MDT 2012 'Failed to save Environment to (80070057) Error during Windows 7 x64 Pro Deployment
Hi There,
I've been using MDT for a little while now, but I'm having problems successfully deploying an image to a batch of new laptops. The laptop HDD's are completely blank, and I am PXE booting using an x64 Litetouch Image via WDS. I have successfully captured
my image from a reference laptop (the same model that I'm trying to image), and I am now trying to deploy it using a standard client task sequence.
The 'Install operating System' phase seems to go ok, but then sits for quite some time at the 'Applying Unattend.xml' stage, then eventually, I get a general error 'Task Sequence Failed - 80004005'. I then exit MDT (it doesn't reboot as it should), and let
the laptop boot, which it does, and logs straight on into Windows, but gives me error along the lines of 'can't find the litetouch script', which I assume means MDT hasn't been able to copy it across. The laptop is however joined to our domain, and I pretty
much just have to tick the 'require a password to log on to this computer' box in user accounts, and all looks ok.
So in summary, the image is applying, but the laptop is not rebooting and running the final cleanup scripts.
I have already changed the SATA mode to IDE, instead of AHCI, having read this sometimes causes problems. I also read that systems with UEFI BIOS can also cause problems with MDT, but I'm not sure if this is the case.
I have edited my customsettings.ini, to copy log files back to my server, which it has done for me. Having looked at the logs (with CM Trace), I can see these errors:
Failed to save environment to (80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to persist execution state. Error 0x(80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save execution state and environment to local hard disk
TSManager 26/03/2014 15:48:09
1820 (0x071C)
The task sequence execution engine can not reboot the machine because we failed to persist execution environment
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Fatal error is returned in check for reboot request of the action (Restart computer).
Unspecified error (Error: 80004005; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
An error (0x80004005) is encountered in execution of the task sequence
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Task Sequence Engine failed! Code: 80004005
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Any help you can give me would be great, as I'd like to get this process running properly.
Thanks,
Sarah
You don't mention what kind of OS this is (Windows 7 Pro x64?)
This is a known issue/FAQ.
I would recommending using MDT 2012 (update 1) for UEFI machines.
Machines with uEFI 2.3.1 only support Windows 8.x.
http://technet.microsoft.com/en-us/library/hh824898.aspx
Recomendation: Convert the BIOS to CSM and/or upgrade to Windows 8.1 :^)
Keith Garner - keithga.wordpress.com
Similar Messages
-
Failed to save library - an Unknown Error Occurred
I have iTunes 10.7.0.24 running on a Windows 7 64bit (Dual 3.07Ghz 2GB RAM) VM. My library has 18,376 songs, 636 movies, 2,328 TV Shows, and 194 apps. iTunes is providing content to 3 Apple TV's, 3 iPhones, 1 iPad, and 1 iPod. Occasionally(several times a year), when adding or deleting content I see the message 'Failed to Save Library - an unknown error has occurred'. When this happens the iTunes process is generally using around 400-500MB of memory. The system always has at least 1GB of available memory (above that being used by the system and iTunes). The computer does nothing else except run iTunes. If I restart iTunes memory consumption drops to around 120MB. So far I have not found any errors (i.e. files I added are there and files I deleted are gone).. I currently have 933GB of free space on the disk storing the files and library. There are no backup processes running on the PC (Backups are timed to occur at night when the system is idle and are processed by a server that hosts the iTunes Media disk). I am using Microsoft Security Essentials on the PC. The network connection between the iTunes PC and Server hosting the media disk is 10GB (sic).
Does anyone else see this error or know what could be causing it? My current thinking is the problem is updating the library XML file (currently just over 33MB).Use the Rebuild command. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Rayhttps://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4) -
Logon failed. Details: mscorlib (Crystal report error during print &export)
Hi,
I'm encountering the problem that the crystal report is working fine in the staging server I developed.
However, after I transported to live server the report having problems when printing and exporting.
Below is the error message prompts to me.
Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\rptPrintSummaryConfineSpace.xml'. Error in File C:\WINDOWS\TEMP\rptPrintSummaryConfineSpace {2D72226E-816A-4D9B-BF93-C9077001F09C}.rpt: Unable to connect: incorrect log on parameters.
I hit this error when I click OK button on export or print option page.
My temp folder at windows is given full permission for IIS_WPG and ASPUSER.
Please help to resolve my problem thank you very much.What version of Crystal Reports?
What CR Service Pack are you on?
What is the database?
How are you connecting to the databse (ODBC, OLE DB, etc.)?
- Ludek -
I am running WHQL Certificating test on the Windows 8.1 host and during the run I am running into error like,
Cause : Failed to Start the Task
Cause : Failed to Get the user Token
Failure : Failed to Start the Task "Detour Logging"
Cause : Failed to Get User Token ""\"" For Task "Detour Logging"
Cause : Session Option Not Supported by the Operating System.
Cause : WinPE Does not Support this Session Option
Anybody has any thoughts on this?
Thanks in advance.I am running WHCK for my file system minifilter driver. I suffer the same thing with you. have you got any idea?
-
This is one of the many error windows I'm getting. This MVI_9935 is from 5DMIII. But I'm also getting the same errors for other files with the exact same error message for Panasonic AF100. All shot at 23.976fps.
* 5D is h.264. They're all about the maximum lengths (of ~30 minutes).
* Panasonic footage is AVCHD wrapped MTS files. Two clips of this kind are about 75 minutes long each.
I have dealt with this problem by doing ALL of the steps I've read so far for each shoot and it takes too long... I'm doing
1) making FCPX archives
2) copying the all of the contents from each card (with the file structure intact) and pasting them onto an external hard drive (eSATA with 3TB space... with a plenty of empty space ~ 1TB)
3) copying and pasting just the video files onto an internal hard drive (separate from the system drive but same as where the project files are)
And I click through each error window (which takes about a full working day or more) and then when I _still_ see missing footage indicated by
that little "video camera" icon on the bottom left (as you can see above). What I do at this point is to:
1) re-import from one of the FCPX Archives, and if this does not work, I
2) re-import from one of the directly copied files.
