MDT 2012 U1 LTI Format incorrect partition

Hi, everyone:
I recently update for xp to Win7 use MDT 2012 Update 1. Everything looks can be, but except for some individual strange question.
Details are follows:
The original xp partition C: is Primary partition, also system disk; other is extended partition, including D and E drive.
After performing MDT task sequence (disabled "format and partition disk" step for only format C:), this machine D drive formatted and put wim applied to the D drive.
On xp running wmic results are as follows:
C:\>wmic path win32_diskpartition get bootable,bootpartition,caption,description
Bootable BootPartition Caption Description
FALSE Disk #0, Partition #0 Extended w/Extended Int 13
TRUE TRUE Disk #0, Partition #1 Installable File System
diskpart:
DISKPART> list part
Partition ### Type Size Offset
Partition 1 Primary 24 GB 32 KB
Partition 2 Extended 125 GB 24 GB
Partition 3 Logical 49 GB 24 GB
Partition 4 Logical 76 GB 73 GB
Finally, I found that if the disk 0,partition #1 is C driver, the task sequence will fail.
Anyone have a solution? Thanks.

espero y te ayude estas opciones dentro de MDT
http://blogs.itpro.es/octaviordz/2013/09/27/crear-particiones-de-windows-con-mdt-2012/
Freelance-IT http://www.freelance-it.com.mx

Similar Messages

MDT 2013 Fails to Format or Partition disk on Surface Pro 3

I have been trying to image a Surface Pro 3 using MDT 2013 and have been unable to get past the Format and Partition portion of the deployment. At first I would get an error that it was unable to format or partition the drive and then after that it
just reboots after trying for so long. I am able to image any other device with the same task sequence and have no issue just having an issue with the Surface Pro 3. Any help would be great.
Thanks in advance.
I am getting the error FAILURE (5210)
ZTI Error - Unhandled error returned by ZTIDISKPART: Object required (424)

I think our problem is also hardware failure although without re-imaging a working surface pro 3 I can't be sure.
I tried what imfusio suggested in this thread.
https://social.technet.microsoft.com/Forums/en-US/d31384bc-4e96-4a5b-a400-637bd6006d81/failure-5456-unable-to-determine-destination-disk-partition-and-or-drive-surface-pro-3?forum=mdt
Unfortunately the deployment failed with the same ZTI Error - Unhandled error returned by ZTIDISKPART:
Object required (424)
I then rebooted into WinPE and ran diskpart, I could see the two volumes (EFI and OSDisk). I then tried to format the OS disk volume using diskpart. I got a paramater is incorrect error and the disk was no longer visible with a 'list disk' command. So it's
like the format is putting the disk offline. I'm going to try restore one of these surfaces, apply all firmware updates then re-image. If that doesn't work I'm out of ideas.

MDT 2012 Format & Partition

Question is this. Already using Microsoft Deployment Toolikt, but I can not solve one problem.
Have a client computer. It has one hard drive, which is divided into 2 partitions (C, D). In C of course is a system, the disk D - all user data.
So how to set the Task Sequence install Windows 7, so it did not remove all partitions & creating OSDisk with volume equal to the entire disk? That is, you can install the operating system on drive C, with no change in partition D.
I tried to disable default task "Format And Partition", added the script with diskpart (read somewhere on the forums):
select disk 0
select partition 1
format fs=NTFS Label="System" Quick
exit
As a result, an error that can not be found boot partition (FAILURE: Boot Drive was not found, required?)

