MDS 9509,9222i & 9234 configuration with HP System Insight Manager

I have enabled the Https(Cimserver) using a dummy ssl certificate. Still my central management server (HP SIM) doesn't recognizes the switch to be a Storage Switch.
when i run the identification query, it stops at " CIM_RegisteredProfile"

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

Similar Messages

Hp system insight manager-device discover issue

Hi,
I have recently installed hp System Insight Manager 7.4. But I can't discover any hp device. The system did not respond to SNMP. when discover any hp device then System Insight Manager showing error:
Major: The system cannot be identified properly for HP SIM to manage;
              unable to get one or more of the following: model, serial number or
              unique identifier (UUID). For management processors, verify the
              system is running the latest firmware. For Linux based operating
              systems, you must have dmidecode installed, enable the
              PermitRootLogin and PasswordAuthentication in sshd, and use root
              sign-in credential. For HP-UX, verify the sign-in credential. For
              Windows, check if WMIMapper is configured correctly on the CMS and
              verify the sign-in credential.
Any ideas on a fix for this?
Thank you,
Nahid

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

HP Systems Insight Manager SNMP Traps not being received

I found the following on HP help....is it any use?Why am I not receiving notification when there is a SNMP Authentication trap received? Solution: The default setting for Enabling Trap Handling in SNMP Extensions is Disabled (Not Processed). The reason for this is because typically, a system can be set up with an incorrect community string or an incorrect community string is set in HP Systems Insight Manager, which results in an Authentication Failure trap to be sent to the management server each time a request is made to the system. This results in many traps being logged. To change this setting to Processed (Enabled), complete the following steps:Open HP Systems Insight Manager (http://machinename:280).Log in as a user with full configuration rights.Select OptionsEventsSNMP Trap Settings. In the Mib Name field, select rfc1215.mib.In...

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Issue while installing HP System Insight Manager on Windows Server 2008

Hi everybody,
as I wrote in the subject, I'm having trouble while trying to update my HP SIM vers. 6.1 to HP vers. 7.1 on my server running Windows Server 2008 Enterprise SP1.
I encounter the errore message:
"HP System Insight Manager Installer detected an unsopported operating system..."
How can I fix this problem?
is it OS really unsopported or Do I have to perform some upgrade before?
is it because of my Microsoft SQL server version? I have the 2005 ver. Do I need the 2008 one?
in anycase HP SIM vers. 6.1 runs with no problem.
Thanks
D

It appears that you have a commercial LaserJet in an enterprise enviornment. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

SAP mibs and Systems Insight Manager (SIM)

I'm trying to get our CCMS to send SNMP traps to our SIM (Systems Insight Manager) server. The SAP side of the setup is pretty straight forward. The SIM side, however, is not so clean.
Hopefully someone has had experience with this, and can either point me at some documentation / blogs that I've not yet been able to find, or just let me know where I've gone wrong.
The SIM server is 64bit Windows 2003, with SIM v 5 SP5.
The base mib pack is 7.70.
I've put the mibs provided by SAP on the SIM server in the mibs sub-folder.
I then ran "mcompile SAP_R3_MIB.txt" at a command prompt and it generated "SAP_R3_MIB.cfg".
Next I ran "mxmib SAP_R3_MIB.cfg" which said it completed successfully.
Yet, when I go into "Options -> Events -> SNMP Trap Settings.." the SAP_R3_MIB is not listed.
I have brought other non-SAP mibs in this way in the past. Is there something special I'm missing?
Any help would be greatly appreciated.

Hi,
I am trying to send SNMP alert from Solution Manager to Tivoli TEC. On solution Manager side log files shows that trapsend was triggered and there was no error. However I do not have any visibility on TEC side which is managed by other team. All i do is when I perform test , i asked them to check if they received anything and they say NO.
I had given them MIBS provided by SAP to TEC team. I don't know what they have done with that but looking at your blog I can tell that you are experienced on the receiving side.
Can you help me to understand the steps they should be performing with MIBS which I gave them. Do they need to change.txt file to .mib as you did. Also what is the way to check if they are receving anything or not? any tool or command at OS level also ?
If you have any document which you created based on your experience, it will be great. you can send it to me at [email protected]

HP Systems Insight Manager - Database questions, what is this database for?

