MDT 2013 & SCCM 2012 R2 - Slow MDT Download

MDT Use toolkit package inside of OSD takes a very long time to download.<br>
MDT is only around 40mb total size, so i can't understand why it's taking so long on only this section.
Typically the use toolkit package where MDT downloads locally inside of OSD takes around 5-7 minutes, each of the files are small in size but the download time is ridiculous! I transfer a 6bg .wim file in 2 minutes when it comes to applying the image so
i know the network speed is ok, something is going wrong with the MDT package and downloading it.
Running a normal TS without MDT runs fine, and the image installs ok.
Pulling my hair out with how long MDT takes, it's adding on an extra 15-20 minutes onto my sequence just by downloading toolkit files!
Anyone had similar or know what I may be able to try?
The setup is a lab environment. I have a standalone primary, with local SQL, 1 DP & 3 physical clients.

I too have seen significant slowness downloading the MDT 2013 Toolkit package since upgrading my DEV environment (physical server and clients) to SCCM 2012 R2. It takes almost 20 minutes
to download the package.
Watching SMSTS.LOG I can see that it taking about 2 second to download each file in the package. 617 files multiplied by 2 seconds comes out to right around 20 minutes.
Last night I installed the most recent hotfix (KB2910552) but I just confirmed that it did not improve the speed of the MDT toolkit package download.
I’m planning on opening a case with MS support today.
I'll report back with my findings.
Any update here? Can I ask if anyone is seeing the issue when using HTTPS?
@mgouldthorp1 - Have you raised a case yet and if so any updates?
Thanks.

Similar Messages

Applications not being deployed during task sequence - MDT 2013 + SCCM 2012 R2

Hi everyone,
I have recently integrated MDT2013 with my SCCM 2012 R2 and I am trying to move away from OSD in SCCM and switch to MDT. I managed to get a blank image deployed and now I am trying to tweak CustomSettings.ini to install applications based on the default
gateway and model. For some reason, the apps are getting pulled but not deployed. Here is what I have in the files:
Settings Package - CustomSettings.ini
[Settings]
Priority=DefaultGateway, Model, Default
Properties=MyCustomProperty
[OptiPlex 9020]
Applications001=Mozilla Firefox
[DefaultGateway]
192.168.XXX.254=Poland
192.168.XXX.254=London
[Poland]
Applications001=ESET
[Default]
DoCapture=No
OSInstall=Y
SkipCapture=YES
SkipAdminPassword=NO
SkipProductKey=YES
Administrators001=myDomain\adminGroup
Applications001=Skype
Applications002=Office Professional Plus 2010
When the TS runs, I can see it's getting all the apps from the list, here is a snippet from ZTIGather.log
Using from [Settings]: Rule Priority = DEFAULTGATEWAY, MODEL, DEFAULT
------ Processing the [DEFAULTGATEWAY] section ------
Match found for default gateway 192.168.XXX.254, retrieving settings.
------ Processing the [Poland] section ------
Property APPLICATIONS001 is now = ESET
Added value from [Poland]: APPLICATIONS = ESET
------ Processing the [OptiPlex 9020] section ------
Property APPLICATIONS001 is now = ESET
Property APPLICATIONS002 is now = Mozilla Firefox
Added value from [OptiPlex 9020]: APPLICATIONS = Mozilla Firefox
------ Processing the [DEFAULT] section ------
Property OSINSTALL is now = Y
Using from [DEFAULT]: OSINSTALL = Y
Property DOCAPTURE is now = No
Using from [DEFAULT]: DOCAPTURE = No
Property SKIPCAPTURE is now = YES
Using from [DEFAULT]: SKIPCAPTURE = YES
<Message containing password has been suppressed>
<Message containing password has been suppressed>
Property SKIPPRODUCTKEY is now = YES
Using from [DEFAULT]: SKIPPRODUCTKEY = YES
Property APPLICATIONS001 is now = ESET
Property APPLICATIONS002 is now = Mozilla Firefox
Property APPLICATIONS003 is now = Skype
Added value from [DEFAULT]: APPLICATIONS = Skype
Property APPLICATIONS001 is now = ESET
Property APPLICATIONS002 is now = Mozilla Firefox
Property APPLICATIONS003 is now = Skype
Property APPLICATIONS004 is now = Office Professional Plus 2010
Added value from [DEFAULT]: APPLICATIONS = Office Professional Plus 2010
Property ADMINISTRATORS001 is now = myDomain\adminGroup
Added value from [DEFAULT]: ADMINISTRATORS = myDomain\adminGroup
------ Done processing CustomSettings.ini ------
So the settings do get picked up and selected. ZTICoalesce.log also shows the apps picked up:
Coalesce pattern to be used: Applications
Coalesce base variable to use: CoalescedApps
Added value ESET-KRKLON from APPLICATIONS001 to the list
Added value Mozilla Firefox from APPLICATIONS002 to the list
Added value Skype from APPLICATIONS003 to the list
Added value Office Professional Plus 2010 from APPLICATIONS004 to the list
Property CoalescedApps01 is now = ESET
Property CoalescedApps02 is now = Mozilla Firefox
Property CoalescedApps03 is now = Skype
Property CoalescedApps04 is now = Office Professional Plus 2010
ZTICoalesce processing completed successfully.
Now when I go to the smsts.log file, I can see this:
App policy for 'ESET' not received. Make sure the application is marked for dynamic app install
Policy download failed, hr=0x80004005
and later
Failed to run the action: Install Application.
Unspecified error (Error: 80004005; Source: Windows)
After that, no other apps are mentioned and seems like the failure on ESET drops the whole sequence and moves forward. I can see later the default admin being added correctly.
Any ideas what I may be missing here? Especially on the failed policy download?
Thanks
Jakub

