MDM Webdynpro Component

Hi All,
Iam using MDM Webdynpro Component. How can i achieve duplicate check in this? When a new record is created using the item details iview i want the material number to be unique.
Can you please suggest how to go about it
Regards
Suresh

Suresh -
I am not sure about the typical way. but in your MDM Configurator screen you can embedd your MDM validation (provided you have made a validation for a duplicate check in MDM).
on the top of it if you want to put a custom validation out of MDM box , then there must be a custom user exit for duplicate check in Web dynpro component screen , so for that you can code it there.
later both MDM configurator and WD component code can be embedd and one validate button can be put on screen so before entering any material/customer/vendor into the system it will run those validations and provide a duplicate check.
it's always better to have a validate button in your main screen before entering any new material/customer/vendor.
HTH
thx
Deep

Similar Messages

  • Sorting in Resultset view of MDM Webdynpro component

    Hi
    is sorting functionality can be configured in Result set table columns by using MDM web dynpro configuration manger?
    Thanks in advance.
    Ravindra Singh

    found out the solution

  • MDM Search Webdynpro Component

    We have MDM 7.1 SP04 installed. I am using MDM Webdynpro components for MDM 7.1 SP04 running on CE 7.1 EHP1 SP04.  I configured the search component in Webdynpro configurator. My requirement is to pull only active items from MDM for any type of searchs. User doesn't want to see the search option on screen to choose active.
    There are no options on configurator to hide the search fields or to set the default value for searchs.
    I thought I can add custom logic in the custom wrapper Webdynpro for search. I added search webdynpro component as used dc in wrapper and pointed to the configuration I did in webdynpro configurator.
    Now if I thought I could add my own search parameters in the wrapper. But the interface controller of Search component delivered by SAP has not exposed the search object to add my own parameters.
    I am left with doing full custom development for Search.
    I am wondering did I miss anything or is there any other way to extend search component delivered by SAP to add my own search logic instead of going with custom development.
    Thanks

    Mukesh,
    we have a similar requirement.
    can you please send the solution
    Thanks
    Bala Duvvuri

  • How to preview standard MDM Webdynpro Components ?

    Hi
    As we know, we can create standard MDM Webdynpro components from CE 7.1 SP 04 onwards.
    Suppose I have created a project using MDM WD configurator and added a search component, a resultset component and an itemdetails component. We can preview the individual components using the preview button provided in the configurator. But in order to see the consolidated project containing all the 3 components, we need to embed them as used components in a custom WD component. Then through the custom WD component we can preview the 3 standard components.
    My question is, is there any way in which we an preview all the 3 standard MDM WD components together without putting them in a custom WD component ?
    Is there a way we can directly assign an iview to a project created with MDM WD configurator ?
    Thanks
    Sayan Ghosh

    Found the sloution. Can be launched in the browser with the following url giving the component details :
    http://<hostName>:<portNumber>/webdynpro/dispatcher/sap.com/tcmdmwdcompsmasterwd/MASTER?proj=<Project_Name>&rs=<ResultSet_Name>&s=<Search_Name>id=<ItemDetails_Name>

