MDR-10RBT - Bluetooth connection - microphone sounds like I am 100 miles away

MDR-10RBT - Bluetooth connection -
I have got these headphones connection to my laptop and they are showing up as connected as both a A2DP device and also a hands free headphone.
I have directed Skype to use the hands free device for the microphone but it sounds like I am stuck in a box 100 miles from the microphone.
Anyone else had this problem or have any ideas on how to fix?
Thanks
Phil

Hi Vortal! Sony Germany has a separate Community which can be found here Please visit it for further assistance. Thank you!
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

Bluetooth connection notification sound

Does anyone know how to turn off the notification sound which plays when the Razr Maxx bluetooth connects with a car system? It is extremely annoying to have this play every time you get in the car and start it especially if you are running errands and make several stops.

Most notifications that come from an app (texts, emails, etc.) can be shut off individually, through that app. The bluetooth connection notification, however, AFAIK cannot. The only place it would make sense to be would be, from your homescreen, is menu>settings>wireless & networks>bluetooth settings. There is also an advanced bluetooth settings on this screen, but my phone (HTC Rezound) does not have an option to turn off that sound in either of these.

Microphone, sounds like a rob

Sometimes, when i open voip programs like xfire/teamspeak/ventrilo to talk with people, they tell me that i sound like a robot, so i pop into the option menu to check and indeed, they have right. This only happens a few times, and often fix it self by restarting the voip program.
PC spec:
Vista x64
X-FI Xtrememusic
Asus P5K-E
4gb ram
8800gts 640mb
Anyone know what this can be? beside this robot like voice i get sometimes there is no other problem i have had so far. running the latest 0002 driver from the site.

Yeah I had the same mic problem when using those drivers, mic works fine with the older march release drivers, & I think with the may release drivers too......just not the 2.5.0002 version

Bluetooth connected - no sound

I've been googling this for quite a while and all I managed to find was - lots of questions with no answers. No answers at all, not even suggestions... Anyway, here it is.
I have 8900 which I can pair with any BT headset but when I place a call or when a call comes, I have no sound and the other party can't hear me as well. The issue exists with BT headset, my car audio and etc. Exactly the same phone my wife has works fine.
If anyone saw any guide how to troubleshoot it, I would greatly appreciate it! I am completely lost here.

Same as everywhere else - no feedback.
May be I can ask differently. Let me try...
Is there a way to 100% reset the device? Wipe out all the configuration, application permissions, reinstall the software and etc.? 100% factory defaults. I tried loader /resettofactory (or whatever the option was) but it seams the option keeps some of the preference. For instance, once an application is re-installed, BB recalls it's placement on the home screen and etc.
I think if I 100% "reformat" the device, I can get BT to work. I do not believe it is a faulty unit since I can stream music via BT to my car audio but not the phone. I am convinced it is the software.
Any help?

My microphone sounds like a robot/ underwater to other users.

Hi, whenever I join a call with my friends whether it be audio only or audio + video, my microphone becomes distorted and my friends cannot even make out a word that I am saying. This only occurs in the client version of Skype and when I use the web version, my audio is 100% clear and non-distorted. I have tested my mic on other programs and it is fine too. I have disabled my webcam mic so I know it is not that. I have a HyperX Cloud headset in case that helps solve anything. Thanks!

Skype needs some serious recoding ASAP...
This has been been reported to HP already by many users. :-(
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Microphone sounds like under water since update

Me and my boyfriend both updated our phones a few months ago and since then when we have calls, people always comment one minute they can hear us, the next it's like we are under water and they can't hear a word, This is extremely annoying as we always have signal and it's only been an issue since update, Anyone else having same problem? We both have z1 compact, was told by Sony to repair software but we will lose stuff if don't save it and can take an hour but why should we have to do this when fault isn't ours?!

Sometimes reinstalling the latest update with PCC smooth things out PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

Trying to connection Mac Mini to HD Projector 100 ft away....

Is HDMI an option or will I need to go another route? Setting up a new HD Projector in a church sanctuary and want to get the best picture available out of it.

100 feet is near enough 30.5 metres. This is longer than HDMI or DVI would normally go, and also VGA. What you are going to have to do is use a product that converts the video signal to send it over different cabling and allows you to go a longer distance. I am listing an example product below, you would need a converter at each end, the following is for a pair.
http://www.amazon.co.uk/Cablesson%C2%AE-Extender-Ethernet-Single-network/dp/B003 XFSNSA/ref=pd_cp_ce_4

Bluetooth connection issues after update

Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.

Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H.

I want to record a keybord connected by usb in an IMac and only sound like an ambient microphone. What is wrong?

I want to record a keyboard connected by usb port and only sound like an ambient microphone. What configuration is wrong? Thank you

The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

Bluetooth connection causing iPhone not to sound ring

Suddenly it's gotten so that my iPhone4S (on Verizon) isn't ringing when Bluetooth is on. It does get calls on the screen and it does make sound otherwise. I turn Bluetooth off, and it always rings now.
I suspect this may be particular with the Pansonic land-line headset/bluetooth connection I use. It was great when working in that my land lines would ring (with the sound of my cell ringtone no less) and I could get cell calls on any headset in the house. It used to work all the time (For several months at least and perhaps my bluetooth on this phone isn't as strong as the old 3GS?)
Something to look out for if your phone stops ringing and can't otherwise be explained or fixed by resets etc.