HI,
"App policy for 'ESET' not received. Make sure the application is marked for dynamic app install"
Is the ESET application deployed? it sounds like it could be the check box on the application "Allow this application to be installed from install application task sequence action without beeing deployed" that is missing? If the application isn't
deployed this checkbox must be ticked.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 SP1 and MDT 2012 Task Sequence Templates, MDT File/Settings Packages

We're setting up SCCM 2012 integrated with MDT 2012 for our OSD. My main issue is finding actual reference material for the MDT task sequence templates when integrated with SCCM. The MDT documentation has a lot of information on variables and task sequences
outside of SCCM integration.
One thing I'd love to find information on is what's actually going on during an MDT Client Task Sequence template. I found this http://social.technet.microsoft.com/Forums/en-US/645a77b2-5be6-431d-818c-57d24b1435cc/understanding-mdt-task-sequence?forum=configmgrosd but
it doesn't delve into the kind of detail I'm looking for. I can dig up information through the MDT reference material on some things, but I just can't find anything out there that actually walks you through an SCCM/MDT task sequence template. For instance,
under State Restore what is being referenced in Install Software with base variable name PACKAGES, vs Install Applications and base variable name COALESCED APPS. And, where are you supposed to put these applications? That's just a specific example, I'm hoping
to find some kind of walkthrough.
Two things I'm hazy on are the MDT packages. What exactly are the MDT Settings Package, and the MDT Files Package? What are they used for? What benefits do you get out of using them? And, how exactly do you use them? I know one of them has something to do
with customsettings.ini, but what's the point of using SCCM with MDT if you still have to muck around in the customsettings.ini file?
Either way, it seems like there are a lot of references to SCCM task sequences, and a lot of references to MDT task sequences. But, not together. Which is a bit annoying since the MDT-integrated task sequence templates are very obviously different than either
SCCM or MDT by itself. Any help would be appreciated, even just information on where to look. Maybe I'm just really bad at finding reference material for SCCM/MDT. Thanks.

When MDT integrated with SCCM, We need the following MDT components to be created:
MDT Boot image
MDT Toolkit Files
MDT Settings
The MDT boot image (for example) gives you extra abilities over the standard ConfigMgr boot image such as the ability to display a HTA Refer here:
http://www.windows-noob.com/forums/index.php?/forum/98-frontends-and-web-services/
MDT Files once created, you will find UDIWizard_Config.Xml file in which you can start User driven Installation OSD using UDI designer.
Refer these links for better understanding:
http://www.windows-noob.com/forums/index.php?/topic/5131-using-sccm-2012-rc-in-a-lab-part-16-integrating-mdt-2012-rc1-with-configuration-manager-2012/
http://www.windows-noob.com/forums/index.php?/topic/5221-using-sccm-2012-rc-in-a-lab-part-17-using-mdt-2012-rc1-within-configuration-manager-2012/
http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
Thanks, Prabha G
Thanks for the quick reply. But, what about the MDT Settings Package? Also, both have a pretty big folder structure for each package. Surely it does more than just provide a couple xml and ini files? I'm not looking for anyone to spoon-feed me the information,
but at least a pointer in the right direction for finding the reference material. It seems for SCCM/MDT integration you have to go all over the place finding scraps of information to put together.
Also, any info on the SCCM/MDT task sequence templates? Thanks.