Sometimes, I need to create a new event and re-import if the clip is still **referencing** the media on the camera.
I did not have this problem **before** FCPX's import window combined both spanned clips and individual files (circa version 10.0.5 or 10.0.6).
Now I have an Evernote notebook dedicated this problem and just from Google Searching, I have gathered 7 notes from different discussion forums dealindg with the same issue.
Some things that are common to us who are having problems:
1) we deal with big files (for long shoots)
2) we either use Canon 5DMIII or mix and match different types of codecs / wrappers.
3) we end up wasting so much time because Apple support is not paying attention.
4) or maybe we don't know how to get support from Apple. I know this isn't a forum where an Apple employee checks. Where can we directly contact Apple about this?For the 5D clips, copy ONLY the .mov files into a folder on your external drive or wherever else you want to put them and import from there. You can safely ignore the .thm files and other stuff. Pretty easy and you also will have an archive of your clips. For the Panasonic files, copy ALL the contents of the card and use import from camera.
If you want to import from the card to an event - with the 5D at least - you can use a card reader. Don't use the camera itself. It does work but it is slow and cumbersome and card readers are cheap.
Create an event, hit import from camera and the card should show up.
Sorry, not familiar with the Panasonics but some of the other guys at work use P2 cards and I have imported from them a couple of times with no problem using both a P2 card reader and importing directly from the camera via firewire.
I use the previously mentioned method with all my Canon files - 5D2, 5D3, 60D and 7D - and have never had a single problem.
Hope this helps. -
OSD - 8007000F " Failed to save current environment block"
Hello,
I have an issue with one of my Task Sequence OSD loads. I am using SCCM 2012 with a CAS trying to load a standalone drive.
The issue that i am having is it fails at the "Formatting C:\"
The logs are posted below.
I have tried to follow this: http://cmsource.net/2014/01/21/another-80070057-fail-apply-operating-system-image-step-in-sccm-2012/ But to no avail. I have tried using Diskpart, running clean cmd, and rebooting. That doesn't seem to help.
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692"
file="instruction.cxx:3011">
<![LOG[Successfully completed the action (Partition Disk 0) with the exit win32 code 0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692"
file="instruction.cxx:3037">
<![LOG[Do not send status message in full media case]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:4736">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=true]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Expand a string: %_SMSTSMDataPath%\Logs]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:782">
<![LOG[Clear local default environment]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:807">
<![LOG[User did not specify local data drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="utils.cpp:1198">
<![LOG[Volume C:\ has 499996389376 bytes of free space]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:360">
<![LOG[Volume C:\ is not bootable]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:366">
<![LOG[Volume D:\ is not a fixed hard drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:341">
<![LOG[Volume E:\ is not a fixed hard drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:341">
<![LOG[Volume X:\ is not a fixed hard drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:341">
<![LOG[TSM root drive = ]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:376">
<![LOG[We do not find an available volume to store the local data path]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:1213">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=3]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=3]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:833">
<![LOG[pszPath[0] != L'\0', HRESULT=80070057 (e:\nts_sccm_release\sms\framework\core\ccmcore\path.cpp,60)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0"
thread="692" file="path.cpp:60">
<![LOG[Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,655)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager"
context="" type="0" thread="692" file="environmentlib.cpp:655">
<![LOG[Failed to save environment to (80070057)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="2" thread="692" file="environmentlib.cpp:673">
<![LOG[TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\executionenv.cxx,842)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager"
context="" type="0" thread="692" file="executionenv.cxx:842">
<![LOG[Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="3" thread="692" file="executionenv.cxx:842">
<![LOG[SaveEnvironment(), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\executionenv.cxx,420)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context=""
type="0" thread="692" file="executionenv.cxx:420">
<![LOG[Failed to persist execution state. Error 0x(80070057)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="2" thread="692" file="executionenv.cxx:426">
<![LOG[Failed to save execution state and environment to local hard disk]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="2" thread="692" file="engine.cxx:250">
<![LOG[Start executing an instruciton. Instruction name: Apply Operating System. Instruction pointer: 3]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1"
thread="692" file="engine.cxx:117">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Apply Operating System]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692"
file="executionenv.cxx:668">Sounds like your disk and/or disk controller isn't recognized during WinPE phase. Just download drivers needed from Lenovo, and put them in your boot image. Most off time only NIC and disk controller drivers are needed there. Hope it helps!
Just have a look to my blog for importing Lenovo drivers in SCCM easily:
http://henkhoogendoorn.blogspot.nl/2014/02/good-news-when-you-are-using-mdt-andor.html
My blogs: Henk's blog | Follow Me on:
Twitter | View My Profile on:
LinkedIn -
MDT 2012 U1 Blue Screen on task sequence ??
My Customer have MDT 2012 U1, so when he start a task sequence when the task start apply operating system, after the system restart and when the computer install the system the blue screen appear. It is very strange beacause the same task sequence work on
some other model but in this Lenove M82 (3306-G1F) and M82 (M3395-AB4) we have the same error. But on other Lenovo model the same task work very fine. Why?
