MDNSResponder SendRecordRegistration: Error formatting message for 21796

Subject pretty much says it. I'm seeing this message in the console. The longer I run my Mac Pro the message is more and more frequent to the point where this message will post into the console 4 or 5 times every 10 seconds...
Here's the complete message from the log (minus some data like my name, etc)
9/6/08 6:59:53 AM mDNSResponder[16] SendRecordRegistration: Error formatting message for 21796 [email protected] NULL RDLen 21796:
Any thoughts on where this message is coming from and how to fix it?

I'm having the exact same problem, but on a MBP. It actually causes my machine to lock-up sometimes. Does this issue freeze your Mac Pro ever?
Anyway, a temporary fix until Apple does something about this can be found at
http://discussions.apple.com/thread.jspa?messageID=7586605
All this does is turn off Bonjour (which is what mDNSResponder is). This should solve the problem, but can be a bummer if you use Bonjour.
Incidentally, do you have a MobileMe account? I tried it out a bit, but decided it wasn't for me. My account is inactive, yet the fact that MYOLD_MOBILEMEUSERNAME.members.mac.com was showing up in console tells me that MobileMe is probably still up to no good on my machine.
It sure would be nice if MobileMe would decide to stop locking up my computer, especially since I don't even have an account anymore.

Similar Messages

SendRecordRegistration: Error formatting message for 13425 - since upgrade

SSIA...
I'm seeing this error every 5 seconds - repeated 4 times ever since I upgraded...
I've stripped out some of the details (since they related back to my machine, members.mac.com, etc..
Help?
9/18/09 1:39:49 PM mDNSResponder[17] SendRecordRegistration: Error formatting message for 13425 johndoe@John-Doemac._presence.tcp.xxxxx.members.mac.com. NULL RDLen 13425: ....

seems to be fixed with the later releases of snow leopard.

OSB to Bpel -- BEA-382612: Error preparing message for dispatch

I posted this in " SOA & Process Management", but later realized that it belongs here. so posting here again.
We have Soa Suite 11g and OSB 10.3.1 runinng on unix machine. I performed the following steps:
     1. Created Bpel service and deployed on soa server 11g
     2. Imported WSDL into osb 10.3
     3. Created BS service based on WSDL and used WSDL url of BPEL(http)
     4. Created proxy service and called BS
     5. I have only one step in proxy, just to log the incoming xml
When I run the proxy, I am receiving the following error and my log is not showing any message:
     BEA-382612: Error preparing message for dispatch
Question:
     1. I enabled logging and monitoring for my service, and still not seeing any log messages. How can I enable logging?
     2. Is anything missing during the installation to communicate between OSB and BEPL using http?

Hi,
1. I enabled logging and monitoring for my service, and still not seeing any log messages. How can I enable logging?Make sure that you have enabled Message Tracing. For logging related problem, please refer -
Re: "Log" action is not working in OSB10.3.1.0
2. Is anything missing during the installation to communicate between OSB and BEPL using http?I think problem is between Proxy Service and Business Service. Proxy service is not able to invoke Business Service. Open the test console of Business Service and check the format of input required. Proxy service must pass input to BS in the same format. Use Assign and Replace action in message flow of Proxy Service to format the request going to BS.
Pay special attention to the namespaces being used.
Regards,
Anuj

API5072: Internal Error: Null message for exception

OWB 11.1.0.6 on Database 11.1.0.6
Suddenly i am getting this internal error while saving.... Can't save the work please help!!!!
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.jcommon.CommonUtils.error(CommonUtils.java:298)
     at oracle.wh.ui.console.commands.CommitCmd.performAction(CommitCmd.java:27)
     at oracle.wh.ui.editor.WindowHelpEventHandler.handleSaveAll(WindowHelpEventHandler.java:239)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.wh.ui.editor.listener.ReflectListener.invokeMethod(ReflectListener.java:41)
     at oracle.wh.ui.editor.listener.ReflectActionListener.actionPerformed(ReflectActionListener.java:33)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5501)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3968)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1778)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Hi,
Thsi is the famous NULL pointer exeption. There may be multiple reasons for it and sometime it may also happen beacuse of lost connection to DB, instance may have gone off etc...You cannot retrive the work back as far as i know when u strike this error.
Plz save ur work after every change or operator u put into the mapping as a safety precausion.
Regards,
Bharath

Error 6 Message for Photoshop CS4

I am on PC with Photoshop CS4, and all of a sudden whenever I click on it it gives me a message saying photoshop has encountered an error that requires me to restart my computer. I have restarted my computer twice and still gotten an error 6 message. I don't know what this means, and sorry for my lack of knowledge or if this seems like a simple qustion. I am wondering what a possible solution might be?

