MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

Similar Messages

Copy of BW causing issues while connecting to R/3

Hi;
I have done a copy of our Dev BW system (640) and trying to restore the existing source system connections to R/3 (640). I am getting the errors while restoring it; it says source system already connected to A1 (original) logical system and asking me to delete it first so I can restore it on copied one. I wanted have both BW systems connected to same R/3 system. I know this is possible in 700 but any idea if it is atall possible in 640?
If yes, I am not sure which part I am missing. Any idea?
R,
Pankaj

Hi,
Since u have created a new system the two BW are different now. For the copied system u have to run the Tcode BDLS and make a fresh connection with the existing system
Regards
Ravish

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

Issue while connecting from Biztalk adapter to SAP ECC 6.0

Hi Friends
Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
Can you please tell anybody the solution for this.
Regards
Praveen

HI,
is there a special "formation" to put in the user / pass ?
maybe a missing domain ? or missing values like "/" or "\" ?
Do you getting this error in the Biztalk Monitor (Visual 2005) ?

Thunderbolt and MDP to VGA Adapter Compatibility Issue?

Hi Veterans,
I know this topic have been asked a lot of times by different people who faced the issue in different way. However, i am unable to find an absolute solution to the problem i am facing currently.
My question is, can a 3rd party made, Mini Display Port to VGA adapter works on MBP & iMac that have mini display port and not on those that have thunderbolt port??
I have a 3rd party made, Mini Display Port to VGA adapter that i have tried on 3 apple PC / laptop,
A MacBook (13-inch, Late 2009) which comes with Mini DispayPort, the adapter work with this laptop.
A iMac (21.5-inch, Late 2009) which comes with Mini Display Port, the adapter work with this PC too.
A MacBook Pro (13-inch, Late 2011) which comes with Thunderbolt port, the adapter does not work with this laptop. I have tried many solutions i can find on this forum and none helped.
The software is fully up-to-date as of 30 April 2013, running Mac OS X 10.7.5 (Lion).
Tried safe mode, does not helped.
Tried the boot up when monitor is already switched on procedure, does not helped.
In all cases, it was tested on the same external monitor. As my MBP was dual-booted using Bootcamp assistant 4.0, i also tried in windows-mode (windows 7) which didn't work too. In windows mode, the screen just keeps flickering while in mac-mode i get a light blue screen. In both cases, the external monitor shows nothing. The external monitor is a Compaq FP7317 monitor with native resolution 1280 x 1024 at 75.0 Hz.
All these trying have leave me very perplexed. From my research, the thunderbolt port is suppose to accept devices meant for mini display port. So how could an adapter that work on mini display ports, not work on a thunderbolt port? Can any expert enlighten me?

Problem solved. I picked up the MDP to VGA adapter and was able to use the monitors native res of 1920x1200 but the flicker and wavyness made it impossible to use. And yes the adapter had the current firmware. But what I discovered in the process was that in mirror mode I am unable to drive the monitor at optimum resolution. With that in mind I tried the MDP to HDMI adapter again, unchecking mirror mode, moving the Finder bar to the external display and SHAZAM. I have a rock solid display external display now running at 1920x1200 : )

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

Do multiple bindings still causing issues for PowerPivot workbook in SharePoint 2013

Do multiple bindings still causing issues for PowerPivot workbook in SharePoint 2013 as they did in SP2010? Here is the link about 2010 issue :
http://support.microsoft.com/kb/2712071

Hi Norm,
I searched internally, and I couldn't find any information related to this issue applied to SharePoint 2013, it shouldn't exist in SharePoint 2013.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

MacBook Air mid-2013 OSX 10.9.1 cannot connect to DVI Monitor

Does anyone else have this problem? I've seen similar issues raised, but so far can't find a solution to my particular issue:
MacBook Air Mid 2013 (ordered Jan 2014)
- 1.3GHz Intel Core i5
- 8GB 1600MHz DDR3 RAM
- OSX 10.9.1 Mavericks.
When I connect my MacBook Air to any monitor (well, I've tried three monitors: Benq, NEC and Samsung) the monitor will not detect an attached computer. The MacBook also does not think it's connected to an external display.
If I connect via VGA cable, it works fine most of the time*, so the display port seems to work only for VGA and not DVI.
I am using mini display port adapters (DVI and VGA) purchased from the Apple Store.
The adapter for the mini display to DVI works fine, since I can get my 2009 MacBook unibody to connect to an external display via DVI without issue. So it's not the adapter, or the DVI cable.
I have tried resetting the System Management Controller for my MacBook air but it does not work. No matter how many times I reset the computer (Hard reset, Soft power down, SMC reset) I cannot get it to connect via DVI.
Has anyone experienced this issue, or seen a resolution for it?
*The only other symptom I get periodically, is that after being disconnected from a VGA monitor, the computer will periodically (about 2/5 times) not connect to the VGA monitor either without a reboot. However it will connect most of the time, and ALL of the time after a reboot.
Thank you