  • Change Tracking Webdynpro Component Error

    I am using CE 7.11 SP04 with MDM 7.1 SP04.
    Installed all the 2 webdynpro components.
    Configured change tracking on MDM, also configured change tracking iView on CE.
    Issue1:
    When I run change tracking as an iView through Portal , the logoff button on change tracking iView throughs null pointer exception.
    Issue2:
    I am consuming the change tracking webdynpro component on my custom webdynpro wrapper.
    I have added the following code to pass the id and lookup table as per the how tto guide to consume MDM webdynpro's.
    RepositorySchemaEx schema = MetadataManager.getInstance().getRepositorySchema(wdContext.currentContextElement().getUserSessionContext());
    GetPermanentIdFromRecordIdCommand cmd = new GetPermanentIdFromRecordIdCommand(
    wdContext.currentContextElement().getUserSessionContext());
    TableId tableId = schema.getTableId(ASSIGNMENT);
    cmd.setRecordIds(ids);
    cmd.setTableId(tableId);
    cmd.execute();
    int[] permIds = cmd.getPermanentIds();
    if (permIds != null && permIds.length > 0) {
    int permId = permIds[0];
    wdThis.wdGetMDMChangeTrackerInterface().setPermanentId(permId); // until here it works fine
    wdThis.wdGetMDMChangeTrackerInterface().selectLookupTable(""+tableId.getIdValue()); // it throws null pointer exception here in SAP delivered change tracking component. Not sure whether it is SAP bug. Has anyone faced same issue?
    Any help is appreciated!}
    Here is the error
    java.lang.NullPointerException: while trying to invoke the method com.sap.mdm.ChangeTrackingBean.setLookupTableId(int) of an object loaded from field com.sap.mdm.MdmChangeTrackerComp._tracker of an object loaded from local variable 'this'
        at com.sap.mdm.MdmChangeTrackerComp.selectLookupTable(MdmChangeTrackerComp.java:812)
        at com.sap.mdm.wdp.InternalMdmChangeTrackerComp.selectLookupTable(InternalMdmChangeTrackerComp.java:333)
        at com.sap.mdm.MdmChangeTrackerCompInterface.selectLookupTable(MdmChangeTrackerCompInterface.java:140)
        at com.sap.mdm.wdp.InternalMdmChangeTrackerCompInterface.wdInvokeMethod(InternalMdmChangeTrackerCompInterface.java:148)
        at com.sap.tc.webdynpro.progmodel.generation.ExternalControllerPI$ExternalInterfaceInvocationHandler.invoke(ExternalControllerPI.java:339)
    Thanks

    JDBC Alias should be provided as the Application Parameter for webdynpro not in the URL.

  • Is there MDM Webdynpro ABAP standards components?

    Are there standard MDM Webdynpro ABAP standard components available.
    We are planning to integrate MDM Webdynpro ABAP component with BPM.

    Hi George,
    I think there are no MDM Webdynpro ABAP standard components available. But I think it is a good idea to go with MDM Web Dynpro Java Components, as BPM is java based just as the other tools in the Composition Environment and fully compatible with Java. There are many articles and documents available online.
    This link maybe helpful for BPM and Web Dynpro for Java Integration
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b06c49b2-ac63-2c10-3d8d-d17b817ba4ca?QuickLink=index&overridelayout=true
    Regards
    Goutham Kanithi

  • IE Script error when double clicking on a view in Abap Webdynpro component

    Hello experts,
    I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
    I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
    <b>Internet Explorer Script Error</b>
    An error has occured in the script on this page.
    Line: 1
    Char: 1
    Error: 'wdp_show_menu' is undefined
    Code: 0
    URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
    Do you want to continue running scripts on this page?
    Thanks in advance.
    Bhupendra

    Hi Bhupendra,
       If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
    Thanks
    Anzy

  • Webdynpro component in new tab.

    Hi Experts,
    I am tring to add a new tab in the struture level of a Project .
    I successfully added a new tab and created a webdynpro component for the Tab as well .
    However, when i see in the application , the tab does not show the created component. When right click and check the detail, it still shows the component DPR_MAINFRAME / DPR_PROJECTS_STRUCTUR . Kndly advice.
    Thanks,
    Siva.

    Hi
    Use this table  DPR_CUST_TABC to register your component to WD framework.
    Regards
    Praveen

  • How to add a new url link in a view of an existing webdynpro component?

    How to add a new url link in a view of an existing webdynpro component?

    hi ,
    refer SAP online hep :
    Implementing Enhancements in a View
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/233f2189f74f08e10000000a114a6b/frameset.htm
    To enhance the layout of the view, you can create new UI elements. This procedure is no different u2013 from a technical viewpoint u2013 from creating UI elements in components themselves. All UI elements created within the enhancement implementation can then be processed as usual.
    Enhancements  means inserting user developments into SAP development objects at predefined positions.
    The Enhancement Framework enables you to add functionality to standard SAP software without actually changing the original repository objects, and to organize these enhancements as effectively as possible.
    refernce :
    have a look at this article
    How to Create Enhancement Implementation in Web Dynpro ABAP
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81&overridelayout=true
    as pointed correctly by Saurav in earlier thread
    regards,
    amit

  • How to call a RFC of a remote system from an ABAP webdynpro component

    Dear Experts,
    I am a newbie in ABAP Webdynpro.
    I am working on a requirement where I have a webdynpro component on ECC system.I need to call a RFC located on CRM system from my webdynpro component on the ECC system.
    How do I do that ?? Please help.
    Regards,
    Mamai.

