MDT 2013 and HP Elite 8300 CMT don't work

Hi!
I've got a Problem with booting into PE 5.0 on HP 8300 CMT with MDT2013
I always get Boot error: 0xc000000e, Info: unexpected error
I have allready injected all drivers (storage, NIC, graphics) but it doesn't work.
Problem exists with Litetouch-Partition and even when booting from USB-Stick (which perfectly works on Prodesk 400)
Any clues?

It is not clear to me if you are getting this problem when booting up WinPE, or after the OS is placed on the local hard disk, and booting into
Are you booting into uEFI mode or CSM mode? Crack open your bdd.log file after booting into WInPE, and search for isuefi.
Additionally, did you modify the diskpartitioning layout for your task sequence? If so you may have not set things up right, create a new task sequence with the partition set to 100% (the default).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

  • MDT 2013 and Windows Embedded Standard 7

    Hi Guys
    I'm currently working on a Windows Embedded 7 Standard build and deployment.
    Looking at the support Matrix and the video from Johan, it looks like:
    MDT 2010 has support with the hacked LTIAPPLY script
    MDT 2012 onwards support Embedded POS Ready - no mention of Standard.
    Can you clarify:
    If WES7 is supported in MDT 2013.
    Is there a set of specific task sequence steps I should use for deploying WES7? I will still need to run the standard pre-install to clean disk, gather vars etc.
    I have written some post build scripts, which configures the FBWF state and installs final apps, which i'll run at the State Restore phase.
    Many Thanks
    Ian Fraser

    Can you share your experience with MDT 2013 and Windows 7 Embedded? Are you deploying the SCCM client to the clients? Any scripts you can post would be helpful.

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • I just updated to Adobe Reader 11.0.07 on my Mac 10.6.8 and now the video files don't work.  How do I uninstall the update and return to the previous version?

    I just updated to Adobe Reader 11.0.07 on my Mac OS version 10.6.8 and now the video files don't work.  How do I uninstall the update and return to the previous version?

    I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)."  My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac?  Sometimes when I try to view streaming video I get sound but no video.
    >

  • HT4528 I pulled my iPhone out of the docking station/speakers and now the ring tones don't work.  Anyone know a fix for this?

    Does anyone know if there is a fix for iPhone 4S when you pull it out of the docking station and now the ring tones don't work -- it only vibrates.

    Basic troubleshooting of the device is reset, restart, restore (first from backup then as new).  Has any of this been tried?
    Do other sounds work?
    Have you checked to see if the dock connector or headphone jack have debris in them?

  • CC: pgup and pgdn in the timeline don't work [was:pgup]

    In Premiere cc pgup and pgdn in the timeline don't work. What can be the problem?

    Pgup/down shows next or previous screen.
    Might want to zoom in on the timeline to get it to work.

  • I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    Follow the directions here:
    http://support.apple.com/kb/HT2109

  • Pause, back, and fwd (F6-8) keys don't work with iTunes. [Windows 7 64-bit]

    All my other F# keys work (I can adjust the screen brightness, adjust the volume...etc) but my Pause (F8), Back (F7) and Fwd (F9) keys don't work with iTunes. Though they DO work with Windows Media Player.
    How can I get them to work with iTunes?
    I'm using Windows 7 64-bit on a macbook pro.

    Same problem here.
    I'm using Macbook late '09 + Windows 7 64-bit + iTunes 10.0.1.22 for Windows,
    and my media function keys don't work. I don't use Windows Media Player though.

  • Arrows and page up/down keys don't work (also not in previous version)

    Arrow and page up/down keys don't work. Problem started a fe2w months ago; upgraded to Beta but it made no difference. Sorry to report that they work fine in Internet Explorer but i DO NOT want to switch. Thanks!

    IU'm curious if this is a 'getting used to Macs' issue;
    I'm on my first Mac [and OS X] as well, and to
    me tthese friggin keys "don't work" either.
    That is, they do not do anything useful, like
    go to the start or end of a text field. The
    keys do function, though. Home goes to the start
    of a document, and end goes to the end. Seems
    silly to me; how often do you go to the start
    or end of a document, versus the start or end
    of a line? Two points off your usability rating,
    Apple
    Anyways, if this [the keys doing different things
    under Mac] is the issue, see if Apple-Left Arrow
    and Apple-Right Arrow do what you're expecting
    Home and End to do.

