Mds error in console when saving document

Hello
I keep having this error in the console every time I save a document I am working on.
mds[39]: (Warning) FMW: event:1 had an arg mismatch. ac:2 am:51
Can I just ignore it since it's seems related to spotlight or can it be document corruption.
Save as, etc.. does not fix the problem.
Best
Yan

After getting this mds warning message every time I save my document, the file showed a some point a very strange behavior in the finder.
The file appears in it's container folder normally but then disappears by itself after a second or so.
Clicking in another folder and then back to the first folder brings back the file for a few seconds then it disappears again. I have never seen anything like this.
I looked into the folder with "ls -la" in the terminal, and the file was renamed "--" instead of it's original name.
Here it is in path finder :
fsck -fy shows no problem
onyx cache cleaning, etc.. no problem
virus check : no problem
spotlight index rebuilted.
This appends with this file even after save as, etc..
I am a bit worried now. I have backups of this current work file, but the mds warning keeps coming out at every save.
Yan

Similar Messages

When saving documents in PDF format a .txt document is also created and saved

When saving documents in PDF format to the my documents folder on a PC a .txt document is also created and saved, does anybody know the where the setting is that allows this functionality (duplicate document in txt format) to be switched off thanks.

When saving documents in PDF format to the my documents folder on a PC a .txt document is also created and saved, does anybody know the where the setting is that allows this functionality (duplicate document in txt format) to be switched off thanks.

Pop up message when saving document with document set

Hi
I want to display a pop up message when a user saves a document of a particular Content Type in a document set.
How can this be done ?
Thanks

Hi,
According to your post, my understanding is that you wanted to pop up a message when saving document.
To achieve it, you should custom the edit form page.
You can use the SharePoint Designer
to customize the behavior of the "save" button.
You should add the "onclick" method to the submit button, and put your JavaScript there.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9d830f96-693a-438d-a5c8-005d1e86b578/how-to-show-a-popup-box-before-saving-properties-for-a-document-in-document-library?forum=sharepointdevelopmentlegacy
You can also use the event receiver, when the files have been uploaded or edited to call the event receiver to open a pop up dialog.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Error in BP when saving a transaction type

Hi Gurus!!! first of all merry xmast!!!
I need you help since I cannot see where the error is. I am using CRM 7.0 and in the UI when saving a transaction I get the following errors "The region 00 is not defined for country" and "The country is not set". I have made the following verifications:
UI
--> Assingment Block: Parties involved I have checked that both the customer and employee responsible have the country and region
--> The transaction type used does not have the field "country".
GUI
--> PPOMA_CRM: I checked that the organization has the country set.
-->BP :I double checked that the BPs customer and employee responsible have the country and region assigned.
What`s wear is that I seem to be the only one who has this error so I`m reallly confused on how to solve it.
Please help me,
Thanks a lot!!!
Regards,
Lorena.

Hi,
Is this happening for all the types of Transactions like Sales, Service, etc.? Is that data that you are using is proper? And can you check if the countries are properly maintained in the system? Check if the country is a mandatory parameter or some country specific checks are executed in the system.
You can check for the countries in the System from transaction code - SPRO -> SAP NetWeaver -> General Settings -> Set Countries -> Specify Countries for mySAP Systems.
Hope this will help.
Thanks,
Samantak.

When saving document why can't I here a sound conforming that

When saving a document in pages why can't I hear a sond conforming the save.

I have never heard a sound when saving in Pages. I have used Pages the last 6 years.

"This file cannot be found" error message when saving document

Hello,
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - http://screencast.com/t/W1GYK0zsrk
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc.
Please HELP!! I can't shutdown my station until I get the document to save.

Yes, Mohit1233 - it happened with every file yesterday. Finally, I closed the doc (forcing me to lose my work), then restarted my computer and today the problem is gone. I'm working on a PC (HP);
Barblove - I tried doing that yesterday (copying and pasting into a new doc), and still nothing. I also tried copying the work into a CS3 doc (but got an error message).

"I/O Error when Saving Document"; "PreflightLib.dll file missing or corrupt"

These error messages are received when trying to Save the document. The document has Typewriter entries and added/replaced pages. I have done this action almost every day for the past year without any problems. Now it occurs on 2 different computers. I have cleaned my registry and searched to see if I deleted or moved the ".dll" file - no luck. What to do? Work depends on the Acrobat program. Please Help.