SMSTS.log
We do not find an available volume to store the local data path TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a TS execution environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSInstructionStackString=22 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a TS execution environment variable _SMSTSInstructionStackString=22 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Save the current environment block TSManager 2014-09-11 08:54:07 1892 (0x0764)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save environment to (80070057) TSManager 2014-09-11 08:54:07 1892 (0x0764)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
Unknown error (Error: 80070057; Source: Unknown) TSManager 2014-09-11 08:54:07 1892 (0x0764)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to persist execution state. Error 0x(80070057) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save execution state and environment to local hard disk TSManager 2014-09-11 08:54:07 1892 (0x0764)
Start executing an instruciton. Instruction name: New Computer only. Instruction pointer: 24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSCurrentActionName=New Computer only TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Evaluating an AND expression TSManager 2014-09-11 08:54:07 1892 (0x0764)
Evaluating a variable condition expression TSManager 2014-09-11 08:54:07 1892 (0x0764)
Variable = DeploymentType TSManager 2014-09-11 08:54:07 1892 (0x0764)
Value = NEWCOMPUTER TSManager 2014-09-11 08:54:07 1892 (0x0764)
Operator = equals TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: equals TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: DeploymentType TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: NEWCOMPUTER TSManager 2014-09-11 08:54:07 1892 (0x0764)
The variable condition expression is evaluated to be TRUE TSManager 2014-09-11 08:54:07 1892 (0x0764)
The AND expression is evaluated to be TRUE TSManager 2014-09-11 08:54:07 1892 (0x0764)
The condition for the group (New Computer only) is evaluated to be true TSManager 2014-09-11 08:54:07 1892 (0x0764)
The group (New Computer only) has been successfully started TSManager 2014-09-11 08:54:07 1892 (0x0764)
Sending status message . . . TSManager 2014-09-11 08:54:07 1892 (0x0764)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2014-09-11 08:54:07 1892 (0x0764)
User did not specify local data drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume D:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume X:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume Z:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
BDD.log
Property LogPath is now = X:\MININT\SMSOSD\OSDLOGS LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Property Debug is now = FALSE LiteTouch 2014-09-11 08:53:34 0 (0x0000)
ZTIUtility!GetAllFixedDrives (Faux) LiteTouch 2014-09-11 08:53:34 0 (0x0000)
ZTIUtility!GetAllFixedDrives = LiteTouch 2014-09-11 08:53:34 0 (0x0000)
No task sequence is in progress. LiteTouch 2014-09-11 08:53:34 0 (0x0000)
New ZTIDisk :
\\MININT-KGJQ3PL\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0" LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Found Possible OS TargetDisk:
\\MININT-KGJQ3PL\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0" LiteTouch 2014-09-11 08:53:34 0 (0x0000)
GetPartitions: 0 LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Did not find disk. LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Property SMSTSLocalDataDrive is now = LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Unable to connect to BCDStore. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Not running within WinPE or WinRE. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeploymentMethod is now = UNC LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeploymentMethod = UNC LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeployRoot is now = X:\Deploy LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Using a local or mapped drive, no connection is required. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeployRoot = X:\Deploy LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeployDrive is now = X: LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeployDrive = X: LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property PHASE is now = PREINSTALL LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeploymentType is now = NEWCOMPUTER LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Phase = PREINSTALL LiteTouch 2014-09-11 08:53:40 0 (0x0000)
About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property inifile is now = Bootstrap.ini ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
------------------------- Object Initialization ------------------------- ZTIGather 2014-09-11 08:53:40 0 (0x0000)
------------------------- Initialization ------------------------- ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Synchronizing the environments. ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DeployRoot is now = X:\Deploy ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DeployDrive is now = X: ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished synchronizing the environments. ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property definition is now = BDD_Welcome_ENU.xml Wizard 2014-09-11 08:53:40 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 Wizard 2014-09-11 08:53:40 0 (0x0000)
Getting OS info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSCurrentVersion is now = 6.1.7601 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSCurrentBuild is now = 7601 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSVersion is now = WinPE ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IsServerOS is now = False ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IsServerCoreOS is now = False ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting OS info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Getting HAL information ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Not Wizard = Faux Wizard 2014-09-11 08:53:40 0 (0x0000)
Property WizardComplete is now = N Wizard 2014-09-11 08:53:40 0 (0x0000)
Property HALName is now = acpiapic ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting HAL information ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Getting network info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Checking network adapter: [00000000] Intel(R) 82579LM Gigabit Network Connection ZTIGather 2014-09-11 08:53:40 0 (0x0000)
MAC address = 44:37:E6:D0:8F:EF ZTIGather 2014-09-11 08:53:40 0 (0x0000)
IP Address = 10.26.33.23 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
IP Address = fe80::8d70:f039:f93f:e5e9 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Default Gateway = 10.26.32.1 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IPAddress001 is now = 10.26.33.23 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IPAddress002 is now = fe80::8d70:f039:f93f:e5e9 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property MacAddress001 is now = 44:37:E6:D0:8F:EF ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DefaultGateway001 is now = 10.26.32.1 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting network info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting DP info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine ConfigMgr distribution point ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Finished getting DP info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting WDS server info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine WDS server name, probably not booted from WDS. ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Finished getting WDS server info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Property HostName is now = MININT-KGJQ3PL ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting asset info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine asset tag via WMI. ZTIGather 2014-09-11 08:53:41 0 (0x0000)
FindFile(...\Microsoft.BDD.Utility.dll) Result : 0 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
RUN: regsvr32.exe /s "X:\Deploy\Tools\x86\Microsoft.BDD.Utility.dll" ZTIGather 2014-09-11 08:53:42 0 (0x0000)
FindFile: The file x64\Microsoft.BDD.Utility.dll could not be found in any standard locations. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
FindFile(...\Microsoft.BDD.Utility.dll) Result : 1 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
RUN: regsvr32.exe /s "" ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property AssetTag is now = ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SerialNumber is now = MJ24PLX ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Make is now = LENOVO ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Model is now = 3306G1F ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Product is now = MAHOBAY ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property UUID is now = 4C5C19C8-5CD9-11E3-8E8B-153233E31400 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Memory is now = 3891 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Architecture is now = X86 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property ProcessorSpeed is now = 3300 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property CapableArchitecture is now = AMD64 X64 X86 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsLaptop is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsDesktop is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsServer is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsUEFI is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsOnBattery is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsX86 is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsX64 is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsSLAT is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished getting asset info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Getting OS SKU info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Unable to determine Windows SKU while in Windows PE. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property OriginalArchitecture is now = ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Getting virtualization info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsHypervisorRunning is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsVT is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsNX is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Supports64Bit is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsHyperVRole is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
