MDR-ZX100 sound results not same as bundles headset sound quality

Hi guys, could you help me, how can MDR-ZX100 headset produce the same quality of sound as the bundled headset of xperia z1? The sound quality of MDR-ZX100 produces low sound quality including the bass... Could an adapter solve the problem?

its because the z1 3.5 aux port does not give high voltage that is the reason for low noise xda dev have found the solution but dont know why sony isint giving us a proper software in the firmware 
this is the link but for this u have to root the phone 
http://www.xda-developers.com/android/increase-the-volume-on-the-sony-xperia-z1/

Similar Messages

  • "Qty Sales Result not Same"

    hai all Expert..,
    I have a problem with my Query .., may have that can help me.
    I create a Query for Qty sales, after I was working Excecute
    but after I check the results one by one with the sales results
    of the analysis appeared to have all that is not the same as the results of the analysis in sales
    SELECT T0.ItemCode, T0.Dscription,T1.OnHand,T0.DocDate,T0.ActDelDate, SUM(T0.BaseQty * T1.NumInSale) AS 'Qty Sales' ,DAY(GetDate()) as 'Days',
    Case WHEN Month(GetDate()) in (1,3,5,7,8,10,12) THEN 31 WHEN Month(GetDate()) in (2,4,6,9,11) THEN 30 ELSE 28 END AS 'Total days'
    FROM DBO.INV1 T0 INNER JOIN DBO.OITM T1 ON T0.ItemCode = T1.ItemCode
    WHERE
    T0.ItemCode  ='01000006' and
    (Month(T0.DocDate) = Month(GetDate())-1)  AND Year(T0.DocDate) = Year(GetDate()) and
    (T0.BaseQty * T1.NumInSale)>0
    GROUP BY T0.ItemCode,T0.Dscription,T1.OnHand,T0.DocDate,T0.ActDelDate
    ORDER BY T0.ItemCode,T0.DocDate
    Thanks...

    Try This
    SELECT T0.ItemCode, T0.Dscription,T1.OnHand,T0.DocDate,T0.ActDelDate, SUM((T0.Quantity * T1.NumInSale)-T1.OPENQTY) AS 'Qty Sales'
    ,DAY(GetDate()) as 'Days',
    Case WHEN Month(GetDate()) in (1,3,5,7,8,10,12) THEN 31 WHEN Month(GetDate()) in (2,4,6,9,11) THEN 30 ELSE 28 END AS 'Total days'
    FROM DBO.INV1 T0 INNER JOIN DBO.OITM T1 ON T0.ItemCode = T1.ItemCode
    WHERE
    T0.ItemCode ='01000006' and
    (Month(T0.DocDate) = Month(GetDate())-1) AND Year(T0.DocDate) = Year(GetDate()) and
    (T0.BaseQty * T1.NumInSale)>0
    GROUP BY T0.ItemCode,T0.Dscription,T1.OnHand,T0.DocDate,T0.ActDelDate
    ORDER BY T0.ItemCode,T0.DocDate

  • Resultant calculation but result not same

    I found one issue when I calculate the Resulatnt from head x, y, z acceleration data when I process the crash test data.
    one computer XP system the result channel name  is : ResultantXYZ,
    one conputer Win7 system the result channel name is : Res_from_XYZ  
    Who know why I have the different result channel name?

    Hi woshiyun,
    That looks like a difference based on the DIAdem version.  We harmonized the standard resultant channel names many years back so that they would be the same regardless of whether they were created with an English operating system or a German operating system.  You can branch your code based on the ProgramRevision variable.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

    After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

    Have you run it in a debugger? That will show you exactly what is happening and why.

  • I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
    if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
    on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
    let me know if this helps you..

  • Wireless keyboard mapping is not same as printed on Leopard and MacMini

    Hi ...
    I bought MacMini and Wireless Keyboard.
    when I type, the character that shows are not same like it`s printed
    This is what I type+
    Keyboard Mapping
    ~!”#$%&’()0=~
    `1234567890-^
    QWERTYUIOP`{}
    qwertyuiop@[]
    ASDFGHJKL+*
    Asdfghjkl;:
    ZXCVBNM<>?
    zxcvbnm,./
    If you have a Mac Keyboard, what ever it is, it will show different character as I type above, mostly on the special character.
    Can someone help me on this?
    Thank you and regads,
    Faizal A.-

