Mds95xx device manager for os 5.2.8a and above

Hi
I am looking into Cisco site for Device manager download for os 5.2.8a or above.
Someone can help me?
Many thx
Walter

Hi Walter,
There are two ways to get Device Manager.
(1)Install DCNM and DM will also be installed.
(2)Point your browser at the IP address of the switch and download it from there. Then run the "jxpiinstall.exe" file to install DM. However, to install it from here, you must have Java 1.5 and 1.6 or you will just get a "Certificate Revoked" message.
Best regards,
Jim

Similar Messages

Free CiscoView Device Manager for Cat6500

Cisco Systems® announces the CiscoView Device Manager for the Cisco® Catalyst® 6500 Series Switch, Cisco Content Switching Module (CSM), and Cisco Catalyst 6500 Series SSL Services Module (SSL SM). CiscoView Device Managers are three management applications embedded in these products to offer extensive GUI-based feature management within a single chassis. For more information and to download these applications, visit www.cisco.com/go/cvdm

If you use the old link:
http://www.cisco.com/cgi-bin/tablebuild.pl/css11500-crypto
You'll get redirected to CVDM for the CSS11506. It's the same CVDM software as the CSS11501 and CSS11503. Don't know why only the CSS11501 link is broken.

How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Firefox is available for Android phones (2.0 and above) / LG ALLY?

Firefox is available for Android phones (2.0 and above)...
Have you tested it on LG ALLY?

See the link to '''supported devices '''on this page: http://www.mozilla.com/en-US/mobile/download/

[t431s] Code 28 in Device Manager for all external storage.

I'm using Windows 8.1 on a t431s. I'm having this problem where none of my external storage is being recognized. Under "Device Manager" any sort of external storage I plug in ends up under "Other devices". When I click on the device, I get Code 28 "The drivers for this device are not installed." Trying to update the driver brings me nowhere. The devices don't appear under disk management.
What's weird is that other USB peripherals such as mice and USB headphones don't have any problem.
Here's what I've tried so far:
Updated the BIOS.
Used Lenovo's SCCM package for Windows 8.1
Tried installing the individual drivers for each hard drive.
Nothing works! What's going on here?
Thank you in advance for any suggestions.
Solved!
Go to Solution.

Hi, Buggy
After doing a bit of research. It seems your not the only one with this issue. WD has had this issue with even Windows 7 since 2012 with other Passport models.
I honestly recommend seeking support with WD about this issue if you have not done so already as the ones who where able to fix this issue did so with updated drivers from WD.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

HP Device manager for C6100 series on macbook freezes after 1.1.1 update

Okay, I had this same issue on my Powerbook after the hp 1.1.1 update for my C6100 Photosmart printer/scanner and I Googled the answer but didn't save it - I now have the same issue on my MacBook Pro. When I try to scan via the HP Device Manager I get an error "the program may be unstable, it is recommended that the program be closed and restarted"
I know the resolution is to remove the 1.1.1 update but I can't remember how the heck to do this... anyone? Help! I know it's super easy and I'm stuck.
Thanks all!

That doesn't work. I ended up just using the uninstaller and removing the entire thing and then by the CD I reinstalled it again so it doesn't have the update 1.1.1. Of course it asks if I want to update when the updater runs I deselect it. Now I remember there is a simple way to make it skip this update every time too so I don't inadvertently install it again but I don't remember that simple task either.

Search in device manager for driver updated on a certain date.

How do I search for a driver I updated on 06/13/2014 so I can roll it back ? I can't remember which one it is. I was trying to download a game. The update slowed my machine way down and the print is much smaller.

Hi,
I’m sorry to tell you that you can’t find the driver in Device Manager by the way you said.
You can open Control Panel\System and Security\Windows Update
and click View Update History, then find the update according to
Date Installed.
Also you can start computer and typing F8, then click
Repair Your Computer to perform System Restore to fix this issue.

Device manager for 6500

I just transferred a 6500 officejet from a Mac laptop to my Windows XL pc.
I noticed that on the laptop there was a HP Device manager at the bottom of the desktop area, but there is not one on the pc, either in the system tray or HP folder.
Since the installation disc was not available, I downloaded the needed software from HP's website.
How do I get the Device manager onto my pc?
Thanks
This question was solved.
View Solution.

Hi,
The HP Device Manager is the software for Macintosh computers only.
From the Start menu select Programs > HP > HP Officejet 6500 and open the HP Solution Center program, that is the one available on a Windows PC for your printer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Device manager for E 63 ???/

what is the concept of the Device manager ? how it is useful to theuser. how to configure? plz reply soon

Hi there, I see you have asked several questions regarding your E63. Have you considered to read the User Manual that you received with your phone?? Or if you have lost or misplaced it, download the PDF version from your regional Nokia website (in this case, Nokia India). It would save you a lot of time and hassle to read the manual.
To answer your question quickly, Device Manager is where the current firmware version of your phone is displayed, and where you can check online for firmware updates (if your device supports Firmware Over The Air, as E63 is FP1 phone I am not sure that it does). You usually do not need to configure the settings as the settings to connect to Nokia servers are usually pre-installed.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Unknown Device in Device Manager for Lenovo G780 laptop, Windows 7

Hails all. I am trying to figure out what the Unknown Device is under Other Devices in my Device Manager. I recently got rid of Windows 8 and put Windows 7 64-bit on my Lenovo G780 laptop. I installed almost everything from the Lenovo site --- all of the drivers and such, software, etc. I cannot figure out what this device may be. The only external device connected to the laptop is a Kensington usb mouse. Any ideas?
I did run the PCI test program and the Motherboard test program that Lenovo provides and it didn't find any errors. Windows Update hasn't found update/driver/software for the Unknown Device. The Lenovo Solutions software only tells me to open Device Manager.
Link to picture
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums
Solved!
Go to Solution.