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

SCCM 2012 R2 With MDT 2012 AND MDT 2013 Side by Side

Currently we're running 2012 R2 CU3 with MDT 2012 integrated into it. We're looking at upgrading to MDT 2013 (whatever the latest update is). What I'm wondering, and can't seem to find any information on, is if we can continue to use our MDT 2012 boot
.wims/OSD Task Sequences/etc until such time as we create and test new ones or are we going to have to update everything right away?

Are you sure you are using MDT *2013* with ConfigMgr 2012 *R2*? That's not a supported configuration and I think there are multiple technical problems with this combination.
The task sequences themselves don't change -- because they are ConfigMgr task sequences -- but the MDT tasks must be updated to use the MDT 2013 tasks. Boot image use is partially dependent upon the OS you are deploying however only WinPE 3.1 and WinPE 5.0
based boot images are supported in R2.
Jason | http://blog.configmgrftw.com | @jasonsandys
Did you mean to ask if we were running MDT 2012 with ConfigMgr 2012 R2? Then yes we are. We did the upgrade from SP1 CU2 to R2 CU3 a couple of weeks ago but haven't upgraded MDT to 2013 yet. That's our next step but we also don't want to take down/break imaging
capability if we can help it (major college, staff/students constantly breaking stuff, etc).

SCCM 2012 R2 and MDT 2013 Task Sequence Bugs

Any links that list issues with the default MDT 2013 deploy task sequence: UEFI, local administrator password, Machine OU settings, OS installation partition and computer replace scenario.

Hi,
If you want to file bugs or feature requests, you'll need to go to the MDT and ConfigMgr connect site:
https://connect.microsoft.com/ConfigurationManagervnext/Feedback
Cheers!
If this post is helpful please click "Mark for answer", thanks! Kind regards

Certain Runbook won't execute from SCCM 2012 R2 w/ MDT 2013

We have SCCM 2012 R2 and SCOrch 2012 R2.
There's an OSD TS that has many runbooks. 90% of the time everything runs fine, but there's 10% of the computers that would fail on a specific runbook (while executing other runbooks just fine).
There's no log history that this runbook had ever been executed on these clients
Unexpected response from web service: 400 Bad Request
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code></code>
<message xml:lang="en-US">Error reading syndication item: 'An error occurred while parsing EntityName. Line 1, position 852.'.</message>
</error>
FAILURE ( 10801 ): Unable to create Orchestrator job for the specified runbook.
Now if I run the runbook directly from web services and type in the parameters manually, it runs fine.

We're you able to find a solution? I'm running into the same error...

Sccm 2012 migration and MDT

In our current environment we have sccm 2007 and MDT 2013 separate to deploy workstation OS images. We have MDT just referencing SCCM package ID's (package path on the DP) to install applications during the build process.
We are currently migrating to SCCM 2012 and because the DP folder structure has changed now - i.e. 'SCCMContentLib' can we still use MDT separately and reference the 'DataLib' directory in MDT or is the best option to fully integrate MDT in SCCM?

Hi,
The following two blog could help you to understand SCCMContentLib structure.
An adventure in the sccmcontentlib - single instance store
http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
Understanding the Configuration Manager Content Library
http://blogs.technet.com/b/configmgrteam/archive/2013/10/29/understanding-the-configuration-manager-content-library.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MDT 2013 & SCCM 2012R2

Hi
i have SCCM 2012R2 up and running and wanted to integrate it with MDT 2013.
Just out of curiosity, once MDT has been installed, do we really need to download and install WAIK?
What is the benefit of having it in MDT? i can see under MDT Components the status is: Required.
Thanks, M@

Hi,
The MDT integration doesn't need the WAIK. The only prerequisite is ConfigMgr console.
After you installed MDT you need to run the integration wizzard which will add new features in ConfigMgr console such as MDT task sequences, new step types in task sequence, you're not (unless you want to use it) supposed to launch MDT console, it's just
about extending ConfigMgr console features.
Regards,
Mickael, My technet galleries contributions : ConfigMgr driver injector : http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d SCCM Collection splitter : http://gallery.technet.microsoft.com/SCCM-Collection-Splitter-e1c82b06 ConfigMgr
TS Tools : http://gallery.technet.microsoft.com/TSTools-f9b01357