This computer does not appear to be a virtual machine (BIOS is 'LENOVO - 14c0'). ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsVM is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished getting virtualization info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Connection succeeded to MicrosoftVolumeEncryption ZTIGather 2014-09-11 08:53:42 0 (0x0000)
There are no encrypted drives ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsBDE is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Processing the PREINSTALL phase. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Determining the INI file to use. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished determining the INI file to use. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Using from [Settings]: Rule Priority = DEFAULT ZTIGather 2014-09-11 08:53:42 0 (0x0000)
------ Processing the [DEFAULT] section ------ ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property DEPLOYROOT is now = \\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: DEPLOYROOT =
\\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property USERID is now = Administrateur ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: USERID = Administrateur ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property USERDOMAIN is now = crdiq03 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: USERDOMAIN = crdiq03 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:43 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property KEYBOARDLOCALEPE is now = 0c0c:00001009 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: KEYBOARDLOCALEPE = 0c0c:00001009 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property SKIPBDDWELCOME is now = YES ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: SKIPBDDWELCOME = YES ZTIGather 2014-09-11 08:53:43 0 (0x0000)
------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Remapping variables. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property TaskSequenceID is now = ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property DeploymentType is now = NEWCOMPUTER ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Finished remapping variables. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
ZTIGather processing completed successfully. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Command completed, return code = 0 LiteTouch 2014-09-11 08:53:43 0 (0x0000)
Property WizardComplete is now = Y Wizard 2014-09-11 08:53:44 0 (0x0000)
About to run command: wpeutil.exe SetKeyboardLayout 0c0c:00001009 LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Command completed, return code = 0 LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Validating connection to \\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Mapped Network UNC Path Z: =
\\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Found Existing UNC Path Z: =
\\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Successfully established connection using supplied credentials. LiteTouch 2014-09-11 08:53:44 0 (0x0000)
About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /nolocalonly LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Property definition is now = WelcomeWiz_Initialize.xml Wizard 2014-09-11 08:53:44 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 Wizard 2014-09-11 08:53:44 0 (0x0000)
Property nolocalonly is now = ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIGather 2014-09-11 08:53:44 0 (0x0000)
------------------------- Object Initialization ------------------------- ZTIGather 2014-09-11 08:53:44 0 (0x0000)
------------------------- Initialization ------------------------- ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Synchronizing the environments. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Property DeployRoot is now = \\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Property DeployDrive is now = X: ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Finished synchronizing the environments. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Skipping local settings gathering because it has already been done. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Processing the PREINSTALL phase. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Determining the INI file to use. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Not Wizard = Faux Wizard 2014-09-11 08:53:44 0 (0x0000)
Property WizardComplete is now = N Wizard 2014-09-11 08:53:44 0 (0x0000)
Using DEFAULT VALUE: Ini file =
\\10.26.32.40\DeploymentShare$\Control\CustomSettings.ini ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Finished determining the INI file to use. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Added new custom property MYCUSTOMPROPERTY ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Using from [Settings]: Rule Priority = DEFAULT ZTIGather 2014-09-11 08:53:45 0 (0x0000)
------ Processing the [DEFAULT] section ------ ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property EVENTSERVICE is now = http://10.26.32.40:9800 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: EVENTSERVICE = http://10.26.32.40:9800 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property OSINSTALL is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: OSINSTALL = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property JOINWORKGROUP is now = GROUPE ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: JOINWORKGROUP = GROUPE ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property TIMEZONE is now = 035 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: TIMEZONE = 035 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property TIMEZONENAME is now = Eastern Standard Time ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: TIMEZONENAME = Eastern Standard Time ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property KEYBOARDLOCALE is now = 0c0c:00001009 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: KEYBOARDLOCALE = 0c0c:00001009 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property USERLOCALE is now = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: USERLOCALE = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property UILANGUAGE is now = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: UILANGUAGE = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCAPTURE is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCAPTURE = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:45 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPAPPLICATIONS is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPAPPLICATIONS = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCOMPUTERBACKUP is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCOMPUTERBACKUP = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPDOMAINMEMBERSHIP is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPDOMAINMEMBERSHIP = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCOMPUTERNAME is now = NO ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCOMPUTERNAME = NO ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPDEPLOYMENTTYPE is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPDEPLOYMENTTYPE = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPUSERDATA is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPUSERDATA = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPPACKAGEDISPLAY is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPPACKAGEDISPLAY = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPLOCALESELECTION is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPLOCALESELECTION = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000Hi,
I agree with Damon.
Might be the ConfigMgr Driver Injector will help you.
This tool will allow you to capture installed drivers on your workstations and then will automatically import them in ConfigMgr 2012.
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
MDT 2012 OSD Failure (5627):1450 Run DISM.exe
Litetouch deployment failed, return code=-214746729 0x80004005
Failed to save environment to 80070057
Failed to run the action:Install Operating System
Unknown error(Error:000015FB;Source:Unknown)
The execution of the group(install) has failed and the execution has been aborted. An action failed
Operating system aborted(Error:8004004:Source:Windows)
Failed to run last action:Install Operating system.Execution of task sequence failed
Unknown error:Error:000015FB:Source:unknown)
Can some one help me with this? I am trying to run standard client TS for windows 7
Thanks,
Rajith.
Thanks, Rajith PHi, I had slightly different error code (no 1450 in the beginning), and my error message was as follows:
FAILURE ( 5627 ): -2147467259 0x800F082E: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error:000015FB; Source: Unknown)
and it also said I had 8 errors because of this.
