaded?
Regards,
jason -
Reg..Not able to transfer items form MDM to SRM(Procurement System)
Hi,
We are implementing SRM5.0 with SRM-MDM2.0.
We have done all the initial level settings in SRM-MDM2.0, and able to add items in shopping cart and view the shopping cart through web, but the moment we click on "Transfer Items" the next screen display the following error message
(404 not found. The request resource doesnt found)
Though we have enter all the details in SRM > Master Data> Define Web Application Server Call Structure area and maintained the Catalog Id in the Org Structure Attributes link too.
But still we are facing the same problem.
Note-: Please help me once we create catalog in MDM how these catalog to be used by SRM users, what are the importent settings/configuration required for the same.
Points will be awarded for the help.
BR,
Vijay MittalHi,
Just try this one ,may be it works.
While defining external webservices ,when u create a new entey u get a tab of technical settings ,check
Use Error Log
Use HTTP GET to call Web service.
then using slg1 transaction just check wat error r u getting then u can act accordingly
Regards
Nisha -
Not able to retrieve and insert the value to Home_country filed in MDM
Hi All,
I am new to the JAVA API,
I have creted one application in webdynpro using the JAVA API. I am able to search the data based on "Firstname" "Lastname" and "Email address".
I need to basically two functionalities
1) Search
2) Insertion of new records
*1) Search*__
But searching based on the Country is not able to do it.
we have two tables .
1) Country table> Contains all the list of the country codes and County name.
2) People table > Contains the country filed. So for this filed lookup table is country. also this country filed is drop down not have opton edit in the MDM.
I am sending the following used for searching the records based on the First Name and country.
But based on the first name it is working fine but Country it is giving some code like "R100" "R12". It is not givng the actual name of the country.
FieldSearchDimension sd1 = new FieldSearchDimension(fields[2].getId());
TextSearchConstraint sc1 = new TextSearchConstraint(First_Name,TextSearchConstraint.EQUALS);
sch.addSearchItem(sd1,sc1);
FieldSearchDimension sd4 = new FieldSearchDimension(fields[9].getId());
TextSearchConstraint sc4 = new TextSearchConstraint(Home_Country,TextSearchConstraint.EQUALS);
// TextSearchConstraint sc4 = new TextSearchConstraint("IN",TextSearchConstraint.EQUALS);
sch.addSearchItem(sd4,sc4);
cmd = new RetrieveLimitedRecordsCommand(connections);
cmd.setResultDefinition(rdPeople);
cmd.setSearch(sch);
cmd.setSession(sessionId);
try
cmd.execute();
catch(CommandException e)
e.printStackTrace();
recs = cmd.getRecords();
wdContext.nodeResult_Table().invalidate();
//retreiving the Data from the resultset
if(recs.getCount()!=0)
for(int i=0;i<recs.getCount();i++)
//First Name
IResult_TableElement resEle=wdContext.nodeResult_Table().createResult_TableElement();
if(!(recs.getRecord(i).getFieldValue(fields[0].getId()).isNull()))
//wdComponentAPI.getMessageManager().reportSuccess("Network Id-->"+recs.getRecord(i).getFieldValue(fields[0].getId()).toString());
resEle.setNetwork_ID(recs.getRecord(i).getFieldValue(fields[0].getId()).toString());
//Country
if(!(recs.getRecord(i).getFieldValue(fields[9].getId()).isNull()))
resEle.setDisplay_Name(recs.getRecord(i).getFieldValue(fields[9].getId()).toString());
wdContext.nodeResult_Table().addElement(i,resEle);
By the above field is not giving the respective country name is avilable. it is giving some value"R100" rather giving of India.
_ 2) For creating the record in the "people" table._
I am able to insert the data all the information "firstname" "Last name", "email" except "Country" entered by the user by using the following code.
//Insert
First_Name=wdContext.currentPersonal_DetailsElement().getAttributeAsText("First_Name");
Last_Name=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Last_Name");
Middle_Name_or_Initial=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Middle_Name_or_Initial");
Home_Country=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Home_Country");
CreateRecordCommand createRecordCommand =new CreateRecordCommand(connections);
Record r1 = RecordFactory.createEmptyRecord(tables[0].getId());
try
// Retrieve Lookup Field Properties, when Field Properties is given as input.
// LookupFieldProperties lookupField = (LookupFieldProperties) fields[9];
//// Retrieve Lookup Field Properties, when Field Properties is given as input.
