Mdm to  r3  probs

hi
iam doing one senario
that is
mdm to r3
and r3 to mdm
syncronus communication
the problem is  when we create metirial in the r3 system through idocs
after creating metirial
also we need to send the detailS back to the r 3 system
WITH metiral number.
how can i do this
one of my friend is saying it is pasible through aleaudit.
what is this ?
can any body help me pls.
pls help me
its arzent man .
with regards
srikanth vipparla

Hi,
Yes its possible to use ALEAUDIT as receiver acknowledgment for the IDOCs
The Aleduit will contain the Idoc number against the Docnum field.
This is possible, but how will you send the Idoc Ack back to XI?
1. Either send the Aleaudit using te RBDSATE report.
2,. Or write a Exit in the Idoc processing code.
ALE audit is only possible for IDocs of type logical system (LS).
So no need to do any configuration for acknolwledgment. Unless if you have the receiver is also R3 receive Idoc.
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
IDX_NOALE.
You use this function to define for a particular sender port and client which acknowledgments are requested from the sender
see below link
http://help.sap.com/saphelp_nw04/helpdata/en/44/932e8896b610bbe10000000a422035/content.htm
Thanks
Swarup
Edited by: Swarup Sawant on Apr 4, 2008 8:21 AM

Similar Messages

  • Recalculate the Price in SRM once the item is transfer to SRM from SRM MDM

    Hi Experts,
    I am technical person and am facing one issue,we are using MDM catalog for selecting the product and after selection the product is getting transfer to the SRM.
    In SRM we have Quantity field available which is editable(we don't want to make it read only field),everything works fine if no one is changing the Quantity field which is coming from SRM MDM.
    But when a requester is changing the quantity field of the product in SRM then the total price is not getting change accordingly in SRM.is there any way to fetch the price field again from SRM MDM once it is transferred to the SRM.
    I know that before transferring the field to SRM if we change the quantity field there there is "RECALCULATE" button availabe to change the total price but after transferring the item whats is the procedure to change the Price if quantity is changed in SRM.
    Note that Price field depends on the Quantity field in SRM MDM and it is maintained in MDM but not in SRM.
    Please Help me friends.

    Hi ,
    I just want to clarify that after the product  toSRM it will check data from their price data maintained in SRM.
    For yr problem just try these things and get back with yr results
    1. whatever quantity you are putting in SRM ,try with same quantity in mdm catalog and check what price is coming
         If that is same then not a prob because may bbe  for that product multiple price maintained for different quantity
        otherwise for sure SRM are fetching the price from their  storage.
    2. Instead of add an item from catalog  add same item from srm using the  product id ,supplier part number and other information
         may be  at srm level they maintain different condition on item level.
    Please try at yr end and get back with yr result.
    (for validation of price from mdm there is a setting spro that when checked do validate the price from mdm catalog when ypu copy yr product in srm)
    Thanks,
    Sudhanshu

  • Mdm to xi settings

    hai friends
    iam creating mdm to xi scenario in that i have one probs.
    iam not under standing
    which type of bussiness system,technical system  i have to take
    i am think ing that third party object
    but how to configure the mdm in xi  that
    and any setting in mdm system and connect to out bound folder  and reding the data .
    i need to import sxd file from mdm system .
    pls can any body help me pls
    thanks
    srikanth vipparla

    Hi,
        Go through the following blogs.
        /people/harrison.holland5/blog/2006/11/27/mdm-syndication
        /people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
       I hope that you would get idea on MDM to XI settings.
       Please reward points , if those are helpful to you.
    Thanks,
    Narendra.M

  • Archiving of Java component and SAP MDM

    Hi,
    For ABAP components it's quite easy to archive data or manage documents through BC-AL and BC-HS interface.
    Does there is the same type of interface for java components (PI or EP for example) and for SAP MDM.
    What I wantt to do is data archivng with probant value by using Opentext LEA or Documentum for example
    Thanks in advance,
    Thomas

    Hi Sri,
    There are many possibilities in XI for your scenario.
    1. You can post an http request from your java application to SAP XI. In that case you need an HTTP Adapter and an RFC Adapter in XI.
    2. You can generate a file from your java application which will be picked up by SAP XI using FILE Adapter and using RFC or IDoc adapter you can post the data into R/3.
    3. Optionally you can try with webservice from your java application so that using XI SOAP adapter you can get the data from Java application.
    and the options are still more....
    Thanks,
    Sasi