A lot of people do have Bridge running without knowing it. It runs as a hidden instance and is visible in Task Manager under the Processes tab, not as an application.
This is because by default Bridge is set to start with Windows in preferences – some crazy idea from Adobe that causes more problems than it's worth. You can end the process in Task Manager.
If this is the case with you, you would be best removing the plug-in file you added manually and trying again to run the ACR installer.

GR out put error :No messages for initial processing exist

Hi All
When Im process the out put for GR using T-Code MB90, the following message appears and I'm able to see the out put "No messages for initial processing exist".I have checked the three processing modes even it is giving the same mesaage.Can any body help to how to see the GR out put.
thanks and regards,
Sri.........

Hi ,
I think the necessary condition records might not exist.
You can maintain the same using MN21.
Also check whether the necessary customising is done using Transaction NACE and by selecting application ME.
Regards
Ramesh Ch

Dbms_Scheduler - finding out Oracle error codes / messages for failures

Hi,
I am using Oracle OLAP to schedule a refresh of cube data in the background and this is using the dbms_scheduler functionality, now I need to find out when and why a refresh job fails. I have found the dba_scheduler_job_log which tells me if it failed but I can't find anywhere why ?? Are the failure reasons logged anywhere ??
Thanks in Advance,
Brandon

PUBLIC.DBA_SCHEDULER_JOB_RUN_DETAILS [SYNONYM]
SYS.DBA_SCHEDULER_JOB_RUN_DETAILS [VIEW]
The details of a job run
Column Name                    NN? Datatype                           Comment
LOG_ID                             NUMBER                             The unique id of the log entry. Foreign key on entry in
LOG_DATE                           TIMESTAMP(6) WITH TIME ZONE        The date of the log entry
OWNER                              VARCHAR2(30)                       The owner of the scheduler job
JOB_NAME                           VARCHAR2(65)                       The name of the scheduler job
JOB_SUBNAME                        VARCHAR2(65)                       The subname of the scheduler job (for a chain step job)
STATUS                             VARCHAR2(30)                       The status of the job run
ERROR# NUMBER The error number in the case of error
REQ_START_DATE                     TIMESTAMP(6) WITH TIME ZONE        The requested start date of the job run
ACTUAL_START_DATE                  TIMESTAMP(6) WITH TIME ZONE        The actual date the job ran
RUN_DURATION                       INTERVAL DAY(3) TO SECOND(0)       The duration that the job ran
INSTANCE_ID                        NUMBER                             The id of the instance on which the job ran
SESSION_ID                         VARCHAR2(30)                       The session id of the job run
SLAVE_PID                          VARCHAR2(30)                       The process id of the slave on which the job ran
CPU_USED                           INTERVAL DAY(3) TO SECOND(2)       The amount of cpu used for this job run
ADDITIONAL_INFO                    VARCHAR2(4000)                     Additional information on the job run, if applicable

Error 401 message for facebook

My daughter logged me out of my facebook app then when I tried to log back in I got this message "sorry an unexpected error occurred. Please try again later error code 401 FBAPIEErrorDomain" It is driving me crazy -I even tried changing my password- Does anyone know what is wrong or what to do?

Tasha36 lets make certain that you stay in loop! We'll make certain to do everything we can to get you logged back into Facebook. Fill us in on the details and we'll get right to work. What device make/model do you have? Are you able to log in through the browser?
AshleyS_VZW
Follow us on Twitter @VZWSupport

No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

Oracle Error Code and Message for Query Timeout

Hi,
I need to catch the oracle error code and message for query timeout.
I am using Oracle 9i and could not find any relevant error code/message
for query timeout in Oracle Error Messages.
If anyone has encountered such error messages, please let me know the
Oracle Code or Error message.
Thanks & Regards,
Kanjana

Fly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
HTH -- Mark D Powell --

Error / sucess message in processes

got kind of a 'stupid' question:
I updated a page (which contains a list) and set error/sucess messages for an insert/delete process (after submit) which is called everytime the user enters data in the list or deletes a record from the list.
But the error/success message isn't shown on the page - what went wrong? Did I forget a setting etc? The process itself is working properly, new data is saved in th db or marked as deleted, according to the user action.
Thank you!