// LookupFieldProperties lookupFieldSer = (LookupFieldProperties) fieldProp;
// //setting the values for firstname and lastname
r1.setFieldValue(fields[0].getId(),new StringValue(Network_ID));
r1.setFieldValue(fields[2].getId(),new StringValue(First_Name));
r1.setFieldValue(fields[3].getId(),new StringValue(Last_Name));
r1.serFieldValue(FieldValue(fields[9].getId(), new Stringvalue(Home_country));
createRecordCommand.setSession(sessionId);
createRecordCommand.setRecord(r1);
try {
createRecordCommand.execute();
} catch (CommandException e2) {
Let me know what are the changes need to be done for inserting the country information in people table.Hi Greg,
Thanks for the reply,
Actually,I was doing the same thing what you suggested. I am sending the piece of code . Can look it it .Is any thing wrong.
//inserting the Country lookup filed to record object.
* if(Home_Country.length()!=0)*
* /when pass the int position number for the country by retreiving from the country table it is working fine. But we cannot depend on position. Because People table internally refering the other db table while inserting the country filed in the People table./ *
* r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId(12)));*
* //When i PAss the String to the following function i am getting the unsupportedFormat Exception *
* r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId("Australia")));*
InCountry . They have defined only two columns called.
1) ISO-2 Code
2) Country Name.
Sample data
ISO-2 Code | Country Name
US United StatesOf America
AU Australia
Ar Argentina
Like the above data we have 250 country names
So , I displaying all the country list in my interface and holding in the Array.
Ex: When the user chooses the Australia. When I pass directly as an "Australia" to
r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId("Australia"))). it is giving me error.
Then i try to pass the postion of the"Australia" in country table. Like if the Austrila is an 2 record. I am looping through my array and find the record position as "2".
I am passing as
r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId(2)));
It is inserting into the people database. But not an Australia. It is inserting as "Argentina".
When the record inserting in people table refering some table at the database level , that table called "A2i_16_TEXT" This contains three columns.
A2i_16_TEXT(columns)
1) Id
2) LangId
2) Field Id
4) TextField
Example Data
Id | LangId | Textfield
3 0 Australia
2 0 Argentina
4 0 United States Of America
As i am showing the above table for "Argentina" Id is "2". When i pass the 2 for inserting the country filed.Instead of inserting "Australia". It is inserting the "Argentina" by refering this table.
Through MDM API we are not able to access this " A2i_16_TEXT" table. Because it is maintaining at the db level to find the perticular id for the respective country before inserting in to the people table.
So kindly suggest me how to solve this problem. What i am doing in the code is correct or not.
Regards
Vijay -
Error Message in MDM Server Log
Hi Experts,
Can anybody tell me what could be the problems if we have the following scenario ?
For an example: Our MDM Server is based on 5.5 SP06, MDM Server name is DFM and our repository name is MDMQ110.
1) Checking the Reports from this Repository MDMQ110 from MDM Console, no errors and no warning. This repository can be loaded successfully and completed.
2) Server Log has an error in message:
Error: Service 'DFM', Schema 'MDMQ110_m000', ERROR CODE = 0,
SELECT LENGTH(Data) FROM A2i_Misc_Blobs WHERE Id=1000
Thanks very much for your help in advance
Regards,
WDHi Kanstantsin,
Thanks for your reply. I have done the stop and repair but It did not help any. By repair, there are no errors and warnings that have been fixed which I can see in the repository reports.
The Assertion Log has come up first with the messages like:
6426 2010/01/12 09:07:08.500 Error: Data_2 accelerator does not exist in A2i_CM_Accelerator_Status
6426 2010/01/12 09:07:08.683 Error: Data_53 accelerator does not exist in A2i_CM_Accelerator_Status
4884 2010/01/12 09:43:30.335 Error: KeyWord_2_F4_Leng_USA accelerator does not exist in A2i_CM_Accelerator_Status
As soon as I run into MDM, the Server Log has come up the same messages:
It looks like not only happened to this repository. As I can see if I load any other repository, there are the same messages in Server Log but only the repository name in the message is different. -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
Hi,
I am on the way of integrating ABAP API in PI 7.1 EHP 1 with MDM 7.1
I installed MDM ABAP API in PI system.
In transaction MDMAPIC, created MDM Server Connection with default port, DBMS Hosts and MDM Repository.
After I did the above tasks, I tested the RFC Connection, But its failed with the following error.
Connection Test MDM_API_GEN_DEFIANCEDEP
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details ERROR: program DEFIANCEDEP.MDS not registered
Error Details LOCATION: SAP-Gateway on host DEFIANCEDPI / sapgw00
Error Details DETAIL: TP DEFIANCEDEP.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 87
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1714
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 711
Error Details TIME: Sat Mar 12 13:53:55 2011
Error Details VERSION: 2
Appreciated if replied with the proper resolution at the earliest.
Thanks in Advance
Pradeep ShettyHi Kanstantsin Chernichenka,
Thanks for your reply.
I tried the given suggestion. And even restarted the PI and MDM system.
Still, I am facing the same problem.
