MDT 2012 Litetocuh Deployment Failed, Return Code = -2147467259 0x0004005

Here is what I have tried. I have tried recreating the DeploymentShare. Moved my Deployment Test Share to the standard 2008 Server running MDT 2012. I have setup a Win7 x64 box as the Deployment Manager. I am still getting the following error:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Copy OEM files.
Incorrect function, (Error: 00000001; Source: Windows)
The execution of the group (Install has failed and the execution has been aborted. An action failed.
Operation abourted (Error: 80004004; Source Windows)
Failed to run the last action: Copy OEM files, Execution of task sequence failed.
Incorrect funtion. (Error: 00000001; Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
Recreated the Image, Task Sequences, CS.ini and Boot.ini) Incorporated all OOB Drivers, Packages. Using
a USB 16Gb flash drive with LiteTouchx86.
List last time we tried to create a separate deployment share. Copy all the preexisting data from a working known good deployment share with images, task
sequence, cs.ini and all image files. Still getting the same issue.
Finally checked some of the Google, technet and forums for any assistance but non seem to do the trick.
I'm new to the process but have been working with a fellow tech who has been working with MDT for six months and he can not find the issue either.
Thanks for all your help up front.

Can you post your log files?
IT Support " Scripting Noob "

Similar Messages

MDT 2013 - Litetouch deployment failed, Return Code = -2147467259 0x80004005

I'm attempting to deploy an image that I have recently captured with MDT. I was able to capture the image without any problems and after capturing, it booted up properly. But now when I go to deploy the image using a Standard Task Sequence it
errors out. It does boot into WinPE and gets to the installing operating system portion then spits out the following 8 errors:
(5624):2: Run ImageX: /apply "\\PDC31089\DeploymentShare$\Operating Systems\Win7_BUP_1-31-14\Win7_BUP_1-31-14.wim" 1 C:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015F8; Source: Unknown)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015F8; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005After I receive the error messages if I attempt to restart the computer and allow it to boot up it just comes up with:"An operating system wasn't found. Try disconnecting any drives that don't contain an operating system"
I have tried the following to resolve this issue:
Create a new deployment share with only network drivers added and the one .WIM that was captured with MDT as well as one Task sequence.
Update to MDT 2013
Update Deployment share and completely regenerate Boot images
Tried starting deployment from within Windows by mapping the drive and executing litetouch.vbs
Also tried starting deployment using USB boot disk
I'm running out of ideas and seem to keep getting the same 8 error messages. It's very aggravating and am hoping that someone can point me in the right direction.
I've included some log files on Skydrive at: https://skydrive.live.com/redir?resid=6375A8F9E8089918%21105

I came across this post recently. I am having the same string of errors suddenly when I try to deploy any image from my MDT 2013 server now. Previous images now fail to install soon after the Inject Drivers task sequence at the Install Operating System sequence.
Each time I try to deploy an image(have tried several each with different task sequences), I get the same 7 errors.
The errors produced are:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Incorrect Function (Error: 00000001; Source: Windows)
The execution of the group (Install) has failed and the execution has been
aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task
sequence failed.
Incorrect Function
(Error: 00000001;
Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
My HD size is 146GB with about 71GB being free.
The BDD.log file is too large to post here apparently. Here are the
last bits of it.
<![LOG[Assume this disk is the destination Disk, and verify.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[TargetPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Search for Drive: TargetPartitionIdentifier SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Found Drive: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Property OSDisk is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Target Drive Letter Found: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Found OS Drive: C 0]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[New ZTIDiskPartition : \\MININT-I3DUVLI\root\cimv2:Win32_LogicalDisk.DeviceID="C:" \\MININT-I3DUVLI\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="11:36:58.000+000"
date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Check Disk [0] <> [0] OK to skip.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[####### NOTE: If this is one of the last lines in your BDD.log file, check C: for the most up to date bdd.log!!!]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Event 41001 sent: ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread=""
file="ZTIDiskpart">

Litetouch deployment failed, Return Code = -2147467259 0x80004005

I'm sure I have probably overlooked something simple here, but for the past few days when I create a new Windows 7 image, sysprep it, capture with imagex, then upload it into MDT I keep getting this error when I deploy it to a system. Here is the smstslog file if it helps. Appreciate any suggestions.
Expand a string: WinPEandFullOS TSManager 1/23/2010 1:15:07 AM 1272 (0x04F8)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 1/23/2010 1:15:07 AM 1272 (0x04F8)
Process completed with exit code 1 TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
!--------------------------------------------------------------------------------------------! TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Failed to run the action: Install Operating System.
Incorrect function. (Error: 00000001; Source: Windows) TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Sending status message . . . TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Set a global environment variable _SMSTSLastActionRetCode=1 TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Clear local default environment TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Let the parent group (Install) decides whether to continue execution TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Incorrect function. (Error: 00000001; Source: Windows) TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Sending status message . . . TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,762) TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Task Sequence Engine failed! Code: enExecutionFail TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
**************************************************************************** TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Task sequence execution failed with error code 80004005 TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Cleaning Up. Removing Authenticator TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
Cleaning up task sequence folder TSManager 1/23/2010 1:15:10 AM 1272 (0x04F8)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,513) TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,513) TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Command line for extension .exe is "%1" %* TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Set command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Executing command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
==========[ TsProgressUI started in process 1636 ]========== TsProgressUI 1/23/2010 1:15:11 AM 1512 (0x05E8)
Command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister TsProgressUI 1/23/2010 1:15:11 AM 1512 (0x05E8)
Unregistering COM classes TsProgressUI 1/23/2010 1:15:11 AM 1512 (0x05E8)
Unregistering class objects TsProgressUI 1/23/2010 1:15:11 AM 1512 (0x05E8)
Shutdown complete. TsProgressUI 1/23/2010 1:15:11 AM 1512 (0x05E8)
Process completed with exit code 0 TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Successfully unregistered TS Progress UI. TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
g_TSManager.Run(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,654) TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005 TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Sending error status message TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
In non SMS staqndalone mode.Ignoring SendStatusMessage request TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Finalizing logging from process 1260 TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Finalizing logs to root of first available drive TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Successfully finalized logs to C:\SMSTSLog TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)
Cleaning up task sequencing logging configuration. TSManager 1/23/2010 1:15:11 AM 1272 (0x04F8)