Format and Partition Disk
This task sequence step configures and formats disk partitions on the target computer.Following is a brief listing of the settings that show how this step was originally configured in one of the MDTtask sequence templates.
For more information about what script accomplishes this task and what properties are used, seeZTIDiskpart.wsf.
The default configuration of the Format and Partition Disk task sequence step is:
Properties
Name
Value
Type
Format and Partition Disk
Name
Format and Partition Disk
Description
Not specified
Settings
Name
Value
Disk number
0
Disk type
Standard (MBR)
Volume
Within the Volume setting, the following sub-settings are configured:
Partition Name. OSDisk
Partition Type. Primary
Use a percentage of remaining space. Selected
Size(%). 100
Use specific drive size.Not selected
Make this a boot partition. Selected
File System. NTFS
Quick Format. Selected
Variable.Not specified
Options
Name
Value
Disable this step
Not selected
Success codes
0 3010
Continue on error
Not selected
Conditional qualifier
Not specified
Note When using the CustomSettings.ini file to specify the hard disk and partition configurations, only the first hard disk and first two partitions will be configured. Edit ZTIGather.xml
to configure additional hard disks or partitions.
Freelance-IT http://www.freelance-it.com.mx

Task Sequence Windows Server 2012 format and partition issue when using MDT2012

Hi all,
Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
attached.
We've configured multiple format and partition disk steps to create the following partition layout:
Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
Disk 1: 40GB Programs
Disk 2: 40GB Data
Disk 3: 25GB User
When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
letter D.
The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
<![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
<![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
type="1" thread="776" file="commandline.cpp:827">
<![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
<![LOG[Diskpart.exe STDOUT:
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: SRV03
Volume 1 is the selected volume.
DiskPart successfully removed the drive letter or mount point.
The volume you selected is not valid or does not exist.
There is no volume selected.
]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
This is the output in the diskpart_script.log file:
select volume D
remove letter=D
select volume D
remove letter=D
select volume E
remove letter=E
select volume F
remove letter=F
select volume H
remove letter=H
select disk 0
select partition 1
assign
select disk 1
select partition 1
assign
select disk 2
select partition 1
assign
select disk 3
select partition 1
assign
It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
all looks ok showing no errors in the smsts.log file.
I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk.
Anyone seen this behavior?

I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?

MDT 2012 - Recovery Partition

Hi Guys,
Is there a way to create a windows recovery partition using MDT 2012? I have read and came across a couple of old threads but it didn't help at all. Please see below:
- http://social.technet.microsoft.com/Forums/en-US/cd6c95ad-1772-4020-acd0-2d95e04f42ee/recovery-environment?forum=mdt
- http://www.stephan-schwarz.net/?p=77
Cheers,
Ken

Hi,
Thanks for input.
I have followed Stephan's procedure but it was unsuccessful during the last step of capturing the image. I have implemented my own method and it is now working.
Regards,
Ken

Deploy windows8 with custom partition using MDT 2012 update 1

Hi,
I am deploying windows 8 using MDT 2012 update 1 on SCCM 2012. I want C drive (to be quick format using task sequence) and D drive (remains same) on new system. While using diskpart , my D drive always get format . Can anyone suggest the steps.
Regards
Manish

Hi,
You could try steps in the following blog.
http://arnavsharma.net/4/post/2014/02/mdtformatting-only-c-drive-during-upgrade.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MDT formated second partition instead of first one

Hi
I have diskpart script in preinstallation task sequence
SELECT disk 0
SELECT partition 1
FORMAT FS=NTFS LABEL="System" QUICK
EXIT
And I have "Install Operating System" step configured to install OS on first disk and first partition.
Everything works great, but there are some old WinXP computers that have OS files on disk C: and boot files on disk D:
So, the second partition has boot files and is being active. MDT wizard wiped out this partition and installed OS there. Why?
How to prevent it?