  • My apps dance open and close on their own in my IPad 2 what can be the prob? I have already restored

    I got the charger flex or pin changed and now the apps dance on the screen, photos open and zoom in, then out, the other apps open and close. I have already restored the device with Itunes and prob is still there. What can be the problem? Any suggestion will be welcome. Thank you

    THANKS for your prompt reply  Bluetooth is off in my laptop and IPhone.. and in fact the reset is the only thing that can make it back to normal. But for a lil while. I wonder if it is the touch, or the home botton... both things are very expensive to replace, so I wouldn't like to spend $$ and continue having the prob.....

  • Error while opening MDM Data Manager

    Hi,
    We are getting the following error while trying to open Data manager on our repository.
    "Error Initializing Attributes for table Taxonomy
    Application will exit
    Already exists"
    mds Version 5.5.42.90
    MDM DataManager Ver5.5.42.90
    The repository loads without any errors. The server log file too doesnt show any errors.
    Is there anyway to fix this?

    Go to your MDM console, Login to repository and Unload repository first.
    Then load with Update Indices.
    This problem comes when you change anything in schema in console and then load repository with immediate option.
    So always prefer to use update indices as accelator files will get updated and data comes from actual database.
    If the problem still persists then Go again to console and check your repository for any fatal error. if errors come then repair repository and if not come then also repair.
    Then load with update indices.
    Hope it will help you.
    BR,
    Alok
    Edited by: Alok Sharma on Feb 14, 2008 9:20 AM

  • What are the corresponding Data Types of some MDM Data Types

    Hi Guys,
    The MDM ABAP API involves creation of a DDIC structure in SRM. This structure should have the same fields with the MDM table fields. We would like to ask the corresponding ABAP Data Types for the following MDM Data Types.
         MDM                                                         SRM
    1.  Look up (flat)
    2.  Look up (taxonomy)
    3.  Look up (heirarchy)
    4.  Look up (qualified flat look up)
    Any significant inputs on this?
    Thanks and regards,
    RE

    Hi,
    Refer the below link. This is from the MDM Reference guide and contains the sample source code as well for almost all the things like creating repository, creating tables and fields etc. It would be helpful to you.
    http://help.sap.com/saphelp_mdm550/helpdata/en/47/5fd3f7cbd75518e10000000a421138/frameset.htm
    Regards,
    Jitesh Talreja

  • Prob in decode function

    hi iam having prob with the following decode function
    declare
    c varchar2(20);
    begin
    select decode(deptno,
         10, 'accounting',
         20,'Research',
         30 ,'sales',
         40,'operations','UNKNOWN') into c from dept where loc='DALLAS';
    dbms_output.put_line('DEPARTMENT in DALLAS'||c);
    select decode(deptno,
         10, 'accounting',
         20,'Research',
         30 ,'sales',
         40,'operations','UNKNOWN') into c from dept where loc='INDIA';
    dbms_output.put_line('DEPARTMENT IN INDIA'||c);
    end;
    iam getting no_data_found exception which is reasonable..but what happened to 'unknown' clause in decode function.
    thank u
    rajiv

    DECODE only works on rows returned from the database. If there are no rows, DECODE has nothing to work on.
    Consider:
    SQL> SELECT DECODE(dummy, 'X', 'Found a row', 'No row')
      2  FROM dual;
    DECODE(DUMM
    Found a row
    SQL> SELECT DECODE(dummy, 'X', 'Found a row', 'No row')
      2  FROM dual
      3  WHERE 1=2;
    no rows selectedIf you want to have c contain UNKNOWN when there are no rows returned, you need to do something more like:
    DECLARE
    c VARCHAR2(20);
    BEGIN
       BEGIN
          SELECT DECODE(deptno, 10, 'accounting',
                                20,'Research',
                                30 ,'sales',
                                40,'operations','UNKNOWN')
          INTO c
          FROM dept
          WHERE loc='DALLAS';
       EXCEPTION
          c := 'UNKNOWN';
       END;
       DBMS_OUTPUT.Put_Line('DEPARTMENT in DALLAS'||c);
       BEGIN
          SELECT DECODE(deptno, 10, 'accounting',
                                20,'Research',
                                30 ,'sales',
                                40,'operations','UNKNOWN')
          INTO c
          FROM dept
          WHERE loc='INDIA';
       EXCEPTION
          c := 'UNKNOWN';
       END;
       DBMS_OUTPUT.Put_Line('DEPARTMENT IN INDIA'||c);
    END;HTH
    John