My allow.ip file contains
122.183.187.24;
122.183.187.25;
115.242.211.112;
115.184.2.47;
My MDS.ini file contents are
[MDM Server]
XCS Ini Version=1
Accelerator Dir=E:\usr\sap\MDM\MDS02\mdm\accelerators
Log Dir=E:\usr\sap\MDM\MDS02\log
Report Dir=E:\usr\sap\MDM\MDS02\mdm\reports
Archive Dir=E:\usr\sap\MDM\MDS02\mdm\archives
Distribution Root Dir=E:\usr\sap\MDM\MDS02\mdm\distributions
Transport Dir=E:\usr\sap\MDM\MDS02\mdm\transport
Modifications Dir=E:\usr\sap\MDM\MDS02\mdm\modifications
Lexicon Dir=E:\usr\sap\MDM\MDS02\exe\Lexicons\
Extra DBConnection Validation=True
Log SQL Errors=True
String Resource Dir=E:\usr\sap\MDM\MDS02\exe\LangStrings\
Stemmer Install Dir=E:\usr\sap\MDM\MDS02\exe
Wily Instrumentation=False
Wily Instrumentation Level Threshold=10
SLD Registration=True
Skip Unchanged Records=False
Autostart=0
MDS Ini Version=1
RELEASE\UseAssert=True
Tracing Level=3
LogViewer Format Logging=False
LogViewer Format Tracing=False
Trusted SAP Systems=DPI
TrustFiles Dir=E:\usr\sap\MDM\MDS02\config
Max Threads Per Operation=Auto
Lock Account After Failed Password Attempts=5
Lock Account Duration=1800
Minimal Password Length=5
Password Expiration Days=90
Password Expiration Warning=7
Disable Read Access To Corrupt Repositories=False
MDS Scone=
Log SQL Modifications=False
Maximum DBMS Bind Count=512
Oracle\Dll=OCI.DLL
Allow Console to Retrieve Files=True
Oracle Tablespace Files=1
Default Interface Language Code=eng
Default Interface Country Code=US
Client Ping Timeout Minutes=0
Inactive Client Timeout Minutes=30
Value Retrieval Threshold=0
Protect Family Nodes With Locked Data=False
Number Of Stemmers Per Language=2
TrexDllPath=
Import Slice Size=2048
Bulk Import Silo=True
Safe Silo Mode=False
Enable Change Stamp Logging=False
Always Verify DBMS Connection Before Executing SQL Statements=False
Disable Read Access To Repositories That Require Restart=False
Family Retrieval Threshold=30000
Enable Client Dictionaries=False
Restricted Url For Client Export=
Index_Page_Margin=10
Default Slice Size=500
Default Slice Wait Time MS=300
Enable Slicing For Non-Bulk Operations=False
Multithreaded Matching=True
SAP RFC Gateways=
[MDM Server\Databases\MDM_1MDMORCL_5_3_4_3]
Port=2345
Login=SYSTEM
Password+=ES066H2NVHDCFSJ206LJ9I995SLBVSA21OMQPM0
Stemmer Language=
Stemmer Variant=
Valid Keyword Chars=abcdefghijklmnopqrstuvwxyz0123456789
Max Large Text Length=250000
Number of Rows Per Fetch=100
Max Initial MB to Retain=4
Max Send Failure MB to Retain=4
Workflow Detailed Report=False
Mail Server=
Mail SMTP Timeout=1
Here I am requesting you to send your valuable feedback at the earliest.
Thanks
Pradeep Shetty -
KM Scheduler job with MDM APIs
Hi,
I am trying to write a background job that makes use of MDM APIs. I created a Portal Application Project and put in the required code. I added the required MDM jar fiels in to the java build path. How ever, I don't know how to add Library Reference with value "com.sap.mdm.tech.mdm4j" since this is not a Webdynpro project. Without this the KM Scheduler fails to run the job thowing an exception ''NoClassDefFoundError...".
Can any one tell me how do I go about?
Thanks,
SudheerTrying to post the question under different category
Maybe you are looking for
-
How do you tell if it's G or N?
I have two Airport Expresses here at work, and I can't tell if they're G or N. I've looked all through the control panels for each in the Airport Utility, to no avail.
-
Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0 Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser add
-
I texted my daughter with using some new flesh colored emoji's and she not only got my new "clapping hands" but a tiny alien face also appeared. Has anyone reported this bug to Apple. I don't know how to do it
-
Can I run logmnr without setting SUPPLEMENTAL_LOG_DATA_MIN ??
Question is can I run logmnr without setting SUPPLEMENTAL_LOG_DATA_MIN ?? I had a situation where I had to run log miner to undo some changes. I ran the log miner on the database where SUPPLEMENTAL_LOG_DATA_MIN was not set nor the dictionary was spec
-
When Exporting PDF to Excel using Pro XI not all content converts.
The first portion of the PDF is not included and only the first page of several pages converts. Is this a trial limitation or a something I'm doing wrong? thx