Thank for replies.
Keith Garner, my C: drive is my first partition for sure. Let me explain little bit more.
What I had before:
two partitions/volumes:
1st partition according to diskpart -- Volume C: -- 200GB size -- OS files (Windows, Program Files, etc.)
2nd partition according to diskpart -- Volume D: -- 260Gb size -- Boot files (ntldr, boot.ini, etc) -- Active
What I have after:
1st partition -- Volume C: -- 200GB -- no files (seems to be formatted)
2nd partition -- Volume D: -- 260GB -- old data is deleted, only new OS files (Windows, Program Files, etc) -- --- still Active
fapw, yes I want to preserve second volume. And actually I do it. It works great except some old computers, that were prepared many years ago with boot files
on the second partition.
Unless you explicitly say to not create extra partitions your OSDisk is not the first partition.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Deployment to an UEFI enabled system using a custom Format and Partition Disk Task does not work

Hello all,
I know that MDT 2012 Update 1 has the necessary intelligence to create the GPT partition etc. when the Gather Process detects that the system is UEFI enabled. However i wanted to configure the Format and Parition task myself, so i copied the default one,
disabled it and just added a new one with the following configuration.
Disk Number 0
Disk Type = GPT
i then added
EFI, Partition Type = EFI, 500 MB, file system FAT32
MSR, 128 MB,
OSDisk 40 GB, PRIMARY
i then start the Win8 x64 Task Sequence , it formats the disks, it applies the image, but then when it reboots i cannot boot.
What am i doing wrong here ?
Alsx Verboon www.verboon.info

Is this of any help?
http://social.technet.microsoft.com/Forums/en-US/mdt/thread/a6679550-a343-463c-9301-1bf9706ad9af/
http://blogs.technet.com/b/mniehaus/archive/2011/06/11/mdt-2012-beta-1-uefi-support.aspx

MDT and Macs running Bootcamp – worked in MDT 2010, now does not in MDT 2012

I haven’t been able to find much info on this so I thought I would try here and see if anyone can help.
We’ve been using MDT 2010 for the last couple of years to install Windows 7 on Macintosh’s running Bootcamp and it’s been working fine.
We recently upgraded to MDT 2012 and the same process we used to use for this does not work anymore and I would like to find out how to make it work on 2012.
Here’s how the process works:
First, setup Bootcamp on the Mac. This creates another partition on the Mac for the Windows OS (partition 3 for MAC OS 10.6 and lower, partition 4 for OS 10.7 Lion because of the recovery partition).
Unfortunately Bootcamp cannot create NTFS partitions so it formats it as FAT32.
We then create a standard client task sequence using MDT and the Windows 7 source files (not a custom image) and give it a name to make it obvious it’s for Mac’s – “Windows 7 for Macintosh running Bootcamp”.
We edit that task sequence and disable the built in “Format and Partition Disk” step since we don’t need to create the partition, only format it as NTFS.
We then create a custom diskpart.txt file called BootCamp_Lion.txt with the following contents:
SELECT DISK 0
SELECT PARTITION 4
FORMAT FS=NTFS QUICK OVERRIDE
We place this file in the “Extra directory to add” location we’ve specified in the Win PE Customization section so it is located on the root of X:\ when it boots into Win PE.
We then add a command line to the task sequence: diskpart.exe /s x:\BootCamp_Lion.txt
to format the existing bootcamp partition as NTFS. Then in the “Install Operating System” step we set it to apply to a specific disk and partition – Disk 0, Partition 4.
This installs Windows 7 on the Bootcamp partition and leaves the Mac OS intact and has been working fine in MDT 2010.
Now with MDT 2012, the task sequence starts fine, formats the partition, installs Win 7, but when it comes up in the full OS for the first time I get the error “Unable to find the SMS Task Sequencer.
The deployment will not proceed.” And the task sequence stops.
I know the partitioning part has changed in 2012 and have read that you can get this error if you deploy to something other than disk 0, partition 1 but I’m wondering if I can accomplish the same thing that I used to have working in 2012.
Is there a different way I can do this? Any help would be appreciated.
Thanks,
Robb

Hi Guys
I have been having the same problem.
What I have done to get around it is
add a custom command as we all did in MDT 2010 to format partition 3 or 4 depending on the version of OSX
don’t disable the Format and Partition Disk task but tick in create active partition then remove the partition properties and then click on options and check
continue on error
then under install operating system change the partition that you want to have windows installed on
Once the deployment has completed you will receive the message that deployment has completed but with one error
Hope this helps
Regards
Matthew

Deployment Failure - thick image - (5627) dism.exe (MDT 2012 Update 1)

I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.
I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer.
However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).
Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.
https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105
Here's a snip of the results
<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>
Please advise.
Thanks in advance.