  • ISE 1.2 - Multiple NICs/Load Balancing for DHCP Probe

    Hello guys
    Just prepping an ISE 1.2 patch 8 setup in our organization. I am going for the virtual appliances with multiple NICs. It will be a distributed deployment with 4 x PSNs behind a load balancer and there is no requirement for wireless or guest user at the moment. I've got 2 points I will like to get some guidance on:
    Our DC has a dedicated mgmt network and I plan to IP the gig0 interface of the PANs, MNTs and PSNs from this subnet. All device admin, clustering, config replication, etc will be over this interface. However, RADIUS/probe/other user traffic to the ISE PSNs will be over the gig1 interface which will be addressed from another L3 network. Is this a supported configuration in ISE?
    I intend to use the DHCP probe as part of device profiling and will ideally like to have just an additional ip helper to add to our switch SVI config. Also, it will appear that WLCs can only be configured for 2 DHCP servers for a given network so another consideration for when we bringing our WLAN in scope. We however use ACE load balancers within our DC and from what I have read, they do not support DHCP load balancing. Are there any workarounds to using the DHCP probe with multiple PSNs without having to add each node as an ip helper/DHCP server on the NADs?
    Thanks in advance
    Sayre

    Hello Sayre-
    For Question #1:
    Management is restricted to GigabitEthernet 0 and that cannot be changed so you should be good there
    You can configure Radius and Profiling to be enabled on other interfaces
    Even though you are not using guest services yet, you can dedicate an interface just for that. As a result, you can separate guest traffic completely from your production network
    Take a look at this link for more info:
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_c-ports.html
    For Question #2
    If you are using a Cisco WLC and running code 7.4 and newer you don't need to mess with the IP helper configurations. 
    The controller can be configured to act as a collector for client profiling and interact with the DHCP thread along with the RADIUS accounting task that is running on the controller. The controller receives a copy of the DHCP request packet sent from the DHCP thread and parses the DHCP packet for two options:
    –Option 12—HostName of the client
    –Option 60—The Vendor Class Identifier
    After this information is gathered from the DHCP_REQUEST packet, a message is formed by the controller with these option fields and is sent to the RADIUS accounting thread, which is in turn transmitted to the ISE in the form of an interim accounting message.
    Both DHCP and HTTP profiling settings are located under the "Advanced" configuration tab in the WLC
    On the other hand, you can also use Anycast for profiling. You can check out some of Cisco Live's sessions for more info on that. Here is one that is from a couple of years (There are more recent ones that are available as well):
    http://www.alcatron.net/Cisco%20Live%202013%20Melbourne/Cisco%20Live%20Content/Security/BRKSEC-3040%20%20Advanced%20ISE%20and%20Secure%20Access%20Deployment.pdf
    I hope this helps!
    Thank you for rating helpful posts!

  • Error in starting MDM Server from MDM Console

    Hi,
    I have installed SAP MDM 5.5 SP05 on Windows 2003 Server.
    When i try to start the MDM Server (i.e. MDM Service) from the MDM console it gives me the following error:
    <i>Error Starting apmdmd(MDM Server): The machine 'apmdmd' is not Windows-based. The MDM server cannot be started from this application; please use CLIX on the machine instead. </i>
    But if i start the MDM Service manually and then mount the server, it works fine.
    Kindly help.
    Regards,
    Chintan Sheth