  • MDT 2013 and RES Automation Manager

    Hi,
    In one of the first step of MDT I'm using a simple script that asks for the country code (e.g. NL), which I would like to store in an environment variable, which I can later on read into RES Automation Manager. But it seems that after MDT is finished and
    Windows starts up, the environment variable is gone.  Are there any other ways to accomplish this? I'm using it to install language specific applications from RES AM, after MDT is finished. The Windows language settings itself I set with the
    CustomSettings.ini, that is based on the same simple script
    [Settings]
    Priority=ByCountry, CountryAbbr,Model,Default
    Properties=CountryAbbr, CountryOU,CustomProperty
    [ByCountry]
    UserExit=ZTIGetCountry.vbs
    CountryAbbr=#GetCountryCode()#
    [NL]
    CountryOU=NL
    CountryOrRegion=31
    InputLocale=0409:00020409
    KeyboardLocale=nl-US
    UserLocale=nl-NL
    UILanguage=nl-NL
    TimeZoneName=W. Europe Standard Time
    ZTIGetCountryCode.vbs
    Function UserExit(sType, sWhen, sDetail, bSkip)
    oLogging.CreateEntry "entered UserExit ", LogTypeInfo
    UserExit = Success
    End Function
    Function GetCountryCode()
    Set objShell = CreateObject("WScript.Shell")
    Set objEnv = objShell.Environment("SYSTEM")
    GetCountryCode = InputBox("Fill in Country Code (NL DE DA FR PT); If default, use None")
    objEnv("MDT_Language") = GetCountryCode
    Set objShell = Nothing
    Set objEnv = Nothing
    End Function
    Any idea what I can do else??
    Thanks,
    Mario

    Hi, this looks quite similar to my blog post I did some time ago:
    MDT 2012 LTI Deployment, Regional and Locale settings based on #chars of Hostname
    The trick in your specific case is to either, not reboot your machine, or to set the installation of RES Automation Manager right after the reboot.
    Basically MDT clean's up it's act after it is finished. This also means the environment variables which are stored in a .dat file in the C:\MININT folder are removed after MDT has finished.
    So either you need to find a way to perform your RES AM job, during the MDT task sequence, or set or dump the environment variables to a file are temporarily variable which RES AM can use.
    Here are some articles that will help you get further:
    MDT and RES Automation Manager – Let’s come together (in Sweet Harmony)
    Creating custom variables in MDT 2013
    Finding All References to MDT Variables in a Deployment Share: VariableDocumentor
    v1.0
    Dumping Task Sequence Variables
    Cheers!
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • MDT 2013 and WES7

    Hi,
    I would like to know if anyone has succesfully deployed a WES7 or WES8 image using MDT 2013 litetouch. There seems to be support for doing this with WEP7 (POSready) but what about the Standard version?
    I can make use of the startnet.cmd and imagex tool from a Windows PE, but it would be nice if MDT could be used to deploy images and apps to WES7 (or WES8)
    BR
    Morten

    Hi,
    I would like to know if anyone has succesfully deployed a WES7 or WES8 image using MDT 2013 litetouch. There seems to be support for doing this with WEP7 (POSready) but what about the Standard version?
    I can make use of the startnet.cmd and imagex tool from a Windows PE, but it would be nice if MDT could be used to deploy images and apps to WES7 (or WES8)
    BR
    Morten

  • MDT 2013 and USMT 5

    I've had MDT 2012 set up and working fine (with USMT 4.0), and have been utilizing the USMT via batch file to copy profiles and transfer them manually in some cases.  I'm needing to move some people to Win 8.1 and between computers with 8.1, so I updated
    to MDT 2013.  As I figured, it broke everything I had going.  After putting back the USMT files where they were, the batch files no longer work as they must be "run as administrators".  I added my domain admin account as a local admin,
    and even tried a plain local admin account.  No go.  For the life of me, I have no idea what the hang up is.  Below is the batch file, what am I missing since this used to work fine?  I also cannot simply run the scanstate.exe, and it flashes
    a cmd prompt and closes before I can see what it's doing.
    if exist "c:\usmt" then Goto SkipUSMT
    echo d | xcopy \\server\folder\deployment\usmt\amd64 c:\usmt
    cd /d c:\usmt\
    set /P Input=Computer Name?
    scanstate \\server\folder\deployment\captures\%Input% /i:migdocs.xml /i:migapp.xml /v:13 /uel:90
    :SkipUSMT