I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.
I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer.
However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).
Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.
https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105
Here's a snip of the results
<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>
Please advise.
Thanks in advance.
Hi Mathew,
I have the similar error deploying a image (no sysprep) using the standard client task sequence. There are 2 partitions, one 500MB for boot and the other remaining partition is for OS. Do you have solutions to resolve the errors? Greatly appreciate
any advice given. Thanks.
Regards,
Eng Chai
Eng Chai

Use the default format and partition step to format disk0 partition 1 in multiple disks sutiation

As we know,we need to disable the default format and partition step in ts to let mdt deploy os on C and leave the other partitions stay safe when there is only one disk on pc，and the way of installing operation system is logical drive letter store in a varible.
But what if there are 2 disks on pc，and for a record the disk 0 is always the OS disk,don't need to confirmed this.How can we modify the format and partition step to format only C on disk0 under this condition?then lead the mdt to do the rest deployment
by itself.
Thanks

You are pushing up against the design limits of MDT, and the more complex and/or arbitrary the disk configuration the harder it is for MDT to perform installations.
If you want to maintain the *existing* disk configuration, and just update the OS present, then the recommended course of action is to run MDT from *within* the OS (cscript.exe
\\server\deploymentshare$\scripts\litetouch.vbs), not from WinPE. When you do this, it's called a "refresh" scenario. MDT can capture the user files via USMT, and it knows which
partitions to use, because it's launched from within the OS itself.
Disabling the default Format and Partition step has other unintended consequences.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

MDT 2012 U1 Blue Screen on task sequence ??