This thread seems to be about checking the "include process success message" in the Action section of a Branch. I had the problem described and because of the hints here clicked that box in an unconditional branch and then was able to see in the #SUCCESS_MESSAGE# region the value assigned to apex_application.g_print_success_message once the branch took effect.

No messages for initial processing exist in MB90

Hi friends,
   When i try to take print from MB90 the error "No messages for initial processing exist" for Goods receipt --> others MIGO.
     I maintanin the Print controls in SPRO --> MM --> IM --> Print Control.
      Please help me in this issue.
Regards,
Mahi

Hi Anbalagan,
   Thanks for your Reply.
Here MM consultant is now not available thats why i post question here.
Personally i check some forms are assigned to Material document. But i know some is to be configured. but i dont know what it is. If you know the procedures please guide me.
With Regards,
Mahi.

Error Log messages

Hi,
Does anyone know where I can find a listing or library of error log messages
for iPlanet Enterprise web server (Admin Server & Web Instance Log)?.
Thanks in advance for all your help!!!
Joe

Hi Joe,
You could find few of them at :
<server root>\plugins\include\nspr20\prerr.h
Thanks,
Srivatsan.
Joe wrote:
Hi,
Does anyone know where I can find a listing or library of error log messages
for iPlanet Enterprise web server (Admin Server & Web Instance Log)?.
Thanks in advance for all your help!!!
Joe

Error message for Unable to connect (BIB-16633)

Dear All
I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
Can anyone give me what is the error message for BIB-16633.
Would be really grateful if you could give me a solution as soon as possible.
Thanks & Regards,
Mr.Tsang. Hong Kong

For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
You can check the state of the OLAP option using the following commands in SQLPlus:
column comp_name format a35
SELECT comp_name, status, substr(version,1,10) as version
from dba_server_registry order by modified;
Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

How to show a single error message for all fields

Hi
I have a JSF from containing around 10 controls(input, select etc.) .
Now I need to display an error message in case any of the mandatory control has validation error.
Message format would be like
"*Please,Complete the fields marked with yellow!"* The message I need to show in a div tag with Yelow background.
Currently, I am getting individual default error message in case validation fails and related field is bordered with Yellow.
My code is below.
*<h:panelGrid columns="3">*
*<h:outputText value="#{msgProv.bi_firstname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText*
*value="#{brokerInformationFields.firstName}"*
*label="#{msgProv.bi_firstname}" id="firstName" required="true">*
*<f:validateLength maximum="10" minimum="2" />*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:outputText value="#{msgProv.bi_lastname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText label="#{msgProv.bi_lastname}" id="lastName"*
*value="#{brokerInformationFields.lastName}" required="true">*
*<f:validateLength maximum="20" minimum="1"/>*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:commandLink action="#{brokerInformationActions.submit}">*
*<h:graphicImage value="/images/axa/btn_submit_from.png" style="border:0px;"/>*
*</h:commandLink>*
I am using (JSF1.2,Rich Faces 3.3.0,Facelets.)
And a Phase Listener from
http://balusc.blogspot.com/2007/12/set-focus-in-jsf.html
This Phase listener is to border the control with Yellow in case validation fail.
Now my Query
*1) How can I show a single message for all fields as I marked above in case of validation failure?*
*2) Now, the control is becoming yellow borderd when user clicks the submit button and validation fails.*
*User can move from one control to other using tab. That time proper validation message is appearing.*
*but the border of the control is not changing to yellow.*
*What's the correcion can be made to meet that requirement too.*
regards
Roy

Hi Nabheet,
Thanks for your response.
The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
Thanks.

MDNSResponder SendRecordRegistration: Error formatting message for 21796

Similar Messages

Maybe you are looking for