smsts.log
Set command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 1/28/2010 10:30:34 AM 548 (0x0224)
Start executing the command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 1/28/2010 10:30:34 AM 548 (0x0224)
!--------------------------------------------------------------------------------------------! TSManager 1/28/2010 10:30:34 AM 548 (0x0224)
Expand a string: WinPEandFullOS TSManager 1/28/2010 10:30:34 AM 548 (0x0224)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 1/28/2010 10:30:34 AM 548 (0x0224)
Process completed with exit code 31 TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
!--------------------------------------------------------------------------------------------! TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Failed to run the action: Install Operating System.
A device attached to the system is not functioning. (Error: 0000001F; Source: Windows) TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Sending status message . . . TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Set a global environment variable _SMSTSLastActionRetCode=31 TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Clear local default environment TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Let the parent group (Install) decides whether to continue execution TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
A device attached to the system is not functioning. (Error: 0000001F; Source: Windows) TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Sending status message . . . TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,762) TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Task Sequence Engine failed! Code: enExecutionFail TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
**************************************************************************** TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Task sequence execution failed with error code 80004005 TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Cleaning Up. Removing Authenticator TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
Cleaning up task sequence folder TSManager 1/28/2010 11:21:41 AM 548 (0x0224)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,513) TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Command line for extension .exe is "%1" %* TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Set command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Executing command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
==========[ TsProgressUI started in process 1736 ]========== TsProgressUI 1/28/2010 11:21:42 AM 1224 (0x04C8)
Command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister TsProgressUI 1/28/2010 11:21:42 AM 1224 (0x04C8)
Unregistering COM classes TsProgressUI 1/28/2010 11:21:42 AM 1224 (0x04C8)
Unregistering class objects TsProgressUI 1/28/2010 11:21:42 AM 1224 (0x04C8)
Shutdown complete. TsProgressUI 1/28/2010 11:21:42 AM 1224 (0x04C8)
Process completed with exit code 0 TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Successfully unregistered TS Progress UI. TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
g_TSManager.Run(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,654) TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005 TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Sending error status message TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
In non SMS staqndalone mode.Ignoring SendStatusMessage request TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Finalizing logging from process 480 TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Finalizing logs to root of first available drive TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Successfully finalized logs to C:\SMSTSLog TSManager 1/28/2010 11:21:42 AM 548 (0x0224)
Cleaning up task sequencing logging configuration. TSManager 1/28/2010 11:21:42 AM 548 (0x0224)

Litetouch deployment failed, Return Code = -2147023504

I suddenly started getting this error on all my task sequences. I created a new vanilla sequence and got the error on it as well. It doesn't matter if I select a x86 image task or x64. This is across multiple pieces of hardware as well. Please Help!
<![LOG[LTI beginning deployment]LOG]!><time="11:01:31.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Event 41016 sent: LTI beginning deployment]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[About to run command: "X:\Deploy\Tools\X86\TsmBootstrap.exe" /env:SAStart]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread=""
file="LiteTouch">
<![LOG[Property LTIDirty is now = TRUE]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Command completed, return code = -2147023504]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Litetouch deployment failed, Return Code = -2147023504 0x80070570]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
<![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147023504 0x80070570]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread=""
file="LiteTouch">
<![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

I found the issue with this. Apparently the computers I was running these sequences on had previous deployments run and interrupted on them. Even though the deployment wizard wasn't flagging them as "dirty" clearly there was something hanging around
on the HD that was causing issues. I used diskpart to run a quick format on the OS volume and all is good.
Maybe this will help someone googleing in the future.

Failed (why else would I post). Error creating an image of Drive D:, rc = 2. Return Code -2147467259 0x80004005. "Not enough storage is available to process this command".

Seems a common set of Return Codes to post so apologies that's not specific.
To me appears the issue is related to the "Not enough storage is available to process this command" log entry. Looked into it and some SCCM 2007 issues that were related to too many sessions to the site server, but even after rebooting my MDT server
I get the same issue.
The server I am attempting to capture has a 60gb VHD with around 30gb actually used. The MDT Server has over 100GB free space.
Here is from BDD.log:
Console > Turning on VERIFY option for network share
ZTIBackup 10/10/2014 12:56:30 PM
0 (0x0000)
Console > Scanning files and directories...
ZTIBackup 10/10/2014 12:56:30 PM
0 (0x0000)
Console > Error imaging drive [D:\]
ZTIBackup 10/10/2014 12:56:30 PM
0 (0x0000)
Console > Not enough storage is available to process this command.
ZTIBackup 10/10/2014 12:56:31 PM
0 (0x0000)
Return code from command = 2 ZTIBackup
10/10/2014 12:56:31 PM 0 (0x0000)
Error creating an image of drive D:, rc = 2
ZTIBackup 10/10/2014 12:56:31 PM
0 (0x0000)
Event 41036 sent: Error creating an image of drive D:, rc = 2
ZTIBackup 10/10/2014 12:56:31 PM
0 (0x0000)
ZTIBackup COMPLETED. Return Value = 2
ZTIBackup 10/10/2014 12:56:32 PM
0 (0x0000)
ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
ZTIBackup 10/10/2014 12:56:32 PM
0 (0x0000)
Event 41002 sent: ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
ZTIBackup 10/10/2014 12:56:32 PM
0 (0x0000)
Command completed, return code = -2147467259
LiteTouch 10/10/2014 12:56:33 PM
0 (0x0000)
Litetouch deployment failed, Return Code = -2147467259 0x80004005
LiteTouch 10/10/2014 12:56:33 PM
0 (0x0000)
Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259 0x80004005
LiteTouch 10/10/2014 12:56:33 PM
0 (0x0000)
I'll post below full logs.