Multicasting Issues - MDT 2013 - Server 2012 R2

Hello!
I'm having some issues with multicasting on a large university network. Our setup is like this:
WDS role setup on VM with Server 2012 R2
Deployment shares hosted on the same VM - Using MDT 2013 to manage Deployment Shares
VM is on a different VLAN from client computers. - IP Helpers to connect between the VLANs
Multicast namespace was created successfully.
All switches between server and client are managed, IGMPv3 compatible, and have snooping enabled3
MDT Images are custom WIMs, with no setup files
When I run a deployment on any number of clients, I get the message saying "Attempting multicast transfer". The clients show up listed in the WDS Multicast Transmission. Then the clients drop off the server, and begin unicasting. Unicast speeds
are excellent. Our 10GB images copy in about 10 mins. But we plan to do 30-40 systems at a time, and I believe that could cause some issues with so many individual sessions running...
I've noticed under our network adapter properties that Microsoft Network Adapter Multiplexor Protocol is unchecked. Not sure if that is related?
I have copied multicast information from the BDD.log file on one of the failed clients. That can be found below.
Any help/advice will be greatly appreciated! Thank you!
Edit: I likely posted this to the wrong place. I have reposted this to the MDT forum. Thanks!
<![LOG[LTI applying image \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4\Windows 7 (x64) - 4.0.wim using ImageX]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41023 sent: LTI applying image \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4\Windows 7 (x64) - 4.0.wim using ImageX]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property SourcePath is now = \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Windows 7 (x64) - Vers 4]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 504)]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 504)]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 504)]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Windows Deployment Services Multicast Client [Version 6.3.9600.17237]
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Copyright (c) Microsoft Corporation. All rights reserved.
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Started.
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Complete [0x800705B4].
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Operation Failed. [0x800705B4].
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > This operation returned because the timeout period expired.
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > ]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = -2147023436]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer could not be completed, rc = -2147023436, falling back to using \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4\Windows 7 (x64) - 4.0.wim]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">

Hi Kyle T.Johnson,
Could you try to put a test client to your WDS server VLAN then monitor this issue again.
Best Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Problem with uninstalling Office 2013 SCCM 2012 R2

Hi, I am in a process of learning SCCM 2012 R2. Currently I am focused on application management so I started by deploying Office 2013 to test collection with only one member - direct rule membership by computer name. Deployment process finished without
any problems - I kicked off installation from Software Center on client machine. Having installed Office 2013 I tried to uninstall it but I got an error: Setup can't find or validate an installation file. Please try reinstalling . . . . In SCCM server I entered:
setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
in uninstall program line. Uninstall.xml file is nothing special:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
I tried to uninstall Office 2013 from cmd line but I got the same error. I can manually uninstall Office 2013 by running setup.exe file and following wizard but that does not mean anything to me except it proves installation files are not corrupted. Office
2013 installation .iso file is downloaded from MS Volume Licensing Service Center.

In SCCM server I entered: setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
in uninstall program line.
I've responded in your other thread:
https://social.technet.microsoft.com/Forums/en-US/fd735611-95bf-46f6-8add-2229a52e3e93/i-can-not-uninstall-office-2013-from-command-line?forum=officeitpro
Hi, your command-line is not valid - you are using a "relative" path for the <config.xml> and that is not supported..
http://technet.microsoft.com/en-us/library/cc178956(v=office.15).aspx#BKMK_config
Note: You must use a fully qualified path. Setup does not recognize relative paths with /config.
Instead, I suggest that you copy your "Uninstall.xml" file to the same folder where setup.exe exists, then, adjust your command-line like this:
setup /uninstall ProPlus /config Uninstall.xml
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Using MDT 2013 for deploying Software from MDT Server to PC Client automatically and silently ?

I have a trouble about deploying software from MDT 2013 server to PC Client , Can we using MDT 2013 for deploying software automatically and silently , that Users/Clients don't have to click "next,next" to install software ?
If you have a solutions to deploying it , please share me about that solutions ?
Thanks.

you can make software silently with boot opción:
with chocolatey opensource.
or make software with switches
here link to help you:
http://blogs.itpro.es/octaviordz/2014/05/29/instalando-aplicaciones-con-chocolatey
http://blogs.itpro.es/octaviordz/2014/06/05/integrando-chocolatey-a-mdt-2013-e-instalando-aplicaciones-de-forma-desatendida-en-windows-8-1/
http://blogs.itpro.es/octaviordz/2014/10/31/probando-chocolatey-en-windows-10
http://blogs.itpro.es/octaviordz/2012/07/10/aplicaciones-desatendidas
MVP Jesús Octavio Rdz http://blogs.itpro.es/octaviordz