Hello,
I am either missing this information completely in the Installation guide or it doesn't exist, but I am looking for details of the database that HP SIM needs to install.
-I assume this database will be used as a CMS?
-What information will this database be storing?
-If I have multiple HP servers, is it best to put this database on a remote dedicated database server? Will each HP machine that has SIM installed be pointing to this database?
Thanks.

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Vcenter 5.1 use HP SIM (HP Systems Insight Manager)

Hi All Memember
Now i use HP SIM monitoring wanranty of server only but i need use HP SIM check and monitoring hardware of server (vsphere 5.1) .
Phase 1.
I need to monitoring HP Server in HQ , How to intergate HP SIM to vmware esxi ?
Can check hardware and send email to IT ADMIN
Version: Systems Insight Manager 7.0.0 - Windows      Build version:C.07.00.00.00
My VMware Exi
HQ
1 . HP server vSphere 4.1
    have vm 21 guest
Datacenter
                                          Vcenter server
1 HP server vSphere 5.1   2. HP server vSphere 5.1 3. HP Server vSphere 5.1

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - Disk Alerts Not being received

Hello,
I'm not receiving any disk alerts in HP SIM 7.4.0
If I open HP SIM and click on the server that has a disk issue it shows that there is an issue with the disk and has an yellow triangle next to Smart Array controller which is good.
However i am not getting an email alert for it. If I go to Events - Automatic Event Handling - Manage Tasks I have All Events selected as I have only added one server so far so should get alets for everything.
I only get an alert when restarting the server. I should get an email to let me know that there is a problem with the array on the member server?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager

I'm having an issue getting HP System Insight Manger to show/display detail for most of the 30+ proliant servers on the network. See screen capture. What am I missing or need to do?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - login fails

Hi there,
on "HP Systems Insight Manager" i can't login, because my password contains
German special characters like (öüäß).
The version of HP SIM is 7.4.0 on windows Server 2008R2 or Windows Server 2012R2.
Is there a solution?
Thanks in advance Ralf
Hallo zusammen,
ich kann mich beim "HP Systems Insight Manager" nicht anmelden,
wenn mein Passwort deutsche umlaute enthält (öüäß).
Die HP-SIM Version ist 7.4.0 auf Windows Server 2008R2 bzw. Server 2012R2.
Gibt es dafür eine Lösung?
Danke vorab Ralf

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Interop problem between brocade 300d/200e and MDS 9509

Hi, I want to know if mds 9509 can interop with the SAN equipment below.
If yes, can you help me to configure (VSAN and type of ports - TE or T or F).
I tried with the interop VSAN 1 and 3, but there is still no communication.
MDS 9509
kickstart: version 5.2(2d)
system: version 5.2(2d)
and
Brocade 200E or 300D
V6.1.0J

You want Cisco MDS to be the principal switch, this is all explained in the FC standards.
The switch with the lowest wwn becomes the principal switch if the domain priorities set the same.
It is all explained in MDS config guide:
http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664c6a.html
http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664cd1.html#wp1185238

Change Table Fields in "Costing" in with Project System (PPM 5.0)

Dear Gurus;
I need to know, how can I change fields in "Costing" with Project System (Project Management in tab name "Accounting").
The integration works well, but I need to view the values of: Actual, Plan and Commitment.
In the Standard way, just only can see the Plan (with the colum "Costs").
Please, help.
Best regards.
Mariano.
Edited by: Mariano Sabiche on Apr 27, 2011 3:17 PM

Hi Mariano
The particular screen you are referring to will only show the planning on Easy Cost Planning due to the labour costs and revenues planned on the cProject. You can use the services&deatil on the assignment - click on the WBS assigned to get the detailed list of services for the assigned WBS element. You can then click on Detail Data to get detailed data on the assigned WBS element. If you want a report with all the data, best use the BW cubes for that to combine cP and PS data.
Hope this helps
Regards
Duan