imagex reported:
Console > Error imaging drive [D:\]
Console > Not enough storage is available to process this command.
obvious question is: do you have enough free space on
"\\arcadmin3\deploymentshare$\Captures\SIMSERVER.wim"
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

DB connect failed return code 000256 --- disp_work ended

Hi Friends,
I have installed ides ECC 6 on oracle 10g on windows 2003 server.Now I am unable to start SAP console. While starting the disp+work getting ended. I found form the log that the DB connect failed return code 000256 in dev_disp.
snapshot is given below for the reference. Please advice with the resolution.Appreciate for an early response.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon May 18 17:14:23 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno      04
M sid        ECC
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3096
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3096) [dpxxdisp.c   1293]
I MtxInit: 30000 0 0
M
M Mon May 18 17:14:24 2009
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          18304     (1408)
M DpShMCreate: sizeof(tm_adm)          3954072     (19672)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1452)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06510040, size: 4613144)
M DpShMCreate: allocated sys_adm at 06510040
M DpShMCreate: allocated wp_adm at 06511E28
M DpShMCreate: allocated tm_adm_list at 065165A8
M DpShMCreate: allocated tm_adm at 065165D8
M DpShMCreate: allocated wp_ca_adm at 068DBB70
M DpShMCreate: allocated appc_ca_adm at 068E1930
M DpShMCreate: allocated comm_adm at 068E3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06964730
M DpShMCreate: allocated gw_adm at 06964770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 069647A0
M DpShMCreate: allocated wall_adm at 069647A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host ecc6
M
M Mon May 18 17:14:26 2009
M calling db_connect ...
C Prepending D:\usr\sap\ECC\DVEBMGS04\exe to Path.
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@C11 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06B2C998   0597F194   0597EA1C
C Attaching to DB Server C11 (con_hdl=0,svchp=0597E968,svrhp=06B41714)
C Starting user session (con_hdl=0,svchp=0597E968,srvhp=06B41714,usrhp=06B8CD88)
C Now '/@C11' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0597E968,usrhp=06B8CD88)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@C11 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06B2C998   0597F194   0597EA1C
C Starting user session (con_hdl=0,svchp=0597E968,srvhp=06B41714,usrhp=06B8CD88)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 28000
[dboci.c      4345]
C Detaching from DB Server (con_hdl=0,svchp=0597E968,srvhp=06B41714)
C *** ERROR => CONNECT failed with sql error '28000'
[dbsloci.c    10704]
B ***LOG BY2=> sql error 28000 performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-28000: the account is locked [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 28000 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-28000: the account is locked [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10019]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ecc6_ECC_04 on host ecc6 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon May 18 17:14:26 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10204
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3096) [dpnttool.c   327]
Regard's
Shashi

> C *** ERROR => CONNECT failed with sql error '28000'
> [dbsloci.c    10704]
> B ***LOG BY2=> sql error 28000 performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
> B ***LOG BY0=> ORA-28000: the account is locked [dbsh#2 @ 1204] [dbsh    1204 ]
> B ***LOG BY2=> sql error 28000 performing CON [dblink#3 @ 431] [dblink 0431 ]
> B ***LOG BY0=> ORA-28000: the account is locked [dblink#3 @ 431] [dblink 0431 ]
> M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1403]
Read Note 951167      ORA-28000: the account is locked
Markus

DB-Connect Failed, Return Code 000256

Hello,
When I try to start SAP I get a SQL error saying "DB-Connect failed, return code 000256". Does anybody know what could cause this error and how to slove this problem.
I checked the dev_w0 file as the following.
trc file: "dev_w0", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Sat May 09 21:08:37 2015
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is '46D.00'
B New connection 0 created
M relno      4640
M patchlevel 0
M patchno    534
M intno      0
M pid        2444
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2444) [dpxxdisp.c   911]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T0
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Got ORACLE_HOME=D:\oracle\ora81 from environment
C Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@PRD on connection 0 ...
C *** ERROR => OCI-call 'olog' failed: rc = 12505
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '12505'
[dboci.c      6550]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@PRD on connection 0 ...
C *** ERROR => OCI-call 'olog' failed: rc = 12505
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '12505'
[dboci.c      6550]
C Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@PRD on connection 0 ...
C *** ERROR => OCI-call 'olog' failed: rc = 12505
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '12505'
[dboci.c      6550]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@PRD on connection 0 ...
C *** ERROR => OCI-call 'olog' failed: rc = 12505
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '12505'
[dboci.c      6550]
B ***LOG BY2=> sql error 12505 performing CON [dbsh    0695 ]
B ***LOG BY0=> [dbsh    0695 ]
B ***LOG BY2=> sql error 12505 performing CON [dblink 0627 ]
B ***LOG BY0=> [dblink 0627 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1069]
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   7751]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sap_PRD_00 on host sap (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Sat May 09 21:08:37 2015
M * RELEASE     46D
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        7831
M * COUNTER     1
M *
M *****************************************************************************
M
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2444) [dpnttool.c   300]

Hi,
Restart the listener and try again. If that doesnt work, follow this note - 576919.
Regards
Cyrus

Initialization DB-Connect Failed, Return Code 000256

Hi,
We would like to update the data of our Development system so we tried to do "homogeneous system copy" from our Production system. The problem is that now when we are trying to start SAP on our DEV system the disp+Work process stops and we are getting the following errors in syslog:
SAP-Basis System: Message server disconnected
SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
The system we are using is:
ECC 6.0
Windows 2003
Oracle database
Can someone help us.
Thanks in advanced.

Problem solved.
I run oradbusr.sql script again.
That solved the problem.
thanks anywhay.

How to solve: DB-Connect Failed, Return Code 000256 ?