SCCM 2012 R2 Update not Downloading

Hi
i had install SCCM 2012 R2 and WSUS on the same server and i configure the software update point component .(End Point Protection) when I'm trying
to download software update, i click on All software updates repository right click and run synchronization i cant see any update.
wsyncmgr.log :
Thread terminated by service request. $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:41:50.922-330><thread=5384 (0x1508)>
SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 5976 (0x1758). $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.078-330><thread=2736 (0xAB0)>
Log level 2 $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.309-330><thread=5976 (0x1758)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 15:19:48.428-330><thread=5976 (0x1758)>
Please help

WCm log error
Remote configuration failed on WSUS Server.   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=BDC.mydomain.com SITE=NAV PID=2648 TID=5680 GMTDATE=Tue Jul 15 08:11:13.273 2014 ISTR0="BDC.mydomain.com" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Setting new configuration state to 3 (WSUS_CONFIG_FAILED)   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Waiting for changes for 49 minutes   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)

SCCM 2012 Console - slow performance when browsing in Applications Deployments

Hi There,
we are experiencing a slow Console (SCCM 2012 R2 CU1, one Primary) if we go to Software Library > Applications and than clicking on Deployments. It takes up to 2 Minutes if we get results of the Deployments which depend to the Application. It Doesn´t
matter if there are 0 or 20 Deployments.
It only occurs if the SCCM Admins do not have full Admin rights in SCCM.
The reason must be the Security Scopes, because all Admins have full rights to be a "Application Deployment Manager".
Can somebody help me to get rid of this Problem?
Regards
Florian

Hello Joyce,
thanks for the tip! I can see this Query in SMSProv.Log, if i click on the Register Deployment at the Application. Here it takes about two minutes:
Execute SQL =select all SMS_DeploymentSummary.AssignmentID,SMS_DeploymentSummary.CI_ID,SMS_DeploymentSummary.CollectionID,SMS_DeploymentSummary.CollectionName,SMS_DeploymentSummary.CreationTime,SMS_DeploymentSummary.DeploymentID,SMS_DeploymentSummary.DeploymentIntent,SMS_DeploymentSummary.DeploymentTime,SMS_DeploymentSummary.DesiredConfigType,SMS_DeploymentSummary.EnforcementDeadline,SMS_DeploymentSummary.FeatureType,SMS_DeploymentSummary.ModelName,SMS_DeploymentSummary.ModificationTime,SMS_DeploymentSummary.NumberErrors,SMS_DeploymentSummary.NumberInProgress,SMS_DeploymentSummary.NumberOther,SMS_DeploymentSummary.NumberSuccess,SMS_DeploymentSummary.NumberTargeted,SMS_DeploymentSummary.NumberUnknown,SMS_DeploymentSummary.ObjectTypeID,SMS_DeploymentSummary.PackageID,SMS_DeploymentSummary.PolicyModelID,SMS_DeploymentSummary.ProgramName,SMS_DeploymentSummary.SoftwareName,SMS_DeploymentSummary.SummarizationTime,SMS_DeploymentSummary.SummaryType
from fn_DeploymentSummary(1031) AS SMS_DeploymentSummary where (((SMS_DeploymentSummary.DeploymentID in (select all SUIP0.ObjectKey from RBAC_InstancePermissions AS SUIP0 where (SUIP0.AdminID in (16777219,16777243,0) AND ((GrantedOperations&1)
= 1 AND SUIP0.ObjectTypeID in (200)))) AND SMS_DeploymentSummary.ObjectTypeID in (200)) OR (SMS_DeploymentSummary.DeploymentID in (select all SUIP0.ObjectKey from RBAC_InstancePermissions AS SUIP0 where (SUIP0.AdminID in (16777219,16777243,0) AND
((GrantedOperations&1) = 1 AND SUIP0.ObjectTypeID in (201)))) AND SMS_DeploymentSummary.ObjectTypeID in (201))) AND SMS_DeploymentSummary.ModelName = N'ScopeId_74CC6EA1-E5C5-4424-B8EF-DDE952A3FC7A/Application_5661d887-1908-4565-8da0-097430692825') order
by SMS_DeploymentSummary.DeploymentTime SMS Provider 25.11.2014 08:19:43 7244 (0x1C4C)
Those Entries will be generated SMSAdminUI.Log
[7, PID:6880][11/25/2014 08:19:43] :The performance counter '# WQL queries active' was not found
[7, PID:6880][11/25/2014 08:19:43] :The performance counter '# WQL queries active' was not found
Regards
Florian

MDT 2013 & SCCM 2012 R2 - Slow MDT Download

Similar Messages

Maybe you are looking for