Welcome to the forum!
Since Windows Update didn't pick up any missing drivers, I'm guessing you are missing a driver for a device that would be propriatary to Lenovo. During the installation of Windows 7, did you install the One Key Recovery software ? If not, the One Key Recovery button maybe triggering that exclamation mark in Device Manager since there is no driver to tell Windows what to do with that button.
If that wasn't the problem you can try running Unknown Device Indentifier to see if that utility can indentify the unknown device. The free program can be found at the link below........
http://www.zhangduo.com/udi.html
OR
Use the Direct Download link at...........
http://download.cnet.com/Unknown-Device-Identifier/3000-2086_4-42618.html
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

15-g092sa - yellow sign in device manager for "PCI Device" (win7x64). Missing chipset drivers

Hi, I just installed Win7 64 Pro - very happy with the machine, it's all crisp and light.
My device maneger reports a missing driver for PCI Device. I can't tell what's missing exactly, the laptop works fine.
I noticed the chipset driver was missing for Win7. For win8.1 it was an Intel driver (?!?, The laptop is an AMD A8).
Was wondering if you can pitch in some info about what is missing and how do I install it.
Thanks
This question was solved.
View Solution.

Hi:
You need this chipset driver for your model. Install and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
You need this driver for the PCI dev. DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

Device Manager for IDS/IPS 4215

I am trying to view my IDS throught the web browser Device manager but am having trouble. I configured the sensor through the CLI. We are using the standard/default port 443. When I enter the https://ip address all I get is "can't display web page" . Does anybody have any tips or something I might have overlooked.
Thanks

Do you have Java runtime enviroment enabled
Maybe IDM access is not working thanks Java problem
Try following download java 1.4.2_07
https://sdlc5b.sun.com/ECom/EComActionServlet;jsessionid=5BED10CBB25347782DC40CB6AE5ECDF1
Download and install
M.

I can't access "Device Manager" "MMC" "CMD run as administrator" and some .exe files

<p><img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560661" /></p>
<p><img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560666" /></p>
I need help! I am in hurry.

Hi,
Sorry for my delay.
Based on your description, I’m a little confused with your issue. Would you please let me know more details
of this issue? Thanks for your understanding.
Would you please let me know OS edition information of this problematic server? Did you logon the server via
an administrator account? Meanwhile, would you please let me know the complete error message when access Device Manager, MMC or other .exe files?
For CMD, please open Task Manager, click File and select
Run new task. Then type CMD and select Create this task with administrative privileges option in
Create new task wizard. Will you still encounter issue?
By the way, I type above links which you provided in IE. However, I can only find
Page Not Found error. You can upload screenshots to
OneDrive and then post link here. (Please hide all protected or private information)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

TS1702 Anyone know how to get ipad 3 to get unstuck while its updating? My device froze for over a week now and cant access any of my documents cos of it and my uni assign due next mon. Help

My ipad 3 wont allow me to use any app that is 'updating' , im sure its frozen cos its been a week and still not finished updating. Worse part is,my uni assign is on pages and its due, and i can no longer access ANY doc on my ipad. I will fail my double unit for sure, destroy my gpa, and lose $5000 - the cost of the unit of study. Help fix this please.

Well, that got me part way there. When I typed
      /usr/local/bin/snort -?
I got
      dyld: Library not loaded: /sw/lib/libpcap.0.dylib
        Referenced from: /usr/local/bin/snort
        Reason: image not found
      Trace/BPT trap
so back through the same fire drill I went, this time with
      fink install libpcap
and finally, when I typed (again)
      /usr/local/bin/snort -?
I got
      /usr/local/bin/snort -?
       ,,_ -*> Snort! <*-
       o" )~ Version 2.4.0 (Build 18)
       '''' By Martin Roesch & The Snort Team: http://www.snort.org/team.html
       (C) Copyright 1998-2005 Sourcefire Inc., et al.
      USAGE: /usr/local/bin/snort [-options] <filter options>
      Options:
       -A Set alert mode: fast, full, console, or none (alert file alerts only)
                   {snip}
              -Z Set the performonitor preprocessor file path and name
              -z Set assurance mode, match on established sesions (for TCP)
              -? Show this information
      <Filter Options> are standard BPF options, as seen in TCPDump
So I made it! (I think) -- now, to figure out all the command line configuration parameters for the snort.conf files, and how to make it launch at startup....
Thanx, Gary!
j.v.

Device manager for multiple phones

I smashed the Bold now using my old 8700g. How do I connect to desktop manager given I dont seem to be able to load 2 versions of software. Also guessing which software was right ie 4.1 ?
Thanks David

Desktop Manager are not specific for any BlackBerry device. They can be used for all the devices available. Current version 4.7 is the newly released one. You shlud be able to use your desktop manager with 8700g.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Mds95xx device manager for os 5.2.8a and above

Similar Messages

Maybe you are looking for