Hi all experts:
    My operation system: Win2003 server
    database: SQL Server 2000 SP1
    Because of my database error, I have restore database from backup, now the database has started normally, but when I start SAP, in SAP management console, there syslog show error as: DB-Connect Failed, Return Code 000256.
Then I go to F:\usr\sap\QAS\DVEBMGS00\work to see dev_w0, find the error as follow:
X ES initialized.
M calling db_connect ...
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'qas' setuser 'qas']
C HandleOledbError [ExecuteAndFlush,line 36912]: Error/Message: (err 4604, sev 0), There is no such user or group 'qas'.
C setuser 'qas' failed -- connect terminated
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'qas' setuser 'qas']
C HandleOledbError [ExecuteAndFlush,line 36912]: Error/Message: (err 4604, sev 0), There is no such user or group 'qas'.
C setuser 'qas' failed -- connect terminated
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'qas' setuser 'qas']
C HandleOledbError [ExecuteAndFlush,line 36912]: Error/Message: (err 4604, sev 0), There is no such user or group 'qas'.
C setuser 'qas' failed -- connect terminated
C failed to establish conn. 0
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1197]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8847]
M
Can you help me? Thanks a lot.

check note 98678 and 610640
thanks
prince

Problem with Connection to message server "DB-Connect Failed, Return Code "

Hello,
I have the problem that disp+work exe start but after one minute the precedure stopped. The Messages in syslog are "Message server disconnected DB-Connect Failed, Return Code 008192. Can anybody help me?
Best regards Mohamed

trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Oct 09 19:07:25 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\BI7\DVEBMGS70\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\BI7\DVEBMGS70\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\BI7\DVEBMGS70\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      70
M sid        BI7
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    80
M intno      20050900
M make:      multithreaded, ASCII, optimized
M pid        7580
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 7580) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          11440     (880)
M DpShMCreate: sizeof(tm_adm)          3397704     (16904)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm)          528048     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1196)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06350040, size: 4024776)
M DpShMCreate: allocated sys_adm at 06350040
M DpShMCreate: allocated wp_adm at 063519F0
M DpShMCreate: allocated tm_adm_list at 063546A0
M DpShMCreate: allocated tm_adm at 063546D0
M DpShMCreate: allocated wp_ca_adm at 06691F18
M DpShMCreate: allocated appc_ca_adm at 06696568
M DpShMCreate: allocated comm_adm at 06697CD8
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06718B88
M DpShMCreate: allocated gw_adm at 06718BC8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06718BF8
M DpShMCreate: allocated wall_adm at 06718C00
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host ATTNWSRV
M
M Tue Oct 09 19:07:26 2007
M calling db_connect ...
C Process 7580
C GetProfileParameter( wait_and_see ) returned [<null>]
C GetProfileParameter( deadlock_priority ) returned [<null>]
C GetProfileParameter( packet_size ) returned [8192]
C GetProfileParameter( rpc_batch ) returned [<null>]
C batched RPC will be used
C GetProfileParameter( dbsl_profile ) returned [1]
C dbsl profile written to dbsl_w0
C GetProfileParameter( pn_cache_size ) returned [20000]
C GetProfileParameter( par_stmt_cache_size ) returned [500]
C GetProfileParameter( dbcon_pn_size ) returned [<null>]
C GetProfileParameter( dbcon_par_stmt_cache_size ) returned [<null>]
C GetProfileParameter( stats_on ) returned [1]
C GetProfileParameter( network ) returned [<null>]
C GetProfileParameter( sp_prefix ) returned [<null>]
C GetProfileParameter( rdisp/TRACE ) returned [1]
C GetProfileParameter( set_rowcount ) returned [<null>]
C GetProfileParameter( set_fast1 ) returned [<null>]
C GetProfileParameter( use_integrated_security ) returned [<null>]
C GetProfileParameter( conn_str ) returned [<null>]
C GetProfileParameter( ignore_moduledrop ) returned [<null>]
C GetProfileParameter( use_cursor ) returned [<null>]
C GetProfileParameter( cursor_type ) returned [<null>]
C GetProfileParameter( fupd_cursor_type ) returned [<null>]
C GetProfileParameter( set_topn ) returned [<null>]
C GetProfileParameter( short_col_headers ) returned [<null>]
C GetProfileParameter( update_with_updlock ) returned [<null>]
C GetProfileParameter( maxincnt ) returned [<null>]
C GetProfileParameter( transmit_defaults ) returned [<null>]
C GetProfileParameter( square_brackets ) returned [<null>]
C GetProfileParameter( with_recompile ) returned [<null>]
C GetProfileParameter( max_duration ) returned [<null>]
C GetProfileParameter( irow_supported ) returned [<null>]
C GetProfileParameter( ins_block_increment ) returned [<null>]
C GetProfileParameter( max_ins_block_columns ) returned [<null>]
C GetProfileParameter( unc_rd_begin_tran ) returned [<null>]
C GetProfileParameter( use_rpc_call_string ) returned [<null>]
C GetProfileParameter( perm_stmt_reuse_cnt ) returned [<null>]
C GetProfileParameter( batch_stmt_reuse_cnt ) returned [<null>]
C GetProfileParameter( temp_stmt_reuse_cnt ) returned [<null>]
C GetProfileParameter( prepare ) returned [<null>]
C GetProfileParameter( par_stmt_prepare ) returned [<null>]
C GetProfileParameter( profile_with_timestamp ) returned [<null>]
C GetProfileParameter( no_utab_workaround ) returned [<null>]
C GetProfileParameter( use_block_fetch ) returned [<null>]
C GetProfileParameter( connect_retries ) returned [<null>]
C GetProfileParameter( connect_timeout ) returned [<null>]
C GetProfileParameter( use_system_locale ) returned [<null>]
C GetProfileParameter( ignore_stmtids ) returned [<null>]
C GetProfileParameter( recompile_par_stmts ) returned [0]
C GetProfileParameter( subst_params ) returned [<null>]
C GetProfileParameter( provider ) returned [<null>]
C GetProfileParameter( lob_rc ) returned [<null>]
C GetProfileParameter( buffer_cvarlobs ) returned [<null>]
C GetProfileParameter( allow_multipleconnections ) returned [<null>]
C GetProfileParameter( fupdorder ) returned [<null>]
C GetProfileParameter( no_vbdata_workaround ) returned [<null>]
C GetProfileParameter( use_mars ) returned [<null>]
C GetProfileParameter( as_c ) returned [<null>]
C GetProfileParameter( save_stmt_string ) returned [<null>]
C GetProfileParameter( server ) returned [ATTNWSRV]
C GetProfileParameter( user ) returned [<null>]
C GetProfileParameter( passwd ) returned [<null>]
C GetProfileParameter( dbname ) returned [BI7]
C GetProfileParameter( schema ) returned [dbo]
C Warning: Env(MSSQL_SCHEMA) [bi7] <> Prof(dbs/mss/schema) [dbo]. Profile value will be used.
C GetProfileParameter( auth/shadow_upgrade ) returned [<null>]
C GetProfileParameter( add_procs ) returned [<null>]
C Thread ID:7584
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\BI7\DVEBMGS70\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C COMPUTERNAME: ATTNWSRV
C np:(local) connection used on ATTNWSRV
C CopyLocalParameters: dbuser is 'dbo'
C Formatted connect string : [Driver=SQL Server;Server=np:(local);Trusted_Connection=yes;WSID=ATTNWSRV;APP=R3D00(0)comm rd [MDAC] OLEDB]
C
C Tue Oct 09 19:07:27 2007
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Packet size is set to: 8192
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Packet size is set to: 8192
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Packet size is set to: 8192
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Formatted connect string : [Driver=SQL Server;Server=(local);Trusted_Connection=yes;WSID=ATTNWSRV;APP=R3D00(0)comm rd [MDAC] OLEDB]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Packet size is set to: 8192
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Packet size is set to: 8192
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Tue Oct 09 19:07:28 2007
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Packet size is set to: 8192
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'ATTNWSRV\SAPServiceBI7'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ATTNWSRV_BI7_70 on host ATTNWSRV (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Tue Oct 09 19:07:28 2007
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10367
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 7580) [dpnttool.c   327]