What solved this for me was to enter Properties of the Task Sequence and choose the tab Task Sequence and in the group "Install" in the "Install Operating System" I clicked the tab Options and chose to "Continue on error". This
worked for me. I don't know why it stopped for me since the installation always concluded with 100% and then gave the error message, so I don't know what was going wrong, so if anyone knows what the Lite Touch Installation is complaining about, please let
us know! =)
(A strange thing to have 8 errors and then just ignore them and the installation continues just fine, with an up and running Windows install at the end!) -
MDT 2012 Replace computer task sequence
Hello all,
I am using MDT 2012 Update 1 for upgrading over 200 machines from Windows XP to Windows 7.
Some of these machines are going to be REFRESH scenario. I have the task sequence for REFRESH scenario and it is working as expected.
However, I do not know how to create REPLACE scenario task sequence. From what I understand, I need to create two tasks sequences. I have created a task sequence that capture user's data and upload it to a share.
But how do I create a restore task sequence that restores that data to another computer after installing OS? What do I need to in the restore task sequence that either prompts me to select where to restore the data from or knows where the data is?
In SCCM there is computer association, but I have not been able to figure out how to do it purely using MDT.
Any expert help is greatly appreciated.
Thanks in advance,
SinghP80Right, you will need 2 task sequences in a replace scenario. The REPLACE task sequence captures the user state from the running OS. Then you use a NEW COMPUTER task sequence (I called mine RESTORE) that restores the user state back after installing
the OS, which will boot from media or PXE. RESTORE gets all of its values from the Default and Jackson sections. My apologies, my customsettings.ini is butchered and has comments and junk in it that I should remove to clean it up. And you will
have to edit the code as described in the settings per task sequence thread for my cs.ini to work. And, I set my OSDComputerName=%assettag%. I set my Dell asset tags in the BIOS with the Dell CCTK tool.
http://social.technet.microsoft.com/Forums/en-US/e17a1952-d1f7-41ef-8231-0d6fcc41882e/mdt-2012-settings-per-task-sequence?forum=mdt
[Settings]
Priority=ByLaptopType, ByDesktopType, ByIsVM, DefaultGateway, TaskSequenceID, Default
Properties=MyCustomProperty
[DefaultGateway]
192.168.122.1=Jackson
[Jackson]
DeployRoot=\\192.168.122.6\FDO_Offices
SkipComputerBackup=NO
BackupDir=Captures
BackupShare=\\192.168.122.2\f$
UDShare=\\192.168.122.2\f$\usmtstorage
OSDComputerName=%AssetTag%
UDDir=%OSDComputerName%
SLSShareDynamicLogging=%DeployRoot%\Logs\%OSDComputerName%
SLSHARE=\\192.168.122.2\F$\Logs
MachineObjectOU=OU=Computers,OU=Jackson,OU=Branches,DC=xxxxxxxx,DC=xxxxxxxx,DC=xxxxxxxxxx
UserDataLocation=\\192.168.122.2\f$\usmtstorage\%OSDComputerName%
ComputerBackupLocation=\\192.168.122.2\f$\captures
UserID=xxxxxxxxxx
UserDomain=xxxxxxxxxx
UserPassword=xxxxxxxxxxxx
[ByLaptopType]
Subsection=Laptop-%IsLaptop%
[ByDesktopType]
Subsection=Desktop-%IsDesktop%
[ByIsVM]
Subsection=IsVM-%IsVM%
[Laptop-True]
SkipBitLocker=NO
BDEInstall=TPM
BDEInstallSuppress=NO
BDEWaitForEncryption=FALSE
BDEDriveSize=512
BDEDriveLetter=S:
BDERecoveryKey=AD
;BDEKeyLocation=\\192.168.122.2\f$\bitlocker_keys
BDEAllowAlphaNumericPin=Yes
[Desktop-True]
SkipBitLocker=YES
[IsVM-True]
SkipBitLocker=YES
[Laptop-False]
[Desktop-False]
[IsVM-False]
[Default]
XResolution=1
YResolution=1
BitsPerPel=32
ApplyGPOPack=NO
HIDESHELL=NO
DISABLETASKMGR=YES
;BackupDrive=ALL
SkipProductKey=YES
SkipLocaleSelection=YES
UserLocale=en-US
UILanguage=en-US
SkipTimeZone=YES
TimeZoneName=Central Standard Time
KeyboardLocale=en-US
_SMSTSOrgName=Office of xxxxxxxxxxxx
SkipAdminPassword=YES
AdminPassword=xxxxxxxxxxxxx
SkipApplications=YES
SkipAppsOnUpgrade=YES
SkipDeploymentType=YES
SkipSummary=Yes
MandatoryApplications001={aa888a5e-849a-4522-a4e4-57b39dfa29c2} ;you'll want to remove this
[NEWCOMPUTER]
SkipUserData=YES
DeploymentType=NEWCOMPUTER
OSInstall=Y
;OSDComputerName=
SkipComputerName=NO
SkipFinalSummary=Yes
FinishAction=LOGOFF
SkipTaskSequence=NO
SkipDomainMembership=YES
JoinDomain=xxxxxxxx
DomainAdmin=xxxxxxxxxxxxxx
DomainAdminDomain=xxxxxxxxxxx
DomainAdminPassword=xxxxxxxxxxxxx
SkipCapture=YES
DoNotCreateExtraPartition=NO
[CAPTURE]
SkipUserData=YES
TaskSequenceID=CAPTURE
DeploymentType=CUSTOM
BackupFile=MASTERCAPTURE.wim
SkipAdminPassword=YES
AdminPassword=xxxxxxxxxx
SkipCapture=NO
DoCapture=YES
[REFRESH]
SkipUserData=NO
TaskSequenceID=REFRESH
DeploymentType=REFRESH
DoCapture=NO
USMTMigFiles001=MigApp.xml
USMTMigFiles002=MigUser.xml