How to control permissions in KM using File System Repository Manager

Hello everybody
I have a scenario with 15+ file servers which content needs to be mapped into Portal KM as read-only.
Windows Authentication is configured on the portal, so the users don't need to supply the portal with username/password.
Now the users are of course only allowed to see the same content in the portal as they can see on the file servers. I know that the permission mapping can be done using a File System Repository Manager with W2KSecurityManager, but in that case the users will have to maintain the mapping of rights from windows to portal manually. And with ever-changing passwords this is too big an administrative task. So I am looking for another solution.
My question is therefore:
How can you configure the File System Repository Manager in a way where it the user does not need to maintain "user mapping" manually, but only need to logon to the portal (through windows authentication) and can see the same files from the portal as he/she can see from the file servers.
Can this information in some way be taken from the configured Windows Authentication? Or is the only solution to enable WebDav on the file servers and and follow the "Integration of Windows File Servers into the SAP KM platform Using SSO and the WebDAV Repository Manager"-guide?
Any help will be rewarded.
Best regards,
Martin Søgaard

Hi again Dirk
I just studied the "Integration of Windows File Servers into the SAP KM platform using SSO and the WebDAV repository manager"-guide in depth and I don't quite understand what rights the cmadmin_service and notificator_service are supposed to be given in the Active Directory. In the guide it says:
"A number of global services and repository services need to perform operations on resources in various repositories. For example, the index management service must read all resources it is meant to index. When an index is created, the service user index_service is used. Therefore, this user has to have at least read access to all repositories that are to be indexed. Other users that are used by the SAP KM platform are the service users notificator_service and cmadmin_service. When a search is taking place, it is the user that is currently logged on to the portal."
I dont quite understand what the two service users are doing but more importantly, I need to give the two service users the correct permissions in the Active Directory (or through user mapping). I understand that index_service only needs read_only permissions, but what permissions should the cmadmin_service and notificator_service be given?
Best regards,
Martin

File System repository manager

Hi All,
I am working on configuring a File System Repository Manager. I followed the documentation at
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/content.htm
and
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
I made all the configurations and also restarted the portal still do not see the repository in the KM content under root. We are on Netweaver Portal 7.0 on AIX 5.3/DB6, Shared drive is on Win 2003 OS.
Here are the some details on the configurations I made:
Network Path:
jCIFS Protocol: Active
Description: Documents on Shared Drive
Network path:
<IP Address>\public\temporary
password: ***********
USer: Domain\User
File System Repository:
Description: Documents on Shared Drive
Prefix: /abcdef
Root Directory: //<IP Address>/public/temporary/FileShare
Security Manager:AclSecurityManager
ACL Manager Cache: ca_rsrc_acl
Read Only: Not Active
Please advice - thanks -sm
Edited by: sm on Oct 24, 2008 4:34 PM
Note: EP and Share Drive are on the same domain.

Hello sm,
You can monotor your repository manager cofiguration, whther it has been activated or not.
It should show in green symbol if it has been correctly configured and active.
Goto system Admin>monitoring>KM>Component monitor>Repository managers-->Check ur repository.... Green color indicate is working fine...
Red color indicate error...
you can check your configuration for the repository.
Example configuration of a UNIX file system repository manager:
Name                = fs_rep_unix
Localroot           = /usr/company/share
Prefix              = /company-share-unix
Read Only           = deactivated
Send Events         = activated
Repository Services = properties, rating
ACL Manager Cache   = ca_rsrc_acl
Security Manager    = AclSecurityManager
You can check your Local root i.e. your Root directory. The format should be correct as given in the example.
Don't foget to appreciate, if helpful!!!
Regards
Manisha

ESS-portal integration with Time and Travel management(HR) in R/3

Hi,
Im doing with ESS-portal configuration with Time and Travel Management in R/3,So please kindly send me Documents for integration part.I'll b so thankful if u people send me docu as soon as possible.
send me documents to [email protected]
thanks
pavi

Hi
Please go through this functional module HRMS_BIW_EXTRACT_PY1 in r/3 side to know the exact table where u r getting the data.
There are lot of tables involved in HR-payroll info types.
As far as your problem is concerned you take one employee and go to PA20 and analyse the payroll for each week or twice a month (depends up on ur client)
run the report on the payroll cube and find out exactly what u want.
Thanks
Roopa
Assign points if help full

MDS 9509,9222i & 9234 configuration with HP System Insight Manager

Similar Messages

Maybe you are looking for