Hi dhults,
Please follow these steps to manually re-register PreflightLib.dll file through command prompt:
Click the Start button.
Type "command" in the search box... DO NOT hit ENTER yet!
While holding CTRL-Shift on your keyboard, hit ENTER.
You will be prompted with a permission dialog box.
Click Yes.
Type the following command: regsvr32 /u PreflightLib.dll.
Hit ENTER. This will UN-REGISTER your file.
Type the following command: regsvr32 /i PreflightLib.dll.
Hit ENTER. This will RE-REGISTER your file.
Close the command prompt window.
Re-start the program associated with PreflightLib.dll error.
If still an error occurs, then you may need to repair Acrobat. For that, go to Help menu and click 'Repair Acrobat Installation'.
I hope this will help you.
Regards,
Anubha

Error message when saving document

I'm new to Acrobat. I'm trying to save a file, I get the error message " document could not be saved. a file error has occurred." how do I fix that?

Have you tried using Save As to another file name? If so, let us know and there might be a solution at hand.

When saving documents from word 2013, the save as dialog shows the default path under "other web locations"

it used to be in the gold ole days of sharepoint 2010 and office 2010 that when I created a document in sharepoint and saved it I would get a dialog, like this (see below) I have also attached a screen shot of the 2013 save dialog (when you save
a document for the first time).
I find it strange that the user actually has to select their "Current Folder" and also that it shows in the dialog as "other web locations" Why can't it be like in the 2010 days where it automically selects the correct location
and the user just hits save. And why does the sharepoint location show up as an "other web location". Is there anything that can be done (through office registry settings or another way) to make this less confusing for our users???
now when I do this in office 2013 I get a dialog like this:
krd

Hi kdube,
I test in SharePoint 2013 again, When I created a new document library and created a first document and clicked save as, I got a same dialog with you that "Current Folder" was under "other web locations".
But when I created a second document and from then on, when I clicked save as, I got a same dialog with myself that "Current Folder" was under "SharePoint".
As I have said, Actually, web locations contain Microsoft SkyDrive and SharePoint libraries. Even the default path under "other web locations", it will not affect the Save As function.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

How can I disable "download error" dialog box when saving a complete web page?

Sometimes, when I try to save a web page as type: "Web Page, complete", firefox displays download error dialog box stating a file "could not be saved, because the source file could not be read."
I don't have a problem with firefox couldn't save that file, but I have a problem with firefox displaying that dialog box, because I have to click OK everytime.
Is there a way to disable that annoying dialog box?

I modified the host file mainly to block ads. But that's not the problem. It's OK for me for firefox to not saving some parts of a page (ads usually within a frame). It's my intention to NOT saving those files. I just want to save the main content of a webpage.
But I'm having a problem with firefox displaying the dialog boxes.

"error while printing" when saving

A really odd thing started happening today: when I hit Apple + S to save a document, it first pops up the save progress box, but after a few seconds a 2nd box appears with a mesage saying "Print. error while printing."
I'm just trying to save, not to print. Any ideas what's going on?

on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
PMSessionValidatePrintSettings failed (error code = -50)
Invalid PMPrintSettings in print info
this same n-s-p works fine on my g4 powerbook, also 10.4.11...
and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

Odd error message given when saving a file to a secondary drive.

I am running Photoshop CS3 Extended on a Windows XP Pro, with SP2 installed. The computer has two hard drives installed. On all previous versions of Photoshop I've been able to save a file to my 2nd hard drive easily by typing "D:\image.jpg"
When I try to do the same in Photoshop CS3 I get an error message that says "could not save as d:\d:\image.jpg because the file name was invalid"
So I have to hit SHIFT+CTRL+S then type "d:\" and then type a file name, making it a 2 step procedure to save a file now. If I don't follow this procedure, and just type the filename it saves the file on drive C:\ in a subdirectory.
Obviously it's a path error, but I've never had a problem with a straight out command "D:\image.jpg" on previous versions and looking at the Preferences options or doing a search for this error didn't shed any light on this issue. Thanks for any feedback on this problem.