USMTMigFiles003=MigDocs.xml
USMTMigFiles004=migexcludexternaldrives.xml ;you'll want to remove this
USMTMigFiles005=migmydocs.xml ;and this
;USMTMigFiles006=migwallpaper.xml
;USMTMigFiles006=MigNetPrinters.xml
; USMTMigFiles007=config.xml
;ScanStateArgs=/v:5 /o /c /vsc /all /localonly
ScanStateArgs /v:5 /o /c /ue:%computername%\*
LoadStateArgs=/v:5 /c
;BackupDrive=ALL
;OSDComputerName=%OSDComputerName%
SkipComputerName=NO
OSInstall=Y
SkipFinalSummary=Yes
FinishAction=LOGOFF
SkipTaskSequence=NO
SkipCapture=YES
DoNotCreateExtraPartition=NO
SkipDomainMembership=YES
JoinDomain=xxxxxxxxxxxx
DomainAdmin=xxxxxxxxxxxxx
DomainAdminDomain=xxxxxxxxxxx
DomainAdminPassword=xxxxxxxxxxxxxx
BackupFile=%OSDComputerName%.wim
[REPLACE]
TaskSequenceID=REPLACE
DeploymentType=REPLACE
SkipComputerName=NO
DoCapture=NO
USMTMigFiles001=MigApp.xml
USMTMigFiles002=MigUser.xml
USMTMigFiles003=MigDocs.xml
USMTMigFiles004=migexcludexternaldrives.xml ;remove this
USMTMigFiles005=migmydocs.xml ;and this
;USMTMigFiles006=migwallpaper.xml
;USMTMigFiles006=MigNetPrinters.xml
; USMTMigFiles007=config.xml
;ScanStateArgs=/v:5 /o /c /vsc /all /localonly
ScanStateArgs /v:5 /o /c /ue:%computername%\* /ue:xxxxxxxxxxxx\administrator
LoadStateArgs=/v:5 /c
;BackupDrive=ALL
SkipUserData=NO
SkipAdminPassword=YES
AdminPassword=xxxxxxxxxxx
SkipCapture=YES
DoCapture=NO
SkipComputerBackup=NO
BackupFile=%OSDComputerName%.wim
[RESTORE]
TaskSequenceID=RESTORE
DeploymentType=NEWCOMPUTER
DoCapture=NO
USMTMigFiles001=MigApp.xml
USMTMigFiles002=MigUser.xml
USMTMigFiles003=MigDocs.xml
USMTMigFiles004=migexcludexternaldrives.xml
USMTMigFiles005=migmydocs.xml
;USMTMigFiles006=migwallpaper.xml
ScanStateArgs /v:5 /o /c /ue:%computername%\*
LoadStateArgs=/v:5 /c /ue:%computername%\* /ue:xxxxxxxx\xxxxxxxx
SkipComputerName=NO
SkipUserData=NO
SkipDomainMembership=YES
JoinDomain=MSS
DomainAdmin=xxxxxxxxxxxx
DomainAdminDomain=xxxxxxxxxxx
DomainAdminPassword=xxxxxxxxxxxxx
DoNotCreateExtraPartition=NO
SkipFinalSummary=Yes
FinishAction=LOGOFF
SkipComputerBackup=NO
Bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\192.168.122.6\FDO_Offices
UserID=xxxxxxxxxx
UserDomain=xxxxxxx
UserPassword=xxxxxxxxxxxx
SkipBDDWelcome=YES -
Office 2003 Can't Save Files (after a while) under Windows XP ! [FAT32]
I've made a 30G Fat32 partition using Boot Camp and put XP2 on it, runs flawlessly. However, getting tired with the rosetta office under OS X, I switched to Windows last night for some heavy Word jobs (openning 4-5 20mb documents at same time).
The speed is much faster than Mac Office, however, something really annoys me: a while after I've openned a file, office actually delete the originally file and failed to save a new one !!! For example, i openned Project_1.doc, do some editing, leave it for a while, and then press save. Error promts out "failed to save the file, permission error blah blah blah" and then the Current Document name (appers on the top left corner of the window) change to ~WXXXX.tmp. The only way i can get around is to click save as, manually type a new file name and then save it. and the original Project_1.doc disapear!!
I almost paid heavily for this, after 4 hours work i was supposed to press the last Save. same error came out as expected, however some other windows pop up and shut the entire programme off (oh dear microsoft). As the original file has been magically removed, i get nothing... Thanks to long-time windows experience (fault torrent) I manage to recover my work from pieces of scratches (many pieces of ~WXXX.tmp) file, but this is wicked.
Anyone has any ideas whys that? i've use both mac os x start disc and MS chkdsk to test the harddrive, no problem.
.... hmmm....Noticed after testing that it was only shares on the xsan that were affected. If I created a share on the internal drive on the server, worked fine. That led me to this.
http://stanford.edu/group/macosxsig/blog/2009/12/extendedattributes_office200.html
we run into the same issue, XSan 2.2 with xattr, reshared via SMB&AFP. The strangest thing was that the error occur only when you try to copy to NTFS-formatted disks, and not FAT. What did the trick for us was to comment this line:
; vfs objects = darwinacl,darwin_streams
in /etc/smb.conf and restarting the server. Banged my head on the wall for two weeks over this! -
Windows 7 Image Deployment Failed in HP model D530 using MDT 2012 and ADK 8.0
Hi,
I need your help to sort out the following issue.
I have installed MDT 2012 +ADK 8.0 and created Windows 7 32 bit OS from CD in the deployment share and tried deploying the raw OS from Deployment Share in to a reference machine (HP D530) ,the deployment failed also couldn't able to capture
Image from the machine,even the sysprep failed. This is the error
Your PC needs to restart.