Thanks themachead: I have tried the adaptors on different macs, as I indicated in my post. The adaptor works fine with a different mac
Yes, I have also tried starting up with the monitor connected, and disconnected.
I just got off the phone with Apple Care. They couldn't solve my issue through normal means, but during one attempt, we closed my MacBook Air while it was connected to the external display, with my Magic Mouse and Apple Keyboard connected via Bluetooth. The external monitor did not come on. However when I opened my Macbook Air's screen, we saw that my Mac had crashed and prompted me to reboot. When it did, the external monitor worked. I have been able to disconnect and reconnect the monitor and it seems to be working now. I will see what happens after a few attempts.

Help! My Canon MG5520 printer is apparently not connected to my late 2013 MacBook Pro!

Help! My Canon MG5520 printer is apparently not connected to my late 2013 MacBook Pro! I have had this printer a few months and everything has been working fine until today. I did I have to turn my wifi router on and off this morning, so I think that might be it. I'm not extremely tech savy, so if anyone could lend a hand, I would appreciate it!! I've tried unplugging it, turning it on and off again, quitting it my from laptop, nothing works. Do I need to reconnect it to the wifi? How do I do this? I turns on fine and doesn't give my any error messages, it'st just my laptop that says it isn't connected. Sorry if this is a stupid question.

Thanks for providing complete information. It seems like you've ruled out faulty docking cable, bad USB port, and software issue on the new Mac. And since the shuffle still works fine on the older Mac, it's not a problem on the shuffle.
Some things to try...
Connect the MacBook to its power adapter, so that it's not running the battery power. If any other USB devices are connected, try connecting the shuffle as the only device, to a direct USB port on the MacBook.
If you can keep it connected for long enough, go to the shuffle's Settings screen in iTunes and set it to Enable disk use (and Apply). This will keep the shuffle's disk mounted continuously, instead of iTunes unmounting the shuffle's disk when not syncing.
If you happen to have an old USB 2.0 hub that has its own power supply, connect the shuffle through the hub to see if that make any difference. The new Macs have USB 3.0, so if that's the cause, maybe a USB 2.0 hub in between can act as a "buffer" and make it work.

Trouble connecting Macbook Air and iTunes with Apple TV

When I tried to connect my iTunes to my Apple TV,this message showed 'An error occurred while connecting to the AirPlay device “Apple TV”. An unknown error occurred (-15000)'. I just changed my iTunes ID. I am using Macbook Air 13" mid 2011 OS X Lion.
Anyone has the same problem?

goto settings on your appletv and reapply your new Apple ID information to correct the issue. Same on your Air also if you havent already done so

Connecting macbook air with bose wireless sound link?

Can someone tell me how to connect a previously paired macbook air to a bose wireless soundlink? I can pair them, but they will not connect.

I had the same issue with my macbook air intel i5, latest os, and this is the way it worked for me:
1.- When you pair for the first time your macbook and your bose soundlink, your soundlink will appear in your Bluetooth menu at the left side list, but it is not conected yet... just recognized... so your soundlink doesnt make the tipical pairing sound...
2.- So the next step is to Set your Soundlink as Audio Device, in the same Bluetooth menu (below the devices list) just select the Soundlink so it becomes blue and then click on the mesh or gear icon and you,ll get a submenu, then just select Set as Audio Device, and done!
Please note that even at the time you do that your soundlink is not going to do the pairing sound, you need to start playing music or movies or games to get actually paired, and for some reason if you stop playing it for a few minutes it gets unpaired again and only start again if you play again music, movies or games... kind of anoying because then you will hear the pairing noise very often...
I hope this help somebody.

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

Greetings loschach,
Welcome to the Apple Support Communities!
I understand that you would like to set up wireless printing with your Mac running Mountain Lion. To complete this task, please read over and work through the instructions located in the attached article.
OS X Mountain Lion: Set up a printer to print wirelessly
Cheers,
Joe

What is the best way to connect macbook air to present power point presentations

What is the best way to connect macbook air to present power point presentations

Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Similar Messages

Maybe you are looking for