    Hi Tom,
    Thanks for identifying the issue.
    I am trying to follow that article, here is the result:
    /System/Library/CoreServices/KeyboardSetupAssistant.app/Contents/MacOS/KeyboardS etupAssistant ; exit;
    2012-02-07 07:22:42.702 KeyboardSetupAssistant[491:507] No unknown keyboard connected - terminating
    logout
    [Process completed]

  • Compressor 4 crashes on opening keep getting this warning: The application "Compressor" unexpectedly quit while trying to restore its windows.  Do you want to try to restore its windows again? Tried Restoring windows. It crashes again.  Tried not = Same r

    Compressor 4 crashes on opening keep getting this warning: The application “Compressor” unexpectedly quit while trying to restore its windows.  Do you want to try to restore its windows again? Tried Restoring windows. It crashes again.  Tried not = Same result.  This is the first time I've actually used the app although I purchased it back in April (I think).  I had my first longform project completed in FCPX and tried sending it to Compressor 4 and got this result over and over again. 

    Steve,
    Sorry to say I've not had any success in getting Compressor 4 to work.  I've tried every suggestion mentioned earlier on this topic to no avail.  Compressor 4 is dead in the water.  On the last two projects I had to go back to Compressor 3.x.xx to complete the projects.  The only hint that I have of wha may have happened concerns something I did early on.  When I bought this computer I decided to replace the hard drive with a larger one.  Since I already had my software up and working on the drive that came with the computer I decided to clone everything to the new larger drive.  As I recall, Compressor 4 worked on the original drive but it doesn't work on this cloned version.  So maybe there is a relationship there.  I haven't had a chance yet to reinstall my old drive and see if C 4 works on it.  If it does work then I know the source of the problem but not how to fix it on the new drive.  Did you do anything like cloning your drive recently too?  It's just a thought and may not lead anywhere but later this week when I catch a break I'll give the old drive a try and will post my results.
    Thanks,
    Peter

  • Tunneling result not OK,

    Hi,
    What can you tell me about the following exception that I get
    trying to call a bean on Weblogic 6.1. My program tries to take the connection
    for several minutes and then java console shows the exception below.
    The problem doesn't occur when I take the connection from the
    same network where Weblogic is located.
    Can this problem be fixed with service packs?
    Could oracle8 have something to do with the problem?
    I don't know whether this helps anything, but it seems to me like the problem
    would have popped up by itself in the last times. With 'by itself' I mean that
    I haven't commited any changes what so ever to weblogic configuration, but still
    it has stopped working.
    The exception:
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD', id:
    '15'
    at
    weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
    at
    weblogic.rmi.cluster.EntityRemoteRef.privateInvoke(EntityRemoteRef.java:144)
    at weblogic.rmi.cluster.EntityRemoteRef.invoke(EntityRemoteRef.java:115)
    at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
    at $Proxy10.calculator(Unknown Source)
    at com.util.Loader$2.run(Loader.java:811)
    --------------- nested within: ------------------
    weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
    [java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
    id: '15']
    at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
    at $Proxy10.calculator(Unknown Source)
    at com.util.Loader$2.run(Loader.java:811)
    DEBUG util.Loader run:818 - ...model loading from the db in a thread
    done in 297828 ms!
    <16.7.2002 21:56:56 EEST> <Error> <HTTPClientJVMConnection> <
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD', id:
    '15'
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPClientJVMConnection.java:406)
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConnection.java:296)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    -Ohto

    Installing sp3(WLS 6.1) should get rid of this for you.
    "Ohto Rainio" <[email protected]> wrote:
    >
    Hi,
    What can you tell me about the following exception that I get
    trying to call a bean on Weblogic 6.1. My program tries to take the connection
    for several minutes and then java console shows the exception below.
    The problem doesn't occur when I take the connection from the
    same network where Weblogic is located.
    Can this problem be fixed with service packs?
    Could oracle8 have something to do with the problem?
    I don't know whether this helps anything, but it seems to me like the
    problem
    would have popped up by itself in the last times. With 'by itself' I
    mean that
    I haven't commited any changes what so ever to weblogic configuration,
    but still
    it has stopped working.
    The exception:
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
    id:
    '15'
    at
    weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
    at
    weblogic.rmi.cluster.EntityRemoteRef.privateInvoke(EntityRemoteRef.java:144)
    at weblogic.rmi.cluster.EntityRemoteRef.invoke(EntityRemoteRef.java:115)
    at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
    at $Proxy10.calculator(Unknown Source)
    at com.util.Loader$2.run(Loader.java:811)
    --------------- nested within: ------------------
    weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
    [java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
    id: '15']
    at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
    at $Proxy10.calculator(Unknown Source)
    at com.util.Loader$2.run(Loader.java:811)
    DEBUG util.Loader run:818 - ...model loading from the db in a thread
    done in 297828 ms!
    <16.7.2002 21:56:56 EEST> <Error> <HTTPClientJVMConnection> <
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
    id:
    '15'
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPClientJVMConnection.java:406)
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConnection.java:296)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    -Ohto