Please hold down the power button.
Error Code:0x0000005D
Parameters:
0x030F0209
0x746E6547
0X49656E69
0X6C65746E
So tried the same in another HP machine ,the deployment was success and also was able to capture the refrence machine.
Need your help to find why this error occurred in this specific HP model D530 alone. Is it the reason that ADK was not supported in that specific model.
D530 is the maximum available HW model in client environment so your help will be much appreciated.
Thanks in Advance!!I have never seen that error before (see identical post). I did a quick internet search and found the following:
http://optimizewindows8.wordpress.com/2013/03/26/how-to-fix-error-code-0x0000005d/
Either:
1) Upgrade your machines with modern processors that support the ADK.
or
2) Downgrade to the WAIK
http://www.microsoft.com/en-us/download/details.aspx?id=5753 and stick with Windows 7.
Keith Garner - keithga.wordpress.com -
MDT 2012 Errors - Won't Run My Windows 8.1 Activation Script/Task Sequences Fail
Hello all,
I've been using MDT 2012 for a while now to image machines in our environment with success for the most part. Just recently, however, I've been running into issues at the point where the deployment is supposed to be activating Windows where it will just fail the deployment. It outputs a number of errors, including:TextWindows cannot remove Microsoft.VCLibs.120.00_12.0.20812.1_x86__8wekyb3d8bbwe because the current user does not have that package installed. Use Get-AppxPackage to see the list of packages installed.NOTE: For additional information, look for [ActivityId] 5f3738f0-b9a2-0001-0581-375fa2b9d001 in the Event Log or use the command line Get-AppxLog -ActivityID 5f3738f0-b9a2-0001-0581-375fa2b9d001]LOG]!+ Get-AppxPackage -AllUsers | Remove-AppxPackage+ ~~~~~~~~~~~~~~~~~~]Which I'm familiar with because I've seen this...
This topic first appeared in the Spiceworks CommunityHi,
Thanks Again for taking a look.
I checked the sysprep log in the image and they look fine. No errors.
As requested here are some logs. Let me know if I can provide anything else.
BDD.log
litetouch.log
SMSTS.log
Im not actually attempting to provide a recovery image. What I am doing is leveraging MDT to refresh the computer remotely. We can update the MDT media on the hidden data partition,when required and kick it off remotely. Some of the computers are very
remote, and without SCCM DP's, plus a combination of slow links and a lack of deskside techs made this a requirement. This works without incident.
The only issue I have is on a new computer if I run the sequence (offline USB media) it will fail the first time, unless I run a diskpart clean in PE first.. Then it will succeed. Refreshing the computer is fine. -
MDT 2012 Update 1 Boot Image Creation Fails in SP1
I have my site server (SCCM 2012 SP1) installed on Server 2012 with the Windows 8 ADK installed (I've also tried installing the Win7 WAIK with no change to the below problem). It is hosting the site server, FSP, AIS, and Endpoint protection roles. I
installed MDT 2012 Update 1 (build 6.1.2373.0) and installed ConfigMgr integration. I have a share
\\siteserver\bootimages that I'm creating the boot image to and the system account has full control on both the NTFS and Share permissions. When I create the boot image I get an error almost immediately and
a popup that the Microsoft.BDD.ElevatedProxy has stopped working. Details from the pop-up:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: microsoft.bdd.elevatedproxy.exe
Problem Signature 02: 3.0.0.0
Problem Signature 03: 50400c36
Problem Signature 04: System.ServiceModel
Problem Signature 05: 3.0.0.0
Problem Signature 06: 4fee6b19
Problem Signature 07: fb9
Problem Signature 08: a7
Problem Signature 09: G3DT0URDW53KGT4VJDEEQCRAUIFCNTLL
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
The error in the boot image creation wizard is:
Started processing.
Creating boot image.
Error while importing Microsoft Deployment Toolkit Task Sequence.
System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at INewBootImage.Create(String platform, String scratchSpace, String[] components, String[] extraContent, String wimFile)
at NewBootImageClient.Create(String platform, String scratchSpace, String[] components, String[] extraContent, String wimFile)
at Microsoft.BDD.Wizards.SCCM_ImportTaskSequenceTask.DoWork(SmsPageData smspageData, Dictionary`2 data)
I haven't found anything online on this particular error, I've seen all the ones about MDT 2012 and ConfigMgr 2012 CU 1. Any ideas? Any logs that may be revealing to the cause of this error? I've tried removing integration components, uninstalling MDT, reboot,
re-installing, etc, but same problem occurs each time.I just tried to create a new boot image again, the DISM.log file does not show any evidence of the attempt to create the boot wim, in fact nothing since 0800 this morning. The most recent logs are as follows:
2013-03-03 20:22:59, Info DISM PID=2252 TID=4312 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-03 20:22:59, Info DISM PID=2252 TID=4312 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=4312 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 Deleted g_internalDismSession - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 Shutdown SessionTable - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 Leave DismShutdownInternal - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 DismApi.dll:
- DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 DismApi.dll:
- DismShutdownInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll: Version 6.2.9200.16384 - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Enter DismInitializeInternal - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Initialized GlobalConfig - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Initialized SessionTable - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2013-03-03 22:02:51, Info DISM API: PID=3544 TID=3672 Waiting for m_pInternalThread to start - CCommandThread::Start
2013-03-03 22:02:51, Info DISM API: PID=3544 TID=4172 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=4172 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 m_pInternalThread started - CCommandThread::Start
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 Created g_internalDismSession - DismInitializeInternal
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 Leave DismInitializeInternal - DismInitializeInternal
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 Enter DismShutdownInternal - DismShutdownInternal
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 GetReferenceCount hr: 0x0 - CSessionTable::RemoveSession
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 Refcount for DismSession= 1s 0 - CSessionTable::RemoveSession
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=4172 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=4172 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2013-03-03 22:03:59, Info DISM API: PID=3544 TID=4172 ExecuteLoop: Cancel signaled - CCommandThread::ExecuteLoop