    It sounds to me like a problem potentially with either the permissions of the Windows user or perhaps a software firewall. The Console uses a low-level Windows API function to determine if the target machine on which MDS is installed is Windows-based. This function may be blocked by some OS or firewall-level setting. This may be the case even if you are able to use the same client machine to connect to the target machine via the Service Control Manager and start MDS from there.
    I would like to help with this problem, but I need to know a few more things:
    When the problem occurs, is the Console running on the same Windows machine as MDS?
    You mentioned Windows 2003 Server... when you run the Console on this machine, are you logged in as an Administrator of the machine? And do you still get the error when you attempt to start MDS from within the Console?
    Once MDS is started, and you mount it within the Console, are you having any other problems, such as logging in to a repository, or viewing logs?
    Is there a firewall installed on the machine or machines that the software is installed on? We may have to review the settings of the firewall, or try temporarily disabling it (on both ends, or at least on the machine running MDS), to see if the problem goes away -- then we'll know the problem is with the firewall settings.
    CLIX is a fine workaround if you can use it, but clearly this problem needs to be rectified.
    -cleo

  • Can not Upload PDF in MDM data repository

    Hi, expert,
    when I upload the PDF in MDM data manager, the system error log is :
    Unable to open Adobe Acrobat.
    See your administrator about installing Adobe Acrobat.
    But, when I upload the image, the status is success..
    I do not know if it is Adobe Acrobat installing problem or I miss some configuration or it can not upload the PDF into MDM repository..
    Your help would be really appreciated.
    thanks & Best Regards,

    Hi,
    Can you open the PDF without any error? Is Adobe Acrobat installed on the server where the repository is loaded?
    Regards,
    jason

  • Reg..Not able to transfer items form MDM to SRM(Procurement System)

    Hi,
    We are implementing SRM5.0 with SRM-MDM2.0.
    We have done all the initial level settings in SRM-MDM2.0, and able to add items in shopping cart and view the shopping cart through web, but the moment we click on "Transfer Items" the next screen display the following error message
    (404 not found. The request resource doesnt found)
    Though we have enter all the details in SRM > Master Data> Define Web Application Server Call Structure area and maintained the Catalog Id in the Org Structure Attributes link too.
    But still we are facing the same problem.
    Note-: Please help me once we create catalog in MDM how these catalog to be used by SRM users, what are the importent settings/configuration required for the same.
    Points will be awarded for the help.
    BR,
    Vijay Mittal

    Hi,
    Just try this one ,may be it works.
    While defining external webservices ,when u create a new entey u get a tab of technical settings ,check
    Use Error Log
    Use HTTP GET to call Web service.
    then using slg1 transaction just check wat error r u getting then u can act accordingly
    Regards
    Nisha