My Customer have MDT 2012 U1, so when he start a task sequence when the task start apply operating system, after the system restart and when the computer install the system the blue screen appear. It is very strange beacause the same task sequence work on
some other model but in this Lenove M82 (3306-G1F) and M82 (M3395-AB4) we have the same error. But on other Lenovo model the same task work very fine. Why?
SMSTS.log
We do not find an available volume to store the local data path TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a TS execution environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSInstructionStackString=22 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a TS execution environment variable _SMSTSInstructionStackString=22 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Save the current environment block TSManager 2014-09-11 08:54:07 1892 (0x0764)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save environment to (80070057) TSManager 2014-09-11 08:54:07 1892 (0x0764)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
Unknown error (Error: 80070057; Source: Unknown) TSManager 2014-09-11 08:54:07 1892 (0x0764)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to persist execution state. Error 0x(80070057) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save execution state and environment to local hard disk TSManager 2014-09-11 08:54:07 1892 (0x0764)
Start executing an instruciton. Instruction name: New Computer only. Instruction pointer: 24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSCurrentActionName=New Computer only TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Evaluating an AND expression TSManager 2014-09-11 08:54:07 1892 (0x0764)
Evaluating a variable condition expression TSManager 2014-09-11 08:54:07 1892 (0x0764)
Variable = DeploymentType TSManager 2014-09-11 08:54:07 1892 (0x0764)
Value = NEWCOMPUTER TSManager 2014-09-11 08:54:07 1892 (0x0764)
Operator = equals TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: equals TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: DeploymentType TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: NEWCOMPUTER TSManager 2014-09-11 08:54:07 1892 (0x0764)
The variable condition expression is evaluated to be TRUE TSManager 2014-09-11 08:54:07 1892 (0x0764)
The AND expression is evaluated to be TRUE TSManager 2014-09-11 08:54:07 1892 (0x0764)
The condition for the group (New Computer only) is evaluated to be true TSManager 2014-09-11 08:54:07 1892 (0x0764)
The group (New Computer only) has been successfully started TSManager 2014-09-11 08:54:07 1892 (0x0764)
Sending status message . . . TSManager 2014-09-11 08:54:07 1892 (0x0764)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2014-09-11 08:54:07 1892 (0x0764)
User did not specify local data drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume D:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume X:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume Z:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
BDD.log
Property LogPath is now = X:\MININT\SMSOSD\OSDLOGS LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Property Debug is now = FALSE LiteTouch 2014-09-11 08:53:34 0 (0x0000)
ZTIUtility!GetAllFixedDrives (Faux) LiteTouch 2014-09-11 08:53:34 0 (0x0000)
ZTIUtility!GetAllFixedDrives = LiteTouch 2014-09-11 08:53:34 0 (0x0000)
No task sequence is in progress. LiteTouch 2014-09-11 08:53:34 0 (0x0000)
New ZTIDisk :
\\MININT-KGJQ3PL\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0" LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Found Possible OS TargetDisk:
\\MININT-KGJQ3PL\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0" LiteTouch 2014-09-11 08:53:34 0 (0x0000)
GetPartitions: 0 LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Did not find disk. LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Property SMSTSLocalDataDrive is now = LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Unable to connect to BCDStore. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Not running within WinPE or WinRE. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeploymentMethod is now = UNC LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeploymentMethod = UNC LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeployRoot is now = X:\Deploy LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Using a local or mapped drive, no connection is required. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeployRoot = X:\Deploy LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeployDrive is now = X: LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeployDrive = X: LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property PHASE is now = PREINSTALL LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeploymentType is now = NEWCOMPUTER LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Phase = PREINSTALL LiteTouch 2014-09-11 08:53:40 0 (0x0000)
About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property inifile is now = Bootstrap.ini ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
------------------------- Object Initialization ------------------------- ZTIGather 2014-09-11 08:53:40 0 (0x0000)
------------------------- Initialization ------------------------- ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Synchronizing the environments. ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DeployRoot is now = X:\Deploy ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DeployDrive is now = X: ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished synchronizing the environments. ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property definition is now = BDD_Welcome_ENU.xml Wizard 2014-09-11 08:53:40 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 Wizard 2014-09-11 08:53:40 0 (0x0000)
Getting OS info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSCurrentVersion is now = 6.1.7601 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSCurrentBuild is now = 7601 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSVersion is now = WinPE ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IsServerOS is now = False ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IsServerCoreOS is now = False ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting OS info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Getting HAL information ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Not Wizard = Faux Wizard 2014-09-11 08:53:40 0 (0x0000)
Property WizardComplete is now = N Wizard 2014-09-11 08:53:40 0 (0x0000)
Property HALName is now = acpiapic ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting HAL information ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Getting network info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Checking network adapter: [00000000] Intel(R) 82579LM Gigabit Network Connection ZTIGather 2014-09-11 08:53:40 0 (0x0000)
MAC address = 44:37:E6:D0:8F:EF ZTIGather 2014-09-11 08:53:40 0 (0x0000)
IP Address = 10.26.33.23 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
IP Address = fe80::8d70:f039:f93f:e5e9 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Default Gateway = 10.26.32.1 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IPAddress001 is now = 10.26.33.23 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IPAddress002 is now = fe80::8d70:f039:f93f:e5e9 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property MacAddress001 is now = 44:37:E6:D0:8F:EF ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DefaultGateway001 is now = 10.26.32.1 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting network info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting DP info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine ConfigMgr distribution point ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Finished getting DP info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting WDS server info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine WDS server name, probably not booted from WDS. ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Finished getting WDS server info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Property HostName is now = MININT-KGJQ3PL ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting asset info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine asset tag via WMI. ZTIGather 2014-09-11 08:53:41 0 (0x0000)
FindFile(...\Microsoft.BDD.Utility.dll) Result : 0 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
RUN: regsvr32.exe /s "X:\Deploy\Tools\x86\Microsoft.BDD.Utility.dll" ZTIGather 2014-09-11 08:53:42 0 (0x0000)
FindFile: The file x64\Microsoft.BDD.Utility.dll could not be found in any standard locations. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
FindFile(...\Microsoft.BDD.Utility.dll) Result : 1 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