    Gives me nothing more than what I had:
    2014-11-06 15:02:05, Info                  [0x000000] SCANSTATE.EXE Version 6.3.9600.17237[gle=0x000000b7]
    2014-11-06 15:02:05, Info                  [0x000000] USMT Started at 2014/11/06:15:02:05.262
    2014-11-06 15:02:05, Info                  [0x000000] Command line: scanstate \\SERVER\folder\captures\Computer /l:Scan.log /i:migdocs.xml /i:migapp.xml /v:13 /uel:90
    2014-11-06 15:02:05, Info                  [0x000000] Failed.
    2014-11-06 15:02:05, Info                  [0x000000]   Administrator privileges are required to run this tool.
    2014-11-06 15:02:05, Info                  [0x000000] USMT Completed at 2014/11/06:15:02:05.263
    2014-11-06 15:02:05, Info                  [0x000000] Entering MigShutdown method
    2014-11-06 15:02:05, Info                  [0x000000] Leaving MigShutdown method
    2014-11-06 15:02:05, Info                  [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------
    2014-11-06 15:02:05, Info                  [0x000000] * USMT error code 34: 
    2014-11-06 15:02:05, Info                  [0x000000] +-----------------------------------------------------------------------------------------
    2014-11-06 15:02:05, Info                  [0x000000] | Administrator privileges are required to run this tool.
    2014-11-06 15:02:05, Info                  [0x000000] +-----------------------------------------------------------------------------------------

  • Problem with ztisetbackground.wsf in MDT 2013 and Windows 8.1

    Has anyone found a way to get ztisetbackground.wsf to work with a Windows 8.1 build after the WinPE phase?  It works fine with Windows 7 builds.
    Ad(Thanks)vance!
    JJ

    Unfortunately not.  Doesn't look like it will be fixed in the upcoming release of MDT 2013 Update 1 based on the following post...
    http://blogs.technet.com/b/mniehaus/archive/2015/03/03/mdt-2013-update-1-preview-what-s-changed.aspx.

  • Imessage and lots of other things don't work

    Has anybody solved this issue with imessage and facetime not activating?
    I'm having various other problems which I believe are all connected. When my date and time are set to auto, it wants to set my time zone to another time zone. Notifications are not showing unless I actually open the apps to find out. For example my facebook does not display on the icon that I have a message unless I open up the app to sync it. However I can make emails sync if I double tap home and force quit the email app. That does not work for any other apps though. Also my phone will not connect to youtube, says cannot connect.
    So in short these don't work: imessage, facetime, notifications (push), youtube, date and time auto selection
    My phone is an iphone 4 16gb, ios5.1 installed
    I've sought out the net now for the past month whenever I get a chance. Tried many things that people have suggested..Seems some people it has worked for and many, not. I also spoke to Apple on my own dime and seriously thier tech didn't seem to know what was going on...I could've worked there from what he seemed to know.
    Tried these: change DNS, restart, restore, reset all settings, reset individual settings, remove and clean sim, home & sleep button reset, phone bill is paid up, itunes account is paid up, turned off settings (imessage, facetime) - airplane mode - force close everything - restart - turn on settings again...and prob a whack more things.
    Has anybody solved this, any more ideas? I don't see a whole lot on the discussion board about it :/

    Eklutna wrote:
    Anyway, it didn't add back my own prefs and the like, so I had to manually drag 'em all back to where they belonged. Took forever! But that's not the problem (I hope); I mention it here because many of my aps now request a password (the old one) to open.
    Eklutna
    I think you have an Ownership and Permission problem. You should Repair Permission first, even-though, I don't think it's going to work.
    Which are the Ownership and Permissions details for your Home folder?

  • How do I get sounds back? I don't know when an email arrives and my apps with songs don't work

    How do I get my sounds back? My apps with songs don't work and I don't know when a message or email arrives.
    Thanks

    Is it on mute? There is a switch on the side which may be mute or rotation lock. If it locks the rotation, double tap the home button and swipe your finger to the right. You should see volume, brightness, etc... On the far left is a button to mute or lock rotation. Make sure it is not on. If you still can't hear anything, go to settings> general> sounds> ringer and alerts and slide the dot to the right.
    Hope this helps!
    Caleb.

Maybe you are looking for