Session Task 3 Loading - SS_0 - Load Data FAILS Return Code - 7000

I cannot figure out why this is happening! Any Help is greatly appreciated!
Here are tasks 2 & 3 ...
Operator Session Task:
Step 2 Loading - SS_0 - Create work table
Default: Query / Execution Plan
create table ODI_TEMP.C$_0CONTRACT_AUTOMATION_FACT
C1_PROCESSINSTANCE_ID NUMBER(20) NULL,
C2_WORKFLOW_START_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C3_WORKFLOW_END_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C4_WORKFLOW_NAME VARCHAR2(100) NULL,
C5_AGENCY_CONT_ADMIN_NAME VARCHAR2(100) NULL,
C6_AGENCY_DESIGNATION VARCHAR2(100) NULL,
C7_AGENCY_INITIATING_APRV_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C8_ASSIGNED_CITYATRNY_NAME VARCHAR2(100) NULL,
C9_AUDITOR_SIGN_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C10_AUDITOR_SIGN_NAME VARCHAR2(100) NULL,
C11_AWARD_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C12_BID_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C13_CC_ORDINANCE_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C14_CC_ORDINANCE_NUMBER VARCHAR2(100) NULL,
C15_CC_ORDINANCE_REQUIRED_FL VARCHAR2(10) NULL,
C16_CITYATRNY_SIGN_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C17_CITYATRNY_SIGN_NAME VARCHAR2(100) NULL,
C18_CITY_PROJECT_NUMBER VARCHAR2(100) NULL,
C19_CLERK_FILING_NUMBER VARCHAR2(100) NULL,
C20_CLERK_RECORDER_SIGN_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C21_CLERK_RECORDER_SIGN_NAME VARCHAR2(100) NULL,
C22_COMPETITIVE_BID_CMT VARCHAR2(100) NULL,
C23_COMPETITIVE_BID_FL VARCHAR2(10) NULL,
C24_CONT_AMENDMENT_NUMBER VARCHAR2(100) NULL,
C25_CONT_CONTROL_NUMBER VARCHAR2(100) NULL,
C26_CONT_DESC VARCHAR2(255) NULL,
C27_CONT_EXIST_TERM_END_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C28_CONT_EXIST_TERM_START_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C29_CONT_PROP_TERM_END_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C30_CONT_PROP_TERM_START_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C31_CONT_REQUESTOR_NAME VARCHAR2(100) NULL,
C32_CONT_REQUEST_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C33_CONT_TYPE VARCHAR2(100) NULL,
C34_CONT_WORK_TYPE VARCHAR2(100) NULL,
C35_DOLLAR_AMT_PRIOR_CONT_TOTA VARCHAR2(100) NULL,
C36_DOLLAR_AMT_THIS_REQUEST VARCHAR2(100) NULL,
C37_DSBO_APRV_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C38_INITIATING_AUTHORITY_NAME VARCHAR2(100) NULL,
C39_MAYOR_SIGN_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C40_MAYOR_SIGN_NAME VARCHAR2(100) NULL,
C41_MOFIN_SIGN_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C42_MOFIN_SIGN_NAME VARCHAR2(100) NULL,
C43_NEW_TOTAL_IF_EXECUTED VARCHAR2(100) NULL,
C44_PERSON_PHONE VARCHAR2(100) NULL,
C45_PREVAILING_WAGE_REQUIRED_F VARCHAR2(10) NULL,
C46_PROGRAM VARCHAR2(100) NULL,
C47_REQ_BUSINESS_UNIT VARCHAR2(100) NULL,
C48_RISK_AND_SAFETY_APRV_DT TIMESTAMP (6) WITH TIME ZONE NULL,
C49_TECHSERV_REVIEW_REQUIRED_F VARCHAR2(10) NULL,
C50_VEN_ADDRESS VARCHAR2(100) NULL,
C51_VEN_ID VARCHAR2(100) NULL,
C52_VEN_NAME VARCHAR2(100) NULL,
C53_VEN_SIGN_DT DATE NULL
NOLOGGING
Step 3 Loading - SS_0 - Load Data
Loading: Query / Execution Plan
select
STG_CONTRACT_AUTOMATION.PROCESSINSTANCE_ID C1_PROCESSINSTANCE_ID,