    Calling RFC from some other system is same as local except the difference is that you have to give destination name while calling.
    And the regarding the method of calling it depends on your FM.
    if it is big RFC with complex structure, you can create the service call for it with destination given as RFC desitination.
    if it is simple straight forward RFC you can directly call it.
    for creating RFC service call call use this method
    1. Starting the Wizard
    To start the wizard, position the cursor on the Web Dynpro component to be edited in the object list at the left margin of the
    workbench window. Open its context menu and choose the entry Create->Service Call. The wizard is started and leads you
    through the creation process.
    Press Continue.
    2. Choice of Controller
    On the second dialog window of the wizard, you can choose whether the service call is to be embedded in an existing
    controller or whether a new controller is to be created for this purpose. Service calls can only always be embedded in
    global controllers u2013 that is, in the component controller or in additionally created custom controllers. It is not possible, to
    embed service calls in view controllers.
    a. Select radio button Use Existent Controller
    b. Do not change the default entry for component: <CC name>
    c. Enter for controller COMPONENTCONTROLLER
    d. Press Continue.
    3. Service Type and Service Selection
    a. You now select, which service type should be used for this service call. Select radio button Function Module. Fill the
    destination here. Press Continue.
    b. Select the service: for Function Module enter <RFC name>. Press Continue.
    4. The Required Methods and Context Elements
    On the two subsequent dialog windows, default values are listed for giving names to the context nodes and attributes
    required by the service call as well as to the required methods. The proposed names are based on the names of the
    embedded service, but you can change them as required. However, heed the respective notes in the corresponding dialog
    box.
    a. Adapt Context: Select from Nodes/Attributes . Press Continue.
    b. Specify Method Name: leave all entries as provided: Component:  Controller: COMPONENTCONTROLLER Method: EXCUTE_ Press Continue.
    5. Completing the Choice
    When you have confirmed the last dialog box, the generation is triggered. Afterwards you now have the required methods
    and contexts at your disposal for using them within your Web Dynpro component.
    or if you want to call directly the use the call statement with destination

  • Adding a new field to a standard webdynpro component's layout

    Hi all,
      I need to add a new field to a standard webdynpro component's( in my case the component is ''/SAPSRM/WDC_UI_SC_DOTC_BD')  layout.How do i go about adding a new field to the standard component's lay out?
    can anyone help me with the necessary details?
    Regards,
    Abhinay.

    Check if this is useful to you (Login required)
    https://websmp105.sap-ag.de/~sapidb/011000358700001969972008E.pdf
    Rgds/Kiran

  • Consuming webservice in a webdynpro component

    Hi Experts,
    I have a third party free webservice as WSDL link.My requirement is to make use of that webservice in my webdynpro component.
    Can any body give me a step by step approach to consume that webservice in my webdynpro Component.
    If possible, Provide me some good material for consuming webservice in a webdynpro component.
    Awaiting for a useful reply.
    Thanks,
    Ramanan.p

    hi,
    Few indroductory sessions
    /people/thomas.jung/blog/2007/12/17/consuming-services-with-abap -Consuming webservices with webdynpro.
    It is possible to create webservice in ABAP as well as in Webdynpro.
    ABAP Webservice:
    http://wiki.open-esb.java.net/Wiki.jsp?page=BAPIWEBSERVICE
    http://www.sappro.com/downloads/SAPXI.pdf
    Webdynpro Webservice:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/db785a70-0701-0010-858c-eee0ec4fe1b3
    In Web Dynpro ABAP there is nothing special about calling a web service. Unlike WD Java, there are not dedicated model object types in WD ABAP. WD ABAP simply has the ability to interact with other ABAP development object types. You can call function modules, ABAP classes, even modules in old dynpro apps.
    So calling the webservice from ABAP therefore is just the process of generating the ABAP Proxy Class. This is the same process regardless of if you want to use this proxy class from WDA or any other type of ABAP development object. You can then call the proxy class from WDA just like any other type of ABAP class. There is a service wizard option in later support package levels that includes an option for ABAP Proxy classes - although it doesn't generate the proxy class it just generates the code and context for the call to an already existing proxy class. The service wizards in WD ABAP are not required however. They are just shortcut code generators and often can't even generate a complete context for a complex web service proxy - so expect to do some manual adjustment after running the wizard.
    Edited by: Mahalakshmi kothuri on Jun 1, 2008 4:17 PM