  • Not able to retrieve and insert the value to Home_country filed in MDM

    Hi All,
    I am new to the JAVA API,
    I have creted one application in webdynpro using the JAVA API. I am able to search the data based on "Firstname" "Lastname" and "Email address".
    I need to basically two functionalities
    1) Search
    2) Insertion of new records
    *1) Search*__
    But searching based on the Country is not able to do it.
    we have two tables .
    1) Country table> Contains all the list of the country codes and County name.
    2) People table > Contains the country filed. So for this filed lookup table is country. also this country filed is drop down  not have opton edit in the MDM.
    I am sending the following used for searching the records based on the First Name and country.
    But based on the first name it is working fine but Country it is giving some code like "R100" "R12". It is not givng the actual name of the country.
    FieldSearchDimension sd1 = new FieldSearchDimension(fields[2].getId());
                   TextSearchConstraint sc1 = new TextSearchConstraint(First_Name,TextSearchConstraint.EQUALS);
                   sch.addSearchItem(sd1,sc1);          
    FieldSearchDimension sd4 = new FieldSearchDimension(fields[9].getId());
                   TextSearchConstraint sc4 = new TextSearchConstraint(Home_Country,TextSearchConstraint.EQUALS);
    //               TextSearchConstraint sc4 = new TextSearchConstraint("IN",TextSearchConstraint.EQUALS);
                   sch.addSearchItem(sd4,sc4);
    cmd = new RetrieveLimitedRecordsCommand(connections);
                   cmd.setResultDefinition(rdPeople);
                   cmd.setSearch(sch);
                   cmd.setSession(sessionId);
    try
                        cmd.execute();
                        catch(CommandException e)
                             e.printStackTrace();
                        recs = cmd.getRecords();
                        wdContext.nodeResult_Table().invalidate();
    //retreiving the Data from the resultset
    if(recs.getCount()!=0)
      for(int i=0;i<recs.getCount();i++)
           //First Name
         IResult_TableElement resEle=wdContext.nodeResult_Table().createResult_TableElement();
         if(!(recs.getRecord(i).getFieldValue(fields[0].getId()).isNull()))
         //wdComponentAPI.getMessageManager().reportSuccess("Network Id-->"+recs.getRecord(i).getFieldValue(fields[0].getId()).toString());
         resEle.setNetwork_ID(recs.getRecord(i).getFieldValue(fields[0].getId()).toString());
           //Country
          if(!(recs.getRecord(i).getFieldValue(fields[9].getId()).isNull()))
         resEle.setDisplay_Name(recs.getRecord(i).getFieldValue(fields[9].getId()).toString());
         wdContext.nodeResult_Table().addElement(i,resEle);
    By the above field is not giving the respective country name is avilable. it is giving some value"R100" rather giving of India.
    _ 2)  For creating the record in the  "people" table._
    I am able to insert the data all the information "firstname" "Last name", "email" except "Country" entered by the user by using the following code.
    //Insert
    First_Name=wdContext.currentPersonal_DetailsElement().getAttributeAsText("First_Name");
         Last_Name=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Last_Name");
         Middle_Name_or_Initial=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Middle_Name_or_Initial");
         Home_Country=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Home_Country");
    CreateRecordCommand createRecordCommand =new CreateRecordCommand(connections);
         Record r1 = RecordFactory.createEmptyRecord(tables[0].getId());     
         try
    //               Retrieve Lookup Field Properties, when Field Properties is given as input.
    //           LookupFieldProperties lookupField = (LookupFieldProperties) fields[9];          
    ////     Retrieve Lookup Field Properties, when Field Properties is given as input.
    //           LookupFieldProperties lookupFieldSer = (LookupFieldProperties) fieldProp;
    //          //setting the values for firstname and lastname
            r1.setFieldValue(fields[0].getId(),new StringValue(Network_ID));
            r1.setFieldValue(fields[2].getId(),new StringValue(First_Name));
            r1.setFieldValue(fields[3].getId(),new StringValue(Last_Name));
    r1.serFieldValue(FieldValue(fields[9].getId(), new Stringvalue(Home_country));
            createRecordCommand.setSession(sessionId);
            createRecordCommand.setRecord(r1);
         try {
              createRecordCommand.execute();
          } catch (CommandException e2) {
    Let me know what are the changes need to be done for inserting the country information in people table.

    Hi Greg,
    Thanks for the reply,
    Actually,I  was doing the same thing what  you suggested. I am sending the piece of code . Can look it it .Is any thing wrong.
              //inserting the Country lookup filed to record object.
    *       if(Home_Country.length()!=0)*
    *     /when pass the int position number for the country by retreiving from the country table it is working fine. But we      cannot depend on position. Because People table internally refering the other db table while inserting the country      filed in the People table./     *
    *          r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId(12)));*
    *     //When i PAss the String to the following function i am getting the unsupportedFormat Exception          *
    *          r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId("Australia")));*
    InCountry . They have defined only two columns called.
    1) ISO-2 Code
    2) Country Name.
    Sample data
    ISO-2 Code  |   Country Name
    US                    United StatesOf America
    AU                    Australia
    Ar                     Argentina
    Like the above data we have 250 country names
    So , I displaying all the country list in my interface and holding in the Array.
    Ex: When the user chooses the Australia.  When I pass directly as an "Australia" to
    r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId("Australia"))).  it is giving me error.
    Then i try to pass the postion of the"Australia" in country table. Like if the Austrila is an 2 record. I am looping through my array and find the record position as "2".
    I am passing as
    r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId(2)));
    It is inserting into the people database. But not an Australia. It is inserting as "Argentina".
    When the record inserting in people table refering some table at the database level , that table called "A2i_16_TEXT" This contains three columns.
    A2i_16_TEXT(columns)
    1) Id
    2) LangId
    2) Field Id
    4) TextField
    Example Data
    Id  |  LangId  |  Textfield
    3       0            Australia
    2       0            Argentina
    4       0            United States Of America
    As i am showing the above table for "Argentina" Id is "2". When i pass the 2 for inserting the country filed.Instead of inserting "Australia". It is inserting the "Argentina" by refering this table.
    Through MDM API we are not able to access this " A2i_16_TEXT"  table. Because it is maintaining at the db level to find the perticular id for the respective country before inserting in to the people table.
    So kindly suggest me how to solve this problem. What i am doing in the code is correct or not.
    Regards
    Vijay