STG_CONTRACT_AUTOMATION.WORKFLOW_START_DT C2_WORKFLOW_START_DT,
STG_CONTRACT_AUTOMATION.WORKFLOW_END_DT C3_WORKFLOW_END_DT,
STG_CONTRACT_AUTOMATION.WORKFLOW_NAME C4_WORKFLOW_NAME,
STG_CONTRACT_AUTOMATION.AGENCY_CONT_ADMIN_NAME C5_AGENCY_CONT_ADMIN_NAME,
STG_CONTRACT_AUTOMATION.AGENCY_DESIGNATION C6_AGENCY_DESIGNATION,
STG_CONTRACT_AUTOMATION.AGENCY_INITIATING_APRV_DT C7_AGENCY_INITIATING_APRV_DT,
STG_CONTRACT_AUTOMATION.ASSIGNED_CITYATRNY_NAME C8_ASSIGNED_CITYATRNY_NAME,
STG_CONTRACT_AUTOMATION.AUDITOR_SIGN_DT C9_AUDITOR_SIGN_DT,
STG_CONTRACT_AUTOMATION.AUDITOR_SIGN_NAME C10_AUDITOR_SIGN_NAME,
STG_CONTRACT_AUTOMATION.AWARD_DT C11_AWARD_DT,
STG_CONTRACT_AUTOMATION.BID_DT C12_BID_DT,
STG_CONTRACT_AUTOMATION.CC_ORDINANCE_DT C13_CC_ORDINANCE_DT,
STG_CONTRACT_AUTOMATION.CC_ORDINANCE_NUMBER C14_CC_ORDINANCE_NUMBER,
STG_CONTRACT_AUTOMATION.CC_ORDINANCE_REQUIRED_FL C15_CC_ORDINANCE_REQUIRED_FL,
STG_CONTRACT_AUTOMATION.CITYATRNY_SIGN_DT C16_CITYATRNY_SIGN_DT,
STG_CONTRACT_AUTOMATION.CITYATRNY_SIGN_NAME C17_CITYATRNY_SIGN_NAME,
STG_CONTRACT_AUTOMATION.CITY_PROJECT_NUMBER C18_CITY_PROJECT_NUMBER,
STG_CONTRACT_AUTOMATION.CLERK_FILING_NUMBER C19_CLERK_FILING_NUMBER,
STG_CONTRACT_AUTOMATION.CLERK_RECORDER_SIGN_DT C20_CLERK_RECORDER_SIGN_DT,
STG_CONTRACT_AUTOMATION.CLERK_RECORDER_SIGN_NAME C21_CLERK_RECORDER_SIGN_NAME,
STG_CONTRACT_AUTOMATION.COMPETITIVE_BID_CMT C22_COMPETITIVE_BID_CMT,
STG_CONTRACT_AUTOMATION.COMPETITIVE_BID_FL C23_COMPETITIVE_BID_FL,
STG_CONTRACT_AUTOMATION.CONT_AMENDMENT_NUMBER C24_CONT_AMENDMENT_NUMBER,
STG_CONTRACT_AUTOMATION.CONT_CONTROL_NUMBER C25_CONT_CONTROL_NUMBER,
STG_CONTRACT_AUTOMATION.CONT_DESC C26_CONT_DESC,
STG_CONTRACT_AUTOMATION.CONT_EXIST_TERM_END_DT C27_CONT_EXIST_TERM_END_DT,
STG_CONTRACT_AUTOMATION.CONT_EXIST_TERM_START_DT C28_CONT_EXIST_TERM_START_DT,
STG_CONTRACT_AUTOMATION.CONT_PROP_TERM_END_DT C29_CONT_PROP_TERM_END_DT,
STG_CONTRACT_AUTOMATION.CONT_PROP_TERM_START_DT C30_CONT_PROP_TERM_START_DT,
STG_CONTRACT_AUTOMATION.CONT_REQUESTOR_NAME C31_CONT_REQUESTOR_NAME,
STG_CONTRACT_AUTOMATION.CONT_REQUEST_DT C32_CONT_REQUEST_DT,
STG_CONTRACT_AUTOMATION.CONT_TYPE C33_CONT_TYPE,
STG_CONTRACT_AUTOMATION.CONT_WORK_TYPE C34_CONT_WORK_TYPE,
STG_CONTRACT_AUTOMATION.DOLLAR_AMT_PRIOR_CONT_TOTAL C35_DOLLAR_AMT_PRIOR_CONT_TOTA,
STG_CONTRACT_AUTOMATION.DOLLAR_AMT_THIS_REQUEST C36_DOLLAR_AMT_THIS_REQUEST,
STG_CONTRACT_AUTOMATION.DSBO_APRV_DT C37_DSBO_APRV_DT,
STG_CONTRACT_AUTOMATION.INITIATING_AUTHORITY_NAME C38_INITIATING_AUTHORITY_NAME,
STG_CONTRACT_AUTOMATION.MAYOR_SIGN_DT C39_MAYOR_SIGN_DT,
STG_CONTRACT_AUTOMATION.MAYOR_SIGN_NAME C40_MAYOR_SIGN_NAME,
STG_CONTRACT_AUTOMATION.MOFIN_SIGN_DT C41_MOFIN_SIGN_DT,
STG_CONTRACT_AUTOMATION.MOFIN_SIGN_NAME C42_MOFIN_SIGN_NAME,
STG_CONTRACT_AUTOMATION.NEW_TOTAL_IF_EXECUTED C43_NEW_TOTAL_IF_EXECUTED,
STG_CONTRACT_AUTOMATION.PERSON_PHONE C44_PERSON_PHONE,
STG_CONTRACT_AUTOMATION.PREVAILING_WAGE_REQUIRED_FL C45_PREVAILING_WAGE_REQUIRED_F,
STG_CONTRACT_AUTOMATION.PROGRAM C46_PROGRAM,
STG_CONTRACT_AUTOMATION.REQ_BUSINESS_UNIT C47_REQ_BUSINESS_UNIT,
STG_CONTRACT_AUTOMATION.RISK_AND_SAFETY_APRV_DT C48_RISK_AND_SAFETY_APRV_DT,
STG_CONTRACT_AUTOMATION.TECHSERV_REVIEW_REQUIRED_FL C49_TECHSERV_REVIEW_REQUIRED_F,