I have an iPhone 4 and have the exact same problem as you on the same Panasonic landline. I rebooted the landline and it worked temporarily, but soon stopped ringing. Rebooting phone also a temporary fix. Don't think it is a Bluetooth issue, just an Apple issue. I went back to my Droid X and it has worked for several months with my Panasonic landline with absolutely NO issues at all. My wife uses the iPhone 4S and the "silent" ringer issue remains. This ***** because I REALLY like the iPhone much better, and my wife could care less, but I bought the Panasonic landline specifically for this capability for the convenience of ringing and using the landline handsets, and this feature is more important to me than anything else. And now I wouldn't want to take the chance on any new iPhone versions in the future that this issue may come back, especially after the initial 30 day "trial" period.
Please keep me updated should ANYONE stumble upon a solution!
Thank you in advance!

Can not pick up sound through the Bluetooth headset microphone.

I use a Plantronics Bluetooth headset M55 connect new IPAD (IOS6.0), long press the voice dialing, SIRI from Bluetooth headset microphone can not pick up sound, still or IPAD comes with a microphone to pick up sound, SIRI does not recognize, but canfrom the earpiece of the Bluetooth headset to hear the SIRI feedback sound.Want to be able to solve this bug.

Same issue on my wife's iPhone 4S. I suspect it is related to the recent 6.1.2 iOS update (Note: I have a 3S and the update did not cause any issues).
I've tested both bottom and top mics on the 4S using video recorder and both mics work fine. Speakerphone and headset during calls also work fine. The issue is only related to the bottom mic while making calls. I can hear the caller but the caller cannot hear me. If I hold the mic very close to my mouth, the caller can hear a very low level signal.
The problem appears to be software related, not hardware.

Bluetooth connectivity problems: LG Sound Bar NB3530A

Any suggestions on how to improve the quality of sound. My Mac seems to connect with my sound bar, but the playback is choppy and interrupted. Sort of sounds like a scratched CD when I play music. I have updated to the latest OS yet still the problem persists. Any suggestion?

JJust got this sound bar ans it's great! Minus this same bluetooth issue I also have..

Bluethooth connects with car bluetooth but no sound. This problem started after up dating to IOS 8.0.2. Any suggestion to fix the problem?

iPhone: 5s,
Problem started after IOS 8 up date.
Problem: Bluetooth connection with car indicated: connected.
               Incoming call: no sound (caller's voice) from car speaker.
               Out going call: no ring sound through speaker.
              At random shows calling but can not hangup & no ring sound.
Car: Infiniti G 37    2009.

I uploaded ios 8.0.2 on my iPhone 6 128 GB today 9-29-14 due to problems with Bluetooth talking to my ReSound Linx hearing aids to hopefully fix the problem. It sounds like the Bluetooth looses connection to the hearing aids and turns them off for about 1 1/2 minutes, then they come back on and I can hear again. I understand there are problems with Bluetooth and cars using the phone. I believe this Bluetooth problem is causing my hearing aid problem as my hearing aids connect to the iPhone via Bluetooth and the ReSound Smart App. I tried the reset fix, Settings>General>Reset>Reset All Settings as some have suggested but that did not resolve this issue either. I can't believe Apple is not talking about this ios 8.0.2 Bluetooth problem. This affects my everyday life in that I cannot hear when the Bluetooth drops.Try working with your hearing dropping every few minutes! If Apple wants in the Health field, I suggest they take their QA a little bit more serious than they are at present. Whomever was responsible for testing ios 8, 8.0.1 & 8.0.2 should be fired! This is causing more trouble than anyone can imagine. I understand the car - Bluetooth problem but think about the fact that if every time the Bluetooth drops, you can't hear.My job could be in jeopardy. I posted the problem to Apple Support and they will not even have the decency to respond with even a "we are sorry." How long do I have to go without being able to hear before Apple responds??????

Bluetooth connects fine to Car but no sound.

Hi,
I had that BB pearl 8220 for a while now. Bluetooth worked fine in my car for about 6months. (Since I have the phone I guess...)
But now for some reason I can't hear/can't be heard when using it.
The radio works fine, I have tested it with another phone so its not the issue.
The phone is paired fine, I can make/receive calls but like I said, no sound on either end.
Pulling out the battery did not help, I have checked the volume when in a call, it is at max and not muted.
I tired unpair/paring again... No joy.
I pretty much checked every setting I could think of and for once... google did not help.
I am puzzled as it worked fine for a long time, I would test it with another bluetooth device but I don't have one and I doubt it would work either since the radio is just fine...
I don't really want to try a full wipe but I will if no one here can help me.
Anyone has any idea what the problem could be?
Thanks,
InFlames

Ive experienced exactly the same issue with an 8900 pearl. The handsfree bluetooth connection has worked fine in my Nissan Navara, but just bought a new vehicle and had a Clarion nx509e stereo, sat nav unit installed. The blackberry connects to it with no problem, when receiving a call the stereo cuts the music and shows 'telephone interrupt' but with no sound.
No-one has been able to help other than say that Blackberrys are troublesome.
What next?

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

MDR-10RBT - Bluetooth connection - microphone sounds like I am 100 miles away

Similar Messages

Maybe you are looking for