RUN: regsvr32.exe /s "" ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property AssetTag is now = ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SerialNumber is now = MJ24PLX ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Make is now = LENOVO ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Model is now = 3306G1F ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Product is now = MAHOBAY ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property UUID is now = 4C5C19C8-5CD9-11E3-8E8B-153233E31400 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Memory is now = 3891 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Architecture is now = X86 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property ProcessorSpeed is now = 3300 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property CapableArchitecture is now = AMD64 X64 X86 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsLaptop is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsDesktop is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsServer is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsUEFI is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsOnBattery is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsX86 is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsX64 is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsSLAT is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished getting asset info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Getting OS SKU info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Unable to determine Windows SKU while in Windows PE. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property OriginalArchitecture is now = ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Getting virtualization info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsHypervisorRunning is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsVT is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsNX is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Supports64Bit is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsHyperVRole is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
This computer does not appear to be a virtual machine (BIOS is 'LENOVO - 14c0'). ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsVM is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished getting virtualization info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Connection succeeded to MicrosoftVolumeEncryption ZTIGather 2014-09-11 08:53:42 0 (0x0000)
There are no encrypted drives ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsBDE is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Processing the PREINSTALL phase. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Determining the INI file to use. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished determining the INI file to use. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Using from [Settings]: Rule Priority = DEFAULT ZTIGather 2014-09-11 08:53:42 0 (0x0000)
------ Processing the [DEFAULT] section ------ ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property DEPLOYROOT is now = \\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: DEPLOYROOT =
\\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property USERID is now = Administrateur ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: USERID = Administrateur ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property USERDOMAIN is now = crdiq03 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: USERDOMAIN = crdiq03 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:43 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property KEYBOARDLOCALEPE is now = 0c0c:00001009 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: KEYBOARDLOCALEPE = 0c0c:00001009 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property SKIPBDDWELCOME is now = YES ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: SKIPBDDWELCOME = YES ZTIGather 2014-09-11 08:53:43 0 (0x0000)
------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Remapping variables. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property TaskSequenceID is now = ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property DeploymentType is now = NEWCOMPUTER ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Finished remapping variables. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
ZTIGather processing completed successfully. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Command completed, return code = 0 LiteTouch 2014-09-11 08:53:43 0 (0x0000)
Property WizardComplete is now = Y Wizard 2014-09-11 08:53:44 0 (0x0000)
About to run command: wpeutil.exe SetKeyboardLayout 0c0c:00001009 LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Command completed, return code = 0 LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Validating connection to \\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Mapped Network UNC Path Z: =
\\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Found Existing UNC Path Z: =
\\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Successfully established connection using supplied credentials. LiteTouch 2014-09-11 08:53:44 0 (0x0000)
About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /nolocalonly LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Property definition is now = WelcomeWiz_Initialize.xml Wizard 2014-09-11 08:53:44 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 Wizard 2014-09-11 08:53:44 0 (0x0000)
Property nolocalonly is now = ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIGather 2014-09-11 08:53:44 0 (0x0000)
------------------------- Object Initialization ------------------------- ZTIGather 2014-09-11 08:53:44 0 (0x0000)
------------------------- Initialization ------------------------- ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Synchronizing the environments. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Property DeployRoot is now = \\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Property DeployDrive is now = X: ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Finished synchronizing the environments. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Skipping local settings gathering because it has already been done. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Processing the PREINSTALL phase. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Determining the INI file to use. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Not Wizard = Faux Wizard 2014-09-11 08:53:44 0 (0x0000)
Property WizardComplete is now = N Wizard 2014-09-11 08:53:44 0 (0x0000)
Using DEFAULT VALUE: Ini file =
\\10.26.32.40\DeploymentShare$\Control\CustomSettings.ini ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Finished determining the INI file to use. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Added new custom property MYCUSTOMPROPERTY ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Using from [Settings]: Rule Priority = DEFAULT ZTIGather 2014-09-11 08:53:45 0 (0x0000)
------ Processing the [DEFAULT] section ------ ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property EVENTSERVICE is now = http://10.26.32.40:9800 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: EVENTSERVICE = http://10.26.32.40:9800 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property OSINSTALL is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: OSINSTALL = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property JOINWORKGROUP is now = GROUPE ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: JOINWORKGROUP = GROUPE ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property TIMEZONE is now = 035 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: TIMEZONE = 035 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property TIMEZONENAME is now = Eastern Standard Time ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: TIMEZONENAME = Eastern Standard Time ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property KEYBOARDLOCALE is now = 0c0c:00001009 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: KEYBOARDLOCALE = 0c0c:00001009 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property USERLOCALE is now = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: USERLOCALE = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property UILANGUAGE is now = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: UILANGUAGE = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCAPTURE is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCAPTURE = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:45 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPAPPLICATIONS is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPAPPLICATIONS = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCOMPUTERBACKUP is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCOMPUTERBACKUP = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPDOMAINMEMBERSHIP is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPDOMAINMEMBERSHIP = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCOMPUTERNAME is now = NO ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCOMPUTERNAME = NO ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPDEPLOYMENTTYPE is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPDEPLOYMENTTYPE = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPUSERDATA is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPUSERDATA = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPPACKAGEDISPLAY is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPPACKAGEDISPLAY = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPLOCALESELECTION is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPLOCALESELECTION = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000

