MDT 2012 Refresh Scenrio, USMT to Network, only captures settings but not restoring

Hi
I really appreciate your help on the following scenario:
1. MDT 2012 installed with WAIK 7 (USMT 4.0)
2.CustomSettings.ini includes those parameters:
UserDataLocation=NETWORK
UDShare=\\mdt\UserData
UDDir=%Computername%
3.after Windows 7 migration I can see in UserData folder the migrated Computer name folder which contain USMT folder and a .mig file
4.unfortunatly, the migration does not process the "Restore User State" Task
note: if I'm looking at the BDD log I can see a line: "No user state to restore, exiting"
PLEASE HELP!
אם תשובתי סייע בפתרון לשאלה, אנא הצבע כמועיל, תודה. Best Regards, Ori Husyt - אורי הוסיט

You could try running the script manually (needs to be run before the final summary screen):
cscript.exe ZTIUserState.wsf /debug:true
See if that gives you anything to go off via the command line.
Nope didn't change a thing in the log file of any significance.  Still says that there is no user state to restore in ZTIUserState.log

Similar Messages

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • HT204150 My Contact from ICloud imports only the name but not every thing else. But that only happens with my own card

    My Contact from ICloud imports only the name but not every thing else if I want to import it to Contact on my Mac. But that only happens with my own card.
    Before, my V-Card in Contacts on my Mac was ok, but now it disappeared. When I try to import it from ICloud only my name appears.
    Can anyone help me? Thanks

    The backup of your iPod Touch would include your camera roll photos.  Restoring the backup to another iPod Touch or iPhone would recover them.  Photos will not be restored by restoring the backup to an iPad.
    Note: Apple deletes iCloud backups after 180 days of inactivity so be sure to do this before then.

  • My purchases are only in "purchases" but not in Mediathek Music

    My purchases are only in "purchases" but not in Mediathek Music. How to move them to the Mediathek?
    BR Wolfgang

    Oh, rats. Do I need to remove the folder that I published to? I'm not even sure where to find it. I have republished successfully with the comments still in iweb but they don't show up on-line. I'd really like to get them back on if possible.

  • I have to open website which opens only with google but not from safari. how can i get such google?

    i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

    The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

    I've reset the password a few times and know I am using the correct one. I get the same error on both my iPad and iPhone. Both see the network but maybe there is a problem with the router. I've also reset that a few times with no luck. Thank you.

  • HT1414 Can I upgrade my Iphone 4 to only ios 5 but not ios 6 now?

    Can I upgrade my Iphone 4 (4.3.3) to only ios 5 but not ios 6 now?

    No.
    Any update is to the latest version of iOS for your Device.

  • WRT54G v.6 - Vista forgetting Network settings but not on XP? - help please :)

    Hello everyone! I hope someone can shed a bit of light on this, it's driving me crazy!
    I am using a WRT54G v.6 and Vista Ultimate and a dual-boot with XP on my desktop computer. I also have a laptop with Vista Home Premium. I have cable internet. Here's the thing:
    Sometime ago I lost my internet connection. A friend with the same router told me to unplug the router for a day and that it'll do the trick. It did... partially.
    I pluged it, inserted the installation CD (please keep in mind that I have no router knowledge at all) and everything went fine, until I shut down my computer. At the moment I had connected the desktop and laptop. When I turned the desktop on with Vista, it could not connect to the internet, although the laptop had no problems at all.
    I connected the modem directly to my computer and internet was fine, but if I plug it back to the router, nothing happens. So, I had to do the same thing again: unplug for a day, restart the settings and it's a go. I've done that so many times it's not funny anymore
    If I put my computer into hybernation, the router/vista works fine, but if i shut it down, I lose my internet connection on Vista.
    Has anyone dealt with these before? I'd really appreciate your help, and sorry for the long post
    Edit:
    Right now I had to install an update on my desktop. First, I intalled the recent firmware upgrade, reset all settings again and configured the router. Everything was fine. I installed the Windows update, had to reboot and bam! I lost my connection. I'm on the laptop right now.
    I can't even access the router on my desktop via 192.168.1.1. I have a limited or no connectivity message. It appears I have 2 networks, both public (I also tried private and nothing). I don't have internet access on none of them, although I did have before rebooting the computer). I don't have the warning icon anymore, tho.
    I tried to merge/delete the connections and it "appears" as one of them was deleted, but it's still there. It says: Network 2 (the name of the network) it's in use, and under type says: unmanaged. But still no internet connection on that computer.
    After some minutes, I was able to access the router via 192.168.1.1, but still no internet...
    jtMessage Edited by jt001 on 04-03-200706:37 PM

    Hello Klatch! Thanks for your reply!
    Well, thing is that it used to work before. Of course, I'll definately check if an update is available
    All these issues began maybe a month or 2 ago. Everything was working flawlessly. One time, I lost my connection and that's where everything got messed up.
    My main problem is that I get this "Unidentified Network" in the network and sharing center that seems to be causing the problem, as far as I know.
    I connect the router and get the Unidientified Network icon, plus another one. I deleted one, but it was still there. Even if I try to merge them, nothing happens.
    I even connected the modem directly and could not connect to the internet for some time, because Vista was still looking for the previous setting (back when the router was working). I had to unplug the modem several times, reboot, etc. I tried so many things that I lost track of what made the computer work again :lol.
    I tried to connect the router last night and nothing. The only thing that seems to work is unplugging the router for a long time/resetting it, then Vista will make the connection, but if I restart, the internet it's gone.Message Edited by jt001 on 04-05-200705:31 AM

  • 755p - How to sync only Exchange email but not calendar or contacts?