2013-03-03 22:03:59, Info DISM API: PID=3544 TID=4172 Leave CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-03 22:04:39, Info DISM PID=3544 TID=4172 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2013-03-03 22:04:39, Info DISM PID=3544 TID=4172 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-03 22:04:39, Info DISM PID=3544 TID=4172 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=4172 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 Deleted g_internalDismSession - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 Shutdown SessionTable - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 Leave DismShutdownInternal - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismShutdownInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll: Version 6.2.9200.16384 - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Enter DismInitializeInternal - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Initialized GlobalConfig - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Initialized SessionTable - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2013-03-04 08:41:08, Info DISM API: PID=1016 TID=1620 Waiting for m_pInternalThread to start - CCommandThread::Start
2013-03-04 08:41:08, Info DISM API: PID=1016 TID=4176 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=4176 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 m_pInternalThread started - CCommandThread::Start
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 Created g_internalDismSession - DismInitializeInternal
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 Leave DismInitializeInternal - DismInitializeInternal
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 Enter DismShutdownInternal - DismShutdownInternal
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 GetReferenceCount hr: 0x0 - CSessionTable::RemoveSession
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 Refcount for DismSession= 1s 0 - CSessionTable::RemoveSession
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 ExecuteLoop: Cancel signaled - CCommandThread::ExecuteLoop
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 Leave CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-04 08:42:44, Info DISM PID=1016 TID=4176 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2013-03-04 08:42:44, Info DISM PID=1016 TID=4176 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-04 08:42:44, Info DISM PID=1016 TID=4176 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=4176 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 Deleted g_internalDismSession - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 Shutdown SessionTable - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 Leave DismShutdownInternal - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismShutdownInternal
2013-03-05 08:44:10, Info DISM API: PID=4140 TID=3140 DismApi.dll:
- DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll:
- DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll: Version 6.2.9200.16384 - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 Enter DismInitializeInternal - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 Initialized GlobalConfig - DismInitializeInternal
2013-03-05 08:44:13, Info DISM API: PID=4140 TID=3140 Initialized SessionTable - DismInitializeInternal
2013-03-05 08:44:13, Info DISM API: PID=4140 TID=3140 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2013-03-05 08:44:14, Info DISM API: PID=4140 TID=3140 Waiting for m_pInternalThread to start - CCommandThread::Start
2013-03-05 08:44:14, Info DISM API: PID=4140 TID=640 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 m_pInternalThread started - CCommandThread::Start
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 Created g_internalDismSession - DismInitializeInternal
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 Leave DismInitializeInternal - DismInitializeInternal
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=640 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 Enter DismShutdownInternal - DismShutdownInternal
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 GetReferenceCount hr: 0x0 - CSessionTable::RemoveSession
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 Refcount for DismSession= 1s 0 - CSessionTable::RemoveSession
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 ExecuteLoop: Cancel signaled - CCommandThread::ExecuteLoop
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 Leave CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-05 08:46:18, Info DISM PID=4140 TID=640 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2013-03-05 08:46:18, Info DISM PID=4140 TID=640 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-05 08:46:18, Info DISM PID=4140 TID=640 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=640 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 Deleted g_internalDismSession - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 Shutdown SessionTable - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 Leave DismShutdownInternal - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 DismApi.dll:
- DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 DismApi.dll: -
MDT 2012 Litetocuh Deployment Failed, Return Code = -2147467259 0x0004005
Here is what I have tried. I have tried recreating the DeploymentShare. Moved my Deployment Test Share to the standard 2008 Server running MDT 2012. I have setup a Win7 x64 box as the Deployment Manager. I am still getting the following error:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Copy OEM files.
Incorrect function, (Error: 00000001; Source: Windows)
The execution of the group (Install has failed and the execution has been aborted. An action failed.
Operation abourted (Error: 80004004; Source Windows)
Failed to run the last action: Copy OEM files, Execution of task sequence failed.
Incorrect funtion. (Error: 00000001; Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
Recreated the Image, Task Sequences, CS.ini and Boot.ini) Incorporated all OOB Drivers, Packages. Using
a USB 16Gb flash drive with LiteTouchx86.
List last time we tried to create a separate deployment share. Copy all the preexisting data from a working known good deployment share with images, task
sequence, cs.ini and all image files. Still getting the same issue.
Finally checked some of the Google, technet and forums for any assistance but non seem to do the trick.
I'm new to the process but have been working with a fellow tech who has been working with MDT for six months and he can not find the issue either.
Thanks for all your help up front.Can you post your log files?
IT Support " Scripting Noob "
Maybe you are looking for
-
I use "voice memos" on my ipod alot so am disappointed it is not included on Ipad3. The itunes store has some apps but receive mixed reviews. Any recommendations re finding an equivalent app to "voice memos" which comes with the ipod please? I recor
-
Hi , Gurus, I am configuring the EWA, i have configured finally when i try to schdule the service data processing, it's scheduling in background, in SM37 if i see that job status, job is cancelling and generating the abap dump, please help me here th
-
Is there a magsafe to usb connector ?
Hello Everyone, is there a magsafe to usb connector available? If not do not rant my face off just leave a message
-
Error installing Oracle 9i Database Enterprise/personal edition for win xp
Hi, Not sure if anyone can help me, but I just finish downloading the Oracle Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP (32 bit) When I finished unzipping the 3 files into Disk1, Disk2, and Disk3 folders I tried ru
-
Hi guys, Can u tell me what exactly is a JAD file?Can i exectue a JAD file directly or do i always need KToolbar to exectue it? cheers, Sachin