Hi,
I agree with Damon.
Might be the ConfigMgr Driver Injector will help you.
This tool will allow you to capture installed drivers on your workstations and then will automatically import them in ConfigMgr 2012.
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MDT 2012 'Failed to save Environment to (80070057) Error during Windows 7 x64 Pro Deployment

Hi There,
I've been using MDT for a little while now, but I'm having problems successfully deploying an image to a batch of new laptops. The laptop HDD's are completely blank, and I am PXE booting using an x64 Litetouch Image via WDS. I have successfully captured
my image from a reference laptop (the same model that I'm trying to image), and I am now trying to deploy it using a standard client task sequence.
The 'Install operating System' phase seems to go ok, but then sits for quite some time at the 'Applying Unattend.xml' stage, then eventually, I get a general error 'Task Sequence Failed - 80004005'. I then exit MDT (it doesn't reboot as it should), and let
the laptop boot, which it does, and logs straight on into Windows, but gives me error along the lines of 'can't find the litetouch script', which I assume means MDT hasn't been able to copy it across. The laptop is however joined to our domain, and I pretty
much just have to tick the 'require a password to log on to this computer' box in user accounts, and all looks ok.
So in summary, the image is applying, but the laptop is not rebooting and running the final cleanup scripts.
I have already changed the SATA mode to IDE, instead of AHCI, having read this sometimes causes problems. I also read that systems with UEFI BIOS can also cause problems with MDT, but I'm not sure if this is the case.
I have edited my customsettings.ini, to copy log files back to my server, which it has done for me. Having looked at the logs (with CM Trace), I can see these errors:
Failed to save environment to (80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to persist execution state. Error 0x(80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save execution state and environment to local hard disk
TSManager 26/03/2014 15:48:09
1820 (0x071C)
The task sequence execution engine can not reboot the machine because we failed to persist execution environment
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Fatal error is returned in check for reboot request of the action (Restart computer).
Unspecified error (Error: 80004005; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
An error (0x80004005) is encountered in execution of the task sequence
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Task Sequence Engine failed! Code: 80004005
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Any help you can give me would be great, as I'd like to get this process running properly.
Thanks,
Sarah