  • "Tunneling result not OK" error

    With Weblogic 6.1SP1 on Windows 2000, I see the following error once in a
    while.
    At the client, I get the following:
    -----------client-side error stack begin-------------
    weblogic.rjvm.PeerGoneException: ; nested exception is:
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
    id:
    '18'
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD', id:
    '18'
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPCli
    entJVMConnection.java:406)
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConne
    ction.java:296)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ----------client-side error stack end-----------------
    Meanwhile, at the server, the wl-domain.log has the following stack trace:
    ----------server-side error stack begin-----------
    ####<Nov 11, 2001 7:11:20 PM CST> <Error> <ConnectionManager> <[Hostname]>
    <[Managed Server Name]>
    <ExecuteThread: '14' for queue: 'default'> <> <> <000000> <>
    java.rmi.UnmarshalException: Incoming message header or abbreviation
    processing failed ; nested exception is:
    java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
    Start server side stack trace:
    java.rmi.UnmarshalException: Incoming message header or abbreviation
    processing failed ; nested exception is:
    java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
    java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
    at
    weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.j
    ava:182)
    at
    weblogic.rjvm.MsgAbbrevInputStream.readMessageContext(MsgAbbrevInputStream.j
    ava:154)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:582)
    at
    weblogic.rjvm.http.HTTPServerJVMConnection.dispatch(HTTPServerJVMConnection.
    java:359)
    at weblogic.rjvm.http.TunnelSendServlet.service(TunnelSendServlet.java:25)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2456)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2039)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.Kernel.execute(Kernel.java:229)
    at
    weblogic.servlet.internal.WebAppServletContext.dispatch(WebAppServletContext
    .java:2352)
    at
    weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
    521)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ----------server-side error stack end-----------
    This is not easy to reproduce - I've only seen it about once a day during
    extended
    performance stress tests, which complete most of the time successfully.
    Any idea what these errors mean? Is there some tuning I can do to make them
    stop?
    I've already tried setting the ThreadCount to 10 and the
    PercentSocketsReaders to 60
    on the client command line, based on advice we got from BEA, but I've seen
    this
    particular problem whether I set those parameters or not. I had not seen
    this problem
    before switching to Weblogic 6.1 from 6.0.
    --Rajiv

    I have the same problem. Any hint? Is it a bug? There is some fix?
    Angelo
    "Michael Gogins" <[email protected]> wrote:
    >
    We have had a similar problem with tunneling JMS publish/subscribe through
    HTTP
    and HTTPS to get through firewalls. The JMS connection drops, and cannot
    properly
    be recovered.
    Can anybody tell me if they have also had this problem with tunneling
    other protocols
    such as RMI or EJB?
    In other words, does anybody know what layer of the protocol stack causes
    this
    problem?
    Also, needless to say, does anyone have a workaround or solution?
    "Rajiv Jauhari" <[email protected]> wrote:
    With Weblogic 6.1SP1 on Windows 2000, I see the following error once
    in a
    while.
    At the client, I get the following:
    -----------client-side error stack begin-------------
    weblogic.rjvm.PeerGoneException: ; nested exception is:
    java.net.ProtocolException: Tunneling result not OK, result:
    'DEAD',
    id:
    '18'
    java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
    id:
    '18'
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPCli
    entJVMConnection.java:406)
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConne
    ction.java:296)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ----------client-side error stack end-----------------
    Meanwhile, at the server, the wl-domain.log has the following stacktrace:
    ----------server-side error stack begin-----------
    ####<Nov 11, 2001 7:11:20 PM CST> <Error> <ConnectionManager> <[Hostname]>
    <[Managed Server Name]>
    <ExecuteThread: '14' for queue: 'default'> <> <> <000000> <>
    java.rmi.UnmarshalException: Incoming message header or abbreviation
    processing failed ; nested exception is:
    java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
    Start server side stack trace:
    java.rmi.UnmarshalException: Incoming message header or abbreviation
    processing failed ; nested exception is:
    java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
    java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
    at
    weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.j
    ava:182)
    at
    weblogic.rjvm.MsgAbbrevInputStream.readMessageContext(MsgAbbrevInputStream.j
    ava:154)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:582)
    at
    weblogic.rjvm.http.HTTPServerJVMConnection.dispatch(HTTPServerJVMConnection.
    java:359)
    at weblogic.rjvm.http.TunnelSendServlet.service(TunnelSendServlet.java:25)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2456)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2039)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.Kernel.execute(Kernel.java:229)
    at
    weblogic.servlet.internal.WebAppServletContext.dispatch(WebAppServletContext
    ..java:2352)
    at
    weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
    521)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ----------server-side error stack end-----------
    This is not easy to reproduce - I've only seen it about once a day during
    extended
    performance stress tests, which complete most of the time successfully.
    Any idea what these errors mean? Is there some tuning I can do to make
    them
    stop?
    I've already tried setting the ThreadCount to 10 and the
    PercentSocketsReaders to 60
    on the client command line, based on advice we got from BEA, but I've
    seen
    this
    particular problem whether I set those parameters or not. I had notseen
    this problem
    before switching to Weblogic 6.1 from 6.0.
    --Rajiv