STG_CONTRACT_AUTOMATION.VEN_ADDRESS C50_VEN_ADDRESS,
STG_CONTRACT_AUTOMATION.VEN_ID C51_VEN_ID,
STG_CONTRACT_AUTOMATION.VEN_NAME C52_VEN_NAME,
STG_CONTRACT_AUTOMATION.VEN_SIGN_DT C53_VEN_SIGN_DT
from ALF_STG.STG_CONTRACT_AUTOMATION STG_CONTRACT_AUTOMATION
where (1=1)
Default: Query /Execution Plan
insert into ODI_TEMP.C$_0CONTRACT_AUTOMATION_FACT
C1_PROCESSINSTANCE_ID,
C2_WORKFLOW_START_DT,
C3_WORKFLOW_END_DT,
C4_WORKFLOW_NAME,
C5_AGENCY_CONT_ADMIN_NAME,
C6_AGENCY_DESIGNATION,
C7_AGENCY_INITIATING_APRV_DT,
C8_ASSIGNED_CITYATRNY_NAME,
C9_AUDITOR_SIGN_DT,
C10_AUDITOR_SIGN_NAME,
C11_AWARD_DT,
C12_BID_DT,
C13_CC_ORDINANCE_DT,
C14_CC_ORDINANCE_NUMBER,
C15_CC_ORDINANCE_REQUIRED_FL,
C16_CITYATRNY_SIGN_DT,
C17_CITYATRNY_SIGN_NAME,
C18_CITY_PROJECT_NUMBER,
C19_CLERK_FILING_NUMBER,
C20_CLERK_RECORDER_SIGN_DT,
C21_CLERK_RECORDER_SIGN_NAME,
C22_COMPETITIVE_BID_CMT,
C23_COMPETITIVE_BID_FL,
C24_CONT_AMENDMENT_NUMBER,
C25_CONT_CONTROL_NUMBER,
C26_CONT_DESC,
C27_CONT_EXIST_TERM_END_DT,
C28_CONT_EXIST_TERM_START_DT,
C29_CONT_PROP_TERM_END_DT,
C30_CONT_PROP_TERM_START_DT,
C31_CONT_REQUESTOR_NAME,
C32_CONT_REQUEST_DT,
C33_CONT_TYPE,
C34_CONT_WORK_TYPE,
C35_DOLLAR_AMT_PRIOR_CONT_TOTA,
C36_DOLLAR_AMT_THIS_REQUEST,
C37_DSBO_APRV_DT,
C38_INITIATING_AUTHORITY_NAME,
C39_MAYOR_SIGN_DT,
C40_MAYOR_SIGN_NAME,
C41_MOFIN_SIGN_DT,
C42_MOFIN_SIGN_NAME,
C43_NEW_TOTAL_IF_EXECUTED,
C44_PERSON_PHONE,
C45_PREVAILING_WAGE_REQUIRED_F,
C46_PROGRAM,
C47_REQ_BUSINESS_UNIT,
C48_RISK_AND_SAFETY_APRV_DT,
C49_TECHSERV_REVIEW_REQUIRED_F,
C50_VEN_ADDRESS,
C51_VEN_ID,
C52_VEN_NAME,
C53_VEN_SIGN_DT
values
:C1_PROCESSINSTANCE_ID,
:C2_WORKFLOW_START_DT,
:C3_WORKFLOW_END_DT,
:C4_WORKFLOW_NAME,
:C5_AGENCY_CONT_ADMIN_NAME,
:C6_AGENCY_DESIGNATION,
:C7_AGENCY_INITIATING_APRV_DT,
:C8_ASSIGNED_CITYATRNY_NAME,
:C9_AUDITOR_SIGN_DT,
:C10_AUDITOR_SIGN_NAME,
:C11_AWARD_DT,
:C12_BID_DT,
:C13_CC_ORDINANCE_DT,
:C14_CC_ORDINANCE_NUMBER,
:C15_CC_ORDINANCE_REQUIRED_FL,
:C16_CITYATRNY_SIGN_DT,
:C17_CITYATRNY_SIGN_NAME,
:C18_CITY_PROJECT_NUMBER,
:C19_CLERK_FILING_NUMBER,
:C20_CLERK_RECORDER_SIGN_DT,
:C21_CLERK_RECORDER_SIGN_NAME,
:C22_COMPETITIVE_BID_CMT,
:C23_COMPETITIVE_BID_FL,
:C24_CONT_AMENDMENT_NUMBER,
:C25_CONT_CONTROL_NUMBER,
:C26_CONT_DESC,
:C27_CONT_EXIST_TERM_END_DT,
:C28_CONT_EXIST_TERM_START_DT,
:C29_CONT_PROP_TERM_END_DT,
:C30_CONT_PROP_TERM_START_DT,
:C31_CONT_REQUESTOR_NAME,
:C32_CONT_REQUEST_DT,
:C33_CONT_TYPE,
:C34_CONT_WORK_TYPE,
:C35_DOLLAR_AMT_PRIOR_CONT_TOTA,
:C36_DOLLAR_AMT_THIS_REQUEST,
:C37_DSBO_APRV_DT,
:C38_INITIATING_AUTHORITY_NAME,
:C39_MAYOR_SIGN_DT,
:C40_MAYOR_SIGN_NAME,
:C41_MOFIN_SIGN_DT,
:C42_MOFIN_SIGN_NAME,
:C43_NEW_TOTAL_IF_EXECUTED,
:C44_PERSON_PHONE,
:C45_PREVAILING_WAGE_REQUIRED_F,
:C46_PROGRAM,
:C47_REQ_BUSINESS_UNIT,
:C48_RISK_AND_SAFETY_APRV_DT,
:C49_TECHSERV_REVIEW_REQUIRED_F,
:C50_VEN_ADDRESS,
:C51_VEN_ID,
:C52_VEN_NAME,
:C53_VEN_SIGN_DT
Execution Error
Session Task fails with
Status: Error
Return Code: 7000
java.lang.ClassCastException
at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7822)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7546)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:7919)
at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)