i "could not save as d:\d:\image.jpg because the file name was invalid"
It seems that the "explorer" function is already set to drive D:\, as evidenced by the error message. If the file came from D:\, or you have been saving to D:\, then you will not type "D:\" into the file name, as both the ":" and the "\" are forbidden characters.
As a test, Open a file from C:\, then Save to C:\. Now, Do a Save_As and try typing "d:\image.jpg." It should do this, without the error message.
Just a note: you may have simplified the path for your post, but otherwise, it's not a good practice to save any file into the root of a drive - always do a folder. If this was for done as an example only, then ignore my caveat.
Hunt

Why does Illustrator CS4 merge layers when saving document?

Woking in Illustrator CS4, I have a document with four layers. The first three contain (1) Background (2) Background effects (3) Pictures and the (4) contains text. When I save the document and then re-open it, all the layers have been merged into the latest, 4th layer. All the previous layers are empty. It's as if everything has been grouped into the text layer, no element can be independently selected, and it is therefore impossible to do further work on the document.
Can anyone tell me why this is happening? Am I not saving this correctly?
And even more important, is there any way of restoring the different layers once this has happened?

Can anyone tell me why this is happening? Am I not saving this correctly?
Well, to what format are you saving? The native AI format should always retain layers. Other formats such as EPS or older PDF Levels may indeed enforce flattening. also make sure you are not confusing layers with groups/ objects. There's a crucial difference between the two.
And even more important, is there any way of restoring the different layers once this has happened?
Well, you can manually add new layers and drag&drop your objects and groups into the new layers in the layers panel, but if you save it again to the wrong file format, that is wasted effort, so for the life of it make sure you get that figured out first.
Mylenium

Management Point created using Powershell will error CM Console when viewing properties

Greetings,
We have an established ConfigMgr 2012 R2 CU3 environment with several Primaries and management points already active. These were all installed manually using the CM Console.
I am now trying to add additional Management Points using Powershell using the command:
Add-CMManagementPoint -enablessl -sitecode "ABC" -sitesystemservername "MPservername.domain.com" -allowdevice -clientconnectiontype internetandintranet -generatealert -verbose
The PS completes without error, the MPSetup.log and MPControl.log indicate all is well once the setup completes
The MP appears as a component under the Server when viewing in the console
The IIS logs show clients communicating fine and the CM component Status monitor is all green with no errors showing in the status message
A Get-CMManagementPoint returns fine showing all the same details as other working MP's
However if I try to view the properties of the Management Point from the console, the console will error
If I click Continue it will open the properties but they don't appear correctly. The "sitedatabase" tab is missing and the mobile device and generate alert boxes aren't selected. If I click Quit the then console crashes.
So everything appears to be working, except for being able to view the actual properties through the console.

It doesn't appear to give a specific error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.ManagementPointConnectionsControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnLoad(EventArgs e)
at System.Windows.Forms.UserControl.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.ControlCollection.Add(Control value)
at System.Windows.Forms.TabControl.ControlCollection.Add(Control value)
at System.Windows.Forms.TabControl.TabPageCollection.Add(TabPage value)
at Microsoft.EnterpriseManagement.ConsoleFramework.SheetFramework.AddTabs()
at Microsoft.EnterpriseManagement.ConsoleFramework.SheetFramework.OnLoad(EventArgs e)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
Followed by lots of entries of the loaded dll's and finished off with
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

IDVD09 Multiplexing Error formating disk, when saving to a disk image

I am able to burn a disk but when I to to save a disk image, after four hours of churn, when it goes to write the image, I get " Multiplexing error in formating disk" and iDVD quits. This is a real pain and very time consuming and happens every time I try to save a disk image from the project. Any ideas on how to get around this would be appreciated.

I am up to latest software 10.5.6/ I am saving disk image to internal 450 GB drive. I found that I was suprisingly low on empty space (14GB) that might have been my problem. I recently uloaded a buch of video (like almost 3 hours, did not realize how close I was to being ful!I will post here tomorrow after I go the 5 hours again to make another pass at the Disk image!

Mds error in console when saving document

Similar Messages

Maybe you are looking for