  • Why is my cache results not highligted anymore?

    why is my cache results not highligted anymore?

    When I do a word/s search.
    Normally the words I typed and searched on Google will be highlighted in different colors each word at the top of the webpage.
    The same color will be highligted for each word/s whenever they appears all throught out the page. when I open it as cached.
    Now the words don't highlight any more and no color even.
    Here below info from About.com about what I am asking about:
    http://google.about.com/od/searchingtheweb/qt/cache_syntax.htm
    ''''''Highlight Keywords With Google Cache Search''''''
    Find Specific Information Faster With Google's Cache
    By Marziah Karch, About.com Guide
    Is it hard to find a specific piece of information on a large Web page? You can simply this by using Google's cached page to highlight your search term.
    As Google indexes Web pages, it retains a snapshot of the page contents, known as a cached page. When a cached page is available, you'll see a Cached link at the bottom of the search result.
    Clicking on the Cached link will show you the page as it was last indexed on Google, but with your search keywords highlighted. This is extremely useful if you want to find a specific piece of information without having to scan the entire page.
    Keep in mind that this shows the last time the page was indexed, so sometimes images will not show up and the information will be out of date. For most quick searches, that doesn't matter. You can always go back to the current version of the page and double check to see if the information has changed.

  • When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

    when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

    Hi Eriksimon,
    Firstly, thanks for your message.
    What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
    I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
    I bounced my work to MP3 with highest BIte Rate.

  • Not the Average "sound quality" post

    I import using Apple losless converter. I am aware of the general manufacturing specs that allow my speakers to sound like Rice Crispies, (which is generally lame.) This being said, I move forward to my point.
    All of my low end frequencies distort, but NOT just through my speakers. It is extremely noticable even when using high grade head phones, so what's the deal here? I get the same distortion but to a lesser degree when I export to my Ipod nano, using high end head phones, which do not distort, on the nano as well. I have a 60 gb Ipod video which is formated for windows that has the same CD's imported at the same time (i.e. ruling out disc failure) which does not suffer sound degradation. Please help!

    i've been looking for similar problem which i have...
    i just updated Itune7.2 to Itune7.3 and all music files has been ****** up in my itune library....
    then i installed 7.2 but still my music files are ******...
    its sounds like can't handle bassline... which has nearly dying.. very quiet.
    and high quality sound is a bit distorted. and try to play around 192kpbs-320kpbs... only bassline or low sound can't handle to catch up with high sounds.
    but i found out that all happening was.. when i used my headphone sounds quality was ****. and i switched speaker (after i read this post ) it sounds all right ... and i put my headphone is back... its all sorted.
    how weird! it might need a time to settle down for iTune7.2
    or something problem with plug-in settings in mac.
    *headphone - audiotech ATH-Pro6(its getting old but still works well )
    *speakers - logitechZ3( good work )
    i think somehow something effected to on your itune library.
    have you upgraded your iTune recently ? stay in 7.2 if you can.
    and try to plug in/out with your headphone jack or speaker jack.
    to let to know your mac.and restart as well.
    there is some people has problem about iTune library after upgrade to 7.3
    not complaine about sound quality but still something going on in iTune library.
    i wanna listen to good quality sound with my lovely headphones.

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

Maybe you are looking for