Micheal,
You didnt specify the KMs that you are using. I guess you are using LKM SQL to SQL or SQL to Oracle.
From your diagnosis of the timestamp data, I would like to add that while using LKM SQL to SQL, it uses Java APIs to load the data. Java timestamp format is different from Oracle timestamp.
There is thread that talks about this (File based datastore and using date format in those columns) but am unable to locate it.
Also, this could be a Java compatibility issue. So upgrading a driver to ojdbc6.jar may help.
Re: JAVA JDK
If your source and target are both Oracle, then consider using LKM Oracle to Oracle (DBLINK). This will be superfast compared to other KMs as it does a set based processing vs. row based processing that the SQL to SQL km does.

Sccm 2012 application deployment fail

Hi Gents
I am attempting to deploy applications to a test machine. The software deployment reaches the test machine in the software center but it fails.
One Application had the status "Past due - will be installed"
The rest just state "Fail" with more information saying:
"The software change returned error code 0x80070005 (-2147024891)
I've been googling away here and iwll continue to do so until i find a resolution but hopefully you guys can help point me in the right direction.
Thanks for the help guys
Lee

Ok i got it to a point where the status of the applications is "waiting to install" so they download fine but not actually installing. I followed this link:
http://777notes.wordpress.com/2012/08/17/sccm-2012-local-content-cach-failed-for-workgroup-machine/ anbd enabled the anonymous checkbox. But still the apps arent installing.

MDT 2012 - Litetouch deploy windows 8 with different administrator account

I have created and captured a custom image of Windows 8 using MDT2012 update 1 and Windows ADK (without SCCM). In the image, I have set an account called DeployUser, with password XXX, adding it to the Administrators group, and I have disabled the User
Account Control.
I did this because the Administrator account is renamed from GPO and the password is changed every 30 days (for security reasons, the password is not disclosed to any IT support).
Next, I created a TS to deploy this image, adding the installation of some software.
In the Unattend.xml, I also added DeployUser to perform the autologon.
After the first logon with DeployUser, the TS stops and does not return any error message.
If I manually run C: \ ProgramData \ Microsoft \ Windows \ Start Menu \ Programs \ Start-up \ LiteTouch.lnk nothing happens, however, if I run it with "Run as Administrator", the TS continues normally.
Somebody who knows a solution for this?

I believe MDT LiteTouch deployments only recognize the Administrator account name for processing task sequences.
Are you joining the domain during an MDT Litetouch deployment? If so, you may want to delay joining to a domain or GPO processing. Take a look at these recommendations:
Domain Policies that break MDT 2010
It may also be possible to disable GPO processing until the end of the taks sequence via a reghack or disabling a service. Take a look at this:
How to Disable/Enable Group Policy
BTW, the task sequence engine in ConfigMgr prevents GPO processing during an OSD.
V/R, Darrick West - Senior Systems Engineer, ConfigMgr: OSD

MDT 2012 UNC Deployment Failure with static IP.

I am having trouble getting my UNC deployment to run the State Restore phase. I am operating on a network without DHCP and have successfully connected to the network share and ran the Task Sequence. After the reboot, however, the static ip doesn't get set
and the deployment can't continue.
Upon inspection of the BDD.log I ran across the entry in the State Restore section that pertains to setting the static ip.
WMI Function: Adapter.EnableStatic(IPAddress,SubnetMask) FAILURE: -2147217405 Unknown Error: -2147217405
If I log in and run the LiteTouch.wsf file as an administrator, the task sequence starts running again and the static ip gets applied.
Why is this not happening automatically?

The account I'm using does have permissions. I use the same account to join manually after the process is complete. I'm not sure what the purpose of the Temp Account is. I only see it if the process fails. Otherwise, if the process completes, it is not there
when I log in. The Administrator account is disabled by Group Policy but since it never joins the Domain, the Administrator account doesn't get disabled.
There is no ZTIDomainJoin.log
NetSetup.log is as follows:
NetpDomainJoin
NetpMachineValidToJoin
OS Version: 6.1
Build Number: 7601 (7601.win7sp1_ldr.130828-1532)
ServicePack: Service Pack 1
SKU: Windows 7 Enterprise
NetpGetLsaPrimaryDomain: status: 0x0
NetpMachineValidToJoin: status: 0x0
NetpJoinWorkgroup: joining computer 'MININT-TBQSA02' to workgroup 'WORKGROUP'
NetpValidateName: checking to see if 'WORKGROUP' is valid as type 2 name
NetpCheckNetBiosNameNotInUse for 'WORKGROUP' [ Workgroup as MACHINE ] returned 0x0
NetpValidateName: name 'WORKGROUP' is valid for type 2
NetpSetLsaPrimaryDomain: for 'WORKGROUP' status: 0x0
NetpJoinWorkgroup: status: 0x0
NetpDoDomainJoin: status: 0x0
Now I realize that it appears to be joining the "Workgroup" Workgroup, but in my customsettings.ini I have the JoinDomain variable set to the proper domain.

Deployment Failed - Error Codes

Hi.. Again!!!
I'm deploying an App-V Package to a couple of test machines but on the deployment monitoring I get:
Error Code:
0x80070002 (-2147024894)
Error Description:
The system cannot find the file specified.
Does anyone know what I can do here? I've created a whole new deployment etc and still no luck, I'm not sure where I can look to be able to see what file it's actually talking about to try and resolve the issue. Can anyone point me in the right direction?
Thanks... again!!!
Jay

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
What does the VirtualApp.log log say?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

MDT 2012 Litetocuh Deployment Failed, Return Code = -2147467259 0x0004005

Similar Messages

Maybe you are looking for