  • Error Message in MDM Server Log

    Hi Experts,
    Can anybody tell me what could be the problems if we have the following scenario ?
    For an example: Our MDM Server is based on 5.5 SP06, MDM Server name is DFM and our repository name is MDMQ110.
    1) Checking the Reports from this Repository MDMQ110 from MDM Console, no errors and no warning. This repository can be loaded successfully and completed.
    2) Server Log has an error in message:
    Error: Service 'DFM', Schema 'MDMQ110_m000', ERROR CODE = 0,
    SELECT LENGTH(Data) FROM A2i_Misc_Blobs WHERE Id=1000
    Thanks very much for your help in advance
    Regards,
    WD

    Hi Kanstantsin,
    Thanks for your reply. I have done the stop and repair but It did not help any. By repair, there are no errors and warnings that have been fixed which I can see in the repository reports.
    The Assertion Log has come up first with the messages like:
    6426            2010/01/12 09:07:08.500               Error: Data_2 accelerator does not exist in A2i_CM_Accelerator_Status
    6426            2010/01/12 09:07:08.683               Error: Data_53 accelerator does not exist in A2i_CM_Accelerator_Status
    4884 2010/01/12 09:43:30.335   Error: KeyWord_2_F4_Leng_USA accelerator does not exist in A2i_CM_Accelerator_Status
    As soon as I run into MDM, the Server Log has come up the same messages:
    It looks like not only happened to this repository. As I can see if I load any other repository, there are the same messages in Server Log but only the repository name in the message is different.

  • Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn

    Hello All,
    While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
    Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
    our server OS : windows 2008 server
    We are getting error while doing connection test in SRM.
    This is sm59 connection (TCP/IP ) connection.
    Connection Type: T / RFC destination Name: MDM_API_CATALOG
    Registered server program: hostname.MDS
    I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
    I Checked this MDM setup also.
    MDS setup
    In mdm server go to folder F:\usr\sap\DM1\MDS00\config
    Open MDM.ini file in notepad
    Add the below 2 entries.
    SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
    Trusted SAP Systems= XXD
    This will enable gateway connection between SRM and MDM and will enable trusted connection.
    For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM  and also created the same user in MDM with Default role.
    Error message:
    Logon  Connection Error
    Error Details    Error when opening an RFC connection
    Error Details    ERROR: program XXXXXXXXPRD.MDS not registered
    Error Details    LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
    Error Details    DETAIL: TP XXXXXXXXPRD.MDS not registered
    Error Details    COMPONENT: SAP-Gateway
    Error Details    COUNTER: 77326
    Error Details    MODULE: gwr3cpic.c
    Error Details    LINE: 1778
    Error Details    RETURN CODE: 679
    Error Details    SUBRC: 0
    Error Details    RELEASE: 700
    Error Details    TIME:
    Error Details    VERSION: 2
    Procedure Tried
    1)  This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
    To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
    rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
    rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
    The connection will fail once this command is terminated or the user executing this command logs off
    2)
    To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
    To do this, execute the following command
    sudo su u2013 <sid>adm
    rfcexec u2013D<destination name>
    <destination name> is the RFC destination name in SM59
    In order to do above step 2,  we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
    3) Already checked the notes sapnote_0000684841
    I know that it is generic error..This is happening to specific one of system only.
    Thanks
    Edited by: saptest2011 on May 20, 2011 5:36 PM

    Hello SM,
    Thanks for your quick reply.
    Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
    But still issue remain there.
    The same RFC connection works between SRM sandbox to MDM sandbox.
    Only issue with SRM Prod to MDM Prod (newly built system)
    difference between MDM Prod and MDM sandbox.
    MDM Prod runs: Windows server 2008 OS
    MDM Sandbox runs: Windows server 2003 OS
    Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
    Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
    Thanks a lot for your help.
    I checked these notes also
    Note 353597 - Registering a server program
    Note 44844 - No connection to registered RFC program
    Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
    Thanks
    Edited by: saptest2011 on May 23, 2011 5:00 PM
    Edited by: saptest2011 on May 23, 2011 5:39 PM

Maybe you are looking for