You don't mention what kind of OS this is (Windows 7 Pro x64?)
This is a known issue/FAQ.
I would recommending using MDT 2012 (update 1) for UEFI machines.
Machines with uEFI 2.3.1 only support Windows 8.x.
http://technet.microsoft.com/en-us/library/hh824898.aspx
Recomendation: Convert the BIOS to CSM and/or upgrade to Windows 8.1 :^)
Keith Garner - keithga.wordpress.com

Pre-Provisioning Bit Locker in MDT 2012 SP1 while using MBAM 2.5 - No Pin Required

Does anyone have some step by step instructions for Pre-Provisioning Bit Locker. Through task sequences, we are currently able to bit locker the computers but it's the last set of tasks. I would like to Bit Locker the computer while no data is on the
disc so it's faster and then as its imaging, the files are already encrypted.
Currently:
Creates BIOS Password
TPM turned on and enabled (using CCTK)
Remove Password
Registry changes
Installing MBAM 2.5
Removing Registry Entries
Any help would be appreciated!
Thanks
Rick

Bitlocker Pre-Provisioning is available by default on MDT Litetouch...
If you just want to pre-provision the drive without letting MDT LiteTouch enable any protectors (let MBAM do that) then just run the following command after the "FOrmat and PArtition" step in the Task Sequence:
x:\windows\system32\Manage-BDE.exe c: -used
(OR whatever drive letter OS exists on in WinPE)
AS an alternative, I would add a step just before the "ENable Bitlocker (offline)" step in the task sequence:
    BDEInstallSuppress=NO
    isBDE=YES
then after the "Enable Bitlocker (offline)" step in the Task Sequence, I would set the following:
    isBDE=NO
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

MDT Config UEFI Specific disk and partition?

Installing Win8.1 with MDT2013 on UEFI enabled machines everything seems to be ok.. Until... Injecting drivers. The deployment cannot proceed because of destination disk. Sounds obvious because Uefi makes multiple partitions unlike non-uefi that can be installed
on the first partition.
I've created an extra step to the "Format and partition disk" and named it "Format and Partition Disk - UEFI". In this step I've set an option "Task sequence variable IsUEFI equals True". So when it is "True" the step
will format the drive in GPT (as is required for UEFI boot). This seems to work good. I see in the installation the step "Format and Partition Disk - UEFI" when it's a uefi machine, and the original step if it is a non uefi machine. Obviously the
original step will have also an option "Task sequence variable IsUEFI equals False".
The problem comes when we get to the step "Install Operating System". Here I made the same change like I did above. (added extra step with extra option:
The original step "Install Operating System" will have install location: "Specific disk and partition"
Disk 0 Partition 1.
The added step will have install location "Specific disk and partition"
Disk 0 Partition 3. (Because UEFI has multiple partitions)
For some reason the deployment will accept the step "Format and Partition Disk - UEFI" but in the install step it will take the "Install Operating System - Legacy" (so it will try to install to disk 0 partition 1 as I see in BCD log).
Is there any reason that the same condition works at the format step and not at the install step?
We choose the option install to "Specific disk and partition" because of problem when have the location set at "logical drive letter stored in a variable" (problem described:
link)

Solution in my case was going for the "logical drive letter stored in a variable" instead of "Specific disk and partition".
Note when applying this: must keep using "OSDisk" variable or it will throw errors (problem described in
this link)
So I deleted the "UEFI" steps, and renamed the "Install Operating System - Legacy" to before. Removed the query for the IsUEFI variable. MDT will automatic install to MBR or GPT based on device.

MDT 2012 U1 LTI Format incorrect partition

Similar Messages

Maybe you are looking for