    I successfully set up my new 755p to sync with our Exchange server at work, but I noticed that ALL of my work contacts were now on my Treo, and vice-versa. When I go to the settings for email by using Options -> Preferences -> Auto Sync there are 3 check boxes, one each for Mail, Calendar, and Contacts. I thought this was my solution but unfortunately when I check one box, they all check. And when I uncheck one box, they all uncheck. Why are there 3 separate check boxes here if they all work together or none at all? And if there is no way to individually check a box, how can I have my Treo 755p only sync with my Exchange email, and not with my contacts or calendar? I do not want all my personal contacts on my Treo getting sent to my work Exchange contacts. I only need the sync feature to get my work email delivered to my Treo when I'm not in the office. Thanks.
    Post relates to: Treo 755p (Sprint)

    Unfortunately EAS in Versamail 3.5 is an all or nothing option.  In the product information if you were purchasing Versamail 3.5 is the Using built-in Microsoft Exchange ActiveSync, wirelessly sync Calendar, Contacts, and email with your company's Microsoft Exchange Server 2003 (access enabled by your IT administrator). Or, access business email using POP or IMAP and a compatible Virtual Private Network (VPN) client (sold separately).   The Guidelines for EAS on Exchange Server 2003 with MSFP (message and security feature pack) puts out the specification for Windows Mobile devices to sync Email, Calendar, Contacts and Tasks to Exchange server and any other partnership can do files, favorites, notes, media but the PIMS once enabled to go through EAS will only go through EAS until that partnership is removed. On a Palm OS based device the 755 is compatible for Direct Push email, calendar and contacts sync as well as some policy enforcement from the Mobile Access Admistrator plugin for Exchange 2003 such as PW enforcement, remote wipe.  The specifications made the rules.  Versamail 3.5 on the Treo 755 just follows them.

  • Crash Affecting only One Login - But Not in Safe Mode

    I have an iMac (built-in iSight) that suddenly has problems with only ONE login (the other accounts on the machine work fine). The troubled login won't mount the desktop at all, even with the entire library folder removed. Ran DW utility, but that didn't help. The interesting thing is, if I boot in SAFE mode, the problem goes away.
    What am I missing? If there's a problem with some bit of startup code, driver, etc., why is it only affecting one login?
    I realize my info above is sketchy. Hoping it might be enough for somebody to offer a clue... thanks.

    Hi, Lonestar.
    An errant Startup or Login Item maybe the cause. In this case, it would likely be a Login Item defined in the affected account. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem. Focus on the instructions concerning Login Items with the affected account.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Save a pdf with security so vendors can only import & print but not extract?

    We submit ads to newspapers all the time in pdf format...the newspaper imports the pdfs into their page layout program (Quark) for printing...currently we do not put any security on the pdfs because the vendors can not import the pdf into their page layout program Quark with security on.
    Is there a way we can set security so the only thing the newspaper can do is import the pdf into Quark (or a page layout program) and print?
    We would like to restrict the use of exporting artwork and copy from the pdf as well as saving the pdf as different formats.

    We just launched a new DATING SITE! Meet singles from all over the world! FREE registration for the first 500 users! Register now and find thousands of great singles in your area! Visit www.NYDateNet.com

  • HOW TO SEND PERSONALIZED EMAILS (WITH SAME MESSAGE) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR NAME BUT NOT WHO ELSE IS GETTING IT

    HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
    ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?

    In the csv file, the column headers must match the the special references in curly brackets.
    So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
    To change the column header:
    In the example shown below, I wanted to use the first two columns
    'First Name', 'Last Name' note the exact spelling.
    I also wanted the email address which was in a column called 'Primary Email'.
    To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
    But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
    At this point check that all the contacts do have a valid email address.
    then save the file.
    If you do not want to edit the .csv file, then you need to edit the template email.
    eg: {{First Name}} {{Last Name}} <{{Email}}>
    change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
    If still having an issue, please post two images.
    One image needs to show the row of column headers used in .csv file.
    The other image needs to show the Template email, so I can see how you have used the curly brackets.

  • Only see Computers & Settings but not location opt. avail to fix

    I am having the same problem as many others, all of a sudden the only icons available to me are Computers and Settings. I have read many of the posts and they all pretty much say to either restart or reset the apple tv / modem or all. Check, I've done all that. The next thing everyone says it to go to Settings/ itunes store and make sure the Location is correctly set. Problem-- When I go to Locations in the itunes store there is nothing listed. I go into the Location option and nothing shows up. There are no options to choose, no nothing. Can anyone help?

    Ok, all of a sudden an option for an new update appeared. I downloaded the update and all is right with the world again.

  • I can only import SD, but not HD

    I just got a new iMac for christmas with Leopard and the new iMovie, which supports AVCHD. However, when I try to import my movies into iMovie, it only gives me the option to import my SD videos. I can't even see my HD videos.
    So, I was wondering how I can import my SD videos AND my HD videos, or perhaps, why I can't.

    I have a similar problem....I am trying to import HD footage from my external drive into imovies HD. When I import the footage, I am unable to view it. The clip is there, but it will not display anything other than a black screen. I have a G4 Powerbook. The footage was imported into final cut pro on a G5, then copied over to my external drive for me to use on my computer. I have changed the video type to HD 1080 when creating the movie???
    Any help would be appreciated!!

Maybe you are looking for