  • How to get the floor plan in Webdynpro component ?

    Hi,
    How to get the floor plan in Webdynpro component ?
    Best Regards,
    Tripathi

    Hi,
    Just copy the templates from Webdynpro Component by choosing OIF or GAF or QAF template.
    Regards,
    Bansidahr

  • Webdynpro Component in Guided Procedures

    Hi Experts,
    I am very new to guided procedures, please help me out.
    Scenario: One Webdynpro Component with few input fields and btn, btn action saves the data in custom db tables. But, i need to mail the filled form to some approver and from there, if the form is approved then save to db else reply with unapproved form.
    Please can anybdy tell me, hw i will b able to do all this using guided procedure.
    I found some queries and tutorials, also i followed the same steps..bt while creating a new webdynpro object in process action. After selecting my comp from server, it dint shwed up those input field parameters in parameter tab of object or newhere...y so??? Are there any settings to b done??
    Also, while assgning roles, its bit complicated,...can anybdy explain me that part???
    Thank You So Much Experts,
    Runal

    Hi,
    I think, you can resolve your issues by going throuh these links
    [link1|http://help.sap.com/saphelp_nwce10/helpdata/en/43/34be0d89f01bcce10000000a1553f7/content.htm]
    [link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
    [link3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
    Sampath
    Edited by: Sampath Gunda on Jun 6, 2008 2:35 PM

  • Identifieng Webdynpro component name from the portal screen

    Dear experts,
    I have included 4 custom fields in the header of the Shopping cart creation which are Change order New order Document type and Document number( In SPRO ). Those fields are appearing as input fields on the portal screen but the requirement is to make Change order & New Order appear as Radio button and Document type should appear as dropdown list.
    I wanted to identify the webdynpro component by Right clicking on th portal custom fields-> More info
    I tried opening the webdynpro component shown but could not find the Custom fields appearing in the portal.
    Can you please suggest an alternate way of finding the the exact WDA component so that I can modify the custom fields according to my requirement.
    Please provide your valuable inputs.
    Regards,
    Murthy.

    Hi Murthy,
    You  have checked correctly.
    The custom fields  added thru spro are not visible in the component view layout.
    Enchance the webdynopro component by creating new addition of fields.
    regards,
    Neelima

Maybe you are looking for

  • XML CLOB out from a stored procedure

    I'm using Oracle 8.1.7 and OO4O(Oracle Objects for OLE) 8.1.7.0.1 I'm generating an XML string in a CLOB using the XSU in a stored procedure. I'm then trying to pass the CLOB as an out parameter for that procedure to an ASP page using OO4O. I get the

  • I am locked out of my ipad and didnt set a password

    A physical attempt was made to access my ipad and after 10 unsuccessful attempt to gain access it locked the unauthorized user out of my ipad.  Now i can't get on nor use my ipad.   what can i do?

  • Clamshell Mode With 30" Apple Cinema HD Display

    Hello, How can I use my 17" MacBook Pro with my 30" Apple Cimema HD Display in clamshell mode (with lid closed). I can only use it in clamshell mode when the AC adapter is plugged in. When I try to wake the computer from battery, it turns on but then

  • How to create shortcut on iPad

    How do you create a shortcut on the ipad

  • Enabling Flashback

    Hi, when I enable flashback using the following - define the FRA ( db_recovery_file_dest_size and db_recovery_file_dest ) ensure the DB is in archive log mode set the flashback_rentention_target alter